Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc3-55-gd325ea8/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.63 beaver arm-multi_v7_defconfig : FAILED 1:52.90 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:47.51 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.64 omap5uevm arm-multi_v7_defconfig : FAILED 2:08.92 omap5uevm arm-multi_lpae_defconfig : FAILED 2:18.76 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:50.09 pi arm-multi_v7_defconfig : FAILED 1:54.28 pi arm-multi_lpae_defconfig : FAILED 2:04.77 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:20.27 arndale arm-exynos_defconfig : passed 1:34.44 arndale arm-multi_v7_defconfig : passed 1:34.42 arndale arm-multi_lpae_defconfig : passed 1:35.77 bbb arm-omap2plus_defconfig : passed 1:40.13 bbb arm-multi_v7_defconfig : passed 1:17.49 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:58.01 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:50.76 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:51.19 capri arm-bcm_defconfig : passed 0:51.31 capri arm-multi_v7_defconfig : passed 1:00.84 chitra powerpc-pasemi_defconfig : passed 2:17.24 chitra powerpc-ppc64_defconfig : passed 2:00.21 colombus arm-sunxi_defconfig : passed 2:25.89 colombus arm-multi_v7_defconfig : passed 2:37.20 colombus arm-multi_lpae_defconfig : passed 2:34.09 cosmic arm-imx_v6_v7_defconfig : passed 3:20.66 cosmic arm-multi_v7_defconfig : passed 3:05.41 cubie arm-sunxi_defconfig : passed 0:52.29 cubie arm-multi_v7_defconfig : passed 0:52.17 cubie2 arm-sunxi_defconfig : passed 0:57.05 cubie2 arm-multi_v7_defconfig : passed 0:55.85 cubie2 arm-multi_lpae_defconfig : passed 0:52.95 cubox arm-multi_v7_defconfig : passed 1:08.59 cubox arm-mvebu_v7_defconfig : passed 1:14.25 dalmore arm-tegra_defconfig : warnings 1:27.46 dalmore arm-multi_v7_defconfig : warnings 1:29.26 dalmore arm-multi_lpae_defconfig : warnings 1:42.43 jetsontk1 arm-tegra_defconfig : warnings 0:52.96 jetsontk1 arm-multi_v7_defconfig : warnings 0:51.33 jetsontk1 arm-multi_lpae_defconfig : warnings 0:53.23 pandaes arm-omap2plus_defconfig : warnings 1:37.53 pandaes arm-multi_v7_defconfig : passed 1:42.69 parallella arm-multi_v7_defconfig : passed 2:51.85 pit arm-exynos_defconfig : passed 2:12.04 pit arm-multi_v7_defconfig : passed 2:20.32 pit arm-multi_lpae_defconfig : passed 2:17.16 seaboard arm-tegra_defconfig : warnings 1:04.75 seaboard arm-multi_v7_defconfig : warnings 1:00.43 seattle arm64-defconfig : passed 2:39.80 snow arm-exynos_defconfig : passed 2:13.25 snow arm-multi_v7_defconfig : passed 2:05.50 snow arm-multi_lpae_defconfig : passed 2:01.14 snowball arm-u8500_defconfig : passed 1:17.20 snowball arm-multi_v7_defconfig : passed 1:36.35 trimslice arm-tegra_defconfig : warnings 1:35.33 wandboard arm-imx_v6_v7_defconfig : passed 1:29.76 wandboard arm-multi_v7_defconfig : passed 1:12.94
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.87 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:20.39 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:20.36 hummingboard arm-multi_v7_defconfig : OFFLINE 2:13.62 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.10 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.20 sama5 arm-sama5_defconfig : OFFLINE 2:21.51 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:33.91 socfpga arm-socfpga_defconfig : OFFLINE 2:17.34 socfpga arm-multi_v7_defconfig : OFFLINE 2:21.60 trimslice arm-multi_v7_defconfig : OFFLINE 3:06.46
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.415029] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421548] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428505] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434092] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441094] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451092] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462618] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.469234] [drm] No driver support for vblank timestamp query. [ 3.475178] drm drm: No connectors reported connected with modes [ 3.481186] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.508355] Console: switching to colour frame buffer device 128x48 [ 3.520659] drm drm: fb0: frame buffer device [ 3.538674] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.549463] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.555929] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.561339] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.569183] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.583680] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.590740] hub 1-0:1.0: USB hub found [ 3.594513] hub 1-0:1.0: 1 port detected [ 3.599435] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.604847] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.612589] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.623677] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.630638] hub 2-0:1.0: USB hub found [ 3.634410] hub 2-0:1.0: 1 port detected [ 3.643024] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.656677] vdd_sata,avdd_plle: disabling [ 3.661404] usb1_vbus: disabling [ 3.665495] Waiting for root device /dev/mmcblk0p1... [ 3.948681] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.893708] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 67.903679] random: nonblocking pool is initialized
[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:50]: got exception: timeout ~$off
[PYBOOT] [beaver 01:51]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.514183] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.521227] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.526827] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.534352] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.544356] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.556938] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.563564] [drm] No driver support for vblank timestamp query. [ 6.569567] drm drm: No connectors reported connected with modes [ 6.575578] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.601275] Console: switching to colour frame buffer device 128x48 [ 6.613083] drm drm: fb0: frame buffer device [ 6.640773] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.650080] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.656558] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.661991] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.669959] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.690776] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.698378] hub 1-0:1.0: USB hub found [ 6.702159] hub 1-0:1.0: 1 port detected [ 6.706953] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.712378] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.720247] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.740774] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.748259] hub 2-0:1.0: USB hub found [ 6.752033] hub 2-0:1.0: 1 port detected [ 6.760192] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.778346] vdd_sata,avdd_plle: disabling [ 6.782770] usb1_vbus: disabling [ 6.786179] ALSA device list: [ 6.789136] #0: NVIDIA Tegra Beaver [ 6.793369] Waiting for root device /dev/mmcblk0p1... [ 7.070778] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.056146] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.791150] NET: Registered protocol family 10 [ 1.791764] sit: IPv6 over IPv4 tunneling driver [ 1.796661] NET: Registered protocol family 17 [ 1.799908] NET: Registered protocol family 15 [ 1.804378] Key type dns_resolver registered [ 1.808705] Registering SWP/SWPB emulation handler [ 1.821618] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.823914] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.831333] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.838477] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.845060] [drm] No driver support for vblank timestamp query. [ 1.850974] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.857333] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.862526] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.869736] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.878581] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.888273] mmc1: new DDR MMC card at address 0001 [ 1.892089] max98090 1-0010: MAX98090 REVID=0x43 [ 1.894379] max98090 1-0010: use default 2.8v micbias [ 1.903592] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.907173] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.913423] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.913485] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.925191] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.925784] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.938470] mmcblk1: p1 p2 [ 1.959331] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.982128] VDD10_HDMI_1.0V: disabling [ 1.982857] vdd_g3d: disabling [ 1.983925] BUCK8_2.8V: disabling [ 1.988002] ALSA device list: [ 1.989523] #0: Odroid-U3 [ 1.993435] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:45]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:46]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.947457] mmc0: new high speed MMC card at address 0001 [ 1.953452] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.958357] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.964694] smps9: Bringing 0uV into 2100000-2100000uV [ 1.970121] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.979191] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985721] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993765] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004859] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012571] smsc95xx v1.0.4 [ 2.015897] ldo9: bypassed regulator has no supply! [ 2.021024] ldo9: failed to get the current voltage(-517) [ 2.026687] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.042026] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.062840] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 46:30:8b:20:2b:50 [ 2.075358] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.081788] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112165] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130930] ldo9: bypassed regulator has no supply! [ 2.136047] ldo9: failed to get the current voltage(-517) [ 2.141715] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156233] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:11:36 UTC (946689096) [ 2.172139] pbias_mmc_omap5: disabling [ 2.176084] vmmcsdio_fixed: disabling [ 2.180660] Waiting for root device /dev/mmcblk1p2... [ 2.318514] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.454394] hub 1-2:1.0: USB hub found [ 2.458408] hub 1-2:1.0: 3 ports detected [ 2.464279] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.492277] smps9: Bringing 0uV into 2100000-2100000uV [ 2.510940] ldo9: bypassed regulator has no supply! [ 2.516067] ldo9: failed to get the current voltage(-517) [ 2.521733] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:16]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:17]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938191] mmc0: new high speed MMC card at address 0001 [ 1.948811] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953783] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960313] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.969135] smsc95xx v1.0.4 [ 1.973279] smps9: Bringing 0uV into 2100000-2100000uV [ 1.981467] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.987993] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.996013] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.007150] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.015315] ldo9: bypassed regulator has no supply! [ 2.020428] ldo9: failed to get the current voltage(-517) [ 2.023030] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, e2:d0:c7:12:d1:33 [ 2.037756] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.053080] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.079262] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.085664] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112141] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130779] ldo9: bypassed regulator has no supply! [ 2.135898] ldo9: failed to get the current voltage(-517) [ 2.141560] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156108] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:09:05 UTC (946688945) [ 2.171994] pbias_mmc_omap5: disabling [ 2.175938] vmmcsdio_fixed: disabling [ 2.180480] Waiting for root device /dev/mmcblk1p2... [ 2.248520] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.384335] hub 1-2:1.0: USB hub found [ 2.388338] hub 1-2:1.0: 3 ports detected [ 2.394217] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.422269] smps9: Bringing 0uV into 2100000-2100000uV [ 2.441009] ldo9: bypassed regulator has no supply! [ 2.446126] ldo9: failed to get the current voltage(-517) [ 2.451789] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.998683] ldo9: bypassed regulator has no supply! [ 4.003807] ldo9: failed to get the current voltage(-517) [ 4.009492] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.032320] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.040010] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.046566] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.052890] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.059762] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.069354] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.078834] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.085891] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.092034] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.098323] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.105178] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.114767] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.124255] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.131295] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.149953] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.156247] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.163108] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.172696] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.182192] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.189228] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.210581] smps9: Bringing 0uV into 2100000-2100000uV [ 4.239655] ldo9: bypassed regulator has no supply! [ 4.244763] ldo9: failed to get the current voltage(-517) [ 4.250447] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.270564] hctosys: unable to open rtc device (rtc0) [ 4.275854] sr_init: No PMIC hook to init smartreflex [ 4.281359] sr_init: platform driver register failed for SR [ 4.309006] pbias_mmc_omap5: disabling [ 4.312966] vmmcsdio_fixed: disabling [ 4.319064] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 21.253114] BUG: spinlock lockup suspected on CPU#0, kworker/u16:1/80 [ 21.258069] lock: 0xee73f000, .magic: dead4ead, .owner: kworker/u16:1/80, .owner_cpu: 0 [ 21.266136] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc3-00055-gd325ea8 #1 [ 21.275243] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.281326] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.289040] [<c010ad18>] (show_stack) from [<c0326ab8>] (dump_stack+0x78/0x8c) [ 21.296242] [<c0326ab8>] (dump_stack) from [<c015994c>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.304048] [<c015994c>] (do_raw_spin_lock) from [<c06d2360>] (__schedule+0x84/0x4b8) [ 21.311855] [<c06d2360>] (__schedule) from [<c06d27e0>] (schedule+0x4c/0xac) [ 21.318882] [<c06d27e0>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.325822] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.332331] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.340224] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.348637] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.356184] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null)) [ 21.362602] Sending NMI to all CPUs: [ 21.366157] NMI backtrace for cpu 0 [ 21.369628] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc3-00055-gd325ea8 #1 [ 21.378736] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.384816] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.392532] [<c010ad18>] (show_stack) from [<c0326ab8>] (dump_stack+0x78/0x8c) [ 21.399733] [<c0326ab8>] (dump_stack) from [<c032a418>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.407539] [<c032a418>] (nmi_cpu_backtrace) from [<c010c934>] (raise_nmi+0x60/0x64) [ 21.415260] [<c010c934>] (raise_nmi) from [<c032a398>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.424195] [<c032a398>] (nmi_trigger_all_cpu_backtrace) from [<c0159954>] (do_raw_spin_lock+0x104/0x1d8) [ 21.433738] [<c0159954>] (do_raw_spin_lock) from [<c06d2360>] (__schedule+0x84/0x4b8) [ 21.441546] [<c06d2360>] (__schedule) from [<c06d27e0>] (schedule+0x4c/0xac) [ 21.448573] [<c06d27e0>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.455512] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.462019] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.469913] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.478327] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.485874] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null))
[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:48]: got exception: timeout ~$off
[PYBOOT] [pi 01:49]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.538914] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545266] isl29018 7-0044: Failed to read 1: -6 [ 1.549851] isl29018 7-0044: regmap initialization fails: -6 [ 1.560782] NET: Registered protocol family 10 [ 1.565218] sit: IPv6 over IPv4 tunneling driver [ 1.568797] NET: Registered protocol family 17 [ 1.572801] can: controller area network core (rev 20120528 abi 9) [ 1.578992] NET: Registered protocol family 29 [ 1.583380] can: raw protocol (rev 20120528) [ 1.587628] can: broadcast manager protocol (rev 20120528 t) [ 1.593271] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598995] Key type dns_resolver registered [ 1.603321] ThumbEE CPU extension supported. [ 1.607239] Registering SWP/SWPB emulation handler [ 1.617125] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622602] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628968] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634342] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644446] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654767] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660217] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670404] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676583] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681961] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691705] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714392] Waiting for root device /dev/mmcblk0p1... [ 1.718272] mmc0: tuning execution failed: -5 [ 1.722332] mmc0: error -5 whilst initialising MMC card [ 2.583673] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597855] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603317] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609688] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615072] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:03]: got exception: timeout ~$off
[PYBOOT] [pi 02:04]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.538846] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545198] isl29018 7-0044: Failed to read 1: -6 [ 1.549782] isl29018 7-0044: regmap initialization fails: -6 [ 1.560714] NET: Registered protocol family 10 [ 1.565154] sit: IPv6 over IPv4 tunneling driver [ 1.568730] NET: Registered protocol family 17 [ 1.572733] can: controller area network core (rev 20120528 abi 9) [ 1.578924] NET: Registered protocol family 29 [ 1.583311] can: raw protocol (rev 20120528) [ 1.587560] can: broadcast manager protocol (rev 20120528 t) [ 1.593202] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598925] Key type dns_resolver registered [ 1.603249] ThumbEE CPU extension supported. [ 1.607170] Registering SWP/SWPB emulation handler [ 1.617069] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622551] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628916] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634292] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644394] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654716] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660166] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670353] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676531] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681910] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691640] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714339] Waiting for root device /dev/mmcblk0p1... [ 1.718228] mmc0: tuning execution failed: -5 [ 1.722280] mmc0: error -5 whilst initialising MMC card [ 2.583638] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597788] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603247] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609620] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615004] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:51]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done.
kernel-build-reports@lists.linaro.org