Failed boards:
bbb multi_v7_defconfig : FAILED 3:07.20 beaver multi_v7_defconfig : FAILED 2:58.01 capri multi_v7_defconfig : FAILED 2:57.82 cubie multi_v7_defconfig : FAILED 2:55.72 cubie2 sunxi_defconfig : FAILED 1:19.06 cubie2 multi_v7_defconfig : FAILED 3:05.13 cubie2 multi_lpae_defconfig : FAILED 2:53.59 dalmore multi_v7_defconfig : FAILED 3:03.90 dalmore multi_lpae_defconfig : FAILED 3:01.98 hummingboard multi_v7_defconfig : FAILED 1:05.44 omap5uevm multi_v7_defconfig : FAILED 3:51.20 omap5uevm multi_lpae_defconfig : FAILED 3:48.95 panda multi_v7_defconfig : FAILED 1:37.21 seaboard multi_v7_defconfig : FAILED 3:01.89 snowball multi_v7_defconfig : FAILED 1:10.08 trimslice multi_v7_defconfig : FAILED 3:02.87 wandboard multi_v7_defconfig : FAILED 1:04.05
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:20.02 arndale exynos_defconfig : passed 1:01.71 bbb omap2plus_defconfig : passed 1:32.98 beaver tegra_defconfig : passed 0:55.29 capri bcm_defconfig : passed 0:44.94 cubie sunxi_defconfig : passed 0:51.21 dalmore tegra_defconfig : passed 1:22.40 hummingboard imx_v6_v7_defconfig : passed 1:18.17 omap5uevm omap2plus_defconfig : warnings 1:04.92 panda omap2plus_defconfig : passed 1:13.37 sama5 sama5_defconfig : passed 1:47.81 seaboard tegra_defconfig : passed 1:04.26 snow exynos_defconfig : passed 1:30.91 snowball u8500_defconfig : passed 1:39.46 trimslice tegra_defconfig : passed 1:03.70 wandboard imx_v6_v7_defconfig : passed 0:58.21
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.237261] gspca_main: v2.14.0 registered [ 1.243573] sdhci: Secure Digital Host Controller Interface driver [ 1.250103] sdhci: Copyright(c) Pierre Ossman [ 1.255865] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.297335] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.337357] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.344207] usbcore: registered new interface driver usbhid [ 1.350111] usbhid: USB HID core driver [ 1.359171] TCP: cubic registered [ 1.362675] NET: Registered protocol family 17 [ 1.367751] Key type dns_resolver registered [ 1.373179] ThumbEE CPU extension supported. [ 1.377766] Registering SWP/SWPB emulation handler [ 1.382794] PJ4 iWMMXt coprocessor enabled. [ 1.395156] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.450012] mmc1: BKOPS_EN bit is not set [ 1.456683] mmc1: new high speed MMC card at address 0001 [ 1.463136] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.468158] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.474558] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.481525] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.488195] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.495586] libphy: 4a101000.mdio: probed [ 1.499922] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.509688] Detected MACID = bc:6a:29:7a:42:a8 [ 1.515932] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.530083] ALSA device list: [ 1.533222] No soundcards found. [ 1.538152] mmcblk0: p1 p2 [ 1.543973] mmcblk0boot1: unknown partition table [ 1.551034] mmcblk0boot0: unknown partition table [ 1.558194] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.567971] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.627907] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.636488] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.663261] devtmpfs: mounted [ 1.667439] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.742337] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.660176] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.666262] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.674004] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.681117] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.686712] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.693072] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.703059] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.712988] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.719618] [drm] No driver support for vblank timestamp query. [ 3.725588] host1x drm: No connectors reported connected with modes [ 3.731845] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.750270] Console: switching to colour frame buffer device 128x48 [ 3.762198] host1x drm: fb0: frame buffer device [ 3.766906] host1x drm: registered panic notifier [ 3.771603] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.777800] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.785180] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.796530] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.801928] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.809747] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.833070] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.839436] hub 1-0:1.0: USB hub found [ 3.843214] hub 1-0:1.0: 1 port detected [ 3.847548] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852943] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860745] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.883068] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.889359] hub 2-0:1.0: USB hub found [ 3.893136] hub 2-0:1.0: 1 port detected [ 3.900980] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.913709] ALSA device list: [ 3.916675] #0: NVIDIA Tegra Beaver [ 3.922823] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.931743] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.946671] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.954792] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.980954] devtmpfs: mounted [ 3.984400] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 29042 Comm: %s [ 1.050000] Not tainted 3.14.0-11918-ge9f37d3 #1 [ 1.050000] task: c09ab4a4 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07d1af0>] lr : [<c027cfb4>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0b06390 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09ab4a4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process %s [ 1.050000] (pid: 29042, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace 4525eedcc3f938a0 ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.976108] mousedev: PS/2 mouse device common for all mice [ 0.982996] i2c /dev entries driver [ 0.988129] usbcore: registered new interface driver uvcvideo [ 0.993943] USB Video Class driver (1.1.1) [ 0.998035] gspca_main: v2.14.0 registered [ 1.004963] sdhci: Secure Digital Host Controller Interface driver [ 1.011139] sdhci: Copyright(c) Pierre Ossman [ 1.015861] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.021974] usbcore: registered new interface driver usbhid [ 1.027563] usbhid: USB HID core driver [ 1.033998] TCP: cubic registered [ 1.037319] NET: Registered protocol family 17 [ 1.041925] Key type dns_resolver registered [ 1.046353] ThumbEE CPU extension supported. [ 1.050637] Registering SWP/SWPB emulation handler [ 1.055438] PJ4 iWMMXt coprocessor enabled. [ 1.060702] ahci-5v: 5000 mV [ 1.064163] usb1-vbus: 5000 mV [ 1.067667] usb2-vbus: 5000 mV [ 1.071350] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079185] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086842] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100250] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.108132] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432893] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452879] Sending DHCP requests ., OK [ 3.473319] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173 [ 3.481080] IP-Config: Complete: [ 3.484340] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1 [ 3.494345] host=172.16.1.173, domain=lixom.net, nis-domain=(none) [ 3.500950] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507471] nameserver0=172.16.1.1 [ 3.511595] ALSA device list: [ 3.514575] No soundcards found. [ 3.523381] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529648] devtmpfs: mounted [ 3.533231] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 3.557492] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 3.259680] ., OK [ 3.280141] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.287958] IP-Config: Complete: [ 3.291234] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.301233] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.307838] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.314367] nameserver0=172.16.1.1 [ 3.318501] ALSA device list: [ 3.321483] No soundcards found. [ 3.330582] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.336914] devtmpfs: mounted [ 3.340536] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 3.364277] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.371079] Alignment trap: not handling instruction e1923f9f at [<c07d89ac>] [ 3.378207] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.384726] Internal error: : 221 [#2] SMP ARM [ 3.389163] Modules linked in: [ 3.392233] CPU: 0 PID: 29042 Comm: %s [ 3.392233] Not tainted 3.14.0-11918-ge9f37d3 #1 [ 3.400757] task: c09b14b0 ti: ea03e000 task.ti: 70737573 [ 3.406158] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.411207] LR is at __down_read_trylock+0x14/0x54 [ 3.415993] pc : [<c07d89b0>] lr : [<c027dd08>] psr: 40000193 [ 3.415993] sp : ea03ffb8 ip : c0b0c3e8 fp : ea0400a0 [ 3.427451] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.432668] r7 : c09b14b0 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 3.439185] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.445704] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.452915] Control: 30c5387d Table: 6a3ec500 DAC: fffffffd [ 3.458651] Process %s [ 3.458651] (pid: 29042, stack limit = 0x707377c3) [ 3.465951] Stack: (0xea03ffb8 to 0x70739573) [ 3.470321] [<c07d89b0>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54) [ 3.479364] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 3.487708] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.493796] ---[ end trace c3de729f3d343d57 ]--- [ 3.498411] Alignment trap: not handling instruction e1923f9f at [<c07d89ac>] [ 3.505534] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 4.430002] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 4.437843] IP-Config: Complete: [ 4.441122] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 4.451122] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 4.457726] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 4.464256] nameserver0=172.16.1.1 [ 4.468393] ALSA device list: [ 4.471375] No soundcards found. [ 4.480155] VFS: Mounted root (nfs filesystem) on device 0:11. [ 4.486505] devtmpfs: mounted [ 4.490126] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 4.513772] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.520589] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 4.527715] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 4.534234] Internal error: : 1 [#2] SMP ARM [ 4.538497] Modules linked in: [ 4.541565] CPU: 0 PID: 29042 Comm: %s [ 4.541565] Not tainted 3.14.0-11918-ge9f37d3 #1 [ 4.550088] task: c09ab4a4 ti: ea03c000 task.ti: 70737573 [ 4.555492] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 4.560541] LR is at __down_read_trylock+0x14/0x54 [ 4.565327] pc : [<c07d1af0>] lr : [<c027cfb4>] psr: 40000193 [ 4.565327] sp : ea03df18 ip : c0b06390 fp : ea03e000 [ 4.576789] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 4.582006] r7 : c09ab4a4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 4.588524] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.595042] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.602255] Control: 10c5387d Table: 6a47806a DAC: 00000015 [ 4.607992] Process %s [ 4.607992] (pid: 29042, stack limit = 0x707377c3) [ 4.615291] Stack: (0xea03df18 to 0x70739573) [ 4.619662] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 4.628709] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 4.637055] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 4.644704] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.650793] ---[ end trace 1b60e9ae13371900 ]--- [ 4.655407] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 4.662530] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.017698] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017721] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017735] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017755] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017769] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018714] Switched to clocksource arch_sys_counter [ 0.025688] NET: Registered protocol family 2 [ 0.026157] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026365] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026449] TCP: reno registered [ 0.026463] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026520] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026720] NET: Registered protocol family 1 [ 0.027114] RPC: Registered named UNIX socket transport module. [ 0.027127] RPC: Registered udp transport module. [ 0.027133] RPC: Registered tcp transport module. [ 0.027139] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028104] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028581] bounce pool size: 64 pages [ 0.036391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036409] io scheduler noop registered [ 0.036415] io scheduler deadline registered [ 0.036598] io scheduler cfq registered (default) [ 0.038234] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.079147] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.081562] console [ttyS0] disabled [ 0.101755] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.616818] console [ttyS0] enabled [ 0.621540] mousedev: PS/2 mouse device common for all mice [ 0.627357] i2c /dev entries driver [ 0.632188] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.641167] TCP: cubic registered [ 0.644486] NET: Registered protocol family 17 [ 0.649046] Registering SWP/SWPB emulation handler [ 0.654733] ahci-5v: 5000 mV [ 0.657970] usb1-vbus: 5000 mV [ 0.661386] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.746256] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.759243] TCP: cubic registered [ 2.762653] NET: Registered protocol family 17 [ 2.767717] Key type dns_resolver registered [ 2.773793] ThumbEE CPU extension supported. [ 2.778115] Registering SWP/SWPB emulation handler [ 2.782974] PJ4 iWMMXt coprocessor enabled. [ 2.794055] dvdd_ts: 1800 mV [ 2.798763] usb1_vbus: 5000 mV [ 2.802108] usb1_vbus: supplied by vdd-sys-5v0 [ 2.808120] usb2_vbus: 5000 mV [ 2.811450] usb2_vbus: supplied by vdd-sys-5v0 [ 2.817439] vdd_hdmi_5v0: 5000 mV [ 2.821025] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.830698] vdd_cam_1v8_reg: 1800 mV [ 2.849588] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.856325] [drm] No driver support for vblank timestamp query. [ 2.986437] Console: switching to colour frame buffer device 240x75 [ 3.071994] host1x drm: fb0: frame buffer device [ 3.076868] host1x drm: registered panic notifier [ 3.081652] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.089681] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.101537] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.107216] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.118241] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.142380] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.151745] hub 1-0:1.0: USB hub found [ 3.155903] hub 1-0:1.0: 1 port detected [ 3.164974] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.176939] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.219448] ALSA device list: [ 3.222541] #0: NVIDIA Tegra Dalmore [ 3.230374] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.240342] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.275227] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.283537] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.298581] devtmpfs: mounted [ 3.303418] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.745796] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.758799] TCP: cubic registered [ 2.762147] NET: Registered protocol family 17 [ 2.767287] Key type dns_resolver registered [ 2.773375] ThumbEE CPU extension supported. [ 2.777698] Registering SWP/SWPB emulation handler [ 2.782558] PJ4 iWMMXt coprocessor enabled. [ 2.793481] dvdd_ts: 1800 mV [ 2.797803] usb1_vbus: 5000 mV [ 2.801113] usb1_vbus: supplied by vdd-sys-5v0 [ 2.806920] usb2_vbus: 5000 mV [ 2.810220] usb2_vbus: supplied by vdd-sys-5v0 [ 2.816499] vdd_hdmi_5v0: 5000 mV [ 2.820097] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.829777] vdd_cam_1v8_reg: 1800 mV [ 2.849487] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.856193] [drm] No driver support for vblank timestamp query. [ 2.985914] Console: switching to colour frame buffer device 240x75 [ 3.071390] host1x drm: fb0: frame buffer device [ 3.076259] host1x drm: registered panic notifier [ 3.081036] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.088920] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.100523] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.106179] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.116985] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.142555] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.152061] hub 1-0:1.0: USB hub found [ 3.156165] hub 1-0:1.0: 1 port detected [ 3.165221] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.177197] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.220020] ALSA device list: [ 3.223104] #0: NVIDIA Tegra Dalmore [ 3.230865] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.241346] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.279520] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.287849] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.304572] devtmpfs: mounted [ 3.309268] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot > tftp 0x10800000 mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2 MiB/s done Bytes transferred = 4648072 (46ec88 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 964.8 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46ec88 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 46.731631] smps9: 2100 mV [ 46.735459] smps10_out2: 5000 mV [ 46.739679] smps10_out1: 5000 mV [ 46.743549] ldo1: 1500 <--> 1800 mV [ 46.748142] ldo2: 2800 mV [ 46.752477] ldo3: 1500 mV [ 46.755920] ldo4: 1500 <--> 1800 mV [ 46.761167] ldo5: 1800 mV [ 46.766997] ldo6: 1200 mV [ 46.770678] ldo7: 2000 mV [ 46.775001] ldo8: 3000 mV [ 46.779189] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.785349] ldoln: 1800 mV [ 46.789767] ldousb: 3250 mV [ 46.793267] REGEN1: no parameters [ 46.796823] REGEN2: no parameters [ 46.800515] regen3: no parameters [ 46.804324] SYSEN1: no parameters [ 46.807878] SYSEN2: no parameters [ 47.050779] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.057881] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.064134] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.072058] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.110858] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.124329] ALSA device list: [ 47.127431] No soundcards found. [ 47.131477] Waiting for root device /dev/mmcblk1p2... [ 47.167346] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.177552] mmc2: new high speed SDHC card at address 0001 [ 47.183518] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.188995] mmcblk1: p1 p2 [ 47.241017] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.249867] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.272667] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.281149] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.295717] devtmpfs: mounted [ 47.299091] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 47.332223] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.616145] smps9: 2100 mV [ 47.619956] smps10_out2: 5000 mV [ 47.624175] smps10_out1: 5000 mV [ 47.628028] ldo1: 1500 <--> 1800 mV [ 47.632642] ldo2: 2800 mV [ 47.636978] ldo3: 1500 mV [ 47.640425] ldo4: 1500 <--> 1800 mV [ 47.645654] ldo5: 1800 mV [ 47.651484] ldo6: 1200 mV [ 47.655161] ldo7: 2000 mV [ 47.659491] ldo8: 3000 mV [ 47.663691] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.669845] ldoln: 1800 mV [ 47.674264] ldousb: 3250 mV [ 47.677749] REGEN1: no parameters [ 47.681322] REGEN2: no parameters [ 47.685009] regen3: no parameters [ 47.688794] SYSEN1: no parameters [ 47.692357] SYSEN2: no parameters [ 47.929427] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.209438] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.215669] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 48.223575] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 48.269506] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.282847] ALSA device list: [ 48.285941] No soundcards found. [ 48.289949] Waiting for root device /dev/mmcblk1p2... [ 48.306000] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.316202] mmc2: new high speed SDHC card at address 0001 [ 48.322169] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.327642] mmcblk1: p1 p2 [ 48.399644] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.408453] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.431664] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.440138] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.449854] devtmpfs: mounted [ 48.453227] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 48.487088] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.636657] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.644531] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.651397] usbcore: registered new interface driver usbhid [ 1.657226] usbhid: USB HID core driver [ 1.665130] TCP: cubic registered [ 1.668609] NET: Registered protocol family 17 [ 1.673492] Key type dns_resolver registered [ 1.678436] Power Management for TI OMAP4+ devices. [ 1.683593] Power Management for TI OMAP4. [ 1.687896] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.695037] ThumbEE CPU extension supported. [ 1.699829] Registering SWP/SWPB emulation handler [ 1.699829] PJ4 iWMMXt coprocessor enabled. [ 1.709899] vwl1271: 1800 mV [ 1.714569] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.724273] twl 0-0048: PIH (irq 39) nested IRQs [ 1.729919] twl_rtc rtc.15: Power up reset detected. [ 1.735809] twl_rtc rtc.15: Enabling TWL-RTC [ 1.742584] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.749664] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.755798] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.761901] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.767944] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.773498] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.778930] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.783935] VDAC: 1800 mV [ 1.783935] VANA: 2100 mV [ 1.791259] VCXIO: 1800 mV [ 1.791259] VUSB: 3300 mV [ 1.798187] V1V8: 1800 mV [ 1.801757] V2V1: 2100 mV [ 1.807739] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.888854] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.060882] hub 1-1:1.0: USB hub found [ 2.064971] hub 1-1:1.0: 5 ports detected [ 2.690856] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.841217] smsc95xx v1.0.4 [ 4.144866] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 46:84:6a:3f:35:c1 ~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.950822] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.957051] platform 54200000.dc: Driver tegra-dc requests probe deferral [ 1.966569] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 2.004971] tegra-ehci c5004000.usb: EHCI Host Controller [ 2.010411] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 2.018292] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.034850] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.041962] hub 1-0:1.0: USB hub found [ 2.045842] hub 1-0:1.0: 1 port detected [ 2.053576] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.059043] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 2.066859] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.084846] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.091915] hub 2-0:1.0: USB hub found [ 2.095756] hub 2-0:1.0: 1 port detected [ 2.103295] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.109935] [drm] No driver support for vblank timestamp query. [ 2.186233] Console: switching to colour frame buffer device 170x48 [ 2.214678] host1x drm: fb0: frame buffer device [ 2.219400] host1x drm: registered panic notifier [ 2.224109] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.233338] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.238792] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 2.247860] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 2.264834] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.271691] hub 3-0:1.0: USB hub found [ 2.275512] hub 3-0:1.0: 1 port detected [ 2.280682] input: gpio-keys.4 as /devices/soc0/gpio-keys.4/input/input4 [ 2.288085] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-04-08 18:42:26 UTC (1396982546) [ 2.301278] ALSA device list: [ 2.304243] #0: NVIDIA Tegra Seaboard [ 2.309673] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.346177] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.354303] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.387087] devtmpfs: mounted [ 2.390572] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 2.414877] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.525056] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-5iaXnc/tmp0TvS9d-uImage tftp 0x00100000 tmp/snowball-5iaXnc/tmp0TvS9d-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-5iaXnc/tmp0TvS9d-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4689385 (478de9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4689321 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 4.571770] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 4.581108] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 4.619098] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.626883] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 4.648674] devtmpfs: mounted [ 4.652682] Freeing unused kernel memory: 556K (c0a6e000 - c0af9000) [ 4.700826] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.707947] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 4.715084] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 4.721609] Internal error: : 1 [#2] SMP ARM [ 4.725875] Modules linked in: [ 4.728951] CPU: 0 PID: 29042 Comm: %s [ 4.728951] Not tainted 3.14.0-11918-ge9f37d3 #1 [ 4.737491] task: c09ab4a4 ti: ea03a000 task.ti: 70737573 [ 4.742911] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 4.747972] LR is at __down_read_trylock+0x14/0x54 [ 4.752768] pc : [<c07d1af0>] lr : [<c027cfb4>] psr: 40000193 [ 4.752768] sp : ea03bee8 ip : c0b06390 fp : ea03bfd0 [ 4.764236] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 4.769461] r7 : c09ab4a4 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 4.775984] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.782513] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.789732] Control: 10c5387d Table: 2a4c404a DAC: 00000015 [ 4.795476] Process %s [ 4.795476] (pid: 29042, stack limit = 0x707377c3) [ 4.802784] Stack: (0xea03bee8 to 0x70739573) [ 4.807167] [<c07d1af0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 4.816240] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 4.824605] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 4.832288] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 4.839679] Exception stack(0xea03bfd0 to 0xea03c018) [ 4.844736] bfc0: 0000017c 00000017 ea03c000 00000193 [ 4.852919] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 4.861096] c000: c0b06390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 4.867718] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.873814] ---[ end trace 5f3af4d60c96ddb3 ]--- [ 4.878435] Alignment trap: not handling instruction e1923f9f at [<c07d1aec>] [ 4.885568] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 6.1 MiB/s done Bytes transferred = 4648072 (46ec88 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 manode: wandboard status: on inline/v3.14-11918-ge9f37d3/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-11918-ge9f37d3/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.1 MiB/s done Bytes transferred = 29143 (71d7 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46ec88 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6
Starting kernel ...
~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org