Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160502/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 10:49.79 bbb arm-omap2plus_defconfig : FAILED 1:55.10 bbb arm-multi_v7_defconfig : FAILED 2:00.83 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:17.74 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:52.95 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.68 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:56.60 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:01.13 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.09 cosmic arm-imx_v6_v7_defconfig : FAILED 2:02.34 cosmic arm-multi_v7_defconfig : FAILED 2:10.66 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:06.99 dalmore arm-tegra_defconfig : FAILED 1:54.43 dalmore arm-multi_v7_defconfig : FAILED 2:01.25 dalmore arm-multi_lpae_defconfig : FAILED 2:03.40 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:53.05 jetsontk1 arm-tegra_defconfig : FAILED 0:29.53 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:52.81 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.56 omap5uevm arm-multi_v7_defconfig : FAILED 2:05.76 omap5uevm arm-multi_lpae_defconfig : FAILED 2:12.74 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:06.88 seaboard arm-tegra_defconfig : FAILED 1:56.32 seaboard arm-multi_v7_defconfig : FAILED 1:55.59 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:52.67 snow arm-multi_v7_nosmp_defconfig : FAILED 1:48.80 snowball arm-u8500_defconfig : FAILED 3:09.67 snowball arm-multi_v7_defconfig : FAILED 2:55.72 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:00.71

Successful boards:

apc arm-vt8500_v6_v7_defconfig : warnings 1:07.00 arndale arm-exynos_defconfig : warnings 1:32.96 arndale arm-multi_v7_defconfig : warnings 1:22.27 arndale arm-multi_lpae_defconfig : warnings 1:28.60 capri arm-bcm_defconfig : warnings 0:51.20 capri arm-multi_v7_defconfig : warnings 0:52.78 capri arm-multi_v7_nosmp_defconfig : warnings 0:57.85 chitra powerpc-ppc64_defconfig : warnings 2:01.49 colombus arm-sunxi_defconfig : warnings 2:35.65 colombus arm-multi_v7_defconfig : warnings 2:49.66 colombus arm-multi_lpae_defconfig : warnings 2:46.06 cubie arm-sunxi_defconfig : warnings 0:54.93 cubie arm-multi_v7_defconfig : warnings 0:50.25 cubie arm-multi_v7_nosmp_defconfig : warnings 1:05.40 cubie2 arm-sunxi_defconfig : warnings 0:50.56 cubie2 arm-multi_v7_defconfig : warnings 0:48.77 cubie2 arm-multi_lpae_defconfig : warnings 0:55.71 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:55.11 cubox arm-multi_v7_defconfig : warnings 1:11.56 cubox arm-mvebu_v7_defconfig : warnings 1:11.90 cubox arm-multi_v7_nosmp_defconfig : warnings 1:06.11 hummingboard arm-imx_v6_v7_defconfig : warnings 1:37.51 hummingboard arm-multi_v7_defconfig : warnings 1:31.73 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:08.33 jetsontk1 arm-multi_v7_defconfig : warnings 0:50.81 jetsontk1 arm-multi_lpae_defconfig : warnings 0:53.85 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:43.03 pandaes arm-omap2plus_defconfig : warnings 2:49.40 pandaes arm-multi_v7_defconfig : warnings 1:40.44 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:50.79 pi arm-exynos_defconfig : warnings 2:12.68 pi arm-multi_v7_defconfig : warnings 2:17.04 pi arm-multi_lpae_defconfig : warnings 3:14.53 pi arm-multi_v7_nosmp_defconfig : warnings 2:09.27 pit arm-exynos_defconfig : warnings 2:13.67 pit arm-multi_v7_defconfig : warnings 2:11.77 pit arm-multi_lpae_defconfig : warnings 2:21.09 pit arm-multi_v7_nosmp_defconfig : warnings 2:11.71 seattle arm64-defconfig : warnings 2:22.58 snow arm-exynos_defconfig : warnings 2:06.90 snow arm-multi_v7_defconfig : warnings 2:12.36 snow arm-multi_lpae_defconfig : warnings 2:00.24 trimslice arm-tegra_defconfig : warnings 1:36.64 wandboard arm-imx_v6_v7_defconfig : warnings 1:20.34 wandboard arm-multi_v7_defconfig : warnings 1:05.41 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:07.96

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:12.26 beaver arm-multi_v7_defconfig : OFFLINE 2:17.29 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.80 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.73 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:20.52 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:25.88 parallella arm-multi_v7_defconfig : OFFLINE 2:23.26 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.82 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:47.83 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:53.35 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:52.31 sama5 arm-sama5_defconfig : OFFLINE 2:17.96 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:30.56 socfpga arm-socfpga_defconfig : OFFLINE 2:22.85 socfpga arm-multi_v7_defconfig : OFFLINE 2:31.90 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.34 trimslice arm-multi_v7_defconfig : OFFLINE 2:28.47 trimslice arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.33

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

SPEAr-ehci: EHCI SPEAr driver ehci-st: EHCI STMicroelectronics driver ehci-exynos: EHCI EXYNOS driver ehci-atmel: EHCI Atmel driver tegra-ehci: Tegra EHCI driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-omap3: OHCI OMAP3 driver SPEAr-ohci: OHCI SPEAr driver ohci-st: OHCI STMicroelectronics driver ohci-atmel: OHCI Atmel driver xhci-hcd xhci-hcd.2.auto: xHCI Host Controller xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.2.auto: xHCI Host Controller xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver exynos-tmu 10060000.tmu: Regulator node (vtmu) not found sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Synopsys Designware Multimedia Card Interface Driver dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. dwmmc_exynos 12200000.mmc: Using internal DMA controller. dwmmc_exynos 12200000.mmc: Version ID is 241a dwmmc_exynos 12200000.mmc: DW MMC controller at irq 102,32 bit host data width,128 deep fifo dwmmc_exynos 12200000.mmc: 1 slots initialized dwmmc_e [PYBOOT] [arndale 10:45]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 10:46]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.794576] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.861013] Synopsys Designware Multimedia Card Interface Driver [ 1.868791] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.878651] ledtrig-cpu: registered to indicate activity on CPUs [ 1.885893] usbcore: registered new interface driver usbhid [ 1.891812] usbhid: USB HID core driver [ 1.903714] NET: Registered protocol family 10 [ 1.910249] sit: IPv6 over IPv4 tunneling driver [ 1.916384] NET: Registered protocol family 17 [ 1.921140] can: controller area network core (rev 20120528 abi 9) [ 1.927771] NET: Registered protocol family 29 [ 1.932480] can: raw protocol (rev 20120528) [ 1.936988] can: broadcast manager protocol (rev 20120528 t) [ 1.942972] can: netlink gateway (rev 20130117) max_hops=1 [ 1.949715] Key type dns_resolver registered [ 1.954535] omap_voltage_late_init: Voltage driver support not added [ 1.961508] ThumbEE CPU extension supported. [ 1.966065] Registering SWP/SWPB emulation handler [ 2.011057] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.017484] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.025212] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.033833] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.041677] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.049441] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.057177] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.064508] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.071570] hctosys: unable to open rtc device (rtc0) [ 2.084988] Waiting for root device /dev/mmcblk0p2... [ 2.090713] mmc1: new high speed MMC card at address 0001 [ 2.097505] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.102782] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.109435] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.118070] mmcblk1: p1 p2

[PYBOOT] [bbb 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:59]: got exception: timeout ~$off

[PYBOOT] [bbb 02:00]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2

[PYBOOT] [bbb 02:15]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:16]: got exception: timeout ~$off

[PYBOOT] [bbb 02:17]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.279024] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.285143] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.291469] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.298344] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.307938] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.317435] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.324452] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.367828] ledtrig-cpu: registered to indicate activity on CPUs [ 2.376475] oprofile: using arm/armv7 [ 2.381440] Initializing XFRM netlink socket [ 2.386564] NET: Registered protocol family 10 [ 2.396946] sit: IPv6 over IPv4 tunneling driver [ 2.405860] NET: Registered protocol family 17 [ 2.410785] NET: Registered protocol family 15 [ 2.416012] Key type dns_resolver registered [ 2.420851] omap_voltage_late_init: Voltage driver support not added [ 2.427586] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.436054] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.445667] ThumbEE CPU extension supported. [ 2.450296] Registering SWP/SWPB emulation handler [ 2.455318] SmartReflex Class3 initialized [ 2.527219] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.534445] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.545093] mmc1: new high speed MMC card at address 0001 [ 2.558114] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.566294] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.574134] hctosys: unable to open rtc device (rtc0) [ 2.579574] sr_init: No PMIC hook to init smartreflex [ 2.585265] sr_init: platform driver register failed for SR [ 2.623197] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.631422] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.645710] mmcblk1: p1 p2 [ 2.663869] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.401403] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.416144] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.423221] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.445640] rtc-ds1307 2-006f: SET TIME! [ 2.451374] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.458126] rtc-ds1307 2-006f: 64 bytes nvram [ 2.462739] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.470978] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.476766] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.485007] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.494178] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.501052] hub 1-0:1.0: USB hub found [ 2.505008] hub 1-0:1.0: 1 port detected [ 2.509410] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.515192] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.523301] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.532331] hub 2-0:1.0: USB hub found [ 2.536304] hub 2-0:1.0: 1 port detected [ 2.542416] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.606700] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.624797] aic_dvdd_fixed: disabling [ 2.629490] Waiting for root device /dev/mmcblk0p1... [ 2.662219] mmc1: new high speed MMC card at address 0001 [ 2.668251] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.673155] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.679511] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.686436] mmcblk1: p1 [ 2.815145] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.971444] hub 1-1:1.0: USB hub found [ 2.975436] hub 1-1:1.0: 4 ports detected [ 3.055174] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 3.083436] hub 2-1:1.0: USB hub found [ 3.087424] hub 2-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:54]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:55]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.402030] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.416814] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.423885] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.450561] rtc-ds1307 2-006f: SET TIME! [ 2.456321] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.463068] rtc-ds1307 2-006f: 64 bytes nvram [ 2.467682] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.475973] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.481758] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.489990] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.499159] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.506042] hub 1-0:1.0: USB hub found [ 2.509995] hub 1-0:1.0: 1 port detected [ 2.514400] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.520179] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.528315] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.537333] hub 2-0:1.0: USB hub found [ 2.541301] hub 2-0:1.0: 1 port detected [ 2.547397] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.611662] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.629362] aic_dvdd_fixed: disabling [ 2.634065] Waiting for root device /dev/mmcblk0p1... [ 2.657176] mmc1: new high speed MMC card at address 0001 [ 2.663207] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.668115] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.674477] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.681394] mmcblk1: p1 [ 2.820058] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.976437] hub 1-1:1.0: USB hub found [ 2.980423] hub 1-1:1.0: 4 ports detected [ 3.060089] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 3.088425] hub 2-1:1.0: USB hub found [ 3.092406] hub 2-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:59]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:00]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 4.518570] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.524863] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.531763] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.542150] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.547014] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.553307] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.560172] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.569763] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.579262] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.586309] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.627685] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.633990] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.640863] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.650460] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.659951] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.666999] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.673124] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.679436] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.686282] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.695864] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.705360] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.712402] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.757966] hctosys: unable to open rtc device (rtc0) [ 4.763272] sr_init: No PMIC hook to init smartreflex [ 4.768830] sr_init: platform driver register failed for SR [ 4.815027] aic_dvdd_fixed: disabling [ 4.819291] ldousb: disabling [ 4.823628] mmc1: new high speed MMC card at address 0001 [ 4.831677] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.837094] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.843946] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.852326] mmcblk1: p1 [ 4.859882] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:51]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:52]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

eth0: device MAC address fa:33:a1:e3:52:42 RX IPC Checksum Offload disabled No MAC Management Counters available IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/fa:33:a1:e3:52:42 Sending on LPF/eth0/fa:33:a1:e3:52:42 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.815900] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.890113] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.900435] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.974654] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.984977] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 27.059135] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 27.069457] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 31.143671] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 31.154019] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 35.228184] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 35.238506] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 39.312729] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.323054] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.397239] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.407562] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.481780] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.492105] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.566325] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.576648] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.650862] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.661210] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.735436] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.745756] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.819965] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.830308] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.904531] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.914854] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.989016] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.999340] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 76.073564] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 76.083886] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 80.158039] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 80.168362] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.277379] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.351362] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.361438] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.435419] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.445498] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.519478] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.529578] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.603557] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.613647] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.687634] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.697710] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.771692] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.781769] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.855752] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.865829] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.939805] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.949880] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.023905] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.033974] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.107949] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.118026] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.192001] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.202076] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.276049] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.286142] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.360121] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.370204] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.444184] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.454266] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.528232] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.538305] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.612285] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.622356] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:08]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:09]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:05]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:06]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 3.031314] can: netlink gateway (rev 20130117) max_hops=1 [ 3.038263] Key type dns_resolver registered [ 3.044633] ThumbEE CPU extension supported. [ 3.049021] Registering SWP/SWPB emulation handler [ 3.062351] usb1_vbus: supplied by vdd-sys-5v0 [ 3.071875] usb2_vbus: supplied by vdd-sys-5v0 [ 3.091537] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.115680] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.122445] [drm] No driver support for vblank timestamp query. [ 3.137613] mmc1: new high speed MMC card at address 0001 [ 3.147777] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.156116] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.165957] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.175177] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.184809] mmcblk1: p1 [ 3.302521] Console: switching to colour frame buffer device 240x75 [ 3.389979] drm drm: fb0: frame buffer device [ 3.411955] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.427224] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.432819] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.441751] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.456997] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.467243] hub 1-0:1.0: USB hub found [ 3.471244] hub 1-0:1.0: 1 port detected [ 3.481338] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.495010] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.557762] dvdd_ts: disabling [ 3.560862] usb1_vbus: disabling [ 3.564235] vdd_cam_1v8_reg: disabling [ 3.571507] Waiting for root device /dev/mmcblk0p1... [ 3.781994] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.759764] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 48.993337] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:01]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:02]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.025442] can: netlink gateway (rev 20130117) max_hops=1 [ 3.032411] Key type dns_resolver registered [ 3.038838] ThumbEE CPU extension supported. [ 3.043224] Registering SWP/SWPB emulation handler [ 3.059762] usb1_vbus: supplied by vdd-sys-5v0 [ 3.069615] usb2_vbus: supplied by vdd-sys-5v0 [ 3.085777] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.111563] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.118375] [drm] No driver support for vblank timestamp query. [ 3.139627] mmc1: new high speed MMC card at address 0001 [ 3.149608] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.157548] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.167062] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.176521] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.186534] mmcblk1: p1 [ 3.299784] Console: switching to colour frame buffer device 240x75 [ 3.387485] drm drm: fb0: frame buffer device [ 3.408262] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.423577] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.429167] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.438070] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.453298] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.463664] hub 1-0:1.0: USB hub found [ 3.467657] hub 1-0:1.0: 1 port detected [ 3.478157] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.492572] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.554806] dvdd_ts: disabling [ 3.558056] usb1_vbus: disabling [ 3.561321] vdd_cam_1v8_reg: disabling [ 3.568750] Waiting for root device /dev/mmcblk0p1... [ 3.783346] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.760845] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.647870] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB input: gpio-keys as /devices/soc0/gpio-keys/input/input0 mmcblk1: p1 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 5.684404] Bluetooth: RFCOMM socket layer initialized [ 5.689635] Bluetooth: RFCOMM ver 1.11 [ 5.693453] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.698944] Bluetooth: BNEP socket layer initialized [ 5.704002] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.710003] Bluetooth: HIDP socket layer initialized [ 5.716307] Key type dns_resolver registered [ 5.725806] Registering SWP/SWPB emulation handler [ 5.743521] usb1_vbus: supplied by vdd-sys-5v0 [ 5.752113] usb2_vbus: supplied by vdd-sys-5v0 [ 5.769533] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.800134] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.806936] [drm] No driver support for vblank timestamp query. [ 5.985030] Console: switching to colour frame buffer device 240x75 [ 6.071554] drm drm: fb0: frame buffer device [ 6.114140] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.123455] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.129314] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 6.138563] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 6.164088] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 6.178147] hub 1-0:1.0: USB hub found [ 6.182110] hub 1-0:1.0: 1 port detected [ 6.196171] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 6.212263] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.301315] dvdd_ts: disabling [ 6.304549] usb1_vbus: disabling [ 6.307815] vdd_cam_1v8_reg: disabling [ 6.312384] ALSA device list: [ 6.315440] #0: NVIDIA Tegra Dalmore [ 6.321251] Waiting for root device /dev/mmcblk0p1... [ 6.504048] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.538416] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.084045] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:53]: Done. Board jetsontk1-arm-tegra_defconfig failure log: -------------------------------------------------

[ 4.530766] [<c010bb94>] (__irq_svc) from [<c01080b4>] (arch_cpu_idle+0x38/0x3c) [ 4.538159] [<c01080b4>] (arch_cpu_idle) from [<c015a3a4>] (cpu_startup_entry+0x1bc/0x218) [ 4.546415] [<c015a3a4>] (cpu_startup_entry) from [<8010150c>] (0x8010150c) [ 4.553365] CPU2: stopping [ 4.556075] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D W 4.6.0-rc6-next-20160502 #1 [ 4.564671] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 4.570943] [<c010fa6c>] (unwind_backtrace) from [<c010b028>] (show_stack+0x10/0x14) [ 4.578683] [<c010b028>] (show_stack) from [<c0348550>] (dump_stack+0x88/0x9c) [ 4.585900] [<c0348550>] (dump_stack) from [<c010e21c>] (handle_IPI+0x16c/0x180) [ 4.593289] [<c010e21c>] (handle_IPI) from [<c010146c>] (gic_handle_irq+0x84/0x88) [ 4.600849] [<c010146c>] (gic_handle_irq) from [<c010bb94>] (__irq_svc+0x54/0x90) [ 4.608318] Exception stack(0xee881f88 to 0xee881fd0) [ 4.613364] 1f80: 00000001 00000000 00000000 c0118fe0 ee880000 c0d0249c [ 4.621531] 1fa0: 00000000 00000000 c0c565b8 c0d02500 c0d5bc98 c0d02508 00000000 ee881fd8 [ 4.629695] 1fc0: c01080b0 c01080b4 60000013 ffffffff [ 4.634744] [<c010bb94>] (__irq_svc) from [<c01080b4>] (arch_cpu_idle+0x38/0x3c) [ 4.642137] [<c01080b4>] (arch_cpu_idle) from [<c015a3a4>] (cpu_startup_entry+0x1bc/0x218) [ 4.650392] [<c015a3a4>] (cpu_startup_entry) from [<8010150c>] (0x8010150c) [ 4.657343] CPU1: stopping [ 4.660052] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.6.0-rc6-next-20160502 #1 [ 4.668649] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 4.674921] [<c010fa6c>] (unwind_backtrace) from [<c010b028>] (show_stack+0x10/0x14) [ 4.682661] [<c010b028>] (show_stack) from [<c0348550>] (dump_stack+0x88/0x9c) [ 4.689877] [<c0348550>] (dump_stack) from [<c010e21c>] (handle_IPI+0x16c/0x180) [ 4.697265] [<c010e21c>] (handle_IPI) from [<c010146c>] (gic_handle_irq+0x84/0x88) [ 4.704825] [<c010146c>] (gic_handle_irq) from [<c010bb94>] (__irq_svc+0x54/0x90) [ 4.712294] Exception stack(0xee87ff88 to 0xee87ffd0) [ 4.717341] ff80: 00000001 00000000 00000000 c0118fe0 ee87e000 c0d0249c [ 4.725508] ffa0: 00000000 00000000 c0c565b8 c0d02500 c0d5bc98 c0d02508 60000013 ee87ffd8 [ 4.733671] ffc0: c01080b0 c01080b4 60000013 ffffffff [ 4.738720] [<c010bb94>] (__irq_svc) from [<c01080b4>] (arch_cpu_idle+0x38/0x3c) [ 4.746109] [<c01080b4>] (arch_cpu_idle) from [<c015a3a4>] (cpu_startup_entry+0x1bc/0x218) [ 4.754364] [<c015a3a4>] (cpu_startup_entry) from [<8010150c>] (0x8010150c) [ 4.761322] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 4.761322]

[PYBOOT] [jetsontk1 00:27]: got exception: panic ~$off

[PYBOOT] [jetsontk1 00:29]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.934008] Key type dns_resolver registered [ 1.938319] Registering SWP/SWPB emulation handler [ 1.951164] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.953464] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.960881] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.968035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.974626] [drm] No driver support for vblank timestamp query. [ 1.980596] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.986935] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.992126] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.999260] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.008091] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.017731] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 2.024154] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.031618] mmc1: new DDR MMC card at address 0001 [ 2.036035] max98090 1-0010: MAX98090 REVID=0x43 [ 2.036683] hub 1-3:1.0: USB hub found [ 2.036888] hub 1-3:1.0: 3 ports detected [ 2.036925] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 2.037272] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.037709] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.037900] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.039143] mmcblk1: p1 p2 [ 2.075378] max98090 1-0010: use default 2.8v micbias [ 2.084508] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.092893] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.127208] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.143611] VDD10_HDMI_1.0V: disabling [ 2.144294] vdd_g3d: disabling [ 2.145362] BUCK8_2.8V: disabling [ 2.149298] ALSA device list: [ 2.151007] #0: Odroid-U3 [ 2.154614] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:50]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:52]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.205193] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.211725] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.219824] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.231002] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.239077] smsc95xx v1.0.4 [ 2.242524] ldo9: bypassed regulator has no supply! [ 2.247664] ldo9: failed to get the current voltage(-517) [ 2.253341] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.268903] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.294421] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.300816] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.327488] smps9: Bringing 0uV into 2100000-2100000uV [ 2.333737] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 22:05:5c:d2:e8:1e [ 2.358388] ldo9: bypassed regulator has no supply! [ 2.363505] ldo9: failed to get the current voltage(-517) [ 2.369173] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.383270] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.412299] smps9: Bringing 0uV into 2100000-2100000uV [ 2.431095] ldo9: bypassed regulator has no supply! [ 2.436221] ldo9: failed to get the current voltage(-517) [ 2.441888] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.456380] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:26 UTC (946684946) [ 2.472069] pbias_mmc_omap5: disabling [ 2.476021] vmmcsdio_fixed: disabling [ 2.480583] Waiting for root device /dev/mmcblk1p2... [ 2.593611] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.729393] hub 1-2:1.0: USB hub found [ 2.733409] hub 1-2:1.0: 3 ports detected [ 2.739224] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.767350] smps9: Bringing 0uV into 2100000-2100000uV [ 2.786140] ldo9: bypassed regulator has no supply! [ 2.791271] ldo9: failed to get the current voltage(-517) [ 2.796939] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:12]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.170756] smps9: Bringing 0uV into 2100000-2100000uV [ 2.176478] mmc0: new high speed MMC card at address 0001 [ 2.182488] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 2.187403] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.193914] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.202088] ldo1: Bringing 0uV into 1800000-1800000uV [ 2.208610] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.216669] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.227767] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.235503] smsc95xx v1.0.4 [ 2.238810] ldo9: bypassed regulator has no supply! [ 2.243936] ldo9: failed to get the current voltage(-517) [ 2.249607] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.264902] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.290501] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, c6:da:8b:f3:d6:3c [ 2.302898] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.309317] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.339721] smps9: Bringing 0uV into 2100000-2100000uV [ 2.358439] ldo9: bypassed regulator has no supply! [ 2.363551] ldo9: failed to get the current voltage(-517) [ 2.369216] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.383679] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.399375] pbias_mmc_omap5: disabling [ 2.403326] vmmcsdio_fixed: disabling [ 2.407877] Waiting for root device /dev/mmcblk1p2... [ 2.531170] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.667057] hub 1-2:1.0: USB hub found [ 2.671066] hub 1-2:1.0: 3 ports detected [ 2.676929] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.704901] smps9: Bringing 0uV into 2100000-2100000uV [ 2.723643] ldo9: bypassed regulator has no supply! [ 2.728776] ldo9: failed to get the current voltage(-517) [ 2.734446] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:05]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

ldo1: Bringing 0uV into 1800000-1800000uV ldo2: Bringing 0uV into 2800000-2800000uV ldo4: Bringing 0uV into 1800000-1800000uV ldo7: Bringing 0uV into 2000000-2000000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz smsc95xx v1.0.4 omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:04:44 UTC (946685084) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 36:09:79:b9:1e:0e omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 4.164654] ldo9: bypassed regulator has no supply! [ 4.169785] ldo9: failed to get the current voltage(-517) [ 4.175455] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.198436] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.205976] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.212581] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.218901] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.225748] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.235364] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.244871] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.251935] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.258068] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.264374] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.271231] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.280828] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.290326] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.297351] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.338427] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.344726] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.351591] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.361184] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.370670] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.377713] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.397973] smps9: Bringing 0uV into 2100000-2100000uV [ 4.426124] ldo9: bypassed regulator has no supply! [ 4.431253] ldo9: failed to get the current voltage(-517) [ 4.436919] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.457102] hctosys: unable to open rtc device (rtc0) [ 4.462421] sr_init: No PMIC hook to init smartreflex [ 4.467931] sr_init: platform driver register failed for SR [ 4.496032] pbias_mmc_omap5: disabling [ 4.500004] vmmcsdio_fixed: disabling [ 4.506127] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.097883] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 2.104900] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 2.104920] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.104941] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 2.105161] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 2.121503] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.122072] hub 3-0:1.0: USB hub found [ 2.122100] hub 3-0:1.0: 1 port detected [ 2.157741] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.164383] [drm] No driver support for vblank timestamp query. [ 2.209868] mmc2: switch to bus width 8 failed [ 2.210157] mmc2: switch to bus width 4 failed [ 2.210172] mmc2: new high speed MMC card at address 0001 [ 2.210726] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.210974] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.211175] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.212579] mmcblk2: p3 [ 2.223450] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.231365] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.234242] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.241597] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.267175] Console: switching to colour frame buffer device 170x48 [ 2.345967] drm drm: fb0: frame buffer device [ 2.356846] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.366557] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.373382] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.380482] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.394738] vdd_1v5: disabling [ 2.397825] vdd_1v2: disabling [ 2.402126] mmc0: new SDIO card at address 0001 [ 3.104936] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 3.116353] Waiting for root device /dev/mmcblk0p3... [ 58.581629] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB hub 3-0:1.0: 1 port detected mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmcblk2: p3 mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:52]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 4.630183] can: raw protocol (rev 20120528) [ 4.634450] can: broadcast manager protocol (rev 20120528 t) [ 4.640170] can: netlink gateway (rev 20130117) max_hops=1 [ 4.675657] Bluetooth: RFCOMM socket layer initialized [ 4.680821] Bluetooth: RFCOMM ver 1.11 [ 4.684586] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.689963] Bluetooth: BNEP socket layer initialized [ 4.694925] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.700946] Bluetooth: HIDP socket layer initialized [ 4.706636] Key type dns_resolver registered [ 4.712394] Registering SWP/SWPB emulation handler [ 4.728140] VDDIO_HDMI: supplied by vdd_5v0 [ 4.735042] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.747039] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.753515] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.759018] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.767235] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.785388] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.795088] hub 3-0:1.0: USB hub found [ 4.798982] hub 3-0:1.0: 1 port detected [ 4.813514] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.820201] [drm] No driver support for vblank timestamp query. [ 4.943781] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.965411] Console: switching to colour frame buffer device 170x48 [ 5.004922] drm drm: fb0: frame buffer device [ 5.035374] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.042547] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 5.050277] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 5.069187] vdd_1v5: disabling [ 5.072241] vdd_1v2: disabling [ 5.075450] ALSA device list: [ 5.078412] #0: NVIDIA Tegra Seaboard [ 5.082928] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:54]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@snow:~# cat /proc/cmdline cat /proc/cmdlineUnable to handle kernel paging request at virtual address c10b3478 pgd = c0204000 [c10b3478] *pgd=4100041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc6-next-20160502 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xc10b3478 LR is at cpu_pm_pmu_notify+0x70/0xb4 pc : [<c10b3478>] lr : [<c09920fc>] psr: 600001d3 sp : c1001f88 ip : 00000000 fp : 000000a0 r10: 00000000 r9 : 00000001 r8 : 8b5cf4a9 r7 : 00000001 r6 : c10b3480 r5 : c10b3fc0 r4 : c100212c r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6d2f4059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f88 to 0xc1002000) 1f80: c10fdc9d c1002134 c10b3480 c10b3f20 c1001fac c0a9e538 1fa0: c1000000 c100212c c1001fb4 c0a9e73c 00000000 c0358818 ffffffff c0f00c40 1fc0: ffffffff ffffffff 00000000 c0f00684 00000000 c0f89a20 c10ff1d4 c10020b4 1fe0: c0f89a1c c10070f4 40204059 410fc0f4 00000000 40208078 00000000 00000000 [<c09920fc>] (cpu_pm_pmu_notify) from [<c0a9e538>] (schedule+0x44/0x9c) Code: c10b3464 c10b35b0 c10b35b0 00000000 (c10b3480) ---[ end trace cb88537fdc8fa203 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [snow 01:47]: got exception: ERROR: Timeout waiting for command: cat /proc/cmdline. ~$off

[PYBOOT] [snow 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.168457] usbcore: registered new interface driver usbhid [ 2.174072] usbhid: USB HID core driver [ 2.188385] NET: Registered protocol family 10 [ 2.194427] sit: IPv6 over IPv4 tunneling driver [ 2.200256] NET: Registered protocol family 17 [ 2.204742] can: controller area network core (rev 20120528 abi 9) [ 2.211059] NET: Registered protocol family 29 [ 2.215545] can: raw protocol (rev 20120528) [ 2.219818] can: broadcast manager protocol (rev 20120528 t) [ 2.225524] can: netlink gateway (rev 20130117) max_hops=1 [ 2.231842] Key type dns_resolver registered [ 2.236450] ThumbEE CPU extension supported. [ 2.240753] Registering SWP/SWPB emulation handler [ 2.253082] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.260223] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.269744] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.276824] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.283843] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.290863] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.308044] db8500-esram12: disabling [ 2.311889] db8500-esram34: disabling [ 2.315643] en-3v3-fixed-supply: disabling [ 2.321258] V-CSI/DSI: disabling [ 2.326629] mmci-reg: disabling [ 2.330566] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.336608] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.343231] Waiting for root device /dev/mmcblk0p4... [ 2.363586] mmc3: new high speed MMC card at address 0001 [ 2.369964] mmcblk3: mmc3:0001 3.53 GiB [ 2.374389] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.380187] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.385986] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.392883] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:53]: got exception: timeout ~$off

[PYBOOT] [snowball 02:55]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling en-3v3-fixed-supply: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:59]: got exception: timeout ~$off

[PYBOOT] [snowball 02:00]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.728881] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.745544] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.756469] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.769439] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.780151] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.803833] NET: Registered protocol family 10 [ 2.809265] sit: IPv6 over IPv4 tunneling driver [ 2.814727] NET: Registered protocol family 17 [ 2.819213] NET: Registered protocol family 35 [ 2.823822] NET: Registered protocol family 37 [ 2.828338] Registering SWP/SWPB emulation handler [ 2.845123] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.857299] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-13 05:52:47 UTC (955605167) [ 2.866607] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.873748] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.880767] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.887756] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.902130] db8500-esram12: disabling [ 2.905975] db8500-esram34: disabling [ 2.909698] en-3v3-fixed-supply: disabling [ 2.914062] V-CSI/DSI: disabling [ 2.917358] mmci-reg: disabling [ 2.920684] ALSA device list: [ 2.923645] #0: MOP500-card [ 2.926971] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.932983] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.939208] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 03:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 03:07]: got exception: timeout ~$off

[PYBOOT] [snowball 03:08]: Done.