Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160415/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:26.93 bbb arm-omap2plus_defconfig : FAILED 1:53.77 bbb arm-multi_v7_defconfig : FAILED 2:00.48 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:08.27 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.10 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.26 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.08 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:08.26 beaver arm-tegra_defconfig : FAILED 1:45.59 beaver arm-multi_v7_defconfig : FAILED 1:52.32 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:52.15 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.72 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.70 cosmic arm-multi_v7_defconfig : FAILED 2:08.62 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:18.24 dalmore arm-tegra_defconfig : FAILED 1:51.39 dalmore arm-multi_v7_defconfig : FAILED 2:06.92 dalmore arm-multi_lpae_defconfig : FAILED 2:12.39 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:55.83 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.63 pi arm-multi_v7_defconfig : FAILED 2:05.25 pi arm-multi_lpae_defconfig : FAILED 2:03.63 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.06 snowball arm-u8500_defconfig : FAILED 1:57.36 snowball arm-multi_v7_defconfig : FAILED 2:08.24 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:01.28
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.43 arndale arm-exynos_defconfig : passed 1:33.84 arndale arm-multi_v7_defconfig : warnings 1:33.95 arndale arm-multi_lpae_defconfig : warnings 1:24.49 capri arm-bcm_defconfig : passed 0:53.00 capri arm-multi_v7_defconfig : warnings 0:53.83 capri arm-multi_v7_nosmp_defconfig : warnings 1:01.94 chitra powerpc-pasemi_defconfig : passed 1:54.99 chitra powerpc-ppc64_defconfig : passed 1:59.26 colibri-vf61 arm-imx_v6_v7_defconfig : warnings 1:19.13 colibri-vf61 arm-multi_v7_defconfig : warnings 1:19.47 colibri-vf61 arm-multi_v7_nosmp_defconfig : warnings 1:16.76 colombus arm-sunxi_defconfig : passed 2:41.79 colombus arm-multi_v7_defconfig : warnings 2:53.56 colombus arm-multi_lpae_defconfig : warnings 2:32.82 cubie arm-sunxi_defconfig : passed 0:55.96 cubie arm-multi_v7_defconfig : warnings 0:53.77 cubie arm-multi_v7_nosmp_defconfig : warnings 0:58.20 cubie2 arm-sunxi_defconfig : passed 0:53.22 cubie2 arm-multi_v7_defconfig : warnings 0:59.83 cubie2 arm-multi_lpae_defconfig : warnings 0:59.50 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:57.59 cubox arm-multi_v7_defconfig : warnings 1:20.97 cubox arm-mvebu_v7_defconfig : passed 1:04.15 cubox arm-multi_v7_nosmp_defconfig : warnings 1:19.77 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.66 hummingboard arm-multi_v7_defconfig : warnings 1:43.59 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:12.82 jetsontk1 arm-tegra_defconfig : warnings 1:35.47 jetsontk1 arm-multi_v7_defconfig : warnings 1:33.87 jetsontk1 arm-multi_lpae_defconfig : warnings 1:57.17 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.47 pandaes arm-omap2plus_defconfig : warnings 1:45.02 pandaes arm-multi_v7_defconfig : passed 1:51.55 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:55.28 pi arm-exynos_defconfig : passed 2:11.21 pi arm-multi_v7_nosmp_defconfig : warnings 2:19.36 pit arm-exynos_defconfig : passed 2:09.04 pit arm-multi_v7_defconfig : warnings 2:17.97 pit arm-multi_lpae_defconfig : warnings 2:29.03 pit arm-multi_v7_nosmp_defconfig : warnings 2:12.85 seattle arm64-defconfig : warnings 2:21.51 snow arm-exynos_defconfig : passed 2:07.17 snow arm-multi_v7_defconfig : warnings 2:13.74 snow arm-multi_lpae_defconfig : warnings 1:59.93 socfpga arm-socfpga_defconfig : warnings 1:30.43 socfpga arm-multi_v7_defconfig : warnings 1:18.89 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:21.76 trimslice arm-tegra_defconfig : warnings 1:33.49 trimslice arm-multi_v7_defconfig : warnings 3:31.75 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:34.45 wandboard arm-imx_v6_v7_defconfig : passed 1:17.01 wandboard arm-multi_v7_defconfig : warnings 1:15.56 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:09.94
Offline boards:
omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.34 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:18.28 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:20.27 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:24.44 parallella arm-multi_v7_defconfig : OFFLINE 2:21.62 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.21 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.04 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:59.24 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:48.55 sama5 arm-sama5_defconfig : OFFLINE 2:16.96 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:35.76 seaboard arm-tegra_defconfig : OFFLINE 2:21.59 seaboard arm-multi_v7_defconfig : OFFLINE 2:35.02 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.19
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.173029] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc3-next-20160415 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Thu Apr 14 22:17:24 PDT 2016 [ 2.194325] [c1039560] *pgd=4100041e(bad) [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 2.211511] Modules linked in: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fa800, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc3-next-20160415 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b468>] (show_stack+0x10/0x14) [ 0.000000] [<c030b468>] (show_stack) from [<c0335f48>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335f48>] (__warn) from [<c0335f98>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335f98>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x974) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode.
[PYBOOT] [arndale 02:24]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:25]: got exception: timeout ~$off
[PYBOOT] [arndale 02:26]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.639347] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.649258] ledtrig-cpu: registered to indicate activity on CPUs [ 1.656490] usbcore: registered new interface driver usbhid [ 1.662416] usbhid: USB HID core driver [ 1.674122] NET: Registered protocol family 10 [ 1.680646] sit: IPv6 over IPv4 tunneling driver [ 1.686766] NET: Registered protocol family 17 [ 1.691514] can: controller area network core (rev 20120528 abi 9) [ 1.698161] NET: Registered protocol family 29 [ 1.702870] can: raw protocol (rev 20120528) [ 1.707388] can: broadcast manager protocol (rev 20120528 t) [ 1.713381] can: netlink gateway (rev 20130117) max_hops=1 [ 1.720076] Key type dns_resolver registered [ 1.724939] omap_voltage_late_init: Voltage driver support not added [ 1.733265] ThumbEE CPU extension supported. [ 1.737872] Registering SWP/SWPB emulation handler [ 1.781657] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.788205] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.795921] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.804674] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812582] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820444] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.828246] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.835583] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.844328] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.852243] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.861931] mmc1: new high speed MMC card at address 0001 [ 1.869162] hctosys: unable to open rtc device (rtc0) [ 1.882195] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.888213] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.895359] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.904213] mmcblk1: p1 p2 [ 1.909970] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:58]: got exception: timeout ~$off
[PYBOOT] [bbb 01:59]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.312536] sdhci: Secure Digital Host Controller Interface driver [ 1.319074] sdhci: Copyright(c) Pierre Ossman [ 1.324842] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.388978] Synopsys Designware Multimedia Card Interface Driver [ 1.396281] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.405291] ledtrig-cpu: registered to indicate activity on CPUs [ 1.412142] usbcore: registered new interface driver usbhid [ 1.418026] usbhid: USB HID core driver [ 1.427188] NET: Registered protocol family 10 [ 1.433587] sit: IPv6 over IPv4 tunneling driver [ 1.439399] NET: Registered protocol family 17 [ 1.444127] can: controller area network core (rev 20120528 abi 9) [ 1.450720] NET: Registered protocol family 29 [ 1.455400] can: raw protocol (rev 20120528) [ 1.459901] can: broadcast manager protocol (rev 20120528 t) [ 1.465868] can: netlink gateway (rev 20130117) max_hops=1 [ 1.472324] Key type dns_resolver registered [ 1.477157] omap_voltage_late_init: Voltage driver support not added [ 1.484937] ThumbEE CPU extension supported. [ 1.497277] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.504910] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.512922] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.520685] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.528410] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536088] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.543376] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.550979] hctosys: unable to open rtc device (rtc0) [ 1.561581] Waiting for root device /dev/mmcblk0p2... [ 1.598276] mmc1: new high speed MMC card at address 0001 [ 1.604735] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.609800] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.616285] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.624721] mmcblk1: p1 p2
[PYBOOT] [bbb 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:06]: got exception: timeout ~$off
[PYBOOT] [bbb 02:07]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.093350] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.099471] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.105797] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.112672] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.122266] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.131763] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.138780] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.180689] ledtrig-cpu: registered to indicate activity on CPUs [ 2.189433] oprofile: using arm/armv7 [ 2.194431] Initializing XFRM netlink socket [ 2.199581] NET: Registered protocol family 10 [ 2.210649] sit: IPv6 over IPv4 tunneling driver [ 2.219640] NET: Registered protocol family 17 [ 2.224579] NET: Registered protocol family 15 [ 2.229844] Key type dns_resolver registered [ 2.234750] omap_voltage_late_init: Voltage driver support not added [ 2.241492] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.250031] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.260504] ThumbEE CPU extension supported. [ 2.265030] Registering SWP/SWPB emulation handler [ 2.270127] SmartReflex Class3 initialized [ 2.342395] mmc1: new high speed MMC card at address 0001 [ 2.356407] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.367054] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.380684] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.387981] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.395792] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.410689] mmcblk1: p1 p2 [ 2.418895] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.436770] hctosys: unable to open rtc device (rtc0) [ 2.442289] sr_init: No PMIC hook to init smartreflex [ 2.447977] sr_init: platform driver register failed for SR [ 2.494493] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.207609] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.214683] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.240217] rtc-ds1307 2-006f: SET TIME! [ 2.245952] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.252624] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.260930] rtc-ds1307 2-006f: 64 bytes nvram [ 2.265537] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.273712] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.279494] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.287729] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.296891] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.303775] hub 1-0:1.0: USB hub found [ 2.307747] hub 1-0:1.0: 1 port detected [ 2.312155] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.317923] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.326023] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.335048] hub 2-0:1.0: USB hub found [ 2.339003] hub 2-0:1.0: 1 port detected [ 2.345105] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.413973] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.432083] aic_dvdd_fixed: disabling [ 2.436799] Waiting for root device /dev/mmcblk0p1... [ 2.463964] mmc1: new high speed MMC card at address 0001 [ 2.469942] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.474829] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.481170] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.488065] mmcblk1: p1 [ 2.619715] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.649742] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.678133] hub 2-1:1.0: USB hub found [ 2.682134] hub 2-1:1.0: 4 ports detected [ 2.774158] hub 1-1:1.0: USB hub found [ 2.778136] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.208386] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.215451] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.240187] rtc-ds1307 2-006f: SET TIME! [ 2.245944] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.252604] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.260903] rtc-ds1307 2-006f: 64 bytes nvram [ 2.265501] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.273667] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.279438] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.287658] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.296806] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.303683] hub 1-0:1.0: USB hub found [ 2.307657] hub 1-0:1.0: 1 port detected [ 2.312057] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.317819] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.325917] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.334933] hub 2-0:1.0: USB hub found [ 2.338877] hub 2-0:1.0: 1 port detected [ 2.344948] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.412432] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.430167] aic_dvdd_fixed: disabling [ 2.434906] Waiting for root device /dev/mmcblk0p1... [ 2.456741] mmc1: new high speed MMC card at address 0001 [ 2.462715] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.467601] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.473942] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.480817] mmcblk1: p1 [ 2.619678] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.649706] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.678027] hub 2-1:1.0: USB hub found [ 2.682029] hub 2-1:1.0: 4 ports detected [ 2.774049] hub 1-1:1.0: USB hub found [ 2.778033] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.025294] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.032340] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.058200] rtc-ds1307 2-006f: SET TIME! [ 2.063828] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.070496] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.078798] rtc-ds1307 2-006f: 64 bytes nvram [ 2.083375] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.090734] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.096496] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.104700] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.113845] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.120576] hub 1-0:1.0: USB hub found [ 2.124529] hub 1-0:1.0: 1 port detected [ 2.128838] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.134609] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.142681] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.151547] hub 2-0:1.0: USB hub found [ 2.155492] hub 2-0:1.0: 1 port detected [ 2.160766] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.224483] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.237483] aic_dvdd_fixed: disabling [ 2.244936] Waiting for root device /dev/mmcblk0p1... [ 2.289743] mmc1: new high speed MMC card at address 0001 [ 2.295614] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.300455] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.306742] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.313527] mmcblk1: p1 [ 2.452741] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.467764] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.494790] hub 2-1:1.0: USB hub found [ 2.498758] hub 2-1:1.0: 4 ports detected [ 2.590788] hub 1-1:1.0: USB hub found [ 2.594757] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:06]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:07]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.674985] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.681302] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.688191] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.698598] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.703449] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.709767] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.716614] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.726212] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.735717] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.742772] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.788982] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.795278] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.802156] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.811745] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.821247] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.828285] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.834406] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.840725] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.847575] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.857168] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.866669] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.873705] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.919232] hctosys: unable to open rtc device (rtc0) [ 2.924535] sr_init: No PMIC hook to init smartreflex [ 2.930062] sr_init: platform driver register failed for SR [ 2.976906] aic_dvdd_fixed: disabling [ 2.982184] ldousb: disabling [ 2.990311] Waiting for root device /dev/mmcblk0p1... [ 3.040598] mmc1: new high speed MMC card at address 0001 [ 3.048393] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 3.053828] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.060615] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.069198] mmcblk1: p1
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.543145] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.550102] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.556625] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.563503] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.569090] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.576637] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.586654] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.598290] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.604923] [drm] No driver support for vblank timestamp query. [ 3.610866] drm drm: No connectors reported connected with modes [ 3.616875] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.643295] Console: switching to colour frame buffer device 128x48 [ 3.655551] drm drm: fb0: frame buffer device [ 3.673808] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.684685] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.691149] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.696560] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.704392] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.718820] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.726067] hub 1-0:1.0: USB hub found [ 3.729839] hub 1-0:1.0: 1 port detected [ 3.734807] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.740217] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.747956] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.763812] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.770957] hub 2-0:1.0: USB hub found [ 3.774723] hub 2-0:1.0: 1 port detected [ 3.785081] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.798571] vdd_sata,avdd_plle: disabling [ 3.803365] usb1_vbus: disabling [ 3.807470] Waiting for root device /dev/mmcblk0p1... [ 4.088817] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.032814] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:50]: got exception: timeout ~$off
[PYBOOT] [beaver 01:51]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.472437] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.479389] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.485905] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.492740] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.498324] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.504937] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.514929] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.525289] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.531905] [drm] No driver support for vblank timestamp query. [ 3.537838] drm drm: No connectors reported connected with modes [ 3.543839] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.563175] Console: switching to colour frame buffer device 128x48 [ 3.574917] drm drm: fb0: frame buffer device [ 3.579354] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.589245] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.595693] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.601098] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.608824] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.622835] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.629191] hub 1-0:1.0: USB hub found [ 3.632956] hub 1-0:1.0: 1 port detected [ 3.637632] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.643039] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.650706] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.662832] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.669139] hub 2-0:1.0: USB hub found [ 3.672898] hub 2-0:1.0: 1 port detected [ 3.680384] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.693546] vdd_sata,avdd_plle: disabling [ 3.697937] usb1_vbus: disabling [ 3.701821] Waiting for root device /dev/mmcblk0p1... [ 3.982837] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.921406] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:50]: got exception: timeout ~$off
[PYBOOT] [beaver 01:51]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.684196] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.691150] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.696755] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.704291] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.714292] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.727135] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.733834] [drm] No driver support for vblank timestamp query. [ 3.739823] drm drm: No connectors reported connected with modes [ 3.745836] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.771897] Console: switching to colour frame buffer device 128x48 [ 3.783667] drm drm: fb0: frame buffer device [ 3.810774] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.820055] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.826533] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.831967] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.839948] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.860781] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.868502] hub 1-0:1.0: USB hub found [ 3.872282] hub 1-0:1.0: 1 port detected [ 3.877094] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.882522] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.890393] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.910777] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.918372] hub 2-0:1.0: USB hub found [ 3.922146] hub 2-0:1.0: 1 port detected [ 3.930453] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.949090] vdd_sata,avdd_plle: disabling [ 3.953513] usb1_vbus: disabling [ 3.956922] ALSA device list: [ 3.959880] #0: NVIDIA Tegra Beaver [ 3.964119] Waiting for root device /dev/mmcblk0p1... [ 4.240781] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.226187] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:43]: got exception: timeout ~$off
[PYBOOT] [beaver 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.824730] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.839339] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.419714] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.833003] eth0: device MAC address 22:e1:43:15:57:b2 [ 89.986142] RX IPC Checksum Offload disabled [ 89.990760] No MAC Management Counters available [ 89.996534] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/22:e1:43:15:57:b2 Sending on LPF/eth0/22:e1:43:15:57:b2 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:18]: got exception: timeout ~$off
[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.447448] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.521695] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.532024] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.606206] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.616525] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.690760] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.701090] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.775265] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.785591] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.859831] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.870153] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.944384] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.954707] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.028964] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.039299] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.113521] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.123844] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.198081] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.208404] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.282631] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.292949] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.367118] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.377444] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.451678] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.461995] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.536161] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.546481] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.620714] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.631034] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.705220] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.715544] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.789777] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.800099] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.171824] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.245802] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.255876] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.329854] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.339935] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.413914] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.423995] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.497974] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.508056] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.582040] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.592110] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.666090] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.676161] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.750143] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.760267] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.834251] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.844326] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.918308] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.928376] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.002358] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.012428] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.086410] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.096487] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.170466] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.180538] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.254517] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.264590] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.338567] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.348641] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.422625] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.432702] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.506683] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.516760] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:08]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.963377] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.037290] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.047350] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.121263] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.131324] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.205233] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.215289] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.289202] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.299262] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.373182] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.383244] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.457161] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.467226] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.541146] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.551194] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.625101] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.635150] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.709066] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.719121] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.793028] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.803078] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.876992] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.887051] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.960966] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.971026] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.044936] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.054990] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.128901] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.138963] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.212877] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.222937] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.296852] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.306909] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:16]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:17]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.888895] can: netlink gateway (rev 20130117) max_hops=1 [ 2.895862] Key type dns_resolver registered [ 2.902313] ThumbEE CPU extension supported. [ 2.906629] Registering SWP/SWPB emulation handler [ 2.925024] usb1_vbus: supplied by vdd-sys-5v0 [ 2.934768] usb2_vbus: supplied by vdd-sys-5v0 [ 2.951343] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.974273] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.981027] [drm] No driver support for vblank timestamp query. [ 3.004704] mmc1: new high speed MMC card at address 0001 [ 3.013808] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.020956] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.029654] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.036699] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.046972] mmcblk1: p1 [ 3.162636] Console: switching to colour frame buffer device 240x75 [ 3.249775] drm drm: fb0: frame buffer device [ 3.267478] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.282470] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288055] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.296751] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.312490] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.323024] hub 1-0:1.0: USB hub found [ 3.327041] hub 1-0:1.0: 1 port detected [ 3.337682] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.352389] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.414070] dvdd_ts: disabling [ 3.417287] usb1_vbus: disabling [ 3.420546] vdd_cam_1v8_reg: disabling [ 3.427970] Waiting for root device /dev/mmcblk0p1... [ 3.642513] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.621148] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.412439] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:10]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:11]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.911235] can: netlink gateway (rev 20130117) max_hops=1 [ 2.918323] Key type dns_resolver registered [ 2.924714] ThumbEE CPU extension supported. [ 2.929106] Registering SWP/SWPB emulation handler [ 2.944158] usb1_vbus: supplied by vdd-sys-5v0 [ 2.952580] usb2_vbus: supplied by vdd-sys-5v0 [ 2.970692] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.991086] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.997899] [drm] No driver support for vblank timestamp query. [ 3.016694] mmc1: new high speed MMC card at address 0001 [ 3.025833] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.031571] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.041536] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.050043] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.060246] mmcblk1: p1 [ 3.176352] Console: switching to colour frame buffer device 240x75 [ 3.263382] drm drm: fb0: frame buffer device [ 3.282434] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.297444] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.303052] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.311753] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.327446] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.337830] hub 1-0:1.0: USB hub found [ 3.341832] hub 1-0:1.0: 1 port detected [ 3.352427] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.367344] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.429341] dvdd_ts: disabling [ 3.432557] usb1_vbus: disabling [ 3.435816] vdd_cam_1v8_reg: disabling [ 3.443524] Waiting for root device /dev/mmcblk0p1... [ 3.652451] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.640625] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.091492] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:05]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.427999] can: raw protocol (rev 20120528) [ 2.432314] can: broadcast manager protocol (rev 20120528 t) [ 2.438033] can: netlink gateway (rev 20130117) max_hops=1 [ 2.444609] Key type dns_resolver registered [ 2.449619] ThumbEE CPU extension supported. [ 2.471651] usb1_vbus: supplied by vdd-sys-5v0 [ 2.479946] usb2_vbus: supplied by vdd-sys-5v0 [ 2.494253] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.518891] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.525573] [drm] No driver support for vblank timestamp query. [ 2.690908] Console: switching to colour frame buffer device 240x75 [ 2.779385] drm drm: fb0: frame buffer device [ 2.784117] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.794980] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.800536] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.808928] mmc1: new high speed MMC card at address 0001 [ 2.815458] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.821744] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.826771] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.832888] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.841445] hub 1-0:1.0: USB hub found [ 2.845431] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.851628] hub 1-0:1.0: 1 port detected [ 2.855937] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.865832] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.873870] mmcblk1: p1 [ 2.881972] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.922409] dvdd_ts: disabling [ 2.925537] usb1_vbus: disabling [ 2.928837] vdd_cam_1v8_reg: disabling [ 2.934187] Waiting for root device /dev/mmcblk0p1... [ 3.172131] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.124308] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.928415] Bluetooth: RFCOMM socket layer initialized [ 2.933637] Bluetooth: RFCOMM ver 1.11 [ 2.937547] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.942974] Bluetooth: BNEP socket layer initialized [ 2.948038] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.954040] Bluetooth: HIDP socket layer initialized [ 2.960894] Key type dns_resolver registered [ 2.970340] Registering SWP/SWPB emulation handler [ 2.990697] usb1_vbus: supplied by vdd-sys-5v0 [ 3.000066] usb2_vbus: supplied by vdd-sys-5v0 [ 3.013785] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.040817] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.047587] [drm] No driver support for vblank timestamp query. [ 3.226774] Console: switching to colour frame buffer device 240x75 [ 3.314085] drm drm: fb0: frame buffer device [ 3.347570] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.356638] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.362567] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.371804] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.397576] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.411745] hub 1-0:1.0: USB hub found [ 3.415709] hub 1-0:1.0: 1 port detected [ 3.429762] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.445295] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.540039] dvdd_ts: disabling [ 3.543143] usb1_vbus: disabling [ 3.546404] vdd_cam_1v8_reg: disabling [ 3.551106] ALSA device list: [ 3.554100] #0: NVIDIA Tegra Dalmore [ 3.559962] Waiting for root device /dev/mmcblk0p1... [ 3.737583] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.761289] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.297528] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:49]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:50]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.753880] usbhid: USB HID core driver [ 1.761770] NET: Registered protocol family 10 [ 1.762600] sit: IPv6 over IPv4 tunneling driver [ 1.767867] NET: Registered protocol family 17 [ 1.771115] NET: Registered protocol family 15 [ 1.775585] Key type dns_resolver registered [ 1.779908] Registering SWP/SWPB emulation handler [ 1.785644] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.790162] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.797581] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.817073] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.821340] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.828263] max98090 1-0010: MAX98090 REVID=0x43 [ 1.830544] max98090 1-0010: use default 2.8v micbias [ 1.833059] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.833064] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.833594] hub 1-3:1.0: USB hub found [ 1.833700] hub 1-3:1.0: 3 ports detected [ 1.857112] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.859163] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.875269] mmc1: new DDR MMC card at address 0001 [ 1.880325] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.884534] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.890351] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.896027] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.905250] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.911852] mmcblk1: p1 p2 [ 1.912943] VDD10_HDMI_1.0V: disabling [ 1.913591] vdd_g3d: disabling [ 1.914216] BUCK8_2.8V: disabling [ 1.915543] ALSA device list: [ 1.915546] #0: Odroid-U3 [ 1.931781] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:47]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.637873] isl29018 7-0044: No cache defaults, reading back from HW [ 1.644230] isl29018 7-0044: Failed to read 1: -6 [ 1.648813] isl29018 7-0044: regmap initialization fails: -6 [ 1.658947] NET: Registered protocol family 10 [ 1.663358] sit: IPv6 over IPv4 tunneling driver [ 1.666950] NET: Registered protocol family 17 [ 1.670948] can: controller area network core (rev 20120528 abi 9) [ 1.677138] NET: Registered protocol family 29 [ 1.681527] can: raw protocol (rev 20120528) [ 1.685757] can: broadcast manager protocol (rev 20120528 t) [ 1.691419] can: netlink gateway (rev 20130117) max_hops=1 [ 1.697134] Key type dns_resolver registered [ 1.701447] ThumbEE CPU extension supported. [ 1.705367] Registering SWP/SWPB emulation handler [ 1.714531] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.720023] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.726379] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.731753] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.741821] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.751417] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.756851] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.767059] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.773231] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.778607] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.788327] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.810489] Waiting for root device /dev/mmcblk0p1... [ 1.814370] mmc0: tuning execution failed: -5 [ 1.818421] mmc0: error -5 whilst initialising MMC card [ 2.682887] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.696265] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.701727] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.708099] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.713483] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:01]: got exception: timeout ~$off
[PYBOOT] [pi 02:02]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.637912] isl29018 7-0044: No cache defaults, reading back from HW [ 1.644267] isl29018 7-0044: Failed to read 1: -6 [ 1.648851] isl29018 7-0044: regmap initialization fails: -6 [ 1.658988] NET: Registered protocol family 10 [ 1.663401] sit: IPv6 over IPv4 tunneling driver [ 1.666996] NET: Registered protocol family 17 [ 1.670996] can: controller area network core (rev 20120528 abi 9) [ 1.677186] NET: Registered protocol family 29 [ 1.681574] can: raw protocol (rev 20120528) [ 1.685804] can: broadcast manager protocol (rev 20120528 t) [ 1.691465] can: netlink gateway (rev 20130117) max_hops=1 [ 1.697181] Key type dns_resolver registered [ 1.701498] ThumbEE CPU extension supported. [ 1.705415] Registering SWP/SWPB emulation handler [ 1.714560] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.720047] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.726407] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.731783] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.741851] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.751456] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.756890] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.767097] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.773269] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.778646] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.788368] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.810529] Waiting for root device /dev/mmcblk0p1... [ 1.814405] mmc0: tuning execution failed: -5 [ 1.818460] mmc0: error -5 whilst initialising MMC card [ 2.682912] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.696288] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.701746] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.708120] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.713505] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:03]: got exception: timeout ~$off
[PYBOOT] [pi 02:04]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 523264 [ 0.000000] free_area_init_node: node 0, pgdat c10fa800, node_mem_map eeff7000 [ 2.106905] [c1039560] *pgd=4100041e(bad) [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 2.119578] Modules linked in: [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 326656 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc3-next-20160415 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b468>] (show_stack+0x10/0x14) [ 0.000000] [<c030b468>] (show_stack) from [<c0335f48>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335f48>] (__warn) from [<c0335f98>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335f98>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x974) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521728 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1995372K/2093056K available (8457K kernel code, 1009K rwdata, 3616K rodata, 1024K init, 304K bss, 32148K reserved, 65536K cma-reserved, 1241088K highmem)
[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:12]: got exception: timeout ~$off
[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.061676] can: controller area network core (rev 20120528 abi 9) [ 2.067932] NET: Registered protocol family 29 [ 2.072387] can: raw protocol (rev 20120528) [ 2.076660] can: broadcast manager protocol (rev 20120528 t) [ 2.082336] can: netlink gateway (rev 20130117) max_hops=1 [ 2.088348] Key type dns_resolver registered [ 2.092773] ThumbEE CPU extension supported. [ 2.097076] Registering SWP/SWPB emulation handler [ 2.110565] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.118286] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.128479] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.135681] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.142822] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.147308] mmc3: new high speed MMC card at address 0001 [ 2.148895] mmcblk3: mmc3:0001 3.53 GiB [ 2.149505] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.150085] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.150756] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.160308] mmcblk3: p1 p2 p3 p4 [ 2.178985] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.202239] db8500-esram12: disabling [ 2.206207] db8500-esram34: disabling [ 2.210235] V-CSI/DSI: disabling [ 2.213500] mmci-reg: disabling [ 2.217163] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.223144] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.229461] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:06]: got exception: timeout ~$off
[PYBOOT] [snowball 02:07]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.952117] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.959564] ledtrig-cpu: registered to indicate activity on CPUs [ 1.965881] usbcore: registered new interface driver usbhid [ 1.971466] usbhid: USB HID core driver [ 1.978485] NET: Registered protocol family 10 [ 1.983978] sit: IPv6 over IPv4 tunneling driver [ 1.989135] NET: Registered protocol family 17 [ 1.993591] can: controller area network core (rev 20120528 abi 9) [ 1.999816] NET: Registered protocol family 29 [ 2.004272] can: raw protocol (rev 20120528) [ 2.008514] can: broadcast manager protocol (rev 20120528 t) [ 2.014190] can: netlink gateway (rev 20130117) max_hops=1 [ 2.020080] Key type dns_resolver registered [ 2.024505] ThumbEE CPU extension supported. [ 2.037017] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.043731] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.052825] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.059844] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.066802] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.073791] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.085723] db8500-esram12: disabling [ 2.089508] db8500-esram34: disabling [ 2.093444] V-CSI/DSI: disabling [ 2.096710] mmci-reg: disabling [ 2.100372] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.106353] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.113555] Waiting for root device /dev/mmcblk0p4... [ 2.151580] mmc3: new high speed MMC card at address 0001 [ 2.157409] mmcblk3: mmc3:0001 3.53 GiB [ 2.161621] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.167144] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.172668] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.178955] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:59]: got exception: timeout ~$off
[PYBOOT] [snowball 02:00]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.541320] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.547576] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.560028] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.570831] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.580810] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.591583] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.614959] NET: Registered protocol family 10 [ 2.620391] sit: IPv6 over IPv4 tunneling driver [ 2.625762] NET: Registered protocol family 17 [ 2.630310] NET: Registered protocol family 35 [ 2.634826] NET: Registered protocol family 37 [ 2.639373] Registering SWP/SWPB emulation handler [ 2.645904] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.657958] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-03-27 02:25:27 UTC (954123927) [ 2.667358] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.674407] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.681427] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.688385] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.702239] db8500-esram12: disabling [ 2.705963] db8500-esram34: disabling [ 2.709869] V-CSI/DSI: disabling [ 2.713195] mmci-reg: disabling [ 2.716491] ALSA device list: [ 2.719451] #0: MOP500-card [ 2.722808] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.728759] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.734985] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.
kernel-build-reports@lists.linaro.org