Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-20-gc8ae067/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.69 beaver arm-multi_v7_defconfig : FAILED 1:48.68 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.15 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.40 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.78 omap5uevm arm-multi_lpae_defconfig : FAILED 2:21.61 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:05.22 pi arm-multi_lpae_defconfig : FAILED 2:04.14 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.04 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:18.85 arndale arm-exynos_defconfig : passed 1:28.98 arndale arm-multi_v7_defconfig : passed 1:26.72 arndale arm-multi_lpae_defconfig : passed 1:36.10 bbb arm-omap2plus_defconfig : passed 1:40.24 bbb arm-multi_v7_defconfig : passed 1:15.04 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:48.47 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:51.70 beagleboard-x15 arm-multi_lpae_defconfig : warnings 1:04.27 capri arm-bcm_defconfig : passed 0:48.33 capri arm-multi_v7_defconfig : passed 0:58.66 chitra powerpc-ppc64_defconfig : passed 2:25.12 colombus arm-sunxi_defconfig : passed 2:22.27 colombus arm-multi_v7_defconfig : passed 2:35.51 colombus arm-multi_lpae_defconfig : passed 2:33.07 cosmic arm-imx_v6_v7_defconfig : passed 3:27.09 cosmic arm-multi_v7_defconfig : passed 3:52.53 cubie arm-sunxi_defconfig : passed 0:49.62 cubie arm-multi_v7_defconfig : passed 0:52.74 cubie2 arm-sunxi_defconfig : passed 0:51.26 cubie2 arm-multi_v7_defconfig : passed 1:03.50 cubie2 arm-multi_lpae_defconfig : passed 1:02.79 cubox arm-multi_v7_defconfig : passed 1:21.12 cubox arm-mvebu_v7_defconfig : passed 1:18.17 dalmore arm-tegra_defconfig : warnings 1:27.45 dalmore arm-multi_v7_defconfig : warnings 1:29.84 dalmore arm-multi_lpae_defconfig : warnings 1:43.65 jetsontk1 arm-tegra_defconfig : warnings 0:53.18 jetsontk1 arm-multi_v7_defconfig : warnings 0:49.42 jetsontk1 arm-multi_lpae_defconfig : warnings 0:56.34 pandaes arm-omap2plus_defconfig : warnings 1:37.20 pandaes arm-multi_v7_defconfig : passed 1:45.96 parallella arm-multi_v7_defconfig : passed 2:49.84 pi arm-exynos_defconfig : passed 2:10.79 pit arm-exynos_defconfig : passed 2:13.97 pit arm-multi_v7_defconfig : passed 2:25.82 pit arm-multi_lpae_defconfig : passed 2:26.77 seaboard arm-tegra_defconfig : warnings 0:58.51 seaboard arm-multi_v7_defconfig : warnings 0:56.47 seattle arm64-defconfig : passed 2:22.37 snow arm-exynos_defconfig : passed 2:04.75 snow arm-multi_v7_defconfig : passed 2:01.78 snow arm-multi_lpae_defconfig : passed 2:00.39 snowball arm-u8500_defconfig : passed 2:06.05 snowball arm-multi_v7_defconfig : passed 1:58.02 trimslice arm-tegra_defconfig : warnings 2:42.88 trimslice arm-multi_v7_defconfig : warnings 1:52.68 wandboard arm-multi_v7_defconfig : passed 1:16.96
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.61 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:28.40 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:21.96 hummingboard arm-multi_v7_defconfig : OFFLINE 2:13.73 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:56.02 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.75 sama5 arm-sama5_defconfig : OFFLINE 2:20.23 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:25.55 socfpga arm-socfpga_defconfig : OFFLINE 2:17.21 socfpga arm-multi_v7_defconfig : OFFLINE 2:21.10
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.408085] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.415041] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421561] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428505] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434091] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441113] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451111] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462898] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.469515] [drm] No driver support for vblank timestamp query. [ 3.475461] drm drm: No connectors reported connected with modes [ 3.481469] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.506890] Console: switching to colour frame buffer device 128x48 [ 3.519039] drm drm: fb0: frame buffer device [ 3.538375] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.549190] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.555654] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.561063] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.568892] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.583384] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.590135] hub 1-0:1.0: USB hub found [ 3.593906] hub 1-0:1.0: 1 port detected [ 3.598871] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.604288] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.612029] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.623379] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.630045] hub 2-0:1.0: USB hub found [ 3.633813] hub 2-0:1.0: 1 port detected [ 3.642605] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.656408] vdd_sata,avdd_plle: disabling [ 3.661131] usb1_vbus: disabling [ 3.665217] Waiting for root device /dev/mmcblk0p1... [ 3.943384] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.882027] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.424192] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.431232] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.436839] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.444360] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.454360] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.467251] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.473890] [drm] No driver support for vblank timestamp query. [ 6.479893] drm drm: No connectors reported connected with modes [ 6.485920] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.511487] Console: switching to colour frame buffer device 128x48 [ 6.523307] drm drm: fb0: frame buffer device [ 6.550778] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.560085] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.566558] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.571995] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.579965] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.600775] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.608391] hub 1-0:1.0: USB hub found [ 6.612187] hub 1-0:1.0: 1 port detected [ 6.617005] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.622448] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.630320] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.650769] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.658254] hub 2-0:1.0: USB hub found [ 6.662053] hub 2-0:1.0: 1 port detected [ 6.670222] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.688450] vdd_sata,avdd_plle: disabling [ 6.692953] usb1_vbus: disabling [ 6.696363] ALSA device list: [ 6.699321] #0: NVIDIA Tegra Beaver [ 6.703564] Waiting for root device /dev/mmcblk0p1... [ 6.980775] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.966218] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.794328] Key type dns_resolver registered [ 1.798649] Registering SWP/SWPB emulation handler [ 1.806586] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.811209] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.818626] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.825769] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.832396] [drm] No driver support for vblank timestamp query. [ 1.838302] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.844649] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.849824] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.856814] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.862457] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.862486] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.879412] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.880384] hub 1-3:1.0: USB hub found [ 1.880613] hub 1-3:1.0: 3 ports detected [ 1.882052] max98090 1-0010: MAX98090 REVID=0x43 [ 1.884395] max98090 1-0010: use default 2.8v micbias [ 1.906785] mmc1: new DDR MMC card at address 0001 [ 1.909506] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.914248] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.924759] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.928869] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.939788] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.940632] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.947435] mmcblk1: p1 p2 [ 1.948839] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.979404] VDD10_HDMI_1.0V: disabling [ 1.980148] vdd_g3d: disabling [ 1.981213] BUCK8_2.8V: disabling [ 1.985349] ALSA device list: [ 1.986832] #0: Odroid-U3 [ 1.990873] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:47]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.972604] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979164] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987201] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998348] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006437] smsc95xx v1.0.4 [ 2.009918] ldo9: bypassed regulator has no supply! [ 2.015050] ldo9: failed to get the current voltage(-517) [ 2.020727] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.036282] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.061809] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.068204] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.094760] smps9: Bringing 0uV into 2100000-2100000uV [ 2.100957] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 42:23:db:4c:f5:d7 [ 2.125713] ldo9: bypassed regulator has no supply! [ 2.130834] ldo9: failed to get the current voltage(-517) [ 2.136502] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.150621] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.179630] smps9: Bringing 0uV into 2100000-2100000uV [ 2.198318] ldo9: bypassed regulator has no supply! [ 2.203445] ldo9: failed to get the current voltage(-517) [ 2.209104] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.223614] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:37 UTC (946684957) [ 2.239521] pbias_mmc_omap5: disabling [ 2.243475] vmmcsdio_fixed: disabling [ 2.248014] Waiting for root device /dev/mmcblk1p2... [ 2.360990] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.496877] hub 1-2:1.0: USB hub found [ 2.500896] hub 1-2:1.0: 3 ports detected [ 2.506715] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.534719] smps9: Bringing 0uV into 2100000-2100000uV [ 2.553393] ldo9: bypassed regulator has no supply! [ 2.558518] ldo9: failed to get the current voltage(-517) [ 2.564181] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:19]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:20]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.973040] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979559] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987557] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998666] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006785] ldo9: bypassed regulator has no supply! [ 2.011908] ldo9: failed to get the current voltage(-517) [ 2.017583] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031796] smsc95xx v1.0.4 [ 2.035825] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.059254] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.065662] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.083031] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, c2:99:9c:c0:df:2e [ 2.101922] smps9: Bringing 0uV into 2100000-2100000uV [ 2.120581] ldo9: bypassed regulator has no supply! [ 2.125700] ldo9: failed to get the current voltage(-517) [ 2.131367] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.145462] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.177050] smps9: Bringing 0uV into 2100000-2100000uV [ 2.195685] ldo9: bypassed regulator has no supply! [ 2.200800] ldo9: failed to get the current voltage(-517) [ 2.206467] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.220991] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.236885] pbias_mmc_omap5: disabling [ 2.240826] vmmcsdio_fixed: disabling [ 2.245350] Waiting for root device /dev/mmcblk1p2... [ 2.323496] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.459344] hub 1-2:1.0: USB hub found [ 2.463353] hub 1-2:1.0: 3 ports detected [ 2.469222] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.497190] smps9: Bringing 0uV into 2100000-2100000uV [ 2.515855] ldo9: bypassed regulator has no supply! [ 2.520980] ldo9: failed to get the current voltage(-517) [ 2.526643] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.999043] ldo9: bypassed regulator has no supply! [ 4.004173] ldo9: failed to get the current voltage(-517) [ 4.009856] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.032728] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.040312] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.046853] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.053181] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.060054] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.069648] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.079155] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.086207] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.092345] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.098637] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.105499] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.115093] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.124588] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.131633] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.159912] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.166210] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.173077] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.182664] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.192155] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.199189] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.220579] smps9: Bringing 0uV into 2100000-2100000uV [ 4.249860] ldo9: bypassed regulator has no supply! [ 4.254967] ldo9: failed to get the current voltage(-517) [ 4.260653] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.280766] hctosys: unable to open rtc device (rtc0) [ 4.286057] sr_init: No PMIC hook to init smartreflex [ 4.291568] sr_init: platform driver register failed for SR [ 4.319238] pbias_mmc_omap5: disabling [ 4.323181] vmmcsdio_fixed: disabling [ 4.329352] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533505] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539859] isl29018 7-0044: Failed to read 1: -6 [ 1.544441] isl29018 7-0044: regmap initialization fails: -6 [ 1.555332] NET: Registered protocol family 10 [ 1.559770] sit: IPv6 over IPv4 tunneling driver [ 1.563339] NET: Registered protocol family 17 [ 1.567349] can: controller area network core (rev 20120528 abi 9) [ 1.573539] NET: Registered protocol family 29 [ 1.577927] can: raw protocol (rev 20120528) [ 1.582177] can: broadcast manager protocol (rev 20120528 t) [ 1.587819] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593540] Key type dns_resolver registered [ 1.597870] ThumbEE CPU extension supported. [ 1.601787] Registering SWP/SWPB emulation handler [ 1.611651] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617130] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623498] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628872] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638976] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649290] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654737] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664921] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671105] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676484] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686201] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708790] Waiting for root device /dev/mmcblk0p1... [ 1.712672] mmc0: tuning execution failed: -5 [ 1.716731] mmc0: error -5 whilst initialising MMC card [ 2.583293] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597446] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602905] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609276] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614660] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:02]: got exception: timeout ~$off
[PYBOOT] [pi 02:03]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533432] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539785] isl29018 7-0044: Failed to read 1: -6 [ 1.544370] isl29018 7-0044: regmap initialization fails: -6 [ 1.555253] NET: Registered protocol family 10 [ 1.559697] sit: IPv6 over IPv4 tunneling driver [ 1.563270] NET: Registered protocol family 17 [ 1.567278] can: controller area network core (rev 20120528 abi 9) [ 1.573468] NET: Registered protocol family 29 [ 1.577855] can: raw protocol (rev 20120528) [ 1.582105] can: broadcast manager protocol (rev 20120528 t) [ 1.587746] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593468] Key type dns_resolver registered [ 1.597799] ThumbEE CPU extension supported. [ 1.601716] Registering SWP/SWPB emulation handler [ 1.611569] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617051] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623417] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628792] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638890] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649210] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654657] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664844] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671024] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676403] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686120] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708683] Waiting for root device /dev/mmcblk0p1... [ 1.712560] mmc0: tuning execution failed: -5 [ 1.716616] mmc0: error -5 whilst initialising MMC card [ 2.583229] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597344] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602808] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609179] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614562] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:01]: got exception: timeout ~$off
[PYBOOT] [pi 02:02]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: cannot execute "/sbin/ge[ 20.224116] mmcblk0: error -110 sending status command, retrying tty" INIT: cannot execute "/sb[ 20.232975] mmcblk0: error -110 sending status command, retrying in/getty" INIT: Id "1" respawn[ 20.241859] mmcblk0: error -110 sending status command, aborting ing too fast: disabled for 5 minutes INIT: cannot execute "/sb[ 20.253482] mmcblk0: error -110 sending status command, retrying in/getty" [ 20.262421] mmcblk0: error -110 sending status command, retrying [ 20.270876] mmcblk0: error -110 sending status command, aborting [ 20.281933] mmcblk0: error -110 sending status command, retrying [ 20.290370] mmcblk0: error -110 sending status command, retrying [ 20.298828] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.310000] mmcblk0: error -110 sending status command, retrying y" [ 20.318806] mmcblk0: error -110 sending status command, retrying [ 20.327255] mmcblk0: error -110 sending status command, aborting [ 20.338268] mmcblk0: error -110 sending status command, retrying [ 20.346703] mmcblk0: error -110 sending status command, retrying [ 20.355181] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes [ 20.520517] mmcblk0: error -110 sending status command, retrying [ 20.528978] mmcblk0: error -110 sending status command, retrying [ 20.537435] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.456155] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter