queue boot: 16 pass, 7 fail (v3.10.36) - Kernel-build-reports

4 Apr 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.10.36
Failed boot tests (console logs at the end)
===========================================
             omap3-beagle-xm:     DEAD:    omap2plus_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    imx_v6_v7_defconfig
  imx6dl-wandboard,wand-solo:  OFFLINE:    imx_v6_v7_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    multi_v7_defconfig
          armada-370-mirabox:     DEAD:    multi_v7_defconfig
        sun4i-a10-cubieboard:     FAIL:    multi_v7_defconfig
                   da850-evm:     FAIL:    davinci_all_defconfig
Full Report
===========
da8xx_omapl_defconfig
---------------------
                   da850-evm     0 min 14.5 sec:     PASS
             legacy,da850evm     0 min 13.9 sec:     PASS
omap2plus_defconfig
-------------------
               legacy,3730xm     0 min 55.0 sec:     PASS
             omap3-beagle-xm     0 min  0.0 sec:     DEAD
           legacy,3530beagle     0 min 57.6 sec:     PASS
                 omap4-panda     1 min  9.3 sec:     PASS
                  omap3-tobi     0 min 33.6 sec:     PASS
                 am335x-bone     0 min 26.6 sec:     PASS
              omap4-panda-es     1 min  3.7 sec:     PASS
            legacy,3730storm     0 min 23.4 sec:     PASS
            legacy,3530overo     0 min 21.2 sec:     PASS
tegra_defconfig
---------------
              tegra30-beaver     0 min 17.2 sec:     PASS
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     0 min 42.3 sec:     FAIL
  imx6dl-wandboard,wand-solo     0 min 31.4 sec:  OFFLINE
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     0 min 21.4 sec:     PASS
          armada-370-mirabox     0 min 19.6 sec:     PASS
exynos_defconfig
----------------
          exynos5250-arndale     0 min 28.9 sec:     PASS
multi_v7_defconfig
------------------
  armada-xp-openblocks-ax3-4     0 min 21.2 sec:     FAIL
          armada-370-mirabox     0 min  0.0 sec:     DEAD
        sun4i-a10-cubieboard     1 min 45.0 sec:     FAIL
sama5_defconfig
---------------
                  sama5d35ek     0 min 17.0 sec:     PASS
davinci_all_defconfig
---------------------
             legacy,dm365evm     0 min 16.4 sec:     PASS
                   da850-evm     0 min 40.8 sec:     FAIL
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap3-beagle-xm: DEAD: last 80 lines of boot log:
    -------------------------------------------------
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment
In:    serial
Out:   serial
Err:   serial
Beagle xM Rev C
No EEPROM on expansion board
Die ID #0b5000029ff80000016842c910019004
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 1.800 
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 480ab000 using PIO, IRQ 0
Net:   usb_ether
Hit any key to stop autoboot:  
3  0 
OMAP3 beagleboard.org # 
OMAP3 beagleboard.org # version
version
U-Boot 2013.04 (Jan 17 2014 - 10:48:29)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3
GNU ld (GNU Binutils for Ubuntu) 2.23.2
OMAP3 beagleboard.org #setenv usbethaddr 2a:45:34:6d:b4:5d
 setenv usbethaddr 2a:45:34:6d:b4:5d
OMAP3 beagleboard.org # setenv preboot "dcache off; usb start"  # For USB net
setenv preboot "dcache off; usb start"  # For USB net
OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
OMAP3 beagleboard.org # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
OMAP3 beagleboard.org #if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
OMAP3 beagleboard.org #dhcp
 dhcp
ERROR: Need valid 'usbnet_devaddr' to be set
at ether.c:2369/usb_eth_init()
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.190
OMAP3 beagleboard.org # setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
OMAP3 beagleboard.org #if test -n ${netargs}; then run netargs; fi
 if test -n ${netargs}; then run netargs; fi
OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-M1ksw2/zImage
tftp 0x80200000 192.168.1.2:tmp/3730xm-M1ksw2/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'tmp/3730xm-M1ksw2/zImage'.
Load address: 0x80200000
Loading: *T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ##############
     461.9 KiB/s
done
Bytes transferred = 4022136 (3d5f78 hex)
OMAP3 beagleboard.org #tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
 tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
=> version
version
U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254'
=>if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=>setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
=>dhcp
 dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.156
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=>if test -n ${netargs}; then run netargs; fi
 if test -n ${netargs}; then run netargs; fi
=> tftp 0x18000000 192.168.1.2:tmp/wand-dual-ePRDWn/zImage
tftp 0x18000000 192.168.1.2:tmp/wand-dual-ePRDWn/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-ePRDWn/zImage'.
Load address: 0x18000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###########################
     1.5 MiB/s
done
Bytes transferred = 4207992 (403578 hex)
=> tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x20000000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x1f000000 192.168.1.2:tmp/wand-dual-ePRDWn/imx6dl-wandboard.dtb
tftp 0x1f000000 192.168.1.2:tmp/wand-dual-ePRDWn/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-ePRDWn/imx6dl-wandboard.dtb'.
Load address: 0x1f000000
Loading: *##
     1.4 MiB/s
done
Bytes transferred = 18975 (4a1f hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
=>bootz 0x18000000 0x20000000 0x1f000000
 bootz 0x18000000 0x20000000 0x1f000000
## Loading init Ramdisk from Legacy Image at 20000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 1f000000
   Booting using the fdt blob at 0x1f000000
   Using Device Tree in place at 1f000000, end 1f007a1e
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.28 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: OFFLINE: last 80 lines of boot log:
    ---------------------------------------------------------------
Connected to wand-solo console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(wand-solo console)> hardreset
(user:khilman) Reboot wand-solo
Reboot: wand-solo ; phidget 2 2 :  off, sleep, on
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
CPU:   Freescale i.MX6SOLO rev1.1 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  512 MiB
WARNING: Caches not enabled
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default env  0 
=> ~$off
# PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE')
# PYBOOT: Time: 31.37 seconds.
# PYBOOT: Result: OFFLINE
multi_v7_defconfig
------------------
armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
PTP clock support registered
EDAC MC: Ver: 3.0.0
Switching to clocksource armada_370_xp_clocksource
bounce pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
armada-xp-pinctrl d0018000.pinctrl: registered pinctrl driver
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2>
Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3>
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9>
Trying to free nonexistent resource <0000000000000caa-0000000000000caa>
Trying to free nonexistent resource <0000000000000cab-0000000000000cab>
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <00000000000000e4-00000000000000e4>
Trying to free nonexistent resource <00000000000000e5-00000000000000e5>
Trying to free nonexistent resource <00000000000000e6-00000000000000e6>
ipmi_si: Unable to find any System Interface(s)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 17) is a 16550A
console [ttyS0] enabled
d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 18) is a 16550A
sata_mv d00a0000.sata: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 24
ata2: SATA max UDMA/133 irq 24
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
Registering SWP/SWPB emulation handler
/home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata1: SATA link down (SStatus 0 SControl F300)
ata2: SATA link down (SStatus 0 SControl F300)
List of all partitions:
No filesystem could mount root, tried: 
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.36 #1
[<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14)
[<c00114b0>] (show_stack+0x10/0x14) from [<c0276480>] (panic+0xa0/0x1e8)
[<c0276480>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298)
[<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184)
[<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8)
[<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02721dc>] (kernel_init+0x8/0x158)
[<c02721dc>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c)
CPU0: stopping
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.36 #1
[<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14)
[<c00114b0>] (show_stack+0x10/0x14) from [<c001238c>] (handle_IPI+0x108/0x130)
[<c001238c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8)
[<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50)
Exception stack(0xc0359f70 to 0xc0359fb8)
9f60:                                     c1d5c6d8 00000000 000000ba 000000ba
9f80: c03604a8 c0358000 c036045c c0383c6c c027deb0 c0358000 c0383c6c c0358000
9fa0: 0000001f c0359fb8 c000f070 c004fa8c 60000113 ffffffff
[<c000dac0>] (__irq_svc+0x40/0x50) from [<c004fa8c>] (cpu_startup_entry+0xfc/0x140)
[<c004fa8c>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0)
[<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074)
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic
# PYBOOT: Time: 21.22 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: DEAD: last 80 lines of boot log:
    ----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 :  off, sleep, on
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log:
    ------------------------------------------------------
pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc0327ac0   (3199 kB)
      .init : 0xc0328000 - 0xc0356780   ( 186 kB)
      .data : 0xc0358000 - 0xc0383d20   ( 176 kB)
       .bss : 0xc0383d20 - 0xc03b68ac   ( 203 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Console: colour dummy device 80x30
Calibrating delay loop... 669.28 BogoMIPS (lpj=3346432)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket -1, mpidr 0
Setting up static identity map for 0xc027be58 - 0xc027beb0
unable to find compatible sirf rstc node in dtb
Brought up 1 CPUs
SMP: Total of 1 processors activated (669.28 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
unable to find compatible sirf pwrc node in dtb
Serial: AMBA PL011 UART driver
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
PTP clock support registered
EDAC MC: Ver: 3.0.0
bounce pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2>
Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3>
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9>
Trying to free nonexistent resource <0000000000000caa-0000000000000caa>
Trying to free nonexistent resource <0000000000000cab-0000000000000cab>
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <00000000000000e4-00000000000000e4>
Trying to free nonexistent resource <00000000000000e5-00000000000000e5>
Trying to free nonexistent resource <00000000000000e6-00000000000000e6>
ipmi_si: Unable to find any System Interface(s)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A
console [ttyS0] enabled
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Registering SWP/SWPB emulation handler
/home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting for root device /dev/mmcblk0p2...
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'>
# PYBOOT: Time: 104.96 seconds.
# PYBOOT: Result: FAIL
davinci_all_defconfig
---------------------
da850-evm: FAIL: last 80 lines of boot log:
    -------------------------------------------
Starting SPI Memory Copy...
Valid magicnum, 0x55424CBB, found at offset 0x00010000.
   DONE
Jumping to entry point at 0xC1080000.
MMC:   davinci: 0
SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
*** Warning - bad CRC, using default environment
In:    serial
Out:   serial
Err:   serial
SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Net:   DaVinci-EMAC
Hit any key to stop autoboot:
  3  0 
U-Boot > 
U-Boot > version
version
U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3
GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913
U-Boot >setenv bootargs console=ttyS2,115200n8 debug earlyprintk
 setenv bootargs console=ttyS2,115200n8 debug earlyprintk
U-Boot >if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
U-Boot > if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U-Boot > setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot > dhcp
dhcp
BOOTP broadcast 1
DHCP client bound to address 192.168.1.194
U-Boot > setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot > if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-xqp607/zImage-dtb-gNhknO
tftp 0xc0800000 192.168.1.2:tmp/da850evm-xqp607/zImage-dtb-gNhknO
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'tmp/da850evm-xqp607/zImage-dtb-gNhknO'.
Load address: 0xc0800000
Loading: *#################################################################
     #################################################################
     ########
     1.7 MiB/s
done
Bytes transferred = 2023756 (1ee14c hex)
U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0xc0c00000
Loading: *############################################
     1.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot >printenv bootargs
 printenv bootargs
bootargs=console=ttyS2,115200n8 debug earlyprintk
U-Boot > bootz 0xc0800000 0xc0c00000 
bootz 0xc0800000 0xc0c00000 
Kernel image @ 0xc0800000 [ 0x000000 - 0x1ec9f8 ]
## Loading init Ramdisk from Legacy Image at c0c00000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 40.83 seconds.
# PYBOOT: Result: FAIL