Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-237-g698ea54/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:49.45 beaver arm-multi_v7_defconfig : FAILED 1:57.78 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:55.26 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.33 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.82 omap5uevm arm-multi_lpae_defconfig : FAILED 2:18.69 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:01.92 pi arm-multi_lpae_defconfig : FAILED 1:56.29 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:22.80 arndale arm-exynos_defconfig : passed 1:32.60 arndale arm-multi_v7_defconfig : passed 1:41.02 arndale arm-multi_lpae_defconfig : passed 1:34.20 bbb arm-omap2plus_defconfig : passed 1:40.65 bbb arm-multi_v7_defconfig : passed 1:21.42 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:52.34 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:59.57 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:53.82 capri arm-bcm_defconfig : passed 0:52.71 capri arm-multi_v7_defconfig : passed 1:18.78 chitra powerpc-ppc64_defconfig : passed 3:14.62 colombus arm-sunxi_defconfig : passed 2:30.82 colombus arm-multi_v7_defconfig : passed 2:27.69 colombus arm-multi_lpae_defconfig : passed 2:40.32 cosmic arm-imx_v6_v7_defconfig : passed 3:24.81 cosmic arm-multi_v7_defconfig : passed 3:06.79 cubie arm-sunxi_defconfig : passed 0:51.42 cubie arm-multi_v7_defconfig : passed 1:02.85 cubie2 arm-sunxi_defconfig : passed 0:50.81 cubie2 arm-multi_v7_defconfig : passed 0:59.87 cubie2 arm-multi_lpae_defconfig : passed 0:52.74 cubox arm-multi_v7_defconfig : passed 1:23.29 cubox arm-mvebu_v7_defconfig : passed 1:19.47 dalmore arm-tegra_defconfig : warnings 1:28.54 dalmore arm-multi_v7_defconfig : warnings 1:34.15 dalmore arm-multi_lpae_defconfig : warnings 1:47.61 jetsontk1 arm-tegra_defconfig : warnings 0:52.79 jetsontk1 arm-multi_v7_defconfig : warnings 0:48.86 jetsontk1 arm-multi_lpae_defconfig : warnings 0:50.34 pandaes arm-omap2plus_defconfig : warnings 1:44.63 pandaes arm-multi_v7_defconfig : passed 1:40.38 parallella arm-multi_v7_defconfig : passed 2:47.05 pi arm-exynos_defconfig : passed 2:11.00 pit arm-exynos_defconfig : passed 2:11.84 pit arm-multi_v7_defconfig : passed 2:25.66 pit arm-multi_lpae_defconfig : passed 2:13.42 seaboard arm-tegra_defconfig : warnings 1:00.11 seaboard arm-multi_v7_defconfig : warnings 1:03.63 seattle arm64-defconfig : passed 2:45.02 snow arm-exynos_defconfig : passed 2:15.07 snow arm-multi_v7_defconfig : passed 1:57.01 snow arm-multi_lpae_defconfig : passed 2:01.00 snowball arm-u8500_defconfig : passed 1:25.41 snowball arm-multi_v7_defconfig : passed 1:34.56 trimslice arm-tegra_defconfig : warnings 2:44.05 trimslice arm-multi_v7_defconfig : warnings 1:43.24 wandboard arm-imx_v6_v7_defconfig : passed 1:14.95 wandboard arm-multi_v7_defconfig : passed 1:24.27
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:21.09 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.70 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:17.84 hummingboard arm-multi_v7_defconfig : OFFLINE 2:11.91 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.42 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:54.61 sama5 arm-sama5_defconfig : OFFLINE 2:25.39 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:39.15 socfpga arm-socfpga_defconfig : OFFLINE 2:21.26 socfpga arm-multi_v7_defconfig : OFFLINE 2:14.24
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.403107] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.410064] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.416584] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.423532] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.429118] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.435830] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.445832] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.457061] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.463681] [drm] No driver support for vblank timestamp query. [ 3.469619] drm drm: No connectors reported connected with modes [ 3.475625] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.501083] Console: switching to colour frame buffer device 128x48 [ 3.513256] drm drm: fb0: frame buffer device [ 3.528404] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.539213] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.545677] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.551087] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.558912] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.573414] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.580162] hub 1-0:1.0: USB hub found [ 3.583934] hub 1-0:1.0: 1 port detected [ 3.588868] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.594279] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.602025] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.613408] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.620072] hub 2-0:1.0: USB hub found [ 3.623840] hub 2-0:1.0: 1 port detected [ 3.634186] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.647833] vdd_sata,avdd_plle: disabling [ 3.652538] usb1_vbus: disabling [ 3.656610] Waiting for root device /dev/mmcblk0p1... [ 3.933413] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.871982] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:55]: got exception: timeout ~$off
[PYBOOT] [beaver 01:57]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.524209] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.531253] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.536853] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.544369] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.554368] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.566932] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.573552] [drm] No driver support for vblank timestamp query. [ 6.579554] drm drm: No connectors reported connected with modes [ 6.585566] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.611328] Console: switching to colour frame buffer device 128x48 [ 6.623137] drm drm: fb0: frame buffer device [ 6.650794] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.660087] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.666562] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.671998] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.679973] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.700799] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.708409] hub 1-0:1.0: USB hub found [ 6.712189] hub 1-0:1.0: 1 port detected [ 6.716997] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.722423] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.730291] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.750795] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.758279] hub 2-0:1.0: USB hub found [ 6.762053] hub 2-0:1.0: 1 port detected [ 6.770264] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.788467] vdd_sata,avdd_plle: disabling [ 6.792885] usb1_vbus: disabling [ 6.796296] ALSA device list: [ 6.799253] #0: NVIDIA Tegra Beaver [ 6.803497] Waiting for root device /dev/mmcblk0p1... [ 7.080801] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.066196] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:49]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.785981] NET: Registered protocol family 10 [ 1.786569] sit: IPv6 over IPv4 tunneling driver [ 1.790896] NET: Registered protocol family 17 [ 1.794908] NET: Registered protocol family 15 [ 1.799370] Key type dns_resolver registered [ 1.803683] Registering SWP/SWPB emulation handler [ 1.814606] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816932] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.824328] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.831493] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.838058] [drm] No driver support for vblank timestamp query. [ 1.843964] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.850312] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.855527] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.873708] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.878082] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.887055] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889330] max98090 1-0010: use default 2.8v micbias [ 1.897528] mmc1: new DDR MMC card at address 0001 [ 1.902729] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.907052] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.907066] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.918949] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.920351] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.936505] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.937984] mmcblk1: p1 p2 [ 1.953825] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.973839] VDD10_HDMI_1.0V: disabling [ 1.974555] vdd_g3d: disabling [ 1.975624] BUCK8_2.8V: disabling [ 1.979653] ALSA device list: [ 1.981232] #0: Odroid-U3 [ 1.985045] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:53]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:54]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.942510] mmc0: new high speed MMC card at address 0001 [ 1.948565] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953323] smps9: Bringing 0uV into 2100000-2100000uV [ 1.958831] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.965186] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.974011] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.980522] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.988534] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.999627] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.007329] smsc95xx v1.0.4 [ 2.010652] ldo9: bypassed regulator has no supply! [ 2.015780] ldo9: failed to get the current voltage(-517) [ 2.021440] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.036756] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.057950] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ce:97:62:17:68:04 [ 2.070450] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.076867] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107180] smps9: Bringing 0uV into 2100000-2100000uV [ 2.125828] ldo9: bypassed regulator has no supply! [ 2.130939] ldo9: failed to get the current voltage(-517) [ 2.136609] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151139] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:00:30 UTC (946688430) [ 2.167143] pbias_mmc_omap5: disabling [ 2.171084] vmmcsdio_fixed: disabling [ 2.175665] Waiting for root device /dev/mmcblk1p2... [ 2.313519] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.449382] hub 1-2:1.0: USB hub found [ 2.453393] hub 1-2:1.0: 3 ports detected [ 2.459263] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.487228] smps9: Bringing 0uV into 2100000-2100000uV [ 2.505922] ldo9: bypassed regulator has no supply! [ 2.511042] ldo9: failed to get the current voltage(-517) [ 2.516712] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:16]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:17]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938241] mmc0: new high speed MMC card at address 0001 [ 1.948966] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953882] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960225] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.970374] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978486] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985022] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993002] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004112] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011743] smsc95xx v1.0.4 [ 2.015048] ldo9: bypassed regulator has no supply! [ 2.020172] ldo9: failed to get the current voltage(-517) [ 2.025831] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.041149] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064304] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.068017] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 86:84:d3:e7:e4:11 [ 2.082389] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112190] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130861] ldo9: bypassed regulator has no supply! [ 2.135984] ldo9: failed to get the current voltage(-517) [ 2.141649] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156140] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:57:53 UTC (946688273) [ 2.172137] pbias_mmc_omap5: disabling [ 2.176077] vmmcsdio_fixed: disabling [ 2.180623] Waiting for root device /dev/mmcblk1p2... [ 2.293523] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.429319] hub 1-2:1.0: USB hub found [ 2.433321] hub 1-2:1.0: 3 ports detected [ 2.439217] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.467214] smps9: Bringing 0uV into 2100000-2100000uV [ 2.485908] ldo9: bypassed regulator has no supply! [ 2.491030] ldo9: failed to get the current voltage(-517) [ 2.496696] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:06]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.905069] ldo9: bypassed regulator has no supply! [ 3.910202] ldo9: failed to get the current voltage(-517) [ 3.915874] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.938802] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.946353] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.952949] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.959261] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.966100] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.975690] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.985185] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.992248] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.998382] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.004683] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.011541] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.021132] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.030628] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.037648] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.078594] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.084890] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.091756] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.101347] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.110835] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.117873] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.138259] smps9: Bringing 0uV into 2100000-2100000uV [ 4.166467] ldo9: bypassed regulator has no supply! [ 4.171602] ldo9: failed to get the current voltage(-517) [ 4.177266] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.197377] hctosys: unable to open rtc device (rtc0) [ 4.202697] sr_init: No PMIC hook to init smartreflex [ 4.208195] sr_init: platform driver register failed for SR [ 4.235748] pbias_mmc_omap5: disabling [ 4.239705] vmmcsdio_fixed: disabling [ 4.245833] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.538887] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545240] isl29018 7-0044: Failed to read 1: -6 [ 1.549824] isl29018 7-0044: regmap initialization fails: -6 [ 1.560756] NET: Registered protocol family 10 [ 1.565196] sit: IPv6 over IPv4 tunneling driver [ 1.568770] NET: Registered protocol family 17 [ 1.572775] can: controller area network core (rev 20120528 abi 9) [ 1.578967] NET: Registered protocol family 29 [ 1.583353] can: raw protocol (rev 20120528) [ 1.587603] can: broadcast manager protocol (rev 20120528 t) [ 1.593244] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598974] Key type dns_resolver registered [ 1.603295] ThumbEE CPU extension supported. [ 1.607213] Registering SWP/SWPB emulation handler [ 1.617125] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622610] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628976] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634350] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644462] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654793] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660242] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670427] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676626] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681987] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691714] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714572] Waiting for root device /dev/mmcblk0p1... [ 1.718456] mmc0: tuning execution failed: -5 [ 1.722513] mmc0: error -5 whilst initialising MMC card [ 2.583672] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597841] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603299] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609671] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615055] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:55]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533376] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539729] isl29018 7-0044: Failed to read 1: -6 [ 1.544313] isl29018 7-0044: regmap initialization fails: -6 [ 1.555202] NET: Registered protocol family 10 [ 1.559635] sit: IPv6 over IPv4 tunneling driver [ 1.563214] NET: Registered protocol family 17 [ 1.567221] can: controller area network core (rev 20120528 abi 9) [ 1.573411] NET: Registered protocol family 29 [ 1.577799] can: raw protocol (rev 20120528) [ 1.582048] can: broadcast manager protocol (rev 20120528 t) [ 1.587690] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593411] Key type dns_resolver registered [ 1.597743] ThumbEE CPU extension supported. [ 1.601659] Registering SWP/SWPB emulation handler [ 1.611565] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617045] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623413] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628787] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638885] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649209] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654654] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664842] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671020] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676398] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686133] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708800] Waiting for root device /dev/mmcblk0p1... [ 1.712673] mmc0: tuning execution failed: -5 [ 1.716733] mmc0: error -5 whilst initialising MMC card [ 2.583172] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597336] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602793] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609165] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614550] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:59]: got exception: timeout ~$off
[PYBOOT] [pi 02:01]: Done.
kernel-build-reports@lists.linaro.org