Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.8-rc5-777-gcc9e615/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 22:43.78 beaver arm-tegra_defconfig : FAILED 1:45.89 beaver arm-multi_v7_defconfig : FAILED 1:55.30 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:58.99 capri bcm_defconfig : NO BUILD chitra powerpc-ppc64_defconfig : FAILED 2:12.96 colombus arm-multi_v7_defconfig : FAILED 2:07.74 colombus arm-multi_lpae_defconfig : FAILED 2:01.28 colombus arm-multi_v7_nosmp_defconfig : FAILED 1:18.81 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:55.43 omap5uevm arm-multi_v7_defconfig : FAILED 0:48.72 omap5uevm arm-multi_lpae_defconfig : FAILED 2:11.99 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 0:58.87 pit arm-exynos_defconfig : FAILED 0:32.48 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.34 wandboard arm-imx_v6_v7_defconfig : FAILED 1:46.47 wandboard arm-multi_v7_defconfig : FAILED 1:50.85 wandboard arm-multi_v7_nosmp_defconfig : FAILED 1:46.79
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:13.30 arndale arm-exynos_defconfig : passed 1:32.44 arndale arm-multi_v7_defconfig : passed 2:09.97 arndale arm-multi_lpae_defconfig : passed 1:18.94 bbb arm-omap2plus_defconfig : passed 1:45.18 bbb arm-multi_v7_defconfig : passed 1:32.24 bbb arm-multi_v7_nosmp_defconfig : passed 1:21.99 beagleboard-x15 arm-omap2plus_defconfig : passed 0:54.62 beagleboard-x15 arm-multi_v7_defconfig : passed 0:53.13 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:46.49 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 1:06.79 capri arm-multi_v7_defconfig : passed 1:06.37 capri arm-multi_v7_nosmp_defconfig : warnings 0:54.33 chitra powerpc-pasemi_defconfig : passed 1:44.92 colombus arm-sunxi_defconfig : passed 2:31.66 cosmic arm-imx_v6_v7_defconfig : passed 3:22.26 cosmic arm-multi_v7_defconfig : passed 3:01.55 cosmic arm-multi_v7_nosmp_defconfig : passed 2:44.27 cubie arm-sunxi_defconfig : passed 0:52.62 cubie arm-multi_v7_defconfig : passed 0:53.77 cubie arm-multi_v7_nosmp_defconfig : passed 0:50.60 cubie2 arm-sunxi_defconfig : passed 0:49.40 cubie2 arm-multi_v7_defconfig : passed 0:58.48 cubie2 arm-multi_lpae_defconfig : passed 1:02.84 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:59.73 cubox arm-multi_v7_defconfig : passed 1:17.13 cubox arm-mvebu_v7_defconfig : passed 1:15.59 cubox arm-multi_v7_nosmp_defconfig : passed 1:13.95 jetsontk1 arm-tegra_defconfig : passed 0:51.01 jetsontk1 arm-multi_v7_defconfig : passed 0:53.85 jetsontk1 arm-multi_lpae_defconfig : passed 0:54.89 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:55.43 omap5uevm arm-omap2plus_defconfig : passed 1:09.50 pandaes arm-omap2plus_defconfig : warnings 1:50.13 pandaes arm-multi_v7_defconfig : passed 1:40.20 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:37.93 pi arm-exynos_defconfig : passed 2:11.40 pi arm-multi_v7_defconfig : passed 2:26.03 pi arm-multi_lpae_defconfig : passed 2:17.05 pi arm-multi_v7_nosmp_defconfig : warnings 2:13.39 pit arm-multi_v7_defconfig : passed 2:13.23 pit arm-multi_lpae_defconfig : passed 2:36.86 pit arm-multi_v7_nosmp_defconfig : warnings 2:25.68 seaboard arm-tegra_defconfig : passed 0:59.82 seaboard arm-multi_v7_defconfig : passed 1:02.16 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:09.98 seattle arm64-defconfig : warnings 2:31.07 snow arm-exynos_defconfig : passed 2:21.99 snow arm-multi_v7_defconfig : passed 2:09.21 snow arm-multi_lpae_defconfig : passed 2:30.92 snowball arm-u8500_defconfig : passed 2:26.63 snowball arm-multi_v7_defconfig : passed 1:15.35 snowball arm-multi_v7_nosmp_defconfig : warnings 1:17.52 trimslice arm-tegra_defconfig : passed 1:36.50 trimslice arm-multi_v7_defconfig : passed 2:03.39 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:46.41
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:21.07 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:30.17 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:21.35 dalmore arm-tegra_defconfig : OFFLINE 2:18.67 dalmore arm-multi_v7_defconfig : OFFLINE 2:44.22 dalmore arm-multi_lpae_defconfig : OFFLINE 2:30.64 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.45 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:30.48 hummingboard arm-multi_v7_defconfig : OFFLINE 2:27.67 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.61 parallella arm-multi_v7_defconfig : OFFLINE 2:30.43 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.97 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.29 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.21 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:53.51 sama5 arm-sama5_defconfig : OFFLINE 2:32.55 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:25.96 socfpga arm-socfpga_defconfig : OFFLINE 2:30.86 socfpga arm-multi_v7_defconfig : OFFLINE 2:28.10 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.76
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.561627] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.561951] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.567891] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.568346] NFS: Registering the id_resolver key type [ 0.568358] Key type id_resolver registered [ 0.568363] Key type id_legacy registered [ 0.568390] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.569074] bounce: pool size: 64 pages [ 0.569193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.569200] io scheduler noop registered [ 0.569204] io scheduler deadline registered [ 0.569308] io scheduler cfq registered (default) [ 0.571734] 12100000.phy supply vbus not found, using dummy regulator [ 0.571768] 12100000.phy supply vbus-boost not found, using dummy regulator [ 0.572572] libphy: mdio_driver_register: phy-bcm-ns2-pci [ 0.581488] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.581499] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.583080] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.583089] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.583554] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.583562] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.584021] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.584029] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.617267] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.618886] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 56, base_baud = 0) is a S3C6400/10 [ 0.619091] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 57, base_baud = 0) is a S3C6400/10 [ 0.619280] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 1.803186] console [ttySAC2] enabled [ 1.807021] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.816039] SuperH (H)SCI(F) driver initialized [ 1.820849] msm_serial: driver initialized [ 1.824398] STMicroelectronics ASC driver initialized [ 1.831275] [drm] Initialized drm 1.1.0 20060810 [ 1.843104] brd: module loaded [ 1.847483] loop: module loaded [ 1.850245] ahci 122f0000. [PYBOOT] [arndale 22:37]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 22:39]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.303172] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.310130] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.316650] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.323608] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.329194] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.335914] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf097e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.345913] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.357763] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.364380] [drm] No driver support for vblank timestamp query. [ 3.370318] drm drm: No connectors reported connected with modes [ 3.376325] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.402283] Console: switching to colour frame buffer device 128x48 [ 3.414414] drm drm: fb0: frame buffer device [ 3.434060] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.444899] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.451367] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.456778] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.464602] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.483768] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.490845] hub 1-0:1.0: USB hub found [ 3.494619] hub 1-0:1.0: 1 port detected [ 3.499604] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.505016] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.512750] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.533780] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.540749] hub 2-0:1.0: USB hub found [ 3.544517] hub 2-0:1.0: 1 port detected [ 3.554293] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.568075] vdd_sata,avdd_plle: disabling [ 3.572828] usb1_vbus: disabling [ 3.576877] Waiting for root device /dev/mmcblk0p1... [ 3.878769] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.876350] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:53]: got exception: timeout ~$off
[PYBOOT] [beaver 01:54]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.242764] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.249715] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.256231] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.263170] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.268752] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.275332] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.285323] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.295592] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.302207] [drm] No driver support for vblank timestamp query. [ 3.308147] drm drm: No connectors reported connected with modes [ 3.314146] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.333557] Console: switching to colour frame buffer device 128x48 [ 3.345322] drm drm: fb0: frame buffer device [ 3.349759] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.359930] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.366387] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.371790] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.379502] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.398154] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.404506] hub 1-0:1.0: USB hub found [ 3.408272] hub 1-0:1.0: 1 port detected [ 3.413017] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.418424] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.426076] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.443151] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.449436] hub 2-0:1.0: USB hub found [ 3.453201] hub 2-0:1.0: 1 port detected [ 3.460682] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.473800] vdd_sata,avdd_plle: disabling [ 3.478191] usb1_vbus: disabling [ 3.482102] Waiting for root device /dev/mmcblk0p1... [ 3.783155] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.771641] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:57]: got exception: timeout ~$off
[PYBOOT] [beaver 01:58]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 7.054311] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 7.061371] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.066971] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.074471] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.084470] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.097113] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.103752] [drm] No driver support for vblank timestamp query. [ 7.109756] drm drm: No connectors reported connected with modes [ 7.115768] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.141556] Console: switching to colour frame buffer device 128x48 [ 7.153355] drm drm: fb0: frame buffer device [ 7.190877] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.200020] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.206521] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.211953] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.219911] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.250883] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.258492] hub 1-0:1.0: USB hub found [ 7.262293] hub 1-0:1.0: 1 port detected [ 7.267081] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.272511] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.280390] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.310874] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.318355] hub 2-0:1.0: USB hub found [ 7.322141] hub 2-0:1.0: 1 port detected [ 7.330307] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.348415] vdd_sata,avdd_plle: disabling [ 7.352915] usb1_vbus: disabling [ 7.356308] ALSA device list: [ 7.359265] #0: NVIDIA Tegra Beaver [ 7.363448] Waiting for root device /dev/mmcblk0p1... [ 7.680882] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.766267] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:44]: got exception: timeout ~$off
[PYBOOT] [beaver 01:45]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
PID hash table entries: 4096 (order: 3, 32768 bytes) Sorting __ex_table... Memory: 4023680K/4194304K available (10012K kernel code, 1748K rwdata, 3432K rodata, 4204K init, 1027K bss, 170624K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 12992 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver cpuidle: using governor menu kworker/u4:0 (39) used greatest stack d [PYBOOT] [chitra 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 02:11]: got exception: timeout ~$off
[PYBOOT] [chitra 02:12]: Done. Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.458381] [<c030bdac>] (die) from [<c031ce10>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.466901] [<c031ce10>] (__do_kernel_fault.part.0) from [<c0317e40>] (do_page_fault+0x36c/0x380) [ 2.476334] [<c0317e40>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.484521] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 2.492229] Exception stack(0xee667cd8 to 0xee667d20) [ 2.497627] 7cc0: 00000000 00000000 [ 2.506294] 7ce0: 00000000 ee0182cc ee018298 c133eb90 00000001 00000000 ee01a008 ffffffff [ 2.514967] 7d00: 00000000 0010c8e0 ee018288 ee667d28 c03a2b30 c03a2ad4 20000013 ffffffff [ 2.523735] [<c030c478>] (__dabt_svc) from [<c03a2ad4>] (clocksource_unbind+0x2c/0x5c) [ 2.532282] [<c03a2ad4>] (clocksource_unbind) from [<c03a2b30>] (clocksource_unregister+0x2c/0x44) [ 2.541900] [<c03a2b30>] (clocksource_unregister) from [<c0a26a90>] (sun5i_rate_cb_clksrc+0x34/0x3c) [ 2.551653] [<c0a26a90>] (sun5i_rate_cb_clksrc) from [<c035dca8>] (notifier_call_chain+0x44/0x84) [ 2.561119] [<c035dca8>] (notifier_call_chain) from [<c035e018>] (__srcu_notifier_call_chain+0x44/0x60) [ 2.571107] [<c035e018>] (__srcu_notifier_call_chain) from [<c035e04c>] (srcu_notifier_call_chain+0x18/0x20) [ 2.581546] [<c035e04c>] (srcu_notifier_call_chain) from [<c0a48dcc>] (__clk_notify+0x70/0x7c) [ 2.590776] [<c0a48dcc>] (__clk_notify) from [<c0a48f18>] (clk_propagate_rate_change+0xa4/0xc4) [ 2.600092] [<c0a48f18>] (clk_propagate_rate_change) from [<c0a48ee0>] (clk_propagate_rate_change+0x6c/0xc4) [ 2.610411] Code: ebff872d e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.616851] ---[ end trace 4f547ae874a08f47 ]--- [ 2.621732] Fixing recursive fault but reboot is needed! [ 22.979715] INFO: rcu_sched detected stalls on CPUs/tasks: [ 22.985933] 1-...: (1 GPs behind) idle=cf1/140000000000000/0 softirq=32/32 fqs=5 [ 22.993761] (detected by 3, t=4204 jiffies, g=-276, c=-277, q=12) [ 23.000459] Task dump for CPU 1: [ 23.003966] kworker/1:1 D c0baca38 0 90 0 0x00000002 [ 23.011404] [<c0baca38>] (__schedule) from [<c1202100>] (0xc1202100) [ 23.018259] rcu_sched kthread starved for 4194 jiffies! g4294967020 c4294967019 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 [ 23.028965] rcu_sched S c0baca38 0 7 2 0x00000000 [ 23.036196] [<c0baca38>] (__schedule) from [<c0bace24>] (schedule+0x44/0x9c) [ 23.043815] [<c0bace24>] (schedule) from [<c0bafb7c>] (schedule_timeout+0x150/0x234) [ 23.052166] [<c0bafb7c>] (schedule_timeout) from [<c0394a20>] (rcu_gp_kthread+0x518/0x8dc) [ 23.060997] [<c0394a20>] (rcu_gp_kthread) from [<c035d1c0>] (kthread+0xdc/0xf4) [ 23.068869] [<c035d1c0>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c)
[PYBOOT] [colombus 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:59]: got exception: timeout ~$off
[PYBOOT] [colombus 02:00]: Done. Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.349595] 3f00: eefbb700 00000000 eefbeb00 c035776c c03583a4 eefbb718 eefbb700 ee0f7b98 [ 2.358272] 3f20: 00000008 c1202100 eefbb718 ee672000 eefbb700 c03583dc ee0fa300 ee0f7b80 [ 2.366943] 3f40: c03583a4 00000000 ee0fa300 ee0f7b80 c03583a4 00000000 00000000 00000000 [ 2.375603] 3f60: 00000000 c035d1c0 00000000 00000000 ffffffff ee0f7b80 00000000 00000000 [ 2.384284] 3f80: ee673f80 ee673f80 00000001 00010001 ee673f90 ee673f90 ee0fa300 ee0fa300 [ 2.392939] 3fa0: c035d0e4 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.401575] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.410239] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 2.419006] [<c035d5e8>] (kthread_data) from [<c03589c0>] (wq_worker_sleeping+0x8/0xd0) [ 2.427609] [<c03589c0>] (wq_worker_sleeping) from [<c0bacbd0>] (__schedule+0x374/0x584) [ 2.436235] [<c0bacbd0>] (__schedule) from [<c0bace24>] (schedule+0x44/0x9c) [ 2.443866] [<c0bace24>] (schedule) from [<c03446e0>] (do_exit+0x6d8/0xa78) [ 2.451398] [<c03446e0>] (do_exit) from [<c030bdac>] (die+0x410/0x474) [ 2.458488] [<c030bdac>] (die) from [<c031ce10>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.467003] [<c031ce10>] (__do_kernel_fault.part.0) from [<c0317e40>] (do_page_fault+0x36c/0x380) [ 2.476438] [<c0317e40>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.484623] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 2.492327] Exception stack(0xee673cd8 to 0xee673d20) [ 2.497728] 3cc0: 00000000 00000000 [ 2.506400] 3ce0: 00000000 ee0182cc ee018298 c133eb90 00000001 00000000 ee01a008 ffffffff [ 2.515073] 3d00: 00000000 0010c8e0 ee018288 ee673d28 c03a2b30 c03a2ad4 20000013 ffffffff [ 2.523850] [<c030c478>] (__dabt_svc) from [<c03a2ad4>] (clocksource_unbind+0x2c/0x5c) [ 2.532398] [<c03a2ad4>] (clocksource_unbind) from [<c03a2b30>] (clocksource_unregister+0x2c/0x44) [ 2.542014] [<c03a2b30>] (clocksource_unregister) from [<c0a26a90>] (sun5i_rate_cb_clksrc+0x34/0x3c) [ 2.551770] [<c0a26a90>] (sun5i_rate_cb_clksrc) from [<c035dca8>] (notifier_call_chain+0x44/0x84) [ 2.561230] [<c035dca8>] (notifier_call_chain) from [<c035e018>] (__srcu_notifier_call_chain+0x44/0x60) [ 2.571220] [<c035e018>] (__srcu_notifier_call_chain) from [<c035e04c>] (srcu_notifier_call_chain+0x18/0x20) [ 2.581652] [<c035e04c>] (srcu_notifier_call_chain) from [<c0a48dcc>] (__clk_notify+0x70/0x7c) [ 2.590878] [<c0a48dcc>] (__clk_notify) from [<c0a48f18>] (clk_propagate_rate_change+0xa4/0xc4) [ 2.600195] [<c0a48f18>] (clk_propagate_rate_change) from [<c0a48ee0>] (clk_propagate_rate_change+0x6c/0xc4) [ 2.610516] Code: ebff872d e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.616957] ---[ end trace bb7cc70c72492e99 ]--- [ 2.621836] Fixing recursive fault but reboot is needed!
[PYBOOT] [colombus 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 02:06]: got exception: timeout ~$off
[PYBOOT] [colombus 02:07]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 33.968922] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 33.978399] [<c030b7b0>] (die) from [<c031a728>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 33.989006] [<c031a728>] (__do_kernel_fault.part.0) from [<c0315990>] (do_page_fault+0x36c/0x380) [ 34.000436] [<c0315990>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.010555] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.019424] Exception stack(0xee0728e8 to 0xee072930) [ 34.026710] 28e0: ee060cc0 00000001 ffffffff 00000000 ee060cc0 00000000 [ 34.037522] 2900: c1132e20 00000000 ee060eec c0b4a3e8 c034fada ee072984 ee0608b8 ee072938 [ 34.047665] 2920: c034b360 c034fad8 20000193 ffffffff [ 34.055364] [<c030be78>] (__dabt_svc) from [<c034fad8>] (kthread_data+0x4/0xc) [ 34.065304] [<c034fad8>] (kthread_data) from [<c034b360>] (wq_worker_sleeping+0x8/0xb8) [ 34.075841] [<c034b360>] (wq_worker_sleeping) from [<c0b4a250>] (__schedule+0x310/0x464) [ 34.086380] [<c0b4a250>] (__schedule) from [<c0b4a3e8>] (schedule+0x44/0x9c) [ 34.096084] [<c0b4a3e8>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 34.106011] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 34.115486] [<c030b7b0>] (die) from [<c031a728>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 34.126093] [<c031a728>] (__do_kernel_fault.part.0) from [<c0315990>] (do_page_fault+0x36c/0x380) [ 34.137518] [<c0315990>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.147651] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.156528] Exception stack(0xee072b20 to 0xee072b68) [ 34.164064] 2b20: ee060cc0 00000001 ffffffff 00000000 ee060cc0 00000000 c1132e20 00000000 [ 34.174903] 2b40: ee060eec c0b4a3e8 c034fada ee072bbc ee0608b8 ee072b70 c034b360 c034fad8 [ 34.184707] 2b60: 20000193 ffffffff [ 34.190829] [<c030be78>] (__dabt_svc) from [<c034fad8>] (kthread_data+0x4/0xc) [ 34.200766] [<c034fad8>] (kthread_data) from [<c034b360>] (wq_worker_sleeping+0x8/0xb8) [ 34.211312] [<c034b360>] (wq_worker_sleeping) from [<c0b4a250>] (__schedule+0x310/0x464) [ 34.221842] [<c0b4a250>] (__schedule) from [<c0b4a3e8>] (schedule+0x44/0x9c) [ 34.231545] [<c0b4a3e8>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 34.241482] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 34.250957] [<c030b7b0>] (die) from [<c031a728>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 34.261563] [<c031a728>] (__do_kernel_fault.part.0) from [<c0315990>] (do_page_fault+0x36c/0x380) [ 34.273024] [<c0315990>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.283145] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.292019] Exception stack(0xee072d58 to 0xee072da0) [ 34.298717] 2d40: ee060cc0 00000001
[PYBOOT] [colombus 01:17]: got exception: panic ~$off
[PYBOOT] [colombus 01:18]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.243587] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 2.250557] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.259102] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 2.259388] mmc1: new DDR MMC card at address 0001 [ 2.259877] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 2.260090] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.260293] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.260506] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.261637] mmcblk1: p1 p2 [ 2.294315] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0 [ 2.299794] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.306991] exynos-bus: new bus device registered: bus_dmc (100000 KHz ~ 400000 KHz) [ 2.314169] exynos-bus: new bus device registered: bus_acp (100000 KHz ~ 267000 KHz) [ 2.321630] exynos-bus: new bus device registered: bus_c2c (100000 KHz ~ 400000 KHz) [ 2.329879] exynos-bus: new bus device registered: bus_leftbus (100000 KHz ~ 200000 KHz) [ 2.337406] exynos-bus: new bus device registered: bus_rightbus (100000 KHz ~ 200000 KHz) [ 2.345669] exynos-bus: new bus device registered: bus_display (160000 KHz ~ 200000 KHz) [ 2.353753] exynos-bus: new bus device registered: bus_fsys (100000 KHz ~ 134000 KHz) [ 2.361555] exynos-bus: new bus device registered: bus_peri ( 50000 KHz ~ 100000 KHz) [ 2.369580] exynos-bus: new bus device registered: bus_mfc (100000 KHz ~ 200000 KHz) [ 2.377016] devfreq bus_dmc: Couldn't update frequency transition information. [ 2.385089] devfreq bus_leftbus: Couldn't update frequency transition information. [ 2.412834] max98090 1-0010: MAX98090 REVID=0x43 [ 2.417351] max98090 1-0010: use default 2.8v micbias [ 2.429127] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.434363] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.467715] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.491452] VDD10_HDMI_1.0V: disabling [ 2.493251] vdd_g3d: disabling [ 2.494493] BUCK8_P3V3: disabling [ 2.498214] ALSA device list: [ 2.498861] #0: Odroid-U3 [ 2.503735] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:53]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:54]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.856413] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.867265] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.882637] SMPS6: supplied by vsys_cobra [ 1.887157] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.894826] SMPS7: supplied by vsys_cobra [ 1.899204] random: fast init done [ 1.903300] vdds_1v8_main: supplied by smps7 [ 1.908687] SMPS8: supplied by vsys_cobra [ 1.913617] mmc0: new high speed MMC card at address 0001 [ 1.919660] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.924561] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.930916] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.937307] SMPS9: supplied by vsys_cobra [ 1.941858] smps9: Bringing 0uV into 2100000-2100000uV [ 1.949841] LDO1: supplied by vsys_cobra [ 1.954273] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.960611] LDO2: supplied by vsys_cobra [ 1.965036] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.971393] LDO3: supplied by vdds_1v8_main [ 1.977385] LDO4: supplied by vdds_1v8_main [ 1.982069] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.988440] LDO5: supplied by vsys_cobra [ 1.994194] LDO6: supplied by vdds_1v8_main [ 2.001699] LDO7: supplied by vsys_cobra [ 2.006123] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012485] LDO8: supplied by vsys_cobra [ 2.018227] LDO9: supplied by vmmcsd_fixed [ 2.024285] LDOLN: supplied by vsys_cobra [ 2.030085] LDOUSB: supplied by vsys_cobra [ 2.038380] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.059635] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.067435] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.075322] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.000000] HighMem zone: 323072 pages, LIFO batch:31 [ 0.000000] OMAP5432 ES2.0 [ 0.000000] percpu: Embedded 14 pages/cpu @eefc4000 s25932 r8192 d23220 u57344 [ 0.000000] pcpu-alloc: s25932 r8192 d23220 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518144 [ 0.000000] Kernel command line: console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978892K/2078720K available (9216K kernel code, 1110K rwdata, 3828K rodata, 2048K init, 340K bss, 34292K reserved, 65536K cma-reserved, 1226752K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c00000 (10208 kB) [ 0.000000] .init : 0xc1000000 - 0xc1200000 (2048 kB) [ 0.000000] .data : 0xc1200000 - 0xc1315ba0 (1111 kB) [ 0.000000] .bss : 0xc1317000 - 0xc136c138 ( 341 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16ac02862, max_idle_ns: 440795202218 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511085ns [ 0.000013] Switching to timer-based delay loop, resolution 162ns [ 0.001947] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.001953] OMAP clocksource: 32k_counter at 32768 Hz
[PYBOOT] [omap5uevm 00:47]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:48]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.119558] Control: 10c53c7d Table: 80204059 DAC: 00000051 [ 2.125565] Process swapper (pid: 1, stack limit = 0xee06c218) [ 2.131666] Stack: (0xee06de50 to 0xee06e000) [ 2.136224] de40: ed84c770 ee057800 ee057800 c0c1759c [ 2.144783] de60: ee01e7a0 c03fea04 ed84c770 00008124 ee057800 c03fea58 ed84c770 c05168e8 [ 2.153343] de80: c0c16524 00008124 ed84c770 00008124 c0c16524 c0516c30 00000000 00000000 [ 2.161910] dea0: c0c16524 ee01e780 c0d8d738 c1093834 00000000 c0516d64 c0c1759c c0c16524 [ 2.170471] dec0: c0c164a8 c0518158 c0c16524 c0c16524 c0c164a8 ee01e780 ee01e780 c09f0000 [ 2.179029] dee0: c12592a0 ee01e780 c0d8d738 c1049454 c0d8d738 c0441a00 c1049350 ffffe000 [ 2.187597] df00: 00000119 c0301d34 c11356f8 00000000 00000000 c0437194 c0c09f00 ee043700 [ 2.196163] df20: c0fb0fb8 c0c1bff0 00000119 c034ef1c c0e53a60 c0faf9c4 00000000 00000007 [ 2.204725] df40: 00000007 c0e67238 00000000 c1218000 c1218000 00000119 c1218000 c1218000 [ 2.213279] df60: 00000119 c1093834 c1093838 c1000d8c 00000007 00000007 00000000 c10005ac [ 2.221838] df80: 00000000 00000000 c0b48bf4 00000000 00000000 00000000 00000000 00000000 [ 2.230404] dfa0: 00000000 c0b48bfc 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 2.238968] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.247527] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 e8185849 12bf218a [ 2.256095] [<c03df4ec>] (kmem_cache_alloc) from [<c03fea04>] (alloc_inode+0x5c/0xa4) [ 2.264303] [<c03fea04>] (alloc_inode) from [<c03fea58>] (new_inode+0xc/0x48) [ 2.271770] [<c03fea58>] (new_inode) from [<c05168e8>] (debugfs_get_inode+0x10/0x54) [ 2.279877] [<c05168e8>] (debugfs_get_inode) from [<c0516c30>] (__debugfs_create_file+0x48/0xcc) [ 2.289081] [<c0516c30>] (__debugfs_create_file) from [<c0516d64>] (debugfs_create_file_unsafe+0x30/0x38) [ 2.299109] [<c0516d64>] (debugfs_create_file_unsafe) from [<c0518158>] (debugfs_create_u32+0x28/0x30) [ 2.308859] [<c0518158>] (debugfs_create_u32) from [<c09f0000>] (clk_debug_create_one+0x3c/0x15c) [ 2.318152] [<c09f0000>] (clk_debug_create_one) from [<c1049454>] (clk_debug_init+0x104/0x138) [ 2.327161] [<c1049454>] (clk_debug_init) from [<c0301d34>] (do_one_initcall+0x44/0x16c) [ 2.335640] [<c0301d34>] (do_one_initcall) from [<c1000d8c>] (kernel_init_freeable+0x134/0x1c4) [ 2.344758] [<c1000d8c>] (kernel_init_freeable) from [<c0b48bfc>] (kernel_init+0x8/0x110) [ 2.353329] [<c0b48bfc>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 2.361255] Code: e5930000 e3500000 0a000016 e5943014 (e7905003) [ 2.367652] ---[ end trace 8ce7a5b5127d9db0 ]--- [ 2.372498] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.372498] [ 2.382067] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.382067]
[PYBOOT] [omap5uevm 00:57]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:58]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 5.363864] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 5.386059] vdd_1v2_2: disabling [ 5.387970] TPS65090_RAILSDCDC3: disabling [ 5.391919] TPS65090_RAILSLDO1: disabling [ 5.396123] TPS65090_RAILSLDO2: disabling [ 5.400415] ALSA device list: [ 5.402815] #0: Peach-Pit-I2S-MAX98090 [ 5.408197] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 5.415817] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem [ 5.422189] EXT4-fs (mmcblk0p1): write access will be enabled during recovery [ 5.452846] EXT4-fs (mmcblk0p1): recovery complete [ 5.457428] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.464270] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 5.473191] devtmpfs: mounted [ 5.475284] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [ 5.484444] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 5.490007] pgd = ed48c000 [ 5.492697] [00000000] *pgd=fa00c835 [ 5.510189] Kernel panic - no [PYBOOT] [pit 00:29]: kernel: finished booting, starting userspace. t syncing: Attempted to kill init! exitcode=0x00000007 [ 5.510189] [ 5.517840] CPU: 0 PID: 1 Comm: init Not tainted 4.8.0-rc5-00777-gcc9e615 #1 [ 5.524864] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 5.530956] [<c010e0ec>] (unwind_backtrace) from [<c010ad50>] (show_stack+0x10/0x14) [ 5.538664] [<c010ad50>] (show_stack) from [<c032d4a0>] (dump_stack+0x78/0x8c) [ 5.545867] [<c032d4a0>] (dump_stack) from [<c0199784>] (panic+0xdc/0x250) [ 5.552717] [<c0199784>] (panic) from [<c011d778>] (do_exit+0xa50/0xa74) [ 5.559394] [<c011d778>] (do_exit) from [<c011e404>] (do_group_exit+0x3c/0xbc) [ 5.566595] [<c011e404>] (do_group_exit) from [<c01279c8>] (get_signal+0x220/0x5a4) [ 5.574228] [<c01279c8>] (get_signal) from [<c010a498>] (do_signal+0xc4/0x418) [ 5.581429] [<c010a498>] (do_signal) from [<c010a990>] (do_work_pending+0x94/0xa4) [ 5.588976] [<c010a990>] (do_work_pending) from [<c0107714>] (slow_work_pending+0xc/0x20) [ 5.597144] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 5.597144]
[PYBOOT] [pit 00:30]: got exception: panic ~$off
[PYBOOT] [pit 00:32]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.011659] can: broadcast manager protocol (rev 20160617 t) [ 2.017304] can: netlink gateway (rev 20130117) max_hops=1 [ 2.022981] Key type dns_resolver registered [ 2.027368] ThumbEE CPU extension supported. [ 2.035119] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 2.040602] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 2.046962] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 2.052339] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo [ 2.061873] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 2.081818] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 2.090098] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 2.100343] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 2.109723] mmc0: new DDR MMC card at address 0001 [ 2.114289] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.118659] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 2.125439] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.130487] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.137786] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.145971] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 2.153466] mmcblk0: p2 p3 [ 2.173373] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.181948] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 2.193349] vbat-supply: disabling [ 2.197014] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.203899] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.213357] mmc2: new high speed SDIO card at address 0001 [ 2.218946] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.225566] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.233187] devtmpfs: mounted [ 2.235742] Freeing unused kernel memory: 1024K (c1000000 - c110000 [PYBOOT] [snow 00:41]: kernel: finished booting, starting userspace. 0) INIT: version 2.88 booting
[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:12]: got exception: timeout ~$off
[PYBOOT] [snow 03:13]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 2.981173] can: controller area network core (rev 20120528 abi 9) [ 2.987558] NET: Registered protocol family 29 [ 2.992019] can: raw protocol (rev 20120528) [ 2.996395] can: broadcast manager protocol (rev 20160617 t) [ 3.002089] can: netlink gateway (rev 20130117) max_hops=1 [ 3.008254] Key type dns_resolver registered [ 3.018957] Registering SWP/SWPB emulation handler [ 3.041901] 2188000.ethernet supply phy not found, using dummy regulator [ 3.048999] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 3.058288] pps pps0: new PPS source ptp0 [ 3.070973] libphy: fec_enet_mii_bus: probed [ 3.077382] fec 2188000.ethernet eth0: registered PHC device 1 [ 3.085971] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 3.099286] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 3.108495] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.174544] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.182830] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 3.192108] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.264369] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.274417] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.317547] ALSA device list: [ 3.320546] #0: imx6-wandboard-sgtl5000 [ 3.324589] #1: imx-spdif [ 3.329016] Waiting for root device /dev/mmcblk0p2... [ 3.331903] mmc2: host does not support reading read-only switch, assuming write-enable [ 3.337791] mmc2: new high speed SDHC card at address 0001 [ 3.340436] mmcblk2: mmc2:0001 00000 7.61 GiB [ 3.343381] mmcblk2: p1 p2 [ 3.345821] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.351644] mmc1: new high speed SDHC card at address aaaa [ 3.352644] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 3.354954] mmcblk1: p1 p2 [ 79.364491] random: crng init done
[PYBOOT] [wandboard 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:44]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:45]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.619948] NET: Registered protocol family 10 [ 1.625224] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.631806] NET: Registered protocol family 17 [ 1.636288] can: controller area network core (rev 20120528 abi 9) [ 1.642544] NET: Registered protocol family 29 [ 1.647011] can: raw protocol (rev 20120528) [ 1.651300] can: broadcast manager protocol (rev 20160617 t) [ 1.656985] can: netlink gateway (rev 20130117) max_hops=1 [ 1.662860] Key type dns_resolver registered [ 1.669094] ThumbEE CPU extension supported. [ 1.673380] Registering SWP/SWPB emulation handler [ 1.705176] 2188000.ethernet supply phy not found, using dummy regulator [ 1.713904] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 1.722199] pps pps0: new PPS source ptp0 [ 1.730378] libphy: fec_enet_mii_bus: probed [ 1.735238] fec 2188000.ethernet eth0: registered PHC device 1 [ 1.742418] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.751600] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 1.808688] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.817139] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.826319] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 1.878696] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.888370] hctosys: unable to open rtc device (rtc0) [ 1.900545] Waiting for root device /dev/mmcblk0p2... [ 1.946358] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.961910] mmc2: new high speed SDHC card at address 0001 [ 1.967902] mmcblk2: mmc2:0001 00000 7.61 GiB [ 1.973252] mmcblk2: p1 p2 [ 1.987859] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.003855] mmc1: new high speed SDHC card at address aaaa [ 2.009697] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 2.015285] mmcblk1: p1 p2 [ 3.303222] random: fast init done
[PYBOOT] [wandboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:49]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:50]: Done. Board wandboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.530596] usbhid: USB HID core driver [ 1.539546] NET: Registered protocol family 10 [ 1.546723] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.553224] NET: Registered protocol family 17 [ 1.557696] can: controller area network core (rev 20120528 abi 9) [ 1.563938] NET: Registered protocol family 29 [ 1.568397] can: raw protocol (rev 20120528) [ 1.572679] can: broadcast manager protocol (rev 20160617 t) [ 1.578353] can: netlink gateway (rev 20130117) max_hops=1 [ 1.584174] Key type dns_resolver registered [ 1.589736] ThumbEE CPU extension supported. [ 1.620184] 2188000.ethernet supply phy not found, using dummy regulator [ 1.628857] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 1.638287] pps pps0: new PPS source ptp0 [ 1.649732] libphy: fec_enet_mii_bus: probed [ 1.654485] fec 2188000.ethernet eth0: registered PHC device 1 [ 1.661530] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.670701] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 1.721793] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.730106] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.739272] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 1.795089] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.804653] hctosys: unable to open rtc device (rtc0) [ 1.814740] Waiting for root device /dev/mmcblk0p2... [ 1.884323] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.898006] mmc2: new high speed SDHC card at address 0001 [ 1.903873] mmcblk2: mmc2:0001 00000 7.61 GiB [ 1.909151] mmcblk2: p1 p2 [ 1.918264] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.932337] mmc1: new high speed SDHC card at address aaaa [ 1.940010] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 1.952101] mmcblk1: p1 p2 [ 2.915041] random: fast init done
[PYBOOT] [wandboard 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:45]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:46]: Done.
kernel-build-reports@lists.linaro.org