Automated DT boot report for various ARM defconfigs.
Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').
Tree/Branch: next-20130911 Git describe: next-20130911 Commit: 11ecf064c1 Add linux-next specific files for 20130911
Failed boot tests (console logs at the end) =========================================== imx6q-wandboard: FAIL: arm-multi_v7_defconfig
Full Report ===========
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard PASS: 0 min 15.7 sec
arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 10.0 sec omap3-beagle-xm PASS: 0 min 52.5 sec sun4i-a10-cubieboard PASS: 0 min 14.5 sec omap3-tobi,3530overo PASS: 0 min 41.0 sec am335x-bone,am335xboneb PASS: 0 min 31.8 sec am335x-bone,am335xbone PASS: 0 min 33.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap4-panda PASS: 1 min 1.1 sec imx6q-wandboard FAIL: 0 min 0.0 sec omap3-tobi,3730storm PASS: 0 min 40.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 53.2 sec
arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.3 sec
arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 51.9 sec am335x-bone,am335xboneb PASS: 0 min 27.6 sec am335x-bone,am335xbone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.4 sec omap4-panda PASS: 1 min 7.1 sec omap4-panda-es PASS: 1 min 9.9 sec omap3-tobi,3730storm PASS: 0 min 41.8 sec omap3-beagle PASS: 1 min 4.3 sec
Console logs for failures =========================
arm-multi_v7_defconfig ----------------------
imx6q-wandboard: FAIL: last 24 lines of boot log: -------------------------------------------------
[ 1.031161] Registering SWP/SWPB emulation handler [ 1.037316] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.042384] ci_hdrc ci_hdrc.0: no supported roles [ 1.047641] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.052720] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.057645] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.077194] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.083218] hub 1-0:1.0: USB hub found [ 1.087018] hub 1-0:1.0: 1 port detected [ 1.091269] /work/kernel/jenkins/jobs/arm-next/workspace/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.102421] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1) [ 1.113727] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.097504] libphy: 2188000.ethernet:01 - Link is Up - 100/Full [ 4.117199] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4.137414] IP-Config: Complete: [ 4.140660] device=eth0, hwaddr=00:1f:7b:b4:01:83, ipaddr=192.168.1.181, mask=255.255.255.0, gw=255.255.255.255 [ 4.151215] host=192.168.1.181, domain=, nis-domain=(none) [ 4.157143] bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath= [ 4.163871] nameserver0=192.168.1.254, nameserver1=109.0.0.0 [ 4.170861] Waiting for root device /dev/mmcblk0p2... [ 60.317573] ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL
kernel-build-reports@lists.linaro.org