Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-113-g83858a7/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 19:03.63 bbb arm-omap2plus_defconfig : FAILED 1:55.15 bbb arm-multi_v7_defconfig : FAILED 1:54.63 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:03.60 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.14 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.61 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:51.27 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:07.62 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.65 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.44 cosmic arm-multi_v7_defconfig : FAILED 2:07.41 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:11.61 dalmore arm-tegra_defconfig : FAILED 1:48.40 dalmore arm-multi_v7_defconfig : FAILED 2:00.21 dalmore arm-multi_lpae_defconfig : FAILED 1:59.43 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.92 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:55.83 omap5uevm arm-multi_v7_defconfig : FAILED 2:04.71 omap5uevm arm-multi_lpae_defconfig : FAILED 0:53.34 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:34.69 seaboard arm-tegra_defconfig : FAILED 1:48.23 seaboard arm-multi_v7_defconfig : FAILED 1:58.41 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:54.77 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.79 snowball arm-u8500_defconfig : FAILED 1:56.51 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:00.33

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:15.50 arndale arm-exynos_defconfig : passed 1:33.50 arndale arm-multi_v7_defconfig : passed 1:26.68 arndale arm-multi_lpae_defconfig : passed 1:23.49 capri arm-bcm_defconfig : passed 0:44.96 capri arm-multi_v7_defconfig : passed 0:55.10 capri arm-multi_v7_nosmp_defconfig : warnings 0:54.61 chitra powerpc-ppc64_defconfig : passed 3:07.44 colombus arm-sunxi_defconfig : passed 2:20.69 colombus arm-multi_v7_defconfig : passed 2:39.04 colombus arm-multi_lpae_defconfig : passed 2:38.63 cubie arm-sunxi_defconfig : passed 0:56.77 cubie arm-multi_v7_defconfig : passed 0:58.53 cubie arm-multi_v7_nosmp_defconfig : passed 1:00.43 cubie2 arm-sunxi_defconfig : passed 0:51.12 cubie2 arm-multi_v7_defconfig : passed 1:02.69 cubie2 arm-multi_lpae_defconfig : passed 1:06.02 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:02.35 cubox arm-multi_v7_defconfig : passed 1:18.67 cubox arm-mvebu_v7_defconfig : passed 1:03.96 cubox arm-multi_v7_nosmp_defconfig : passed 1:14.39 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.54 hummingboard arm-multi_v7_defconfig : passed 1:35.81 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:09.37 jetsontk1 arm-tegra_defconfig : passed 1:35.71 jetsontk1 arm-multi_v7_defconfig : passed 1:31.39 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:47.50 omap5uevm arm-omap2plus_defconfig : passed 1:08.85 pandaes arm-omap2plus_defconfig : warnings 1:35.99 pandaes arm-multi_v7_defconfig : passed 1:47.48 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:48.99 pi arm-exynos_defconfig : passed 2:13.83 pi arm-multi_v7_defconfig : passed 2:23.79 pi arm-multi_lpae_defconfig : passed 2:40.89 pi arm-multi_v7_nosmp_defconfig : warnings 2:11.74 pit arm-exynos_defconfig : passed 2:10.35 pit arm-multi_v7_defconfig : passed 2:16.60 pit arm-multi_lpae_defconfig : passed 2:27.40 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.14 seattle arm64-defconfig : warnings 2:18.88 snow arm-exynos_defconfig : passed 2:09.01 snow arm-multi_v7_defconfig : passed 2:20.16 snow arm-multi_lpae_defconfig : passed 1:58.61 trimslice arm-multi_v7_defconfig : passed 3:05.21 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:36.97 wandboard arm-imx_v6_v7_defconfig : passed 1:17.50 wandboard arm-multi_v7_defconfig : passed 1:11.63 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:11.23

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:13.39 beaver arm-multi_v7_defconfig : OFFLINE 2:18.19 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:20.37 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.75 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:16.04 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:27.49 jetsontk1 arm-multi_lpae_defconfig : OFFLINE 3:13.53 parallella arm-multi_v7_defconfig : OFFLINE 2:35.21 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.64 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:52.56 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:59.31 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:45.63 sama5 arm-sama5_defconfig : OFFLINE 2:19.34 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:37.94 snowball arm-multi_v7_defconfig : OFFLINE 3:59.35 socfpga arm-socfpga_defconfig : OFFLINE 2:26.33 socfpga arm-multi_v7_defconfig : OFFLINE 2:27.98 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.50 trimslice arm-tegra_defconfig : OFFLINE 2:18.74

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.580269] usbcore: registered new interface driver zaurus [ 1.585849] usbcore: registered new interface driver cdc_ncm [ 1.592144] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.598770] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.605882] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.611671] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.618190] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.626567] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.631630] ehci-pci: EHCI PCI platform driver [ 1.636075] ehci-platform: EHCI generic platform driver [ 1.641400] ehci-omap: OMAP-EHCI Host Controller driver [ 1.646546] ehci-orion: EHCI orion driver [ 1.650540] SPEAr-ehci: EHCI SPEAr driver [ 1.654535] ehci-st: EHCI STMicroelectronics driver [ 1.659399] ehci-exynos: EHCI EXYNOS driver [ 1.663646] ehci-atmel: EHCI Atmel driver [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc6-00113-g83858a7 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Tue May 3 19:07:14 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd334, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 [PYBOOT] [arndale 18:58]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 18:59]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.631266] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641528] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648618] usbcore: registered new interface driver usbhid [ 1.654547] usbhid: USB HID core driver [ 1.666558] NET: Registered protocol family 10 [ 1.673151] sit: IPv6 over IPv4 tunneling driver [ 1.679297] NET: Registered protocol family 17 [ 1.684069] can: controller area network core (rev 20120528 abi 9) [ 1.690709] NET: Registered protocol family 29 [ 1.695427] can: raw protocol (rev 20120528) [ 1.699945] can: broadcast manager protocol (rev 20120528 t) [ 1.705938] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712680] Key type dns_resolver registered [ 1.717589] omap_voltage_late_init: Voltage driver support not added [ 1.725871] ThumbEE CPU extension supported. [ 1.730504] Registering SWP/SWPB emulation handler [ 1.772708] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779247] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787021] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795705] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803614] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811439] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819248] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826591] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835270] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843196] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852925] mmc1: new high speed MMC card at address 0001 [ 1.860168] hctosys: unable to open rtc device (rtc0) [ 1.873187] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879188] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886169] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895022] mmcblk1: p1 p2 [ 1.900720] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.322466] sdhci: Secure Digital Host Controller Interface driver [ 1.328991] sdhci: Copyright(c) Pierre Ossman [ 1.334799] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.397827] Synopsys Designware Multimedia Card Interface Driver [ 1.405213] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.414408] ledtrig-cpu: registered to indicate activity on CPUs [ 1.421162] usbcore: registered new interface driver usbhid [ 1.427054] usbhid: USB HID core driver [ 1.436667] NET: Registered protocol family 10 [ 1.443146] sit: IPv6 over IPv4 tunneling driver [ 1.449021] NET: Registered protocol family 17 [ 1.453757] can: controller area network core (rev 20120528 abi 9) [ 1.460353] NET: Registered protocol family 29 [ 1.465047] can: raw protocol (rev 20120528) [ 1.469559] can: broadcast manager protocol (rev 20120528 t) [ 1.475537] can: netlink gateway (rev 20130117) max_hops=1 [ 1.482043] Key type dns_resolver registered [ 1.486917] omap_voltage_late_init: Voltage driver support not added [ 1.494712] ThumbEE CPU extension supported. [ 1.507295] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.514853] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.522910] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530636] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.538318] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545994] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.553274] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.560950] hctosys: unable to open rtc device (rtc0) [ 1.571672] Waiting for root device /dev/mmcblk0p2... [ 1.607104] mmc1: new high speed MMC card at address 0001 [ 1.613573] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.618640] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.625126] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.633555] mmcblk1: p1 p2

[PYBOOT] [bbb 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:01]: got exception: timeout ~$off

[PYBOOT] [bbb 02:03]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.049068] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.055204] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.061553] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.068449] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.078073] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.087601] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.094639] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.137815] ledtrig-cpu: registered to indicate activity on CPUs [ 2.146530] oprofile: using arm/armv7 [ 2.151623] Initializing XFRM netlink socket [ 2.156701] NET: Registered protocol family 10 [ 2.167380] sit: IPv6 over IPv4 tunneling driver [ 2.176137] NET: Registered protocol family 17 [ 2.181069] NET: Registered protocol family 15 [ 2.186320] Key type dns_resolver registered [ 2.191248] omap_voltage_late_init: Voltage driver support not added [ 2.197989] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.206483] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.216746] ThumbEE CPU extension supported. [ 2.221395] Registering SWP/SWPB emulation handler [ 2.226444] SmartReflex Class3 initialized [ 2.295565] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.302859] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.313378] mmc1: new high speed MMC card at address 0001 [ 2.325450] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.333712] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.341509] hctosys: unable to open rtc device (rtc0) [ 2.346831] sr_init: No PMIC hook to init smartreflex [ 2.352629] sr_init: platform driver register failed for SR [ 2.392566] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.400529] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.414781] mmcblk1: p1 p2 [ 2.432019] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.722178] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.729261] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755403] rtc-ds1307 2-006f: SET TIME! [ 1.761159] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.767912] rtc-ds1307 2-006f: 64 bytes nvram [ 1.772523] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.780717] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.786507] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.794743] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.803903] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.810782] hub 1-0:1.0: USB hub found [ 1.814740] hub 1-0:1.0: 1 port detected [ 1.819120] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.824893] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.832997] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.842006] hub 2-0:1.0: USB hub found [ 1.845967] hub 2-0:1.0: 1 port detected [ 1.851981] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.885997] vdd_3v3: supplied by regen1 [ 1.924936] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.943071] aic_dvdd_fixed: disabling [ 1.947802] Waiting for root device /dev/mmcblk0p1... [ 1.976965] mmc1: new high speed MMC card at address 0001 [ 1.982924] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.987809] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.994145] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.001017] mmcblk1: p1 [ 2.124892] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.159916] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.185114] hub 2-1:1.0: USB hub found [ 2.189090] hub 2-1:1.0: 4 ports detected [ 2.281136] hub 1-1:1.0: USB hub found [ 2.285119] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.727091] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.734168] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.760397] rtc-ds1307 2-006f: SET TIME! [ 1.766149] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.772919] rtc-ds1307 2-006f: 64 bytes nvram [ 1.777535] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.785721] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.791503] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.799755] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.808920] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.815794] hub 1-0:1.0: USB hub found [ 1.819746] hub 1-0:1.0: 1 port detected [ 1.824137] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.829915] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.838023] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.847049] hub 2-0:1.0: USB hub found [ 1.851016] hub 2-0:1.0: 1 port detected [ 1.857051] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.891013] vdd_3v3: supplied by regen1 [ 1.927573] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.945763] aic_dvdd_fixed: disabling [ 1.950508] Waiting for root device /dev/mmcblk0p1... [ 1.981952] mmc1: new high speed MMC card at address 0001 [ 1.987926] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.992812] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999145] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006011] mmcblk1: p1 [ 2.129891] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.164917] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.190133] hub 2-1:1.0: USB hub found [ 2.194109] hub 2-1:1.0: 4 ports detected [ 2.286161] hub 1-1:1.0: USB hub found [ 2.290147] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.590730] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597788] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623013] rtc-ds1307 2-006f: SET TIME! [ 1.628640] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635347] rtc-ds1307 2-006f: 64 bytes nvram [ 1.639937] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647324] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653104] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661319] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670463] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677187] hub 1-0:1.0: USB hub found [ 1.681145] hub 1-0:1.0: 1 port detected [ 1.685460] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691227] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699304] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708174] hub 2-0:1.0: USB hub found [ 1.712117] hub 2-0:1.0: 1 port detected [ 1.717367] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753247] vdd_3v3: supplied by regen1 [ 1.784323] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797332] aic_dvdd_fixed: disabling [ 1.802713] Waiting for root device /dev/mmcblk0p1... [ 1.849543] mmc1: new high speed MMC card at address 0001 [ 1.855414] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860243] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866539] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873324] mmcblk1: p1 [ 1.992546] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022568] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051405] hub 2-1:1.0: USB hub found [ 2.055384] hub 2-1:1.0: 4 ports detected [ 2.147407] hub 1-1:1.0: USB hub found [ 2.151371] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 02:04]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:06]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.174138] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181013] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191405] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196262] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202552] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209419] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219020] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228527] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235584] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283778] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290079] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296949] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306543] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316040] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323082] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329200] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335508] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342346] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351922] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361428] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368474] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375174] vdd_3v3: supplied by regen1 [ 2.413868] hctosys: unable to open rtc device (rtc0) [ 2.419165] sr_init: No PMIC hook to init smartreflex [ 2.424676] sr_init: platform driver register failed for SR [ 2.471841] aic_dvdd_fixed: disabling [ 2.476104] ldousb: disabling [ 2.483855] Waiting for root device /dev/mmcblk0p1... [ 2.535484] mmc1: new high speed MMC card at address 0001 [ 2.543230] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548517] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555357] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563896] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.837152] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.851530] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.172862] random: dd urandom read with 55 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.570861] eth0: device MAC address 9e:6e:20:73:c5:af [ 89.728449] RX IPC Checksum Offload disabled [ 89.733059] No MAC Management Counters available [ 89.738815] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/9e:6e:20:73:c5:af Sending on LPF/eth0/9e:6e:20:73:c5:af Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16

[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:19]: got exception: timeout ~$off

[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.457156] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.531397] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.541719] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.615907] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.626225] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.700468] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.710795] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.784979] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.795300] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.869538] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.879865] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.954050] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.964374] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.038634] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.049091] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.123386] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.133708] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.207937] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.218252] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.292482] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.302797] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.377033] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.387351] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.461582] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.471904] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.546077] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.556398] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.630624] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.640942] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.715126] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.725445] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.799666] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.809989] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.077644] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.151632] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.161713] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.235695] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.245771] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.319755] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.329846] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.403838] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.413933] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.487921] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.498005] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.571998] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.582067] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.656056] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.666128] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.740119] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.750187] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.824237] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.834303] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.908289] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.918359] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.992350] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.002418] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.076407] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.086478] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.160466] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.170541] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.244522] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.254598] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.328585] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.338659] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.412650] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.422728] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:05]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:06]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.872585] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.946497] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.956549] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.030462] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.040523] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114436] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.124495] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198409] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.208469] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.282381] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.292443] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.366364] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376425] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.450348] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460415] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.534327] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.544373] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.618283] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.628329] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.702238] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.712285] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.786193] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.796241] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.870153] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.880206] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.954120] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.964179] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.038094] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.048152] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.122067] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.132125] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.206032] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.216090] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:09]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:10]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.486260] Key type dns_resolver registered [ 2.492658] ThumbEE CPU extension supported. [ 2.497083] Registering SWP/SWPB emulation handler [ 2.522031] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.529284] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.540789] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.557059] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.563858] [drm] No driver support for vblank timestamp query. [ 2.582940] mmc1: new high speed MMC card at address 0001 [ 2.593019] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.602303] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.612283] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.621102] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.632510] mmcblk1: p1 [ 2.742444] Console: switching to colour frame buffer device 240x75 [ 2.829847] drm drm: fb0: frame buffer device [ 2.849053] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859164] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870790] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876387] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885162] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.899071] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909337] hub 1-0:1.0: USB hub found [ 2.913344] hub 1-0:1.0: 1 port detected [ 2.923487] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937349] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.000490] dvdd_ts: disabling [ 3.003591] usb1_vbus: disabling [ 3.006956] vdd_cam_1v8_reg: disabling [ 3.014437] Waiting for root device /dev/mmcblk0p1... [ 3.224068] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.201867] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.009031] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.485402] Key type dns_resolver registered [ 2.491812] ThumbEE CPU extension supported. [ 2.496233] Registering SWP/SWPB emulation handler [ 2.542278] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.548589] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.557077] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.573341] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.580233] [drm] No driver support for vblank timestamp query. [ 2.593581] mmc1: new high speed MMC card at address 0001 [ 2.602369] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.608948] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.616968] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.625021] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.634641] mmcblk1: p1 [ 2.758108] Console: switching to colour frame buffer device 240x75 [ 2.845122] drm drm: fb0: frame buffer device [ 2.865142] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.875273] usb2_vbus: supplied by vdd-sys-5v0 [ 2.886032] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.891629] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.900461] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.915177] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.925520] hub 1-0:1.0: USB hub found [ 2.929594] hub 1-0:1.0: 1 port detected [ 2.939590] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.953559] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.015944] dvdd_ts: disabling [ 3.019045] usb1_vbus: disabling [ 3.022412] vdd_cam_1v8_reg: disabling [ 3.030091] Waiting for root device /dev/mmcblk0p1... [ 3.240178] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.198592] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.515141] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.031236] can: broadcast manager protocol (rev 20120528 t) [ 2.036992] can: netlink gateway (rev 20130117) max_hops=1 [ 2.043646] Key type dns_resolver registered [ 2.048758] ThumbEE CPU extension supported. [ 2.080573] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.085511] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.095589] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.118676] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.125358] [drm] No driver support for vblank timestamp query. [ 2.290140] Console: switching to colour frame buffer device 240x75 [ 2.376015] drm drm: fb0: frame buffer device [ 2.380632] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.388591] usb2_vbus: supplied by vdd-sys-5v0 [ 2.394600] mmc1: new high speed MMC card at address 0001 [ 2.403752] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.409366] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.417427] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.422435] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.429142] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.435213] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.441614] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.448352] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.455463] mmcblk1: p1 [ 2.460341] hub 1-0:1.0: USB hub found [ 2.468605] hub 1-0:1.0: 1 port detected [ 2.476735] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.487997] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.521093] dvdd_ts: disabling [ 2.524181] usb1_vbus: disabling [ 2.527511] vdd_cam_1v8_reg: disabling [ 2.532925] Waiting for root device /dev/mmcblk0p1... [ 2.779578] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.730796] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.625469] Bluetooth: RFCOMM ver 1.11 [ 2.629450] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.634845] Bluetooth: BNEP socket layer initialized [ 2.639941] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.645939] Bluetooth: HIDP socket layer initialized [ 2.652836] Key type dns_resolver registered [ 2.662480] Registering SWP/SWPB emulation handler [ 2.687623] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.693127] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.700111] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.721916] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.728827] [drm] No driver support for vblank timestamp query. [ 2.906904] Console: switching to colour frame buffer device 240x75 [ 2.993784] drm drm: fb0: frame buffer device [ 3.018672] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.025950] usb2_vbus: supplied by vdd-sys-5v0 [ 3.034363] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.040186] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.049369] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.068678] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.082740] hub 1-0:1.0: USB hub found [ 3.086722] hub 1-0:1.0: 1 port detected [ 3.100472] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.115571] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.211127] dvdd_ts: disabling [ 3.214241] usb1_vbus: disabling [ 3.217505] vdd_cam_1v8_reg: disabling [ 3.222333] ALSA device list: [ 3.225338] #0: NVIDIA Tegra Dalmore [ 3.231320] Waiting for root device /dev/mmcblk0p1... [ 3.408572] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.432064] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.628635] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.647420] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.656323] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.687461] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.688637] usbcore: registered new interface driver usbhid [ 1.693879] usbhid: USB HID core driver [ 1.702577] NET: Registered protocol family 10 [ 1.703196] sit: IPv6 over IPv4 tunneling driver [ 1.706410] NET: Registered protocol family 17 [ 1.710438] NET: Registered protocol family 15 [ 1.714897] Key type dns_resolver registered [ 1.719224] Registering SWP/SWPB emulation handler [ 1.725051] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.729469] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.736871] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.756361] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.760637] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.767981] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770201] max98090 1-0010: use default 2.8v micbias [ 1.780271] mmc1: new DDR MMC card at address 0001 [ 1.785433] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.789163] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.789321] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.789555] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.789773] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.801378] mmcblk1: p1 p2 [ 1.818571] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.855623] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.874778] VDD10_HDMI_1.0V: disabling [ 1.875476] vdd_g3d: disabling [ 1.876548] BUCK8_2.8V: disabling [ 1.880561] ALSA device list: [ 1.882166] #0: Odroid-U3 [ 1.885847] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:53]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:54]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.068731] 7c40: c030c494 ee087cc8 fa212000 c03017d4 00000000 c0310394 000000e6 ee087cc8 [ 2.068735] 7c60: c030c494 c030c494 00000000 c133f988 000000e6 c030b968 c133f988 c058b994 [ 2.068738] 7c80: c1410680 00000000 00000000 c030eac4 c1302880 c1340078 fa21200c ee087cc8 [ 2.068742] 7ca0: fa212000 c03017d4 c03827b0 60000013 ffffffff ee087cfc c14339b0 00000006 [ 2.068746] 7cc0: 00000000 c030c494 00000000 0000000d 00000001 60000013 000000e7 00000000 [ 2.068749] 7ce0: 00000004 00000061 c14339b0 00000006 00000000 000000e6 00000000 ee087d18 [ 2.068753] 7d00: c06dd360 c03827b0 60000013 ffffffff 00000051 c03827a8 00000400 00000051 [ 2.068757] 7d20: 00000003 c1413a30 60000013 00000000 c1337708 c0ee2ae8 00000001 ee086000 [ 2.068761] 7d40: c13024a4 00000000 c1413a30 00000051 c1413a30 c1337708 c143637e 00000000 [ 2.068764] 7d60: 00000000 00000000 00000000 c0382be4 00000000 00000000 00000000 00000000 [ 2.068768] 7d80: c143637e 00000051 00000004 00000000 60000013 00000000 00000000 00000000 [ 2.068772] 7da0: ee5abd00 ee5abd00 00000000 00000000 ee5abd04 c1302684 c1454078 00000001 [ 2.068776] 7dc0: c1207590 c0382f38 c0f9d970 ee087dec 0016e360 c03c7cb4 ee5abd00 ee087dec [ 2.068779] 7de0: 00000000 c0995a58 c0f9d970 c0d6ae44 00000000 0016e360 00000000 00000000 [ 2.068783] 7e00: ee5abdb0 ee5abd04 20000013 00000000 ee624f60 c13c2a68 c13a2a40 c13c2a14 [ 2.068787] 7e20: fffffdfb 00000000 0000000e ee00b000 ee03ec00 c0779704 ee67a000 ee03fc5c [ 2.068791] 7e40: ee1ab534 00000000 c1334cc8 c13c2de4 c1454078 c09943f8 ee6f39c0 eefc9050 [ 2.068794] 7e60: ee5dde00 c0997efc ee5dde10 ffffffed c13c2d9c c077c7a0 ee5dde10 c144fcf4 [ 2.068798] 7e80: c144fcfc c13c2d9c 00000000 c077afbc 00000000 ee087ec8 c077b124 00000001 [ 2.068802] 7ea0: ee5aba00 00000000 ee00b000 c07793dc ee03fb70 ee0cb538 ee5dde10 ee5dde44 [ 2.068806] 7ec0: c13a29c0 c077acd4 ee5dde10 00000001 2ddd1000 ee5dde10 ee5dde10 c13a29c0 [ 2.068809] 7ee0: c13a27e0 c077a1b8 ee5dde10 c13a27c0 c13a27c0 c077a644 c13a27f4 ee03ec00 [ 2.068813] 7f00: ee00b000 00000000 ee5aba00 c0356718 c1302100 ee00b018 ee00b000 ee03ec18 [ 2.068817] 7f20: 00000088 c1302100 ee00b018 ee086000 ee00b000 c0357384 ee00b168 00000000 [ 2.068821] 7f40: c035734c 00000000 ee03dc40 ee03ec00 c035734c 00000000 00000000 00000000 [ 2.068825] 7f60: 00000000 c035c140 00000001 00000000 42480427 ee03ec00 00000000 00000000 [ 2.068828] 7f80: ee087f80 ee087f80 00000000 00000000 ee087f90 ee087f90 ee03dc40 ee03dc40 [ 2.068832] 7fa0: c035c064 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.068835] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.068839] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 3015c023 71868600 [ 2.068844] [<c0589874>] (__timer_const_udelay) from [<c1413fa0>] (0xc1413fa0) [ 2.068848] Code: 3afffff6 e8bd8070 e30f3970 e34c3133 (e593200c) [ 2.068851] ---[ end trace c7592f6d8821ee00 ]--- [ 3.041776] SMP: failed to stop secondary CPUs [ 4.033889] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [omap5uevm 00:51]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:52]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.762140] usbcore: registered new interface driver usbhid [ 1.764133] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.774910] usbhid: USB HID core driver [ 1.783428] NET: Registered protocol family 10 [ 1.788563] sit: IPv6 over IPv4 tunneling driver [ 1.793865] NET: Registered protocol family 17 [ 1.798530] can: controller area network core (rev 20120528 abi 9) [ 1.805035] NET: Registered protocol family 29 [ 1.809692] can: raw protocol (rev 20120528) [ 1.814158] can: broadcast manager protocol (rev 20120528 t) [ 1.820082] can: netlink gateway (rev 20130117) max_hops=1 [ 1.826095] Key type dns_resolver registered [ 1.830654] omap_vc_init_channel: No PMIC info for vdd_core [ 1.836488] omap_vp_init: No PMIC info for vdd_core [ 1.841588] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.847235] omap_vp_init: No PMIC info for vdd_mm [ 1.852160] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.857896] omap_vp_init: No PMIC info for vdd_mpu [ 1.863425] Power Management for TI OMAP4+ devices. [ 1.868650] ThumbEE CPU extension supported. [ 1.873144] Registering SWP/SWPB emulation handler [ 1.880185] palmas 0-0048: Irq flag is 0x00000000 [ 1.906937] smsc95xx v1.0.4 [ 1.910206] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.920997] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.928851] mmc0: new high speed MMC card at address 0001 [ 1.936312] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.941225] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.947582] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.973597] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, be:04:55:a5:fb:71 [ 1.994031] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.019896] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.060879] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.068818] cpufreq: cpufreq_online: CPU0: Unlisted initial [PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 36.713108] 3de0: 00000001 ee006000 fa213000 c0315242 00000000 c0338e40 c103e4e0 c0361ba8 [ 36.713111] 3e00: c10023f4 c103e990 fa21200c fa212000 ee4f3e38 c0301620 c03373b0 60000113 [ 36.713115] 3e20: ffffffff ee4f3e6c ee4f3e88 ee4816e8 c0315242 c030bcd4 00000001 ee072254 [ 36.713118] 3e40: 00000000 ee28f8c0 ee481540 00000000 ee06c000 00000000 ee4f3e88 ee4816e8 [ 36.713122] 3e60: c0315242 00000000 ee072240 ee4f3e88 c0357e7c c03373b0 60000113 ffffffff [ 36.713125] 3e80: 00000051 c0337758 ee481704 ee481704 c0315244 0000000b 00000000 c030b5c4 [ 36.713129] 3ea0: ee4f2218 0000000b 00000000 00000008 ee4f2000 00000000 65000000 38306131 [ 36.713133] 3ec0: 20303030 30613165 31303037 39356520 30303532 33652063 30306331 28203038 [ 36.713136] 3ee0: 35393565 63323136 c0002029 ee4f3f0c 024000c0 000e05ae ee4f4010 00000005 [ 36.713140] 3f00: 00000000 000e05ae c034de44 c034de42 00000000 c031a290 00000005 c0315580 [ 36.713143] 3f20: c073c864 ee071ce8 c03528a0 c03579ec 00000000 a0000053 ee42ed80 ee4f2000 [ 36.713147] 3f40: ee42ed80 ee40c800 c073e880 c1008034 00000005 c031562c 000e05ae ee4f4010 [ 36.713150] 3f60: c034de44 c034de42 00000000 c030125c a204a855 00000000 c034da40 ee40c800 [ 36.713154] 3f80: 00000000 ee4f3f84 ee4f3f84 00000001 ee4f3f90 ee4f3f90 ee42ed80 ee42ed80 [ 36.713157] 3fa0: c034da40 00000000 00000000 c0307998 00000000 00000000 00000000 00000000 [ 36.713160] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 36.713164] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0315240 00000193 [ 36.713169] [<c036b6ec>] (run_timer_softirq) from [<c0338a3c>] (__do_softirq+0xac/0x214) [ 36.713174] [<c0338a3c>] (__do_softirq) from [<c0338e40>] (irq_exit+0xd8/0x10c) [ 36.713179] [<c0338e40>] (irq_exit) from [<c0361ba8>] (__handle_domain_irq+0x58/0xa8) [ 36.713183] [<c0361ba8>] (__handle_domain_irq) from [<c0301620>] (gic_handle_irq+0x54/0x88) [ 36.713187] [<c0301620>] (gic_handle_irq) from [<c030bcd4>] (__irq_svc+0x54/0x70) [ 36.713188] Exception stack(0xee4f3e38 to 0xee4f3e80) [ 36.713190] 3e20: 00000001 ee072254 [ 36.713193] 3e40: 00000000 ee28f8c0 ee481540 00000000 ee06c000 00000000 ee4f3e88 ee4816e8 [ 36.713197] 3e60: c0315242 00000000 ee072240 ee4f3e88 c0357e7c c03373b0 60000113 ffffffff [ 36.713201] [<c030bcd4>] (__irq_svc) from [<c03373b0>] (do_exit+0x524/0x908) [ 36.713206] [<c03373b0>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 36.713211] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 36.713216] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 36.713219] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 36.713223] Code: e7973106 e3530000 128d2004 15832004 (e7875106) [ 36.713225] ---[ end trace cb88537fdc8fa228 ]--- [ 36.713227] Kernel panic - not syncing: Fatal exception in interrupt [ 48.481581] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 01:32]: got exception: panic ~$off

[PYBOOT] [omap5uevm 01:33]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.657227] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667772] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674250] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679673] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.688145] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699968] mmc2: switch to bus width 8 failed [ 1.704521] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.711157] mmc2: switch to bus width 4 failed [ 1.715668] mmc2: new high speed MMC card at address 0001 [ 1.716009] hub 3-0:1.0: USB hub found [ 1.716062] hub 3-0:1.0: 1 port detected [ 1.729907] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.730904] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.730907] [drm] No driver support for vblank timestamp query. [ 1.750595] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.757196] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.764548] mmcblk2: p3 [ 1.786299] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.794275] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.797151] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.804525] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.823691] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.828093] mmc0: new SDIO card at address 0001 [ 1.851796] Console: switching to colour frame buffer device 170x48 [ 1.907021] drm drm: fb0: frame buffer device [ 1.923574] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.930348] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.937426] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.951721] vdd_1v5: disabling [ 1.954805] vdd_1v2: disabling [ 2.571891] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.583340] Waiting for root device /dev/mmcblk0p3... [ 58.583242] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:56]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:57]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.606915] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.613252] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.623163] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.629612] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.635023] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.642777] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.658117] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.664611] hub 3-0:1.0: USB hub found [ 1.668450] hub 3-0:1.0: 1 port detected [ 1.673370] mmc2: switch to bus width 8 failed [ 1.681644] mmc2: switch to bus width 4 failed [ 1.686114] mmc2: new high speed MMC card at address 0001 [ 1.691885] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.696612] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.702629] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.709837] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.716456] [drm] No driver support for vblank timestamp query. [ 1.723695] mmcblk2: p3 [ 1.749440] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.757004] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.759736] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.766678] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.784825] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.787662] mmc0: new SDIO card at address 0001 [ 1.810973] Console: switching to colour frame buffer device 170x48 [ 1.860503] drm drm: fb0: frame buffer device [ 1.864942] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.871284] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.878141] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.889730] vdd_1v5: disabling [ 1.892779] vdd_1v2: disabling [ 2.552327] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.563184] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.660057] Bluetooth: RFCOMM ver 1.11 [ 1.663884] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.669217] Bluetooth: BNEP socket layer initialized [ 1.674207] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.680152] Bluetooth: HIDP socket layer initialized [ 1.685730] Key type dns_resolver registered [ 1.691205] Registering SWP/SWPB emulation handler [ 1.706908] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.713688] VDDIO_HDMI: supplied by vdd_5v0 [ 1.718144] vdd_sys: supplied by vdd_5v0 [ 1.722187] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.727140] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.733729] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.744226] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.750684] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.756748] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.764739] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.781412] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.789797] hub 3-0:1.0: USB hub found [ 1.793606] hub 3-0:1.0: 1 port detected [ 1.805037] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.811724] [drm] No driver support for vblank timestamp query. [ 1.907327] Console: switching to colour frame buffer device 170x48 [ 1.927104] drm drm: fb0: frame buffer device [ 1.961402] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.968677] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.976713] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.996739] vdd_1v5: disabling [ 1.999804] vdd_1v2: disabling [ 2.003008] ALSA device list: [ 2.005968] #0: NVIDIA Tegra Seaboard [ 2.312161] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.323426] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:46]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:47]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.128772] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.137131] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.171540] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:12]: got exception: timeout ~$off

[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.897949] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905456] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911682] usbcore: registered new interface driver usbhid [ 1.917266] usbhid: USB HID core driver [ 1.924499] NET: Registered protocol family 10 [ 1.979827] sit: IPv6 over IPv4 tunneling driver [ 1.985015] NET: Registered protocol family 17 [ 1.989471] can: controller area network core (rev 20120528 abi 9) [ 1.995697] NET: Registered protocol family 29 [ 2.000152] can: raw protocol (rev 20120528) [ 2.004425] can: broadcast manager protocol (rev 20120528 t) [ 2.010101] can: netlink gateway (rev 20130117) max_hops=1 [ 2.016021] Key type dns_resolver registered [ 2.020477] ThumbEE CPU extension supported. [ 2.074829] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089508] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098571] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105590] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112548] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119537] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131225] db8500-esram12: disabling [ 2.179016] db8500-esram34: disabling [ 2.199768] V-CSI/DSI: disabling [ 2.208984] mmci-reg: disabling [ 2.212585] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.218536] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.239715] Waiting for root device /dev/mmcblk0p4... [ 3.041809] mmc3: new high speed MMC card at address 0001 [ 3.054626] mmcblk3: mmc3:0001 3.53 GiB [ 3.063781] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.074310] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.083801] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.095642] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:58]: got exception: timeout ~$off

[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.727294] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.738311] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.754913] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.765777] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.802612] NET: Registered protocol family 10 [ 2.820098] sit: IPv6 over IPv4 tunneling driver [ 2.827728] NET: Registered protocol family 17 [ 2.832702] NET: Registered protocol family 35 [ 2.837249] NET: Registered protocol family 37 [ 2.841827] Registering SWP/SWPB emulation handler [ 2.858764] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.865234] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.872039] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.879272] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-14 23:14:50 UTC (955754090) [ 2.888580] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.895660] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.902679] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.909667] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.923248] db8500-esram12: disabling [ 2.927062] db8500-esram34: disabling [ 2.931060] V-CSI/DSI: disabling [ 2.934326] mmci-reg: disabling [ 2.937622] ALSA device list: [ 2.940582] #0: MOP500-card [ 2.943969] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.949920] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.956146] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done.