Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc7-98-g422ce5a/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:55.20 bbb arm-multi_v7_defconfig : FAILED 1:57.86 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.69 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.73 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.09 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.42 cosmic arm-multi_v7_defconfig : FAILED 2:08.53 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.47 dalmore arm-multi_v7_defconfig : FAILED 2:04.00 dalmore arm-multi_lpae_defconfig : FAILED 2:03.00 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.96 omap5uevm arm-multi_v7_defconfig : FAILED 0:56.47 omap5uevm arm-multi_lpae_defconfig : FAILED 0:49.32 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:48.76 seaboard arm-multi_v7_defconfig : FAILED 1:52.97 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.69 snowball arm-multi_v7_defconfig : FAILED 2:08.00 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:11.46 arndale arm-exynos_defconfig : passed 1:33.29 arndale arm-multi_v7_defconfig : passed 1:25.88 arndale arm-multi_lpae_defconfig : passed 1:28.77 capri arm-bcm_defconfig : passed 0:52.07 capri arm-multi_v7_defconfig : passed 0:49.80 chitra powerpc-ppc64_defconfig : passed 2:05.43 colombus arm-sunxi_defconfig : passed 2:24.27 colombus arm-multi_v7_defconfig : passed 2:30.61 colombus arm-multi_lpae_defconfig : passed 2:29.03 cubie arm-sunxi_defconfig : passed 0:56.54 cubie arm-multi_v7_defconfig : passed 0:53.81 cubie2 arm-sunxi_defconfig : passed 0:59.30 cubie2 arm-multi_v7_defconfig : passed 0:53.16 cubie2 arm-multi_lpae_defconfig : passed 0:52.18 cubox arm-multi_v7_defconfig : passed 1:33.47 cubox arm-mvebu_v7_defconfig : passed 0:57.24 hummingboard arm-imx_v6_v7_defconfig : passed 1:27.44 hummingboard arm-multi_v7_defconfig : passed 1:30.92 jetsontk1 arm-tegra_defconfig : passed 1:42.00 jetsontk1 arm-multi_v7_defconfig : passed 1:39.60 jetsontk1 arm-multi_lpae_defconfig : passed 1:41.55 omap5uevm arm-omap2plus_defconfig : passed 1:06.76 pandaes arm-omap2plus_defconfig : warnings 1:36.96 pandaes arm-multi_v7_defconfig : passed 1:43.61 pi arm-exynos_defconfig : passed 2:10.10 pi arm-multi_v7_defconfig : passed 2:24.54 pi arm-multi_lpae_defconfig : passed 2:23.95 pit arm-exynos_defconfig : passed 2:11.92 pit arm-multi_v7_defconfig : passed 2:16.13 pit arm-multi_lpae_defconfig : passed 2:15.17 seattle arm64-defconfig : warnings 2:20.93 snow arm-exynos_defconfig : passed 2:07.14 snow arm-multi_v7_defconfig : passed 1:54.72 snow arm-multi_lpae_defconfig : passed 1:58.36 trimslice arm-tegra_defconfig : passed 2:41.29 trimslice arm-multi_v7_defconfig : passed 1:50.70 wandboard arm-imx_v6_v7_defconfig : passed 1:14.58 wandboard arm-multi_v7_defconfig : passed 1:13.40
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.93 beaver arm-multi_v7_defconfig : OFFLINE 2:18.98 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.51 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:23.20 parallella arm-multi_v7_defconfig : OFFLINE 2:14.82 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.19 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:54.39 sama5 arm-sama5_defconfig : OFFLINE 2:22.09 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:14.53 socfpga arm-socfpga_defconfig : OFFLINE 2:17.38 socfpga arm-multi_v7_defconfig : OFFLINE 2:27.03
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.626068] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636359] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643452] usbcore: registered new interface driver usbhid [ 1.649375] usbhid: USB HID core driver [ 1.661387] NET: Registered protocol family 10 [ 1.667995] sit: IPv6 over IPv4 tunneling driver [ 1.674138] NET: Registered protocol family 17 [ 1.678905] can: controller area network core (rev 20120528 abi 9) [ 1.685542] NET: Registered protocol family 29 [ 1.690266] can: raw protocol (rev 20120528) [ 1.694789] can: broadcast manager protocol (rev 20120528 t) [ 1.700786] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707558] Key type dns_resolver registered [ 1.712459] omap_voltage_late_init: Voltage driver support not added [ 1.720731] ThumbEE CPU extension supported. [ 1.725354] Registering SWP/SWPB emulation handler [ 1.767564] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.774085] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781840] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790515] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798430] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806246] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.814052] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821406] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.830088] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.838025] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847755] mmc1: new high speed MMC card at address 0001 [ 1.854990] hctosys: unable to open rtc device (rtc0) [ 1.867954] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.873969] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.880955] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889787] mmcblk1: p1 p2 [ 1.895499] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:56]: got exception: timeout ~$off
[PYBOOT] [bbb 01:57]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.032147] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.038264] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.044605] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.051480] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.061074] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.070569] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.077586] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.121000] ledtrig-cpu: registered to indicate activity on CPUs [ 2.129688] oprofile: using arm/armv7 [ 2.134777] Initializing XFRM netlink socket [ 2.139852] NET: Registered protocol family 10 [ 2.150529] sit: IPv6 over IPv4 tunneling driver [ 2.159273] NET: Registered protocol family 17 [ 2.164194] NET: Registered protocol family 15 [ 2.169423] Key type dns_resolver registered [ 2.174353] omap_voltage_late_init: Voltage driver support not added [ 2.181088] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.189552] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.199789] ThumbEE CPU extension supported. [ 2.204437] Registering SWP/SWPB emulation handler [ 2.209468] SmartReflex Class3 initialized [ 2.278843] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.286128] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.296643] mmc1: new high speed MMC card at address 0001 [ 2.308712] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.316976] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.324752] hctosys: unable to open rtc device (rtc0) [ 2.330072] sr_init: No PMIC hook to init smartreflex [ 2.335861] sr_init: platform driver register failed for SR [ 2.375650] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.383611] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.397870] mmcblk1: p1 p2 [ 2.415331] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.708108] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.715185] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.740759] rtc-ds1307 2-006f: SET TIME! [ 1.746534] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.753289] rtc-ds1307 2-006f: 64 bytes nvram [ 1.757903] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.766101] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.771890] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.780130] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.789306] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.796194] hub 1-0:1.0: USB hub found [ 1.800148] hub 1-0:1.0: 1 port detected [ 1.804549] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.810329] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.818452] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.827460] hub 2-0:1.0: USB hub found [ 1.831433] hub 2-0:1.0: 1 port detected [ 1.837443] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.871359] vdd_3v3: supplied by regen1 [ 1.907961] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.925499] aic_dvdd_fixed: disabling [ 1.930239] Waiting for root device /dev/mmcblk0p1... [ 1.952293] mmc1: new high speed MMC card at address 0001 [ 1.958269] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.963153] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.969488] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.976361] mmcblk1: p1 [ 2.110231] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.145261] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.170555] hub 2-1:1.0: USB hub found [ 2.174535] hub 2-1:1.0: 4 ports detected [ 2.266583] hub 1-1:1.0: USB hub found [ 2.270576] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.718023] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.725103] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750780] rtc-ds1307 2-006f: SET TIME! [ 1.756561] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763314] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767930] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776128] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781917] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790164] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799333] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806211] hub 1-0:1.0: USB hub found [ 1.810165] hub 1-0:1.0: 1 port detected [ 1.814566] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820335] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828447] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837442] hub 2-0:1.0: USB hub found [ 1.841405] hub 2-0:1.0: 1 port detected [ 1.847404] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881401] vdd_3v3: supplied by regen1 [ 1.918030] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935579] aic_dvdd_fixed: disabling [ 1.940328] Waiting for root device /dev/mmcblk0p1... [ 1.962330] mmc1: new high speed MMC card at address 0001 [ 1.968303] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.973198] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.979536] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.986406] mmcblk1: p1 [ 2.120270] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155299] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180554] hub 2-1:1.0: USB hub found [ 2.184534] hub 2-1:1.0: 4 ports detected [ 2.276580] hub 1-1:1.0: USB hub found [ 2.280566] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.173816] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180693] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191083] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.195938] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202233] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209102] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218700] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228188] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235249] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283670] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289968] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296846] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306441] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315946] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322990] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329112] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335424] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342272] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351856] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361362] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368408] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375102] vdd_3v3: supplied by regen1 [ 2.413958] hctosys: unable to open rtc device (rtc0) [ 2.419256] sr_init: No PMIC hook to init smartreflex [ 2.424762] sr_init: platform driver register failed for SR [ 2.465415] mmc1: new high speed MMC card at address 0001 [ 2.472888] aic_dvdd_fixed: disabling [ 2.473339] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.473969] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.474586] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.489208] mmcblk1: p1 [ 2.496960] ldousb: disabling [ 2.503083] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.484112] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.558345] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.568665] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.642843] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.653163] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.727396] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.737720] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.811895] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.822212] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.896458] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.906791] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.980978] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.991306] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.065555] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.075948] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.150136] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.160458] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.234698] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.245017] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.319253] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.329572] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.403805] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.414125] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.488352] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.498672] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.572850] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.583173] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.657400] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.667717] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.741903] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.752227] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.826455] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.836774] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.079365] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.153350] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.163441] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.237432] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.247511] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.321491] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.331571] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.405550] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.415631] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.489612] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.499691] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.573680] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.583745] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.657767] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.667832] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.741814] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.751884] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.825864] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.835934] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.909912] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.919985] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.993973] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.004045] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.078032] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.088106] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.162086] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.172157] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.246138] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.256217] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.330203] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.340277] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.414258] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.424336] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.481653] Key type dns_resolver registered [ 2.488064] ThumbEE CPU extension supported. [ 2.492492] Registering SWP/SWPB emulation handler [ 2.520749] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.528791] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.539090] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.553084] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.559882] [drm] No driver support for vblank timestamp query. [ 2.584107] mmc1: new high speed MMC card at address 0001 [ 2.592950] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.602377] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.612020] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.621823] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.632353] mmcblk1: p1 [ 2.739909] Console: switching to colour frame buffer device 240x75 [ 2.827353] drm drm: fb0: frame buffer device [ 2.843779] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.853874] usb2_vbus: supplied by vdd-sys-5v0 [ 2.865580] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.871174] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.879941] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.893798] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.904096] hub 1-0:1.0: USB hub found [ 2.908088] hub 1-0:1.0: 1 port detected [ 2.918573] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.932857] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.994829] dvdd_ts: disabling [ 2.997931] usb1_vbus: disabling [ 3.001285] vdd_cam_1v8_reg: disabling [ 3.008805] Waiting for root device /dev/mmcblk0p1... [ 3.224124] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.201128] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.833763] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:01]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:02]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.481360] Key type dns_resolver registered [ 2.487771] ThumbEE CPU extension supported. [ 2.492193] Registering SWP/SWPB emulation handler [ 2.517083] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.524147] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.535665] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.549915] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.556655] [drm] No driver support for vblank timestamp query. [ 2.578533] mmc1: new high speed MMC card at address 0001 [ 2.587654] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.593399] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.602012] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.610693] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.621260] mmcblk1: p1 [ 2.734002] Console: switching to colour frame buffer device 240x75 [ 2.821295] drm drm: fb0: frame buffer device [ 2.839049] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.849143] usb2_vbus: supplied by vdd-sys-5v0 [ 2.860855] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.866449] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.875208] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.889069] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.898281] hub 1-0:1.0: USB hub found [ 2.902360] hub 1-0:1.0: 1 port detected [ 2.912050] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.926164] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.988818] dvdd_ts: disabling [ 2.991916] usb1_vbus: disabling [ 2.995231] vdd_cam_1v8_reg: disabling [ 3.002554] Waiting for root device /dev/mmcblk0p1... [ 3.214090] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.192653] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.181857] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:01]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:03]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.677725] Bluetooth: RFCOMM ver 1.11 [ 2.681660] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.687055] Bluetooth: BNEP socket layer initialized [ 2.692140] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.698137] Bluetooth: HIDP socket layer initialized [ 2.705122] Key type dns_resolver registered [ 2.714771] Registering SWP/SWPB emulation handler [ 2.744946] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.750073] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.758828] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.781860] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.788514] [drm] No driver support for vblank timestamp query. [ 2.965468] Console: switching to colour frame buffer device 240x75 [ 3.052346] drm drm: fb0: frame buffer device [ 3.080536] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.087809] usb2_vbus: supplied by vdd-sys-5v0 [ 3.096233] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.102096] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.111216] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.130541] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.144609] hub 1-0:1.0: USB hub found [ 3.148572] hub 1-0:1.0: 1 port detected [ 3.162824] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.178458] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.274032] dvdd_ts: disabling [ 3.277138] usb1_vbus: disabling [ 3.280519] vdd_cam_1v8_reg: disabling [ 3.285187] ALSA device list: [ 3.288180] #0: NVIDIA Tegra Dalmore [ 3.294076] Waiting for root device /dev/mmcblk0p1... [ 3.470528] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.494774] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.030499] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.652546] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.661465] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.692589] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.693768] usbcore: registered new interface driver usbhid [ 1.699004] usbhid: USB HID core driver [ 1.707721] NET: Registered protocol family 10 [ 1.708347] sit: IPv6 over IPv4 tunneling driver [ 1.711549] NET: Registered protocol family 17 [ 1.715582] NET: Registered protocol family 15 [ 1.720045] Key type dns_resolver registered [ 1.724374] Registering SWP/SWPB emulation handler [ 1.730226] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.734609] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.742011] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.773106] max98090 1-0010: MAX98090 REVID=0x43 [ 1.775366] max98090 1-0010: use default 2.8v micbias [ 1.778051] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.787501] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.797005] mmc1: new DDR MMC card at address 0001 [ 1.799820] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.803187] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.814795] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.819009] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.824902] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.830806] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.837406] mmcblk1: p1 p2 [ 1.840573] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.865502] VDD10_HDMI_1.0V: disabling [ 1.866215] vdd_g3d: disabling [ 1.867288] BUCK8_2.8V: disabling [ 1.87a343] ALSA device list: [ 1.872919] #0: Odroid-U3 [ 1.876647] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.095909] task: ee06c000 ti: ee05a000 task.ti: ee05a000 [ 2.101560] PC is at kset_find_obj+0x24/0xb0 [ 2.106027] LR is at kset_find_obj+0x38/0xb0 [ 2.110493] pc : [<c058dac4>] lr : [<c058dad8>] psr: 80000013 [ 2.110493] sp : ee05bed8 ip : c13a29c0 fp : 00000000 [ 2.122514] r10: 00000008 r9 : 00000118 r8 : 00000000 [ 2.127985] r7 : c1140c94 r6 : c0edb1d8 r5 : ee042700 r4 : 2d71822c [ 2.134818] r3 : 00000073 r2 : 00000067 r1 : c0edb1d9 r0 : 00000001 [ 2.141654] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 2.149130] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.155149] Process swapper/0 (pid: 1, stack limit = 0xee05a220) [ 2.161441] Stack: (0xee05bed8 to 0xee05c000) [ 2.166000] bec0: c13bde7c c1306890 [ 2.174568] bee0: ee6e54c0 c077b8ec c13bde7c c077b970 c1306890 c1306890 ee6e54c0 c0301e7c [ 2.183131] bf00: 00000000 cccccccd 00000000 c0464e3c c0c0b400 ee132880 00000000 c133659c [ 2.191696] bf20: c101e854 c0c1ceac 00000118 c035b858 c0eca0f8 c101d274 00000000 00000007 [ 2.200268] bf40: 00000007 c0ee0748 c1336584 c1410000 c1410000 c1410000 c1410000 c1203228 [ 2.208837] bf60: c11a3838 c11a383c 00000118 c1100db0 00000007 00000007 00000000 c11005ac [ 2.217405] bf80: 00000000 00000000 c0b50b64 00000000 00000000 00000000 00000000 00000000 [ 2.225963] bfa0: 00000000 c0b50b6c 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.234531] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.243092] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 4999c0c5 e9d899e8 [ 2.251667] [<c058dac4>] (kset_find_obj) from [<c077b8ec>] (driver_find+0x14/0x30) [ 2.259597] [<c077b8ec>] (driver_find) from [<c077b970>] (driver_register+0x68/0xf4) [ 2.267710] [<c077b970>] (driver_register) from [<c0301e7c>] (do_one_initcall+0x90/0x1d4) [ 2.276284] [<c0301e7c>] (do_one_initcall) from [<c1100db0>] (kernel_init_freeable+0x158/0x1e8) [ 2.285398] [<c1100db0>] (kernel_init_freeable) from [<c0b50b6c>] (kernel_init+0x8/0x114) [ 2.293963] [<c0b50b6c>] (kernel_init) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.301896] Code: e5954000 e1550004 12444004 0a00000a (e5940000) [ 2.308316] ---[ end trace 3a5689167deb083e ]--- [ 2.313168] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.313168] [ 3.299697] SMP: failed to stop secondary CPUs [ 3.304344] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.304344]
[PYBOOT] [omap5uevm 00:47]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:48]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 9.663465] PC is at cpu_needs_another_gp+0x58/0xac [ 9.668564] LR is at rcu_check_callbacks+0x23c/0x7a4 [ 9.673753] pc : [<c038dff8>] lr : [<c0391400>] psr: 60000193 [ 9.673753] sp : c1301dc8 ip : fffffef2 fp : c1337d00 [ 9.685758] r10: c1302534 r9 : 2ddc5000 r8 : c1301dc8 [ 9.691215] r7 : 00000000 r6 : c12089c0 r5 : c1337d00 r4 : eefcd9c0 [ 9.698039] r3 : eefcd9e0 r2 : 00000000 r1 : eefcd9c0 r0 : c1337d00 [ 9.704863] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 9.712410] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 9.718416] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 9.724692] Stack: (0xc1301dc8 to 0xc1302000) [ 9.729246] 1dc0: c12082c0 eefcd2c0 eefcd2c0 c12082c0 c130252c c1337f80 [ 9.737798] 1de0: c1302100 fffffef2 00000000 c1208980 c1337a80 c1300000 00000000 c1306a80 [ 9.746352] 1e00: c1301e00 c1301e00 00000000 ffffe000 c1306a80 00000000 00000002 eefc9c8c [ 9.754902] 1e20: eefc9c80 00000000 ffffffff c0393fcc eefc9e90 c1301f50 3d6590d1 c03a4e38 [ 9.763455] 1e40: eefc9e90 eefc9c80 3d6590d1 00000002 eefc9c40 eefc9c40 eefc9e90 3d658f8c [ 9.772008] 1e60: 00000002 c0394d28 8c329aac 00000001 3d658f8c 00000002 c140df0e c0ee3e20 [ 9.780564] 1e80: eefc9cb8 eefc9c40 c1204c40 eefc9cf8 eefc9c54 eefc9cd8 eefc9cb8 00000003 [ 9.789112] 1ea0: ffffffff c0394f78 eefc9cf8 3d194bed 7fffffff 2ddc5000 3d658f8c 00000002 [ 9.797666] 1ec0: 3d658f8c 00000002 00000000 eefcfec0 ee003e40 c1302880 ee025bc0 00000013 [ 9.806215] 1ee0: fa213000 c140dee8 c130250c c09dd498 eefcfec0 c0387d70 c12054cc 00000000 [ 9.814768] 1f00: 00000000 00000001 ee008000 c0383a84 c12054cc c0383d34 c1302880 c1340078 [ 9.823316] 1f20: fa21200c c1301f50 fa212000 c0301798 c0308740 a0000013 ffffffff c1301f84 [ 9.831866] 1f40: c12075c0 c1302504 c140dee8 c030c494 00000001 00000000 ea000013 f0880000 [ 9.840416] 1f60: c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c [ 9.848970] 1f80: 60000013 c1301fa0 c032af10 c0308740 a0000013 ffffffff 00000051 c030873c [ 9.857519] 1fa0: c1300000 c0378200 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 9.866074] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a3a30 c14105d4 c1302480 [ 9.874622] 1fe0: c11a3a2c c1307c4c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 9.883174] [<c038dff8>] (cpu_needs_another_gp) from [<c12082c0>] (0xc12082c0) [ 9.890727] Code: e3520000 0a000001 e3a00001 e12fff1e (e591c028) [ 9.897102] ---[ end trace 3c97ffe0da10b82a ]--- [ 9.901926] Kernel panic - not syncing: Fatal exception in interrupt [ 10.885514] SMP: failed to stop secondary CPUs [ 10.890159] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:54]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:56]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.657152] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667710] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674187] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679609] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.688072] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699936] mmc2: switch to bus width 8 failed [ 1.704488] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.711110] mmc2: switch to bus width 4 failed [ 1.715619] mmc2: new high speed MMC card at address 0001 [ 1.715957] hub 3-0:1.0: USB hub found [ 1.716009] hub 3-0:1.0: 1 port detected [ 1.729861] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.730859] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.730862] [drm] No driver support for vblank timestamp query. [ 1.750530] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.757243] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.764605] mmcblk2: p3 [ 1.786697] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.794670] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.797555] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.804880] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.823995] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.825996] Console: switching to colour frame buffer device 170x48 [ 1.828313] mmc0: new SDIO card at address 0001 [ 1.881644] drm drm: fb0: frame buffer device [ 1.898632] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.905441] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.912511] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.926651] vdd_1v5: disabling [ 1.929727] vdd_1v2: disabling [ 2.608204] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.619668] Waiting for root device /dev/mmcblk0p3... [ 58.537446] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:52]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.660521] Bluetooth: RFCOMM ver 1.11 [ 1.664405] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.669798] Bluetooth: BNEP socket layer initialized [ 1.674788] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.680745] Bluetooth: HIDP socket layer initialized [ 1.686324] Key type dns_resolver registered [ 1.691854] Registering SWP/SWPB emulation handler [ 1.707619] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.714424] VDDIO_HDMI: supplied by vdd_5v0 [ 1.718879] vdd_sys: supplied by vdd_5v0 [ 1.722953] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.727915] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.734517] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.745059] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.751519] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.757568] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.765563] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.781588] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.789996] hub 3-0:1.0: USB hub found [ 1.793826] hub 3-0:1.0: 1 port detected [ 1.805351] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.811974] [drm] No driver support for vblank timestamp query. [ 1.915709] Console: switching to colour frame buffer device 170x48 [ 1.935487] drm drm: fb0: frame buffer device [ 1.961576] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.968877] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.976576] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.997056] vdd_1v5: disabling [ 2.000127] vdd_1v2: disabling [ 2.003327] ALSA device list: [ 2.006300] #0: NVIDIA Tegra Seaboard [ 2.332533] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.343807] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.917114] ledtrig-cpu: registered to indicate activity on CPUs [ 1.923583] usbcore: registered new interface driver usbhid [ 1.929168] usbhid: USB HID core driver [ 1.938629] NET: Registered protocol family 10 [ 1.944152] sit: IPv6 over IPv4 tunneling driver [ 1.949493] NET: Registered protocol family 17 [ 1.953979] can: controller area network core (rev 20120528 abi 9) [ 1.960235] NET: Registered protocol family 29 [ 1.964691] can: raw protocol (rev 20120528) [ 1.968994] can: broadcast manager protocol (rev 20120528 t) [ 1.974670] can: netlink gateway (rev 20130117) max_hops=1 [ 1.980743] Key type dns_resolver registered [ 1.985229] ThumbEE CPU extension supported. [ 1.989532] Registering SWP/SWPB emulation handler [ 2.000366] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.007232] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.016479] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.023498] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.030517] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.037506] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.051330] db8500-esram12: disabling [ 2.055114] db8500-esram34: disabling [ 2.059143] V-CSI/DSI: disabling [ 2.062438] mmci-reg: disabling [ 2.066192] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.072174] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.078613] Waiting for root device /dev/mmcblk0p4... [ 2.118835] mmc3: new high speed MMC card at address 0001 [ 2.124847] mmcblk3: mmc3:0001 3.53 GiB [ 2.129089] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.134765] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.140380] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.146881] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:06]: got exception: timeout ~$off
[PYBOOT] [snowball 02:07]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.730865] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.740875] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.751586] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.775024] NET: Registered protocol family 10 [ 2.780639] sit: IPv6 over IPv4 tunneling driver [ 2.786834] NET: Registered protocol family 17 [ 2.791442] NET: Registered protocol family 35 [ 2.796020] NET: Registered protocol family 37 [ 2.800872] Registering SWP/SWPB emulation handler [ 2.807250] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.813568] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.820220] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.830078] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-23 16:18:59 UTC (956506739) [ 2.839294] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.846343] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.853363] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.860382] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.873901] db8500-esram12: disabling [ 2.877685] db8500-esram34: disabling [ 2.881652] V-CSI/DSI: disabling [ 2.884918] mmci-reg: disabling [ 2.888244] ALSA device list: [ 2.891235] #0: MOP500-card [ 2.894592] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.900634] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.906829] Waiting for root device /dev/mmcblk0p4... [ 67.480194] random: nonblocking pool is initialized cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:53]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter