Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.4.14-786-gcf6c325/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:31.80 bbb arm-omap2plus_defconfig : FAILED 1:53.71 bbb arm-multi_v7_defconfig : FAILED 1:53.52 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:05.42 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.36 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.75 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:50.92 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:51.22 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.99 minnowmax minnowmax_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:48.47 seaboard arm-multi_v7_defconfig : FAILED 2:18.30 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:56.32 snowball arm-u8500_defconfig : FAILED 1:57.19 snowball arm-multi_v7_defconfig : FAILED 2:31.75 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.63

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:10.09 arndale arm-exynos_defconfig : warnings 1:31.85 arndale arm-multi_v7_defconfig : passed 1:21.19 arndale arm-multi_lpae_defconfig : passed 1:20.76 beaver arm-tegra_defconfig : passed 1:35.58 beaver arm-multi_v7_defconfig : passed 1:43.20 capri arm-bcm_defconfig : passed 0:47.40 capri arm-multi_v7_defconfig : passed 1:11.46 capri arm-multi_v7_nosmp_defconfig : warnings 0:48.36 chitra powerpc-ppc64_defconfig : passed 3:39.85 colombus arm-sunxi_defconfig : passed 2:20.13 colombus arm-multi_lpae_defconfig : passed 2:42.37 cosmic arm-imx_v6_v7_defconfig : passed 3:15.87 cosmic arm-multi_v7_defconfig : passed 2:58.21 cosmic arm-multi_v7_nosmp_defconfig : passed 2:40.60 cubie arm-sunxi_defconfig : passed 0:56.41 cubie arm-multi_v7_defconfig : passed 0:59.47 cubie arm-multi_v7_nosmp_defconfig : passed 1:07.46 cubie2 arm-sunxi_defconfig : passed 0:48.92 cubie2 arm-multi_v7_defconfig : passed 1:00.49 cubie2 arm-multi_lpae_defconfig : passed 2:01.34 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:05.12 cubox arm-multi_v7_defconfig : passed 1:02.62 cubox arm-mvebu_v7_defconfig : passed 1:47.30 cubox arm-multi_v7_nosmp_defconfig : passed 1:13.42 jetsontk1 arm-tegra_defconfig : passed 1:31.56 jetsontk1 arm-multi_v7_defconfig : passed 1:35.86 jetsontk1 arm-multi_lpae_defconfig : passed 1:44.44 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:32.80 odroidu3 arm-exynos_defconfig : passed 1:51.95 omap5uevm arm-omap2plus_defconfig : passed 1:06.61 omap5uevm arm-multi_v7_defconfig : passed 1:17.69 omap5uevm arm-multi_lpae_defconfig : passed 1:15.19 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:34.53 pandaes arm-omap2plus_defconfig : warnings 1:42.15 pandaes arm-multi_v7_defconfig : passed 1:42.78 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:58.52 pi arm-multi_v7_defconfig : passed 1:33.16 pi arm-multi_lpae_defconfig : passed 2:00.46 pi arm-multi_v7_nosmp_defconfig : warnings 1:25.45 pit arm-exynos_defconfig : passed 1:57.75 pit arm-multi_v7_defconfig : passed 1:30.66 pit arm-multi_lpae_defconfig : passed 1:52.66 pit arm-multi_v7_nosmp_defconfig : warnings 1:35.05 seattle arm64-defconfig : passed 2:35.45 snow arm-exynos_defconfig : passed 1:15.71 snow arm-multi_v7_defconfig : passed 1:13.11 snow arm-multi_lpae_defconfig : passed 1:08.98 snow arm-multi_v7_nosmp_defconfig : warnings 1:58.28 trimslice arm-tegra_defconfig : passed 1:33.93 trimslice arm-multi_v7_defconfig : passed 2:44.20 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:42.52 wandboard arm-imx_v6_v7_defconfig : passed 1:16.66 wandboard arm-multi_v7_defconfig : passed 1:11.24 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:25.98

Offline boards:

beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:23.17 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.09 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 3:15.24 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:24.89 colombus arm-multi_v7_defconfig : OFFLINE 0:52.02 dalmore arm-tegra_defconfig : OFFLINE 2:18.62 dalmore arm-multi_v7_defconfig : OFFLINE 2:24.62 dalmore arm-multi_lpae_defconfig : OFFLINE 2:30.21 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.90 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:27.48 hummingboard arm-multi_v7_defconfig : OFFLINE 2:19.37 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.15 parallella arm-multi_v7_defconfig : OFFLINE 2:34.45 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.20 pi arm-exynos_defconfig : OFFLINE 1:53.61 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:01.75 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:48.10 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:49.79 sama5 arm-sama5_defconfig : OFFLINE 2:18.39 sama5d3-xplained arm-sama5_defconfig : OFFLINE 3:10.50 socfpga arm-socfpga_defconfig : OFFLINE 2:29.00 socfpga arm-multi_v7_defconfig : OFFLINE 2:28.18 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:11.92

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.244444] MAIN_DC: disabling [ 2.246020] hdmi-en: disabling [ 2.249431] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.256406] Unable to handle kernel paging request at virtual address c0f24c20 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.19-rt27-00786-gcf6c325 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Wed Sep 14 02:25:58 PDT 2016 [ 2.278221] [c0f24c20] *pgd=40e0040e(bad) [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 2.296102] Modules linked in: [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c0f66604, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /work/build/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x130() [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.19-rt27-00786-gcf6c325 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c021768c>] (unwind_backtrace) from [<c0214204>] (show_stack+0x10/0x14) [ 0.000000] [<c0214204>] (show_stack) from [<c02406e4>] (warn_slowpath_common+0x80/0xac) [ 0.000000] [<c02406e4>] (warn_slowpath_common) from [<c0240740>] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [<c0240740>] (warn_slowpath_fmt) from [<c0d8a060>] (arm_dt_init_cpu_maps+0xf8/0x130) [ 0.000000] [<c0d8a060>] (arm_dt_init_cpu_maps) from [<c0d89378>] (setup_arch+0x710/0x848) [ 0.000000] [<c0d89378>] (setup_arch) from [<c0d86960>] (start_kernel+0x94/0x398) [ 0.000000] [<c0d86960>] (start_kernel) from [<40208078>] (0x40208078)

[PYBOOT] [arndale 02:28]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:29]: got exception: timeout ~$off

[PYBOOT] [arndale 02:30]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.529576] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.596271] Synopsys Designware Multimedia Card Interface Driver [ 1.604031] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.613663] ledtrig-cpu: registered to indicate activity on CPUs [ 1.620497] usbcore: registered new interface driver usbhid [ 1.626390] usbhid: USB HID core driver [ 1.637070] NET: Registered protocol family 10 [ 1.643570] sit: IPv6 over IPv4 tunneling driver [ 1.649723] NET: Registered protocol family 17 [ 1.654491] can: controller area network core (rev 20120528 abi 9) [ 1.661137] NET: Registered protocol family 29 [ 1.665861] can: raw protocol (rev 20120528) [ 1.670381] can: broadcast manager protocol (rev 20120528 t) [ 1.676371] can: netlink gateway (rev 20130117) max_hops=1 [ 1.683029] Key type dns_resolver registered [ 1.687916] omap_voltage_late_init: Voltage driver support not added [ 1.696057] ThumbEE CPU extension supported. [ 1.700668] Registering SWP/SWPB emulation handler [ 1.714606] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.722343] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.730804] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.738447] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.746031] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.753603] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.760918] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.769091] hctosys: unable to open rtc device (rtc0) [ 1.782696] Waiting for root device /dev/mmcblk1p2... [ 1.818238] mmc1: MAN_BKOPS_EN bit is not set [ 1.824755] mmc1: new high speed MMC card at address 0001 [ 1.831439] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.836655] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.843268] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.851793] mmcblk0: p1 p2

[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:51]: got exception: timeout ~$off

[PYBOOT] [bbb 01:52]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.350990] sdhci: Copyright(c) Pierre Ossman [ 1.356788] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.419588] Synopsys Designware Multimedia Card Interface Driver [ 1.427115] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436233] ledtrig-cpu: registered to indicate activity on CPUs [ 1.442964] usbcore: registered new interface driver usbhid [ 1.448842] usbhid: USB HID core driver [ 1.458203] NET: Registered protocol family 10 [ 1.464721] sit: IPv6 over IPv4 tunneling driver [ 1.470639] NET: Registered protocol family 17 [ 1.475372] can: controller area network core (rev 20120528 abi 9) [ 1.481967] NET: Registered protocol family 29 [ 1.486662] can: raw protocol (rev 20120528) [ 1.491172] can: broadcast manager protocol (rev 20120528 t) [ 1.497150] can: netlink gateway (rev 20130117) max_hops=1 [ 1.503765] Key type dns_resolver registered [ 1.508618] omap_voltage_late_init: Voltage driver support not added [ 1.516390] ThumbEE CPU extension supported. [ 1.528787] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536342] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.544111] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.551639] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.559144] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.566622] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.573896] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.581492] hctosys: unable to open rtc device (rtc0) [ 1.592375] Waiting for root device /dev/mmcblk1p2... [ 1.626694] mmc1: MAN_BKOPS_EN bit is not set [ 1.633079] mmc1: new high speed MMC card at address 0001 [ 1.639521] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.644580] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.651058] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.659314] mmcblk0: p1 p2

[PYBOOT] [bbb 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:03]: got exception: timeout ~$off

[PYBOOT] [bbb 02:04]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.050022] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.056372] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.063268] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.072893] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.082420] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.089458] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.132832] ledtrig-cpu: registered to indicate activity on CPUs [ 2.140982] oprofile: using arm/armv7 [ 2.146119] Initializing XFRM netlink socket [ 2.151252] NET: Registered protocol family 10 [ 2.161579] sit: IPv6 over IPv4 tunneling driver [ 2.170282] NET: Registered protocol family 17 [ 2.175218] NET: Registered protocol family 15 [ 2.180505] Key type dns_resolver registered [ 2.185454] omap_voltage_late_init: Voltage driver support not added [ 2.192215] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.200705] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.210931] ThumbEE CPU extension supported. [ 2.215590] Registering SWP/SWPB emulation handler [ 2.220634] SmartReflex Class3 initialized [ 2.288097] mmc1: MAN_BKOPS_EN bit is not set [ 2.298116] mmc1: new high speed MMC card at address 0001 [ 2.310422] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.322369] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.329556] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.336753] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.345727] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.359001] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.369441] mmcblk0: p1 p2 [ 2.375143] hctosys: unable to open rtc device (rtc0) [ 2.380467] sr_init: No PMIC hook to init smartreflex [ 2.386265] sr_init: platform driver register failed for SR [ 2.441188] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.586155] NET: Registered protocol family 10 [ 1.591431] sit: IPv6 over IPv4 tunneling driver [ 1.596728] NET: Registered protocol family 17 [ 1.601397] can: controller area network core (rev 20120528 abi 9) [ 1.607904] NET: Registered protocol family 29 [ 1.612554] can: raw protocol (rev 20120528) [ 1.617031] can: broadcast manager protocol (rev 20120528 t) [ 1.622964] can: netlink gateway (rev 20130117) max_hops=1 [ 1.629013] Key type dns_resolver registered [ 1.633580] omap_voltage_late_init: Voltage driver support not added [ 1.640729] Power Management for TI OMAP4+ devices. [ 1.646032] ThumbEE CPU extension supported. [ 1.650531] Registering SWP/SWPB emulation handler [ 1.657365] palmas 0-0058: Irq flag is 0x00000008 [ 1.681818] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.712868] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.726943] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750158] rtc-ds1307 2-006f: SET TIME! [ 1.755905] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762665] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767277] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776103] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.810662] vdd_3v3: supplied by regen1 [ 1.851538] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.868886] aic_dvdd_fixed: disabling [ 1.872909] ldousb: disabling [ 1.876953] Waiting for root device /dev/mmcblk1p1... [ 1.896555] mmc1: MAN_BKOPS_EN bit is not set [ 1.908585] mmc1: new high speed MMC card at address 0001 [ 1.914581] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.919469] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.925825] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.932691] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:47]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.566122] NET: Registered protocol family 10 [ 1.571394] sit: IPv6 over IPv4 tunneling driver [ 1.576688] NET: Registered protocol family 17 [ 1.581351] can: controller area network core (rev 20120528 abi 9) [ 1.587860] NET: Registered protocol family 29 [ 1.592516] can: raw protocol (rev 20120528) [ 1.596988] can: broadcast manager protocol (rev 20120528 t) [ 1.602914] can: netlink gateway (rev 20130117) max_hops=1 [ 1.608957] Key type dns_resolver registered [ 1.613517] omap_voltage_late_init: Voltage driver support not added [ 1.620654] Power Management for TI OMAP4+ devices. [ 1.625957] ThumbEE CPU extension supported. [ 1.630454] Registering SWP/SWPB emulation handler [ 1.637355] palmas 0-0058: Irq flag is 0x00000008 [ 1.661851] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.692700] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.706788] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.730204] rtc-ds1307 2-006f: SET TIME! [ 1.735941] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.742695] rtc-ds1307 2-006f: 64 bytes nvram [ 1.747307] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.756141] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.790710] vdd_3v3: supplied by regen1 [ 1.831624] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.849004] aic_dvdd_fixed: disabling [ 1.853019] ldousb: disabling [ 1.857037] Waiting for root device /dev/mmcblk1p1... [ 1.876626] mmc1: MAN_BKOPS_EN bit is not set [ 1.888682] mmc1: new high speed MMC card at address 0001 [ 1.894667] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.899561] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.905929] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.912777] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.457163] NET: Registered protocol family 10 [ 1.462413] sit: IPv6 over IPv4 tunneling driver [ 1.467587] NET: Registered protocol family 17 [ 1.472250] can: controller area network core (rev 20120528 abi 9) [ 1.478748] NET: Registered protocol family 29 [ 1.483395] can: raw protocol (rev 20120528) [ 1.487864] can: broadcast manager protocol (rev 20120528 t) [ 1.493792] can: netlink gateway (rev 20130117) max_hops=1 [ 1.499757] Key type dns_resolver registered [ 1.504308] omap_voltage_late_init: Voltage driver support not added [ 1.511235] Power Management for TI OMAP4+ devices. [ 1.516496] ThumbEE CPU extension supported. [ 1.521081] ata1: SATA link down (SStatus 0 SControl 300) [ 1.528028] palmas 0-0058: Irq flag is 0x00000008 [ 1.552740] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.580880] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.594165] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.616312] rtc-ds1307 2-006f: SET TIME! [ 1.621928] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.628630] rtc-ds1307 2-006f: 64 bytes nvram [ 1.633208] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.641018] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.676535] vdd_3v3: supplied by regen1 [ 1.711657] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.724064] aic_dvdd_fixed: disabling [ 1.728061] ldousb: disabling [ 1.731851] Waiting for root device /dev/mmcblk1p1... [ 1.770427] mmc1: MAN_BKOPS_EN bit is not set [ 1.782417] mmc1: new high speed MMC card at address 0001 [ 1.788288] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.793121] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.799408] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.806152] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:50]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.188503] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.198879] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.203740] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.210038] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.216902] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.226499] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.236009] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.243061] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283429] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289734] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296605] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306203] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315722] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322764] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.328876] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335187] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342070] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351701] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361209] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368288] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375142] vdd_3v3: supplied by regen1 [ 2.413734] hctosys: unable to open rtc device (rtc0) [ 2.419043] sr_init: No PMIC hook to init smartreflex [ 2.424600] sr_init: platform driver register failed for SR [ 2.467726] mmc1: MAN_BKOPS_EN bit is not set [ 2.477045] aic_dvdd_fixed: disabling [ 2.481256] ldousb: disabling [ 2.484489] mmc1: new high speed MMC card at address 0001 [ 2.492399] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.497951] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.504783] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.513194] mmcblk0: p1 [ 2.520460] Waiting for root device /dev/mmcblk1p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.752636] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.766963] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 83.385131] random: dd: uninitialized urandom read (512 bytes read, 55 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 87.716282] eth0: device MAC address 2e:9b:e4:6d:a2:ac [ 87.866768] RX IPC Checksum Offload disabled [ 87.871406] No MAC Management Counters available Listening on LPF/eth0/2e:9b:e4:6d:a2:ac Sending on LPF/eth0/2e:9b:e4:6d:a2:ac Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.678434] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.684820] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.695044] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.701507] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.706918] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.714683] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.728644] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.735373] hub 3-0:1.0: USB hub found [ 1.739186] hub 3-0:1.0: 1 port detected [ 1.747084] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.753725] [drm] No driver support for vblank timestamp query. [ 1.781707] mmc2: switch to bus width 2 failed [ 1.786527] mmc2: switch to bus width 1 failed [ 1.791026] mmc2: new high speed MMC card at address 0001 [ 1.797404] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.802328] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.808361] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.809697] mmcblk0: p3 [ 1.870381] Console: switching to colour frame buffer device 170x48 [ 1.873761] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.881900] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.892593] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.915463] drm drm: fb0: frame buffer device [ 1.925773] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.933663] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.940344] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.947341] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.961315] vdd_1v5: disabling [ 1.964404] vdd_1v2: disabling [ 1.977537] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.987438] mmc0: new SDIO card at address 0001 [ 2.547834] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.558958] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 02:14]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 02:15]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:16]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.645000] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.651378] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.661721] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.668186] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.673599] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.681337] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.693591] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.700133] hub 3-0:1.0: USB hub found [ 1.703907] hub 3-0:1.0: 1 port detected [ 1.711120] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.717734] [drm] No driver support for vblank timestamp query. [ 1.802801] mmc2: switch to bus width 2 failed [ 1.803024] mmc2: switch to bus width 1 failed [ 1.803035] mmc2: new high speed MMC card at address 0001 [ 1.803339] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.803448] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.803554] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.805587] mmcblk0: p3 [ 1.836851] Console: switching to colour frame buffer device 170x48 [ 1.891794] drm drm: fb0: frame buffer device [ 1.896254] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.902675] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.909573] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.921478] vdd_1v5: disabling [ 1.924551] vdd_1v2: disabling [ 1.944729] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.958332] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.966677] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.979458] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.004006] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.023255] mmc0: new SDIO card at address 0001 [ 2.509391] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.520504] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:55]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.757663] Key type dns_resolver registered [ 1.762001] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.763595] Registering SWP/SWPB emulation handler [ 1.775624] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.786015] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.792954] VDDIO_HDMI: supplied by vdd_5v0 [ 1.797497] vdd_sys: supplied by vdd_5v0 [ 1.801614] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.806644] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.813391] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.821253] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.824982] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.825021] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.825119] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.827474] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.841579] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.853465] hub 3-0:1.0: USB hub found [ 1.853556] hub 3-0:1.0: 1 port detected [ 1.864326] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.864329] [drm] No driver support for vblank timestamp query. [ 1.901511] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.909148] mmc0: new SDIO card at address 0001 [ 1.946919] Console: switching to colour frame buffer device 170x48 [ 1.986449] drm drm: fb0: frame buffer device [ 2.011571] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.018723] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.026265] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.045646] vdd_1v5: disabling [ 2.048715] vdd_1v2: disabling [ 2.051896] ALSA device list: [ 2.054854] #0: NVIDIA Tegra Seaboard [ 2.384379] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.395772] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:46]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:47]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.983093] can: controller area network core (rev 20120528 abi 9) [ 1.989349] NET: Registered protocol family 29 [ 1.993804] can: raw protocol (rev 20120528) [ 1.998077] can: broadcast manager protocol (rev 20120528 t) [ 2.003753] can: netlink gateway (rev 20130117) max_hops=1 [ 2.009735] Key type dns_resolver registered [ 2.014190] ThumbEE CPU extension supported. [ 2.018493] Registering SWP/SWPB emulation handler [ 2.025756] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.032562] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.041717] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.048736] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.055725] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.062713] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.076232] db8500-esram12: disabling [ 2.080047] db8500-esram34: disabling [ 2.083984] V-CSI/DSI: disabling [ 2.087280] mmci-reg: disabling [ 2.090942] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.096923] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.103179] Waiting for root device /dev/mmcblk3p4... [ 3.937194] mmc3: new high speed MMC card at address 0001 [ 3.943359] mmcblk0: mmc3:0001 3.53 GiB [ 3.947845] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 3.953643] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 3.959411] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 3.966156] mmcblk0: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:28]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:29]: got exception: timeout ~$off

[PYBOOT] [snowball 02:30]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.900817] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.908691] ledtrig-cpu: registered to indicate activity on CPUs [ 1.914947] usbcore: registered new interface driver usbhid [ 1.920532] usbhid: USB HID core driver [ 1.928314] NET: Registered protocol family 10 [ 1.986999] sit: IPv6 over IPv4 tunneling driver [ 1.992156] NET: Registered protocol family 17 [ 1.996612] can: controller area network core (rev 20120528 abi 9) [ 2.002868] NET: Registered protocol family 29 [ 2.007324] can: raw protocol (rev 20120528) [ 2.011596] can: broadcast manager protocol (rev 20120528 t) [ 2.017242] can: netlink gateway (rev 20130117) max_hops=1 [ 2.023162] Key type dns_resolver registered [ 2.027648] ThumbEE CPU extension supported. [ 2.083129] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.096801] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.105895] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.112884] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.119873] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.126861] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.138763] db8500-esram12: disabling [ 2.186553] db8500-esram34: disabling [ 2.208312] V-CSI/DSI: disabling [ 2.216552] mmci-reg: disabling [ 2.220153] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.226135] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.247314] Waiting for root device /dev/mmcblk3p4... [ 4.117126] mmc3: new high speed MMC card at address 0001 [ 4.123229] mmcblk0: mmc3:0001 3.53 GiB [ 4.127593] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 4.133239] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 4.138885] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 4.145416] mmcblk0: p1 p2 p3 p4

[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:57]: got exception: timeout ~$off

[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.446716] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.452789] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.465270] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.475982] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.485900] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.496582] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.519714] NET: Registered protocol family 10 [ 2.524902] sit: IPv6 over IPv4 tunneling driver [ 2.530212] NET: Registered protocol family 17 [ 2.534667] NET: Registered protocol family 35 [ 2.539245] NET: Registered protocol family 37 [ 2.543823] Registering SWP/SWPB emulation handler [ 2.550598] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.562530] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-08-26 06:24:47 UTC (967271087) [ 2.571716] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.578765] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.585754] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.592742] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.606414] db8500-esram12: disabling [ 2.610168] db8500-esram34: disabling [ 2.614074] V-CSI/DSI: disabling [ 2.617492] mmci-reg: disabling [ 2.620788] ALSA device list: [ 2.623748] #0: MOP500-card [ 2.627227] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.633178] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.639434] Waiting for root device /dev/mmcblk3p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:55]: got exception: timeout ~$off

[PYBOOT] [snowball 01:56]: Done.