Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160519/
Failed boards:
arndale arm-exynos_defconfig : FAILED 1:02.70 arndale arm-multi_v7_defconfig : FAILED 1:11.51 arndale arm-multi_lpae_defconfig : FAILED 1:22.13 arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.74 bbb arm-multi_v7_defconfig : FAILED 1:52.66 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 0:55.46 beagleboard-x15 arm-multi_v7_defconfig : FAILED 0:57.04 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:01.76 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri arm-bcm_defconfig : FAILED 1:44.69 capri arm-multi_v7_defconfig : FAILED 1:49.36 capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED chitra powerpc-ppc64_defconfig : FAILED 1:57.59 colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 1:17.76 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:54.55 dalmore arm-multi_v7_defconfig : FAILED 1:57.69 dalmore arm-multi_lpae_defconfig : FAILED 1:56.28 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard arm-imx_v6_v7_defconfig : FAILED 1:02.63 hummingboard arm-multi_v7_defconfig : FAILED 1:00.93 hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:57.95 omap5uevm arm-multi_v7_defconfig : FAILED 0:48.51 omap5uevm arm-multi_lpae_defconfig : FAILED 0:53.46 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes arm-omap2plus_defconfig : FAILED 2:30.46 pandaes arm-multi_v7_defconfig : FAILED 2:19.71 pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:48.25 pi arm-multi_v7_defconfig : FAILED 2:03.32 pi arm-multi_lpae_defconfig : FAILED 1:52.49 pi multi_v7_nosmp_defconfig : NO BUILD pit arm-exynos_defconfig : FAILED 1:49.88 pit arm-multi_v7_defconfig : FAILED 1:58.39 pit arm-multi_lpae_defconfig : FAILED 1:52.65 pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:55.94 seaboard arm-multi_v7_defconfig : FAILED 1:55.16 seaboard multi_v7_nosmp_defconfig : NO BUILD snow arm-exynos_defconfig : FAILED 2:04.46 snow arm-multi_v7_defconfig : FAILED 2:06.62 snow arm-multi_lpae_defconfig : FAILED 2:05.72 snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 2:02.04 snowball arm-multi_v7_defconfig : FAILED 2:20.60 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 0:59.66 wandboard arm-multi_v7_defconfig : FAILED 1:04.38 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:25.27 colombus arm-sunxi_defconfig : passed 2:20.40 colombus arm-multi_v7_defconfig : passed 2:36.80 colombus arm-multi_lpae_defconfig : passed 2:37.90 cosmic arm-multi_v7_defconfig : passed 2:59.35 cubie arm-sunxi_defconfig : passed 0:56.52 cubie arm-multi_v7_defconfig : passed 0:49.71 cubie2 arm-sunxi_defconfig : passed 0:55.88 cubie2 arm-multi_v7_defconfig : passed 0:56.04 cubie2 arm-multi_lpae_defconfig : passed 0:55.37 cubox arm-multi_v7_defconfig : passed 1:12.69 cubox arm-mvebu_v7_defconfig : passed 1:09.25 jetsontk1 arm-tegra_defconfig : warnings 0:51.82 jetsontk1 arm-multi_v7_defconfig : warnings 0:51.07 jetsontk1 arm-multi_lpae_defconfig : warnings 0:57.68 omap5uevm arm-omap2plus_defconfig : passed 1:05.68 seattle arm64-defconfig : passed 2:24.85 trimslice arm-tegra_defconfig : warnings 2:18.73 trimslice arm-multi_v7_defconfig : warnings 1:34.38
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:11.57 beaver arm-multi_v7_defconfig : OFFLINE 2:17.87 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.51 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.37 parallella arm-multi_v7_defconfig : OFFLINE 2:24.87 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:47.02 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.47 sama5 arm-sama5_defconfig : OFFLINE 2:26.97 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:14.72 socfpga arm-socfpga_defconfig : OFFLINE 2:25.00 socfpga arm-multi_v7_defconfig : OFFLINE 2:13.98
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-arm-exynos_defconfig failure log: -------------------------------------------------
[ 4.017683] EXT4-fs (mmcblk0p1): recovery complete [ 4.021004] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.029195] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.035836] devtmpfs: error mounting -2 [ 4.039520] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [ 4.045490] Kernel panic - n [PYBOOT] [arndale 00:59]: kernel: finished booting, starting userspace. ot syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 4.058408] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-next-20160519 #1 [ 4.065435] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 4.071528] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 4.079244] [<c010ad18>] (show_stack) from [<c0327438>] (dump_stack+0x78/0x8c) [ 4.086449] [<c0327438>] (dump_stack) from [<c01974d0>] (panic+0xd8/0x250) [ 4.093308] [<c01974d0>] (panic) from [<c06d1d8c>] (kernel_init+0x104/0x114) [ 4.100336] [<c06d1d8c>] (kernel_init) from [<c0107778>] (ret_from_fork+0x14/0x3c) [ 4.107898] CPU1: stopping [ 4.110578] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.6.0-next-20160519 #1 [ 4.117604] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 4.123693] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 4.131411] [<c010ad18>] (show_stack) from [<c0327438>] (dump_stack+0x78/0x8c) [ 4.138614] [<c0327438>] (dump_stack) from [<c010d2a8>] (handle_IPI+0x198/0x1ac) [ 4.145992] [<c010d2a8>] (handle_IPI) from [<c010150c>] (gic_handle_irq+0x94/0x98) [ 4.153544] [<c010150c>] (gic_handle_irq) from [<c010b7d4>] (__irq_svc+0x54/0x90) [ 4.161005] Exception stack(0xee89df68 to 0xee89dfb0) [ 4.166042] df60: 00000000 c0b2cd70 00000001 00000050 f4d95405 00000000 [ 4.174202] df80: f1d1e353 00000000 eefb9400 c0b2cd70 00000000 00000000 05355555 ee89dfb8 [ 4.182359] dfa0: c05166f0 c0516764 60000013 ffffffff [ 4.187399] [<c010b7d4>] (__irq_svc) from [<c0516764>] (cpuidle_enter_state+0x1f4/0x24c) [ 4.195473] [<c0516764>] (cpuidle_enter_state) from [<c0153010>] (cpu_startup_entry+0x190/0x238) [ 4.204237] [<c0153010>] (cpu_startup_entry) from [<401015ac>] (0x401015ac) [ 4.211185] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 4.316977] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci [ 4.433533] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610 [ 4.438942] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.456975] usb 1-3.2: Product: USB2.0 Hub
[PYBOOT] [arndale 01:00]: got exception: panic ~$off
[PYBOOT] [arndale 01:02]: Done.
========================================================================
Board arndale-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.265436] [<c030b9b0>] (show_stack) from [<c0592114>] (dump_stack+0x88/0x9c) [ 2.265447] [<c0592114>] (dump_stack) from [<c03cbc8c>] (panic+0xd8/0x264) [ 2.265458] [<c03cbc8c>] (panic) from [<c0b8482c>] (kernel_init+0x104/0x114) [ 2.265468] [<c0b8482c>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c) [ 2.269701] CPU1: stopping [ 2.269707] CPU: 1 PID: 16 Comm: kworker/1:0 Not tainted 4.6.0-next-20160519 #1 [ 2.269710] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.269722] Workqueue: events_freezable mmc_rescan [ 2.269732] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.269741] [<c030b9b0>] (show_stack) from [<c0592114>] (dump_stack+0x88/0x9c) [ 2.269749] [<c0592114>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.269757] [<c030eb3c>] (handle_IPI) from [<c03017e0>] (gic_handle_irq+0x94/0x98) [ 2.269763] [<c03017e0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.269767] Exception stack(0xee0afc98 to 0xee0afce0) [ 2.269772] fc80: c13a208c 0000000a [ 2.269779] fca0: f090a000 60000013 000000f3 00000000 00000006 00000033 c1433a30 00000006 [ 2.269785] fcc0: 00000000 000000f2 00000001 ee0afce8 000f0000 c0383bc0 60000013 ffffffff [ 2.269793] [<c030c514>] (__irq_svc) from [<c0383bc0>] (console_unlock+0x3d4/0x5bc) [ 2.269800] [<c0383bc0>] (console_unlock) from [<c0384030>] (vprintk_emit+0x288/0x510) [ 2.269807] [<c0384030>] (vprintk_emit) from [<c03843e0>] (vprintk_default+0x20/0x28) [ 2.269813] [<c03843e0>] (vprintk_default) from [<c03cbeb8>] (printk+0x2c/0x3c) [ 2.269822] [<c03cbeb8>] (printk) from [<c09d9e84>] (mmc_blk_probe+0xfc/0x2e0) [ 2.269832] [<c09d9e84>] (mmc_blk_probe) from [<c078e4f8>] (driver_probe_device+0x208/0x2b4) [ 2.269840] [<c078e4f8>] (driver_probe_device) from [<c078c918>] (bus_for_each_drv+0x60/0x94) [ 2.269847] [<c078c918>] (bus_for_each_drv) from [<c078e210>] (__device_attach+0xb0/0x114) [ 2.269854] [<c078e210>] (__device_attach) from [<c078d6f4>] (bus_probe_device+0x84/0x8c) [ 2.269862] [<c078d6f4>] (bus_probe_device) from [<c078ba6c>] (device_add+0x36c/0x568) [ 2.269871] [<c078ba6c>] (device_add) from [<c09cd5c0>] (mmc_add_card+0x118/0x268) [ 2.269879] [<c09cd5c0>] (mmc_add_card) from [<c09d0754>] (mmc_attach_mmc+0xa8/0x15c) [ 2.269886] [<c09d0754>] (mmc_attach_mmc) from [<c09cce78>] (mmc_rescan+0x2a8/0x348) [ 2.269894] [<c09cce78>] (mmc_rescan) from [<c035761c>] (process_one_work+0x1ec/0x410) [ 2.269903] [<c035761c>] (process_one_work) from [<c0358288>] (worker_thread+0x38/0x594) [ 2.269911] [<c0358288>] (worker_thread) from [<c035d04c>] (kthread+0xdc/0xf4) [ 2.269920] [<c035d04c>] (kthread) from [<c0307d78>] (ret_from_fork+0x14/0x3c) [ 2.552495] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[PYBOOT] [arndale 01:19]: got exception: panic ~$off
[PYBOOT] [arndale 01:21]: Done.
========================================================================
Board arndale-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.252628] [<c030b9b0>] (show_stack) from [<c0592114>] (dump_stack+0x88/0x9c) [ 2.252638] [<c0592114>] (dump_stack) from [<c03cbc8c>] (panic+0xd8/0x264) [ 2.252650] [<c03cbc8c>] (panic) from [<c0b8482c>] (kernel_init+0x104/0x114) [ 2.252661] [<c0b8482c>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c) [ 2.256896] CPU1: stopping [ 2.256902] CPU: 1 PID: 16 Comm: kworker/1:0 Not tainted 4.6.0-next-20160519 #1 [ 2.256905] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.256917] Workqueue: events_freezable mmc_rescan [ 2.256927] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.256937] [<c030b9b0>] (show_stack) from [<c0592114>] (dump_stack+0x88/0x9c) [ 2.256946] [<c0592114>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.256954] [<c030eb3c>] (handle_IPI) from [<c03017e0>] (gic_handle_irq+0x94/0x98) [ 2.256960] [<c03017e0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.256964] Exception stack(0xee0afc98 to 0xee0afce0) [ 2.256969] fc80: c13a208c 0000000a [ 2.256976] fca0: f090a000 60000013 000000f3 00000000 00000006 00000033 c1433a30 00000006 [ 2.256982] fcc0: 00000000 000000f2 00000001 ee0afce8 000f0000 c0383bc0 60000013 ffffffff [ 2.256990] [<c030c514>] (__irq_svc) from [<c0383bc0>] (console_unlock+0x3d4/0x5bc) [ 2.256997] [<c0383bc0>] (console_unlock) from [<c0384030>] (vprintk_emit+0x288/0x510) [ 2.257004] [<c0384030>] (vprintk_emit) from [<c03843e0>] (vprintk_default+0x20/0x28) [ 2.257011] [<c03843e0>] (vprintk_default) from [<c03cbeb8>] (printk+0x2c/0x3c) [ 2.257020] [<c03cbeb8>] (printk) from [<c09d9e84>] (mmc_blk_probe+0xfc/0x2e0) [ 2.257031] [<c09d9e84>] (mmc_blk_probe) from [<c078e4f8>] (driver_probe_device+0x208/0x2b4) [ 2.257040] [<c078e4f8>] (driver_probe_device) from [<c078c918>] (bus_for_each_drv+0x60/0x94) [ 2.257047] [<c078c918>] (bus_for_each_drv) from [<c078e210>] (__device_attach+0xb0/0x114) [ 2.257054] [<c078e210>] (__device_attach) from [<c078d6f4>] (bus_probe_device+0x84/0x8c) [ 2.257064] [<c078d6f4>] (bus_probe_device) from [<c078ba6c>] (device_add+0x36c/0x568) [ 2.257072] [<c078ba6c>] (device_add) from [<c09cd5c0>] (mmc_add_card+0x118/0x268) [ 2.257081] [<c09cd5c0>] (mmc_add_card) from [<c09d0754>] (mmc_attach_mmc+0xa8/0x15c) [ 2.257088] [<c09d0754>] (mmc_attach_mmc) from [<c09cce78>] (mmc_rescan+0x2a8/0x348) [ 2.257097] [<c09cce78>] (mmc_rescan) from [<c035761c>] (process_one_work+0x1ec/0x410) [ 2.257105] [<c035761c>] (process_one_work) from [<c0358288>] (worker_thread+0x38/0x594) [ 2.257114] [<c0358288>] (worker_thread) from [<c035d04c>] (kthread+0xdc/0xf4) [ 2.257124] [<c035d04c>] (kthread) from [<c0307d78>] (ret_from_fork+0x14/0x3c) [ 2.539689] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[PYBOOT] [arndale 01:09]: got exception: panic ~$off
[PYBOOT] [arndale 01:10]: Done.
========================================================================
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.587595] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.623773] Synopsys Designware Multimedia Card Interface Driver [ 1.631655] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641642] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648689] usbcore: registered new interface driver usbhid [ 1.654613] usbhid: USB HID core driver [ 1.666664] NET: Registered protocol family 10 [ 1.673423] sit: IPv6 over IPv4 tunneling driver [ 1.679619] NET: Registered protocol family 17 [ 1.684374] can: controller area network core (rev 20120528 abi 9) [ 1.691025] NET: Registered protocol family 29 [ 1.695728] can: raw protocol (rev 20120528) [ 1.700235] can: broadcast manager protocol (rev 20120528 t) [ 1.706208] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712936] Key type dns_resolver registered [ 1.717820] omap_voltage_late_init: Voltage driver support not added [ 1.724774] ThumbEE CPU extension supported. [ 1.729326] Registering SWP/SWPB emulation handler [ 1.738923] mmc0: new high speed MMC card at address 0001 [ 1.749992] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.757924] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.765678] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.773421] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.780766] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.788329] mmcblk0: mmc0:0001 MMC02G 1.79 GiB [ 1.793789] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB [ 1.800491] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB [ 1.810710] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819160] mmcblk0: p1 p2 [ 1.848558] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.854335] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.861297] hctosys: unable to open rtc device (rtc0) [ 1.874455] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [bbb 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:50]: got exception: timeout ~$off
[PYBOOT] [bbb 01:52]: Done.
========================================================================
Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 1.995439] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.000286] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp [ 2.006631] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup [ 2.013514] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' [ 2.023112] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' [ 2.032623] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup [ 2.039642] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed [ 2.083026] ledtrig-cpu: registered to indicate activity on CPUs [ 2.091891] oprofile: using arm/armv7 [ 2.096789] Initializing XFRM netlink socket [ 2.102080] NET: Registered protocol family 10 [ 2.117435] sit: IPv6 over IPv4 tunneling driver [ 2.126741] NET: Registered protocol family 17 [ 2.131656] NET: Registered protocol family 15 [ 2.136872] Key type dns_resolver registered [ 2.141717] omap_voltage_late_init: Voltage driver support not added [ 2.148386] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.156916] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.166471] ThumbEE CPU extension supported. [ 2.171095] Registering SWP/SWPB emulation handler [ 2.176115] SmartReflex Class3 initialized [ 2.185939] mmc0: new high speed MMC card at address 0001 [ 2.214996] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.223456] mmcblk0: mmc0:0001 MMC02G 1.79 GiB [ 2.230515] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB [ 2.245945] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB [ 2.258884] mmcblk0: p1 p2 [ 2.303774] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.309511] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.317692] hctosys: unable to open rtc device (rtc0) [ 2.323124] sr_init: No PMIC hook to init smartreflex [ 2.328827] sr_init: platform driver register failed for SR [ 2.368976] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done.
========================================================================
Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ######################## 2.4 MiB/s done Bytes transferred = 7020408 (6b1f78 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/beagleboard-x15-6vYsu_/am57xx-beagle-x15.dtb tftp 0x82000000 tmp/beagleboard-x15-6vYsu_/am57xx-beagle-x15.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.20.2; our IP address is 172.16.20.126 Filename 'tmp/beagleboard-x15-6vYsu_/am57xx-beagle-x15.dtb'. Load address: 0x82000000 Loading: *###### 2.3 MiB/s done Bytes transferred = 85516 (14e0c hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000
[PYBOOT] [beagleboard-x15 00:22]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x6b1f78 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8ffe8000, end 8ffffe0b ... OK
Starting kernel ...
[PYBOOT] [beagleboard-x15 00:23]: u-boot: started kernel.
[PYBOOT] [beagleboard-x15 00:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 00:59]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:00]: Done.
========================================================================
Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ######################## 2.5 MiB/s done Bytes transferred = 7020416 (6b1f80 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/beagleboard-x15-EynEq1/am57xx-beagle-x15.dtb tftp 0x82000000 tmp/beagleboard-x15-EynEq1/am57xx-beagle-x15.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.20.2; our IP address is 172.16.20.126 Filename 'tmp/beagleboard-x15-EynEq1/am57xx-beagle-x15.dtb'. Load address: 0x82000000 Loading: *###### 2.4 MiB/s done Bytes transferred = 85516 (14e0c hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000
[PYBOOT] [beagleboard-x15 00:19]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x6b1f80 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8ffe8000, end 8ffffe0b ... OK
Starting kernel ...
[PYBOOT] [beagleboard-x15 00:19]: u-boot: started kernel.
[PYBOOT] [beagleboard-x15 00:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 00:55]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 00:56]: Done.
========================================================================
Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# # 2.4 MiB/s done Bytes transferred = 3819864 (3a4958 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/beagleboard-x15-VLHLLQ/am57xx-beagle-x15.dtb tftp 0x82000000 tmp/beagleboard-x15-VLHLLQ/am57xx-beagle-x15.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.20.2; our IP address is 172.16.20.126 Filename 'tmp/beagleboard-x15-VLHLLQ/am57xx-beagle-x15.dtb'. Load address: 0x82000000 Loading: *###### 2.3 MiB/s done Bytes transferred = 85516 (14e0c hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000
[PYBOOT] [beagleboard-x15 00:17]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3a4958 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8ffe8000, end 8ffffe0b ... OK
Starting kernel ...
[PYBOOT] [beagleboard-x15 00:17]: u-boot: started kernel.
[PYBOOT] [beagleboard-x15 00:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 00:53]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 00:55]: Done.
========================================================================
Board capri-arm-bcm_defconfig failure log: -------------------------------------------------
[ 0.540000] mmc0: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.560000] iosr1: voltage operation not allowed [ 0.560000] mmc1: Switching to 3.3V signalling voltage failed [ 0.600000] mmc1: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.600000] NET: Registered protocol family 10 [ 0.600000] sit: IPv6 over IPv4 tunneling driver [ 0.610000] NET: Registered protocol family 17 [ 0.620000] NET: Registered protocol family 15 [ 0.620000] ThumbEE CPU extension supported. [ 0.620000] Registering SWP/SWPB emulation handler [ 0.650000] mmcldo1: disabling [ 0.650000] mmcldo2: disabling [ 0.650000] csr: disabling [ 0.660000] iosr2: disabling [ 0.660000] msr: disabling [ 0.660000] sdsr1: disabling [ 0.660000] sdsr2: disabling [ 0.660000] vsr: disabling [ 0.660000] gpldo1: disabling [ 0.670000] gpldo2: disabling [ 0.670000] gpldo3: disabling [ 0.670000] gpldo4: disabling [ 0.670000] gpldo5: disabling [ 0.670000] gpldo6: disabling [ 0.680000] ttyS0 - failed to request DMA [ 0.680000] Waiting for root device /dev/mmcblk0p8... [ 0.700000] mmc1: new high speed MMC card at address 0001 [ 0.700000] mmcblk1: mmc1:0001 016G4A 14.8 GiB [ 0.700000] mmcblk1boot0: mmc1:0001 016G4A partition 1 2.00 MiB [ 0.700000] mmcblk1boot1: mmc1:0001 016G4A partition 2 2.00 MiB [ 0.710000] mmcblk1rpmb: mmc1:0001 016G4A partition 3 256 KiB [ 0.710000] Alternate GPT is invalid, using primary GPT. [ 0.710000] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
[PYBOOT] [capri 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [capri 01:43]: got exception: timeout ~$off
[PYBOOT] [capri 01:44]: Done.
========================================================================
Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.565000] can: controller area network core (rev 20120528 abi 9) [ 0.570000] NET: Registered protocol family 29 [ 0.570000] can: raw protocol (rev 20120528) [ 0.570000] can: broadcast manager protocol (rev 20120528 t) [ 0.575000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.575000] Key type dns_resolver registered [ 0.580000] ThumbEE CPU extension supported. [ 0.580000] Registering SWP/SWPB emulation handler [ 0.590000] hctosys: unable to open rtc device (rtc0) [ 0.605000] mmcldo1: disabling [ 0.610000] mmcldo2: disabling [ 0.615000] csr: disabling [ 0.615000] iosr2: disabling [ 0.615000] msr: disabling [ 0.620000] sdsr1: disabling [ 0.620000] sdsr2: disabling [ 0.625000] vsr: disabling [ 0.625000] gpldo1: disabling [ 0.625000] gpldo2: disabling [ 0.630000] gpldo3: disabling [ 0.630000] gpldo4: disabling [ 0.630000] gpldo5: disabling [ 0.635000] gpldo6: disabling [ 0.635000] ttyS0 - failed to request DMA [ 0.640000] Waiting for root device /dev/mmcblk0p8... [ 0.655000] mmc1: new high speed MMC card at address 0001 [ 0.655000] mmcblk1: mmc1:0001 016G4A 14.8 GiB [ 0.660000] mmcblk1boot0: mmc1:0001 016G4A partition 1 2.00 MiB [ 0.660000] mmcblk1boot1: mmc1:0001 016G4A partition 2 2.00 MiB [ 0.665000] mmcblk1rpmb: mmc1:0001 016G4A partition 3 256 KiB [ 0.665000] Alternate GPT is invalid, using primary GPT. [ 0.670000] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 [ 38.840000] random: nonblocking pool is initialized
[PYBOOT] [capri 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [capri 01:47]: got exception: timeout ~$off
[PYBOOT] [capri 01:48]: Done.
========================================================================
Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
Building dt strings... Building dt structure... Device tree strings 0x00000000013a5000 -> 0x00000000013a53e3 Device tree struct 0x00000000013a6000 -> 0x00000000013aa000 Quiescing Open Firmware ... Booting Linux via __start() ... CPU maps initialized for 1 thread per core (thread shift is 0) Freed 28672 bytes for unused pacas -> smp_release_cpus() spinning_secondaries = 0 <- smp_release_cpus() Starting Linux ppc64 #1 SMP Wed May 18 23:50:53 PDT 2016 ----------------------------------------------------- ppc64_pft_size = 0x0 phys_mem_size = 0x100000000 dcache_line_size = 0x40 icache_line_size = 0x40 cpu_features = 0x0800020018500048 possible = 0x3fffffff18500649 always = 0x0000000018100040 cpu_user_features = 0xdc000802 0x00000000 mmu_features = 0x6e000001 firmware_features = 0x0000000000000000 htab_address = 0xc00000017c000000 htab_hash_mask = 0x7ffff ----------------------------------------------------- <- setup_system() Linux version 4.6.0-next-20160519 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 SMP Wed May 18 23:50:53 PDT 2016 Top of RAM: 0x180000000, Total RAM: 0x100000000 Memory hole size: 2048MB numa: Initmem setup node 0 [mem 0x00000000-0x17fffffff] numa: NODE_DATA [mem 0x17bfd1b00-0x17bfdbfff]
[PYBOOT] [chitra 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 01:55]: got exception: timeout ~$off
[PYBOOT] [chitra 01:57]: Done.
========================================================================
Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
=> setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 => tftp 0x84000000 tmp/cosmic-tZ9WF3/vf610-cosmic.dtb tftp 0x84000000 tmp/cosmic-tZ9WF3/vf610-cosmic.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.114 Filename 'tmp/cosmic-tZ9WF3/vf610-cosmic.dtb'. Load address: 0x84000000 Loading: *## 699.2 KiB/s done Bytes transferred = 15773 (3d9d hex) => bootm ${loadaddr} - 0x84000000
[PYBOOT] [cosmic 00:32]: u-boot: jumping to kernel image bootm ${loadaddr} - 0x84000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6571072 Bytes = 6.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 84000000 Booting using the fdt blob at 0x84000000 Loading Kernel Image ... OK Using Device Tree in place at 84000000, end 84006d9c Using machid 0xffffffff from environment
Starting kernel ...
[PYBOOT] [cosmic 00:40]: u-boot: started kernel.
[PYBOOT] [cosmic 01:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:16]: got exception: timeout ~$off
[PYBOOT] [cosmic 01:17]: Done.
========================================================================
Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.833285] can: broadcast manager protocol (rev 20120528 t) [ 2.839086] can: netlink gateway (rev 20130117) max_hops=1 [ 2.846160] Key type dns_resolver registered [ 2.853515] ThumbEE CPU extension supported. [ 2.857907] Registering SWP/SWPB emulation handler [ 2.873229] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.878769] mmc0: new high speed MMC card at address 0001 [ 2.887911] mmcblk0: mmc0:0001 SEM32G 29.1 GiB [ 2.890355] usb2_vbus: supplied by vdd-sys-5v0 [ 2.893854] usb1_vbus: supplied by vdd-sys-5v0 [ 2.905592] mmcblk0boot0: mmc0:0001 SEM32G partition 1 4.00 MiB [ 2.915500] mmcblk0boot1: mmc0:0001 SEM32G partition 2 4.00 MiB [ 2.918864] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.918876] [drm] No driver support for vblank timestamp query. [ 2.936770] mmcblk0rpmb: mmc0:0001 SEM32G partition 3 4.00 MiB [ 2.947225] mmcblk0: p1 [ 3.089391] Console: switching to colour frame buffer device 240x75 [ 3.176591] drm drm: fb0: frame buffer device [ 3.197260] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.212553] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.218145] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.226893] tegra-ehci 7d008000.usb: irq 22, io mem 0x7d008000 [ 3.242168] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.252559] hub 1-0:1.0: USB hub found [ 3.256574] hub 1-0:1.0: 1 port detected [ 3.267297] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.279313] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.334476] vdd_cam_1v8_reg: disabling [ 3.338380] usb1_vbus: disabling [ 3.341678] dvdd_ts: disabling [ 3.348259] Waiting for root device /dev/mmcblk1p1... [ 3.567258] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.529055] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:55]: Done.
========================================================================
Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.849401] can: netlink gateway (rev 20130117) max_hops=1 [ 2.856523] Key type dns_resolver registered [ 2.862926] ThumbEE CPU extension supported. [ 2.867323] Registering SWP/SWPB emulation handler [ 2.883715] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.898132] usb2_vbus: supplied by vdd-sys-5v0 [ 2.906828] usb1_vbus: supplied by vdd-sys-5v0 [ 2.911746] mmc0: new high speed MMC card at address 0001 [ 2.921867] mmcblk0: mmc0:0001 SEM32G 29.1 GiB [ 2.930577] mmcblk0boot0: mmc0:0001 SEM32G partition 1 4.00 MiB [ 2.933106] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.933119] [drm] No driver support for vblank timestamp query. [ 2.952815] mmcblk0boot1: mmc0:0001 SEM32G partition 2 4.00 MiB [ 2.962550] mmcblk0rpmb: mmc0:0001 SEM32G partition 3 4.00 MiB [ 2.972636] mmcblk0: p1 [ 3.104444] Console: switching to colour frame buffer device 240x75 [ 3.191637] drm drm: fb0: frame buffer device [ 3.211166] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.226475] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.232071] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.240971] tegra-ehci 7d008000.usb: irq 22, io mem 0x7d008000 [ 3.256130] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.266374] hub 1-0:1.0: USB hub found [ 3.270380] hub 1-0:1.0: 1 port detected [ 3.281242] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.296267] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.359336] vdd_cam_1v8_reg: disabling [ 3.363258] usb1_vbus: disabling [ 3.366570] dvdd_ts: disabling [ 3.373500] Waiting for root device /dev/mmcblk1p1... [ 3.581208] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.541236] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.036154] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:56]: Done.
========================================================================
Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.402227] Bluetooth: RFCOMM socket layer initialized [ 5.407446] Bluetooth: RFCOMM ver 1.11 [ 5.411259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.416735] Bluetooth: BNEP socket layer initialized [ 5.421798] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.427797] Bluetooth: HIDP socket layer initialized [ 5.434133] Key type dns_resolver registered [ 5.443554] Registering SWP/SWPB emulation handler [ 5.455503] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.471039] usb2_vbus: supplied by vdd-sys-5v0 [ 5.481246] usb1_vbus: supplied by vdd-sys-5v0 [ 5.515426] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.522186] [drm] No driver support for vblank timestamp query. [ 5.702055] Console: switching to colour frame buffer device 240x75 [ 5.789516] drm drm: fb0: frame buffer device [ 5.821979] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.831253] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.837113] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.847400] tegra-ehci 7d008000.usb: irq 22, io mem 0x7d008000 [ 5.871985] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.886058] hub 1-0:1.0: USB hub found [ 5.890132] hub 1-0:1.0: 1 port detected [ 5.904069] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.919235] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.006736] vdd_cam_1v8_reg: disabling [ 6.010542] usb1_vbus: disabling [ 6.013933] dvdd_ts: disabling [ 6.017816] ALSA device list: [ 6.020807] #0: NVIDIA Tegra Dalmore [ 6.026625] Waiting for root device /dev/mmcblk1p1... [ 6.211978] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.246850] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.791941] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done.
========================================================================
Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3.5 MiB/s done Bytes transferred = 6571072 (644440 hex) C1 U-Boot > setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 C1 U-Boot > tftp 0x18000000 tmp/hummingboard-CM2aXv/imx6dl-hummingboard.dtb tftp 0x18000000 tmp/hummingboard-CM2aXv/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.118 Filename 'tmp/hummingboard-CM2aXv/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *### 2.6 MiB/s done Bytes transferred = 32363 (7e6b hex) C1 U-Boot > bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [hummingboard 00:24]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x644440 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae6a
Starting kernel ...
[PYBOOT] [hummingboard 00:24]: u-boot: started kernel.
[PYBOOT] [hummingboard 00:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 01:00]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:02]: Done.
========================================================================
Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ######################## 3.5 MiB/s done Bytes transferred = 7020416 (6b1f80 hex) C1 U-Boot > setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 C1 U-Boot > tftp 0x18000000 tmp/hummingboard-Zx1iFx/imx6dl-hummingboard.dtb tftp 0x18000000 tmp/hummingboard-Zx1iFx/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.118 Filename 'tmp/hummingboard-Zx1iFx/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *### 2.8 MiB/s done Bytes transferred = 32363 (7e6b hex) C1 U-Boot > bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [hummingboard 00:23]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x6b1f80 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae6a
Starting kernel ...
[PYBOOT] [hummingboard 00:23]: u-boot: started kernel.
[PYBOOT] [hummingboard 00:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 00:59]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:00]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.910086] NET: Registered protocol family 10 [ 1.910670] sit: IPv6 over IPv4 tunneling driver [ 1.917750] NET: Registered protocol family 17 [ 1.918715] NET: Registered protocol family 15 [ 1.923170] Key type dns_resolver registered [ 1.928000] Registering SWP/SWPB emulation handler [ 1.935453] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.939993] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.947482] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.954632] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.961217] [drm] No driver support for vblank timestamp query. [ 1.967126] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.973535] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.978661] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.985863] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.994466] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.004296] mmc1: new DDR MMC card at address 0001 [ 2.009127] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 2.013492] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.019354] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.025257] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.025263] max98090 1-0010: MAX98090 REVID=0x43 [ 2.036282] mmcblk1: p1 p2 [ 20.105328] max98090 1-0010: use default 2.8v micbias [ 28.109346] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 32.106724] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 32.140790] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:49 UTC (946688449) [ 32.157367] VDD10_HDMI_1.0V: disabling [ 32.158029] vdd_g3d: disabling [ 32.159102] BUCK8_2.8V: disabling [ 32.163059] ALSA device list: [ 32.164755] #0: Odroid-U3 [ 32.168399] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:53]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:55]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.496606] r10: 8d4fdf3b r9 : 00000801 r8 : 00000214 [ 2.502037] r7 : 00000005 r6 : c0317d84 r5 : 00000000 r4 : c13021b8 [ 2.508837] r3 : ffffe000 r2 : c1302000 r1 : 00000005 r0 : 00000214 [ 2.515638] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.523159] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.529144] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.535400] Stack: (0xc13020c8 to 0xc1302000) [ 2.539935] [<c0317998>] (do_page_fault) from [<c03012d0>] (do_DataAbort+0x3c/0xb8) [ 2.547909] [<c03012d0>] (do_DataAbort) from [<c030c4a0>] (__dabt_svc+0x40/0x60) [ 2.555610] Exception stack(0xc13021b8 to 0xc1302200) [ 2.560867] 21a0: 000004a8 00000005 [ 2.569388] 21c0: c1302000 ffffe000 c13022f8 00000000 c0317d84 00000005 000004a8 00000801 [ 2.577907] 21e0: 8d4fdf3b 83126e97 60000193 c1302208 c03012d0 c0317998 00000193 ffffffff [ 2.586424] [<c030c4a0>] (__dabt_svc) from [<c0317998>] (do_page_fault+0x30/0x384) [ 2.594315] [<c0317998>] (do_page_fault) from [<c03012d0>] (do_DataAbort+0x3c/0xb8) [ 2.602297] [<c03012d0>] (do_DataAbort) from [<c030c4a0>] (__dabt_svc+0x40/0x60) [ 2.609995] Exception stack(0xc13022f8 to 0xc1302340) [ 2.615255] 22e0: c1302374 c03a6140 [ 2.623768] 2300: 00000004 c1302000 ffffe000 00000000 c0319d50 c03a6140 00000001 00000801 [ 2.632282] 2320: 8d4fdf3b 83126e97 00000000 c1302348 00000000 c03d1cbc 60000193 ffffffff [ 2.640806] [<c030c4a0>] (__dabt_svc) from [<c03d1cbc>] (__probe_kernel_read+0x24/0xac) [ 2.649158] [<c03d1cbc>] (__probe_kernel_read) from [<c0319ddc>] (do_alignment+0x8c/0x724) [ 2.657770] [<c0319ddc>] (do_alignment) from [<c03012d0>] (do_DataAbort+0x3c/0xb8) [ 2.665658] [<c03012d0>] (do_DataAbort) from [<c030c4a0>] (__dabt_svc+0x40/0x60) [ 2.673358] Exception stack(0xc13024c0 to 0xc1302508) [ 2.678618] 24c0: 41d785ff 00000000 00000000 00000001 8098f1b6 00000000 0020ebc2 00000000 [ 2.687137] 24e0: 8098f1b6 00000000 8d4fdf3b 83126e97 00000000 c1302514 c03a615c c03a6140 [ 2.695653] 2500: 60000193 ffffffff [ 2.699287] [<c030c4a0>] (__dabt_svc) from [<c03a6140>] (update_ts_time_stats+0x90/0xf8) [ 2.707708] [<c03a6140>] (update_ts_time_stats) from [<00000001>] (0x1) [ 2.714596] Code: e1a08000 e1a07001 e592500c e31c0080 (e5956214) [ 2.720947] ---[ end trace 9da7bb7b541c4cc4 ]--- [ 2.725752] Kernel panic - not syncing: Fatal exception in interrupt [ 3.709212] SMP: failed to stop secondary CPUs [ 3.713839] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:51]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:52]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.240809] r3 : ee099f4c r2 : 00000000 r1 : 00000000 r0 : 41e222cb [ 2.247646] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.255206] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.261220] Process swapper/1 (pid: 0, stack limit = 0xee098220) [ 2.267512] Stack: (0xee099efc to 0xee09a000) [ 2.272070] 9ee0: c03a6eec [ 2.280639] 9f00: 00000000 eefdae40 80adabf5 00000000 8072c0a5 ffffe000 c1302690 ffffe000 [ 2.289199] 9f20: ee099f88 c0346444 c1215280 c0365574 c12134dc 00000001 00000000 ee099f88 [ 2.297774] 9f40: fa212000 fa213000 c1302510 c030eaf0 c1302870 c13405b8 fa21200c ee099f88 [ 2.306337] 9f60: fa212000 c03017e0 c0308780 a0000013 ffffffff ee099fbc c1214580 c1302508 [ 2.314898] 9f80: c140e5e8 c030c514 00000001 00000000 ea000013 f0880000 ee098000 c13024a4 [ 2.323464] 9fa0: 00000000 00000000 c1214580 c1302508 c140e5e8 c1302510 60000013 ee099fd8 [ 2.332027] 9fc0: c032b054 c0308780 a0000013 ffffffff 00000051 c030877c ee098000 c03791e0 [ 2.340587] 9fe0: 00000051 ee099fe0 ae08006a c14106b0 00000000 80301c8c 208141e4 01100020 [ 2.349157] [<c03a615c>] (update_ts_time_stats) from [<ee099f88>] (0xee099f88) [ 2.356717] Code: ee099f88 fa212000 fa213000 c1302510 (c030eaf0) [ 2.363099] ---[ end trace 4658f1ece99dfd6a ]--- [ 2.367935] Kernel panic - not syncing: Fatal exception in interrupt [ 2.374590] CPU0: stopping [ 2.377422] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 4.6.0-next-20160519 #1 [ 2.386076] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.392375] [<c031038c>] (unwind_backtrace) from [<c030b9b0>] (show_stack+0x10/0x14) [ 2.400487] [<c030b9b0>] (show_stack) from [<c0592114>] (dump_stack+0x88/0x9c) [ 2.408057] [<c0592114>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 2.415802] [<c030eb3c>] (handle_IPI) from [<c03017e0>] (gic_handle_irq+0x94/0x98) [ 2.423734] [<c03017e0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.431563] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.436855] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.445418] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e5e8 c1302510 [ 2.453985] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff [ 2.460911] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.468656] [<c0308780>] (arch_cpu_idle) from [<c03791e0>] (cpu_startup_entry+0x1bc/0x218) [ 2.477317] [<c03791e0>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.485888] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.492723] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:46]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:47]: Done.
========================================================================
Board pandaes-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.050720] Power Management for TI OMAP4+ devices. [ 2.055847] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.062988] ThumbEE CPU extension supported. [ 2.067687] Registering SWP/SWPB emulation handler [ 2.072814] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.081939] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.088439] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.095184] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.102203] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.111968] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 2.118774] hw-breakpoint: CPU 0 failed to disable vector catch [ 2.125793] twl 0-0048: PIH (irq 338) nested IRQs [ 2.150054] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.157531] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.166259] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.175201] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.208374] hub 1-1:1.0: USB hub found [ 2.212677] hub 1-1:1.0: 5 ports detected [ 2.308227] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.328338] mmc0: new SDIO card at address 0001 [ 2.341705] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.356292] vwl1271: disabling [ 2.362670] VUSB: disabling [ 2.366058] VANA: disabling [ 2.369476] VDAC: disabling [ 2.374969] Waiting for root device /dev/mmcblk0p2... [ 2.496551] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.511596] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.521881] mmc1: new high speed SDHC card at address b368 [ 2.528137] mmcblk1: mmc1:b368 00000 7.51 GiB [ 2.534545] mmcblk1: p1 p2 [ 2.599304] smsc95xx v1.0.4 [ 2.668273] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 76:87:e5:03:31:25
[PYBOOT] [pandaes 02:16]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:17]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:18]: Done.
========================================================================
Board pandaes-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.471130] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 4.522735] vwl1271: disabling [ 4.530944] VUSB: disabling [ 4.534912] VANA: disabling [ 4.539154] VDAC: disabling [ 4.549743] Waiting for root device /dev/mmcblk0p2... [ 4.600616] mmc1: host does not support reading read-only switch, assuming write-enable [ 4.611114] mmc1: new high speed SDHC card at address b368 [ 4.619842] mmcblk1: mmc1:b368 00000 7.51 GiB [ 4.628601] mmcblk1: p1 p2 [ 4.732299] ------------[ cut here ]------------ [ 4.732299] WARNING: CPU: 1 PID: 19 at /home/build/work/batch/arch/arm/mach-omap2/clockdomain.c:1279 clkdm_hwmod_disable+0xcc/0xe0 [ 4.749511] Modules linked in: [ 4.749511] CPU: 1 PID: 19 Comm: kworker/1:1 Not tainted 4.6.0-next-20160519 #1 [ 4.749511] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 4.766662] Workqueue: pm pm_runtime_work [ 4.766662] [<c010ff48>] (unwind_backtrace) from [<c010c0a4>] (show_stack+0x10/0x14) [ 4.772491] [<c010c0a4>] (show_stack) from [<c0486b3c>] (dump_stack+0xac/0xe0) [ 4.772491] [<c0486b3c>] (dump_stack) from [<c0137a98>] (__warn+0xd8/0x104) [ 4.772491] [<c0137a98>] (__warn) from [<c0137b70>] (warn_slowpath_null+0x20/0x28) [ 4.772491] [<c0137b70>] (warn_slowpath_null) from [<c012df10>] (clkdm_hwmod_disable+0xcc/0xe0) [ 4.810882] [<c012df10>] (clkdm_hwmod_disable) from [<c01217dc>] (_idle+0x164/0x22c) [ 4.810882] [<c01217dc>] (_idle) from [<c0121ce0>] (omap_hwmod_idle+0x24/0x44) [ 4.810882] [<c0121ce0>] (omap_hwmod_idle) from [<c0122dac>] (omap_device_idle+0x3c/0x8c) [ 4.810882] [<c0122dac>] (omap_device_idle) from [<c0535c5c>] (__rpm_callback+0x2c/0x60) [ 4.810882] [<c0535c5c>] (__rpm_callback) from [<c0535ce0>] (rpm_callback+0x50/0x80) [ 4.843597] [<c0535ce0>] (rpm_callback) from [<c0536230>] (rpm_suspend+0xf4/0x684) [ 4.843597] [<c0536230>] (rpm_suspend) from [<c0537b48>] (pm_runtime_work+0x74/0xa8) [ 4.859619] [<c0537b48>] (pm_runtime_work) from [<c0154898>] (process_one_work+0x2b0/0x770) [ 4.867736] [<c0154898>] (process_one_work) from [<c01558d0>] (worker_thread+0x3c/0x540) [ 4.882537] [<c01558d0>] (worker_thread) from [<c015b244>] (kthread+0xd0/0xf0) [ 4.882537] [<c015b244>] (kthread) from [<c01077b0>] (ret_from_fork+0x14/0x24) [ 4.900054] ---[ end trace 30f04062a383b059 ]---
[PYBOOT] [pandaes 02:27]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:28]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:30]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.830035] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.834890] usb 1-1: Manufacturer: Generic [ 2.838967] usb 1-1: SerialNumber: 200901010001 [ 2.845511] asix 5-1:1.0 eth0: register 'asix' at usb-xhci-hcd.6.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.880519] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.893012] mmc2: new high speed SDIO card at address 0001 [ 2.902311] exynos-dp 145b0000.dp-controller: failed to get pll lock status [ 2.908057] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 2.915591] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.922726] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.929316] [drm] No driver support for vblank timestamp query. [ 2.939492] exynos-dp 145b0000.dp-controller: AUX CH command reply failed! [ 2.949765] exynos-dp 145b0000.dp-controller: AUX CH command reply failed! [ 2.960012] exynos-dp 145b0000.dp-controller: AUX CH command reply failed! [ 2.974845] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success [ 2.976564] exynos-dp 145b0000.dp-controller: Link Training success! [ 2.981118] exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok [ 2.981122] exynos-dp 145b0000.dp-controller: unable to config video [ 3.065154] Console: switching to colour frame buffer device 274x77 [ 3.157097] exynos-drm exynos-drm: fb0: frame buffer device [ 3.175128] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.180064] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.187748] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.209736] vdd_1v2_2: disabling [ 3.211670] TPS65090_RAILSDCDC3: disabling [ 3.215593] TPS65090_RAILSLDO1: disabling [ 3.219556] TPS65090_RAILSLDO2: disabling [ 3.224079] ALSA device list: [ 3.226514] #0: Peach-Pi-I2S-MAX98091 [ 3.231201] Waiting for root device /dev/mmcblk0p1... [ 5.101747] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.106905] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 23.040141] random: nonblocking pool is initialized
[PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:46]: got exception: timeout ~$off
[PYBOOT] [pi 01:47]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.638821] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.650901] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.660842] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.666498] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.672701] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.678056] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.687840] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.710194] Waiting for root device /dev/mmcblk0p1... [ 1.747351] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.756291] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.765894] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.775434] mmc_host mmc1: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) [ 1.785548] mmc1: new HS400 MMC card at address 0001 [ 1.790697] mmcblk1: mmc1:0001 MAG2GC 14.6 GiB [ 1.794991] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB [ 1.800875] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB [ 1.807125] mmcblk1rpmb: mmc1:0001 MAG2GC partition 3 4.00 MiB [ 1.813041] mmcblk1: p1 [ 1.820815] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.826375] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.832669] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.838032] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.638054] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.5.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.651860] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.657313] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.663694] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.669076] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 5.042026] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.047174] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.059419] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.064858] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.071257] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.076630] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:50]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.633194] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.645269] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655173] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660836] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.667039] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.672393] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.682174] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.704432] Waiting for root device /dev/mmcblk0p1... [ 1.741827] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.750757] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.760311] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.769908] mmc_host mmc1: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) [ 1.780027] mmc1: new HS400 MMC card at address 0001 [ 1.785169] mmcblk1: mmc1:0001 MAG2GC 14.6 GiB [ 1.789466] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB [ 1.795352] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB [ 1.801594] mmcblk1rpmb: mmc1:0001 MAG2GC partition 3 4.00 MiB [ 1.807517] mmcblk1: p1 [ 1.815189] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.820762] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.827042] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.832405] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.637522] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.5.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.651330] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.656774] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.663159] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.668541] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 5.041500] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.046648] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.058889] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.064332] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.070730] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.076104] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:01]: got exception: timeout ~$off
[PYBOOT] [pi 02:02]: Done.
========================================================================
Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.720685] Registering SWP/SWPB emulation handler [ 2.725238] big.LITTLE switcher initializing [ 2.729446] bL_switcher_halve_cpus: no CPU pairing possible [ 2.735018] big.LITTLE switcher initialization failed [ 2.752638] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.757023] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.763685] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.769818] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.776273] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.781616] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.791156] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.797458] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.803167] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.810317] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.815139] usb 1-1: Manufacturer: Generic [ 2.819189] usb 1-1: SerialNumber: 200901010001 [ 2.825147] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.829763] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 2.841345] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 2.863743] vdd_1v2_2: disabling [ 2.865904] TPS65090_RAILSDCDC3: disabling [ 2.871236] asix 5-1:1.0 eth0: register 'asix' at usb-xhci-hcd.6.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.881006] lcd_vdd: disabling [ 2.881957] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.886374] mmc2: new high speed SDIO card at address 0001 [ 2.888357] TPS65090_RAILSLDO1: disabling [ 2.888362] TPS65090_RAILSLDO2: disabling [ 2.888878] ALSA device list: [ 2.888881] #0: Peach-Pit-I2S-MAX98090 [ 2.921374] Waiting for root device /dev/mmcblk0p1... [ 5.101729] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.106881] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 40.935138] random: nonblocking pool is initialized
[PYBOOT] [pit 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:47]: got exception: timeout ~$off
[PYBOOT] [pit 01:48]: Done.
========================================================================
Board pit-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.616116] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622586] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.627959] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.633338] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.645429] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655342] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.661005] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.667207] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.672562] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.682340] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.703922] Waiting for root device /dev/mmcblk0p1... [ 1.741880] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.750856] mmc1: new HS200 MMC card at address 0001 [ 1.755703] mmcblk1: mmc1:0001 MAG2GC 14.6 GiB [ 1.759997] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB [ 1.765940] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB [ 1.771805] mmcblk1rpmb: mmc1:0001 MAG2GC partition 3 4.00 MiB [ 1.778132] mmcblk1: p1 [ 1.786030] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.791616] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.797873] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.803252] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.637584] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.5.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.651360] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.656802] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.663188] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.668570] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 5.041548] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.046695] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.058927] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.064366] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.070768] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.076142] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo
[PYBOOT] [pit 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:50]: got exception: timeout ~$off
[PYBOOT] [pit 01:52]: Done.
========================================================================
Board pit-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.616430] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622896] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628270] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.633649] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.645736] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655690] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.661352] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.667554] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.672908] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 1.682686] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.704329] Waiting for root device /dev/mmcblk0p1... [ 1.742134] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.751107] mmc1: new HS200 MMC card at address 0001 [ 1.755963] mmcblk1: mmc1:0001 MAG2GC 14.6 GiB [ 1.760259] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB [ 1.766200] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB [ 1.772066] mmcblk1rpmb: mmc1:0001 MAG2GC partition 3 4.00 MiB [ 1.778394] mmcblk1: p1 [ 1.786324] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.791913] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.798167] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.803545] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 2.637842] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.5.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.651677] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.657123] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.663508] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.668890] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo [ 5.041806] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.046955] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.059235] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.064670] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.071071] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.076445] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 128,64 bit host data width,64 deep fifo
[PYBOOT] [pit 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:55]: got exception: timeout ~$off
[PYBOOT] [pit 01:56]: Done.
========================================================================
Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.896020] mmc0: switch to bus width 8 failed [ 1.900725] mmc0: switch to bus width 4 failed [ 1.902925] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.907940] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.907969] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.907990] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.911581] tegra-ehci c5000000.usb: irq 25, io mem 0xc5000000 [ 1.925641] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.926383] hub 3-0:1.0: USB hub found [ 1.926429] hub 3-0:1.0: 1 port detected [ 1.930503] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.930506] [drm] No driver support for vblank timestamp query. [ 1.965263] mmc0: new high speed MMC card at address 0001 [ 1.971169] mmcblk0: mmc0:0001 MMC08G 7.46 GiB [ 1.971355] mmcblk0boot0: mmc0:0001 MMC08G partition 1 512 KiB [ 1.971527] mmcblk0boot1: mmc0:0001 MMC08G partition 2 512 KiB [ 1.972741] mmcblk0: p3 [ 2.011753] Console: switching to colour frame buffer device 170x48 [ 2.051367] drm drm: fb0: frame buffer device [ 2.067112] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.073747] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.080794] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.091327] mmc2: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.097183] vdd_1v2: disabling [ 2.100233] vdd_1v5: disabling [ 2.104776] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.113082] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.125761] mmc2: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.150111] mmc2: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.159030] mmc2: new SDIO card at address 0001 [ 2.720314] asix 1-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.731761] Waiting for root device /dev/mmcblk2p3... [ 58.422226] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:54]: Done.
========================================================================
Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.479564] can: raw protocol (rev 20120528) [ 4.483829] can: broadcast manager protocol (rev 20120528 t) [ 4.489557] can: netlink gateway (rev 20130117) max_hops=1 [ 4.525180] Bluetooth: RFCOMM socket layer initialized [ 4.530367] Bluetooth: RFCOMM ver 1.11 [ 4.534166] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.539738] Bluetooth: BNEP socket layer initialized [ 4.544709] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.550724] Bluetooth: HIDP socket layer initialized [ 4.556773] Key type dns_resolver registered [ 4.563227] Registering SWP/SWPB emulation handler [ 4.573532] VDDIO_HDMI: supplied by vdd_5v0 [ 4.591663] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.605899] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.611421] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.619942] tegra-ehci c5000000.usb: irq 25, io mem 0xc5000000 [ 4.646345] asix 1-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.657161] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.669921] hub 3-0:1.0: USB hub found [ 4.673813] hub 3-0:1.0: 1 port detected [ 4.692521] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.699207] [drm] No driver support for vblank timestamp query. [ 4.802186] Console: switching to colour frame buffer device 170x48 [ 4.829991] drm drm: fb0: frame buffer device [ 4.854808] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.861936] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.869553] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.888247] vdd_1v2: disabling [ 4.891300] vdd_1v5: disabling [ 4.894437] ALSA device list: [ 4.897425] #0: NVIDIA Tegra Seaboard [ 4.901909] Waiting for root device /dev/mmcblk2p3... [ 62.418899] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:55]: Done.
========================================================================
Board snow-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.564931] pwrseq_simple mmc3_pwrseq: GPIO lookup for consumer reset [ 3.571298] pwrseq_simple mmc3_pwrseq: using device tree for GPIO lookup [ 3.577984] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/mmc3_pwrseq[1]' - status (0) [ 3.588392] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 3.594451] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 3.600826] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 3.606213] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 91,32 bit host data width,128 deep fifo [ 3.615646] dwmmc_exynos 12230000.mmc: GPIO lookup for consumer wp [ 3.621740] dwmmc_exynos 12230000.mmc: using device tree for GPIO lookup [ 3.628424] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@12230000[0]' [ 3.637190] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@12230000[0]' [ 3.645869] dwmmc_exynos 12230000.mmc: using lookup tables for GPIO lookup [ 3.652726] dwmmc_exynos 12230000.mmc: lookup for GPIO wp failed [ 3.658735] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 3.690783] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 3.695117] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/lid-switch[0]' - status (0) [ 3.704740] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/power[0]' - status (0) [ 3.714188] gpio-250 (Lid): gpiod_set_debounce: missing set() or set_debounce() operations [ 3.722601] gpio-232 (Power): gpiod_set_debounce: missing set() or set_debounce() operations [ 3.731086] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.747651] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.761484] mmc2: new high speed SDIO card at address 0001 [ 3.770842] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 3.787640] TPS65090_RAILSDCDC1: disabling [ 3.790255] TPS65090_RAILSDCDC2: disabling [ 3.794364] TPS65090_RAILSDCDC3: disabling [ 3.799789] lcd_vdd: disabling [ 3.802635] TPS65090_RAILSLDO1: disabling [ 3.805445] TPS65090_RAILSLDO2: disabling [ 3.810247] ALSA device list: [ 3.812411] #0: Snow-I2S-MAX98095 [ 3.816586] Waiting for root device /dev/mmcblk0p3... [ 48.030891] random: nonblocking pool is initialized
[PYBOOT] [snow 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:02]: got exception: timeout ~$off
[PYBOOT] [snow 02:03]: Done.
========================================================================
Board snow-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.716018] usbhid: USB HID core driver [ 1.724581] NET: Registered protocol family 10 [ 1.728060] sit: IPv6 over IPv4 tunneling driver [ 1.732690] NET: Registered protocol family 17 [ 1.736607] can: controller area network core (rev 20120528 abi 9) [ 1.742824] NET: Registered protocol family 29 [ 1.747186] can: raw protocol (rev 20120528) [ 1.751439] can: broadcast manager protocol (rev 20120528 t) [ 1.757084] can: netlink gateway (rev 20130117) max_hops=1 [ 1.762824] Key type dns_resolver registered [ 1.767120] ThumbEE CPU extension supported. [ 1.771070] Registering SWP/SWPB emulation handler [ 1.782455] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 1.787911] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 1.794291] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 1.799689] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 91,32 bit host data width,128 deep fifo [ 1.809116] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 1.844371] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 1.851273] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.860202] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.867330] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.876504] mmc1: new DDR MMC card at address 0001 [ 1.881178] mmcblk1: mmc1:0001 SEM16G 14.7 GiB [ 1.885533] mmcblk1boot0: mmc1:0001 SEM16G partition 1 4.00 MiB [ 1.891403] mmcblk1boot1: mmc1:0001 SEM16G partition 2 4.00 MiB [ 1.894017] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.900937] mmc2: new high speed SDIO card at address 0001 [ 1.912509] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 4.00 MiB [ 1.918204] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 1.930500] mmcblk1: p2 p3 [ 1.937652] vbat-supply: disabling [ 1.941436] Waiting for root device /dev/mmcblk0p3... [ 76.004476] random: nonblocking pool is initialized
[PYBOOT] [snow 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:04]: got exception: timeout ~$off
[PYBOOT] [snow 02:05]: Done.
========================================================================
Board snow-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.716023] usbhid: USB HID core driver [ 1.724605] NET: Registered protocol family 10 [ 1.728087] sit: IPv6 over IPv4 tunneling driver [ 1.732713] NET: Registered protocol family 17 [ 1.736630] can: controller area network core (rev 20120528 abi 9) [ 1.742844] NET: Registered protocol family 29 [ 1.747209] can: raw protocol (rev 20120528) [ 1.751459] can: broadcast manager protocol (rev 20120528 t) [ 1.757106] can: netlink gateway (rev 20130117) max_hops=1 [ 1.762852] Key type dns_resolver registered [ 1.767141] ThumbEE CPU extension supported. [ 1.771091] Registering SWP/SWPB emulation handler [ 1.780920] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 1.786400] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 1.792764] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 1.798149] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 91,32 bit host data width,128 deep fifo [ 1.807588] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 1.844382] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 1.851719] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.880568] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.889950] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.899031] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 1.916500] vbat-supply: disabling [ 1.918859] mmc1: new DDR MMC card at address 0001 [ 1.923709] mmcblk1: mmc1:0001 SEM16G 14.7 GiB [ 1.927945] mmcblk1boot0: mmc1:0001 SEM16G partition 1 4.00 MiB [ 1.934250] mmcblk1boot1: mmc1:0001 SEM16G partition 2 4.00 MiB [ 1.939700] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 4.00 MiB [ 1.949073] mmcblk1: p2 p3 [ 1.955445] Waiting for root device /dev/mmcblk0p3... [ 1.962260] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.977694] mmc2: new high speed SDIO card at address 0001 [ 75.524455] random: nonblocking pool is initialized
[PYBOOT] [snow 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 02:04]: got exception: timeout ~$off
[PYBOOT] [snow 02:06]: Done.
========================================================================
Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.074127] mmcblk0: p1 p2 p3 p4 [ 2.092987] sdhci: Secure Digital Host Controller Interface driver [ 2.099212] sdhci: Copyright(c) Pierre Ossman [ 2.105133] Synopsys Designware Multimedia Card Interface Driver [ 2.112091] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.120117] ledtrig-cpu: registered to indicate activity on CPUs [ 2.126525] usbcore: registered new interface driver usbhid [ 2.132110] usbhid: USB HID core driver [ 2.140777] NET: Registered protocol family 10 [ 2.145965] sit: IPv6 over IPv4 tunneling driver [ 2.151214] NET: Registered protocol family 17 [ 2.155700] can: controller area network core (rev 20120528 abi 9) [ 2.161956] NET: Registered protocol family 29 [ 2.166412] can: raw protocol (rev 20120528) [ 2.170684] can: broadcast manager protocol (rev 20120528 t) [ 2.176361] can: netlink gateway (rev 20130117) max_hops=1 [ 2.182373] Key type dns_resolver registered [ 2.186828] ThumbEE CPU extension supported. [ 2.191131] Registering SWP/SWPB emulation handler [ 2.199462] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.206359] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.215454] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.222473] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.229461] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.236450] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.249847] db8500-esram12: disabling [ 2.253723] db8500-esram34: disabling [ 2.257446] en-3v3-fixed-supply: disabling [ 2.261779] V-CSI/DSI: disabling [ 2.265075] mmci-reg: disabling [ 2.268737] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.274719] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.281036] Waiting for root device /dev/mmcblk3p4...
[PYBOOT] [snowball 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:18]: got exception: timeout ~$off
[PYBOOT] [snowball 02:19]: Done.
========================================================================
Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.779022] st-gyro-i2c: probe of 2-0068 failed with error -22 [ 2.787475] iio iio:device0: lsm303dlh_magn: WhoAmI mismatch (0x3c). [ 2.793945] st-magn-i2c: probe of 2-001e failed with error -22 [ 2.805053] iio iio:device0: Full-scale not possible [ 2.815155] iio iio:device0: registered pressure sensor lps001wp [ 2.826721] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.833923] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.846649] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.857391] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.867309] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.878021] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.901214] NET: Registered protocol family 10 [ 2.916595] sit: IPv6 over IPv4 tunneling driver [ 2.922546] NET: Registered protocol family 17 [ 2.927032] NET: Registered protocol family 35 [ 2.931610] NET: Registered protocol family 37 [ 2.936157] Registering SWP/SWPB emulation handler [ 2.952941] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.965454] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-30 03:55:02 UTC (957066902) [ 2.974578] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.981597] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.988586] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.995605] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 3.009857] db8500-esram12: disabling [ 3.013641] db8500-esram34: disabling [ 3.017364] en-3v3-fixed-supply: disabling [ 3.021942] V-CSI/DSI: disabling [ 3.025207] mmci-reg: disabling [ 3.028503] ALSA device list: [ 3.031494] #0: MOP500-card [ 3.034759] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 3.040710] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 3.046936] Waiting for root device /dev/mmcblk3p4...
[PYBOOT] [snowball 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:00]: got exception: timeout ~$off
[PYBOOT] [snowball 02:01]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 5.5 MiB/s done Bytes transferred = 6571072 (644440 hex) => setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 => tftp 0x18000000 tmp/wandboard-HaqJNs/imx6q-wandboard.dtb tftp 0x18000000 tmp/wandboard-HaqJNs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.162 Filename 'tmp/wandboard-HaqJNs/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 5.1 MiB/s done Bytes transferred = 32385 (7e81 hex) => bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [wandboard 00:21]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x644440 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae80
Starting kernel ...
[PYBOOT] [wandboard 00:21]: u-boot: started kernel.
[PYBOOT] [wandboard 00:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 00:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 00:59]: Done.
========================================================================
Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################################################# ######################## 5.3 MiB/s done Bytes transferred = 7020416 (6b1f80 hex) => setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 => tftp 0x18000000 tmp/wandboard-kz1MFe/imx6q-wandboard.dtb tftp 0x18000000 tmp/wandboard-kz1MFe/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.162 Filename 'tmp/wandboard-kz1MFe/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 5.1 MiB/s done Bytes transferred = 32385 (7e81 hex) => bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000
[PYBOOT] [wandboard 00:26]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x6b1f80 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae80
Starting kernel [PYBOOT] [wandboard 00:26]: u-boot: started kernel. ...
[PYBOOT] [wandboard 01:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:02]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:03]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter