queue boot: 29 pass, 6 fail (v3.12.9-132-g3c09ba2) - Kernel-build-reports

5 Feb 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.12.9-132-g3c09ba2
Failed boot tests (console logs at the end)
===========================================
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
          armada-370-mirabox:     FAIL:    multi_v7_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    multi_v7_defconfig
                ste-snowball:     FAIL:    u8500_defconfig
          armada-370-mirabox:     FAIL:    mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
            am335x-boneblack     PASS:    0 min 25.1 sec
             omap3-beagle-xm     PASS:    0 min 57.6 sec
                 am335x-bone     PASS:    0 min 26.6 sec
                 omap4-panda     PASS:    1 min  1.4 sec
              omap4-panda-es     PASS:    1 min  9.0 sec
        omap3-tobi,3730storm     PASS:    0 min 21.1 sec
        omap3-tobi,3530overo     PASS:    0 min 22.3 sec
multi_lpae_defconfig
--------------------
       sun7i-a20-cubieboard2     FAIL:    0 min 31.4 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 16.9 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 17.9 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.9 sec
             imx6q-wandboard     PASS:    0 min 16.3 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    0 min 58.9 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    0 min 30.6 sec
multi_v7_defconfig
------------------
                ste-snowball     PASS:    0 min 25.6 sec
              tegra30-beaver     PASS:    0 min 16.9 sec
            am335x-boneblack     PASS:    0 min 32.1 sec
             omap3-beagle-xm     PASS:    1 min  2.2 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 31.4 sec
          armada-370-mirabox     FAIL:    0 min 28.7 sec
                 omap4-panda     PASS:    1 min  4.4 sec
              omap4-panda-es     PASS:    1 min  8.5 sec
  armada-xp-openblocks-ax3-4     FAIL:    0 min 30.2 sec
        sun4i-a10-cubieboard     PASS:    0 min 16.5 sec
                 bcm28155-ap     PASS:    1 min 15.4 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.1 sec
                 am335x-bone     PASS:    0 min 33.9 sec
             imx6q-wandboard     PASS:    0 min 16.4 sec
        omap3-tobi,3730storm     PASS:    0 min 20.0 sec
  imx6dl-wandboard,wand-dual     PASS:    0 min 17.0 sec
        omap3-tobi,3530overo     PASS:    0 min 20.5 sec
u8500_defconfig
---------------
                ste-snowball     FAIL:    0 min 31.6 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.3 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     PASS:    0 min 21.9 sec
          armada-370-mirabox     FAIL:    0 min 27.8 sec
Console logs for failures
=========================
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset
(user:khilman) Reboot cubie2
Reboot: cubie2 ; phidget 3 0 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.39 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset
(user:khilman) Reboot cubie2
Reboot: cubie2 ; phidget 3 0 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 80 lines of boot log:
    ----------------------------------------------------
phy16= 72 
MMC:   MRVL_MMC: 0
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:  
3  0 
Marvell>> 
Marvell>> version
version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ
Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk
setenv bootargs console=ttyS0,115200 debug earlyprintk
Marvell>> setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
Marvell>> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Marvell>>if test -n ${preboot}; then run preboot; fi
 if test -n ${preboot}; then run preboot; fi
Marvell>> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Marvell>dhcp
...
dhcp
phyaddr= 0
BOOTP broadcast 1
DHCP client bound to address 192.168.1.183
Marvell>>setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
Marvell>> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-335Tl0/tmpfNK257-uImage
tftp 0x02000000 192.168.1.2:tmp/mirabox-335Tl0/tmpfNK257-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'tmp/mirabox-335Tl0/tmpfNK257-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################
done
Bytes transferred = 3575749 (368fc5 hex)
Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 639808 (9c340 hex)
Marvell>>printenv bootargs
 printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
Marvell>> bootm 0x02000000 0x03000000 
bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-02-05  10:36:17 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3575685 Bytes =  3.4 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 kB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.69 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
Net:   egiga0, egiga1, egiga2, egiga3
Hit any key to stop autoboot:  
1  0 
openblocks> 
openblocks> version
version
U-Boot 2011.12 (Aug 26 2013 - 13:08:34)
Plat'Home version: 2.0.7 (Marvell version: 2012_Q4.0p17)
arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 4.6.4 20120731 (prerelease)
GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 2.22.0.20120801
openblocks> setenv bootargs console=ttyS0,115200 debug earlyprintk
setenv bootargs console=ttyS0,115200 debug earlyprintk
openblocks> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
openblocks> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
openblocks> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
openblocks> dhcp
dhcp
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.158
openblocks> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
openblocks> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
openblocks> tftp 0x02000000 192.168.1.2:tmp/obsax3-ebgblD/tmpFO9gEB-uImage
tftp 0x02000000 192.168.1.2:tmp/obsax3-ebgblD/tmpFO9gEB-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.158
Filename 'tmp/obsax3-ebgblD/tmpFO9gEB-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################
done
Bytes transferred = 3580684 (36a30c hex)
openblocks> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.158
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 639808 (9c340 hex)
openblocks>printenv bootargs
 printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
openblocks> bootm 0x02000000 0x03000000 
bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-02-05  10:39:26 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3580620 Bytes = 3.4 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.16 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 80 lines of boot log:
    ----------------------------------------------
Connected to snowball console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(snowball console)> hardreset
(user:khilman) Reboot snowball
Reboot: snowball ; ip9258 2 2 :  ('off', 6, 'on')
, sleep 6,
 0 
U8500 $ ~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.56 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-370-mirabox: FAIL: last 80 lines of boot log:
    ----------------------------------------------------
phy16= 72 
phy16= 72 
MMC:   MRVL_MMC: 0
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:  
3  0 
Marvell>> 
Marvell>> version
version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ
Marvell>setenv bootargs console=ttyS0,115200 debug earlyprintk
...
setenv bootargs console=ttyS0,115200 debug earlyprintk
Marvell>> setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
Marvell>> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Marvell>> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Marvell>> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Marvell>> dhcp
dhcp
phyaddr= 0
BOOTP broadcast 1
DHCP client bound to address 192.168.1.183
Marvell>> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Marvell>> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Marvell>tftp 0x02000000 192.168.1.2:tmp/mirabox-osAD4Y/tmpgwKYxQ-uImage
...
tftp 0x02000000 192.168.1.2:tmp/mirabox-osAD4Y/tmpgwKYxQ-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'tmp/mirabox-osAD4Y/tmpgwKYxQ-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     ###################################################
done
Bytes transferred = 2653389 (287ccd hex)
Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 639808 (9c340 hex)
Marvell>>printenv bootargs
 printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
Marvell>> bootm 0x02000000 0x03000000 
bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-02-05  10:52:04 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2653325 Bytes =  2.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 kB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 27.84 seconds.
# PYBOOT: Result: FAIL