Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-1525-gc2e7b20/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.43 bbb arm-multi_v7_defconfig : FAILED 1:56.14 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.39 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.48 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:50.55 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.86 cosmic arm-multi_v7_defconfig : FAILED 2:08.86 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.16 dalmore arm-multi_v7_defconfig : FAILED 2:00.21 dalmore arm-multi_lpae_defconfig : FAILED 1:55.27 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.91 omap5uevm arm-omap2plus_defconfig : FAILED 2:04.28 omap5uevm arm-multi_v7_defconfig : FAILED 2:05.33 omap5uevm arm-multi_lpae_defconfig : FAILED 2:11.14 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:57.73 pi arm-multi_lpae_defconfig : FAILED 1:48.62 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.68 snowball arm-multi_v7_defconfig : FAILED 2:04.24 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:20.43 arndale arm-exynos_defconfig : passed 1:29.62 arndale arm-multi_v7_defconfig : passed 1:23.68 arndale arm-multi_lpae_defconfig : passed 1:26.11 capri arm-bcm_defconfig : passed 0:52.60 capri arm-multi_v7_defconfig : passed 0:52.24 chitra powerpc-ppc64_defconfig : passed 2:01.93 colombus arm-sunxi_defconfig : passed 2:29.67 colombus arm-multi_v7_defconfig : passed 2:35.70 colombus arm-multi_lpae_defconfig : passed 2:29.09 cubie arm-sunxi_defconfig : passed 0:57.60 cubie arm-multi_v7_defconfig : passed 1:01.59 cubie2 arm-sunxi_defconfig : passed 0:52.33 cubie2 arm-multi_v7_defconfig : passed 0:59.32 cubie2 arm-multi_lpae_defconfig : passed 0:54.95 cubox arm-multi_v7_defconfig : passed 1:24.93 cubox arm-mvebu_v7_defconfig : passed 1:05.77 hummingboard arm-imx_v6_v7_defconfig : passed 1:26.71 hummingboard arm-multi_v7_defconfig : passed 1:26.19 jetsontk1 arm-tegra_defconfig : passed 1:37.47 jetsontk1 arm-multi_v7_defconfig : passed 1:38.65 jetsontk1 arm-multi_lpae_defconfig : passed 1:39.93 pandaes arm-omap2plus_defconfig : warnings 1:35.55 pandaes arm-multi_v7_defconfig : passed 1:44.31 pi arm-exynos_defconfig : passed 2:12.55 pit arm-exynos_defconfig : passed 2:13.75 pit arm-multi_v7_defconfig : passed 2:17.86 pit arm-multi_lpae_defconfig : passed 2:15.64 seattle arm64-defconfig : warnings 2:32.27 snow arm-exynos_defconfig : passed 2:05.24 snow arm-multi_v7_defconfig : passed 2:00.36 snow arm-multi_lpae_defconfig : passed 1:58.48 trimslice arm-tegra_defconfig : passed 1:34.55 trimslice arm-multi_v7_defconfig : passed 2:51.69 wandboard arm-imx_v6_v7_defconfig : passed 1:12.53 wandboard arm-multi_v7_defconfig : passed 1:15.15

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:12.27 beaver arm-multi_v7_defconfig : OFFLINE 2:20.84 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:14.43 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:27.63 parallella arm-multi_v7_defconfig : OFFLINE 2:17.67 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.23 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.38 sama5 arm-sama5_defconfig : OFFLINE 2:21.47 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:13.49 seaboard arm-tegra_defconfig : OFFLINE 2:17.84 seaboard arm-multi_v7_defconfig : OFFLINE 2:14.53 socfpga arm-socfpga_defconfig : OFFLINE 2:24.31 socfpga arm-multi_v7_defconfig : OFFLINE 2:15.80

Board legend is available at http://arm-soc.lixom.net/boards.html

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.558833] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.624263] Synopsys Designware Multimedia Card Interface Driver [ 1.632105] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.642274] ledtrig-cpu: registered to indicate activity on CPUs [ 1.649345] usbcore: registered new interface driver usbhid [ 1.655268] usbhid: USB HID core driver [ 1.667297] NET: Registered protocol family 10 [ 1.673868] sit: IPv6 over IPv4 tunneling driver [ 1.680017] NET: Registered protocol family 17 [ 1.684780] can: controller area network core (rev 20120528 abi 9) [ 1.691419] NET: Registered protocol family 29 [ 1.696137] can: raw protocol (rev 20120528) [ 1.700657] can: broadcast manager protocol (rev 20120528 t) [ 1.706662] can: netlink gateway (rev 20130117) max_hops=1 [ 1.713421] Key type dns_resolver registered [ 1.718316] omap_voltage_late_init: Voltage driver support not added [ 1.725285] ThumbEE CPU extension supported. [ 1.729846] Registering SWP/SWPB emulation handler [ 1.774359] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.780926] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.788654] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.797358] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.805296] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.813171] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821000] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.828355] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835489] hctosys: unable to open rtc device (rtc0) [ 1.848986] Waiting for root device /dev/mmcblk0p2... [ 1.854748] mmc1: new high speed MMC card at address 0001 [ 1.861543] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.866821] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.873485] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.882091] mmcblk1: p1 p2

[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:54]: got exception: timeout ~$off

[PYBOOT] [bbb 01:55]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.060876] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.067005] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.073342] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.080228] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.089838] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.099353] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.106380] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.149595] ledtrig-cpu: registered to indicate activity on CPUs [ 2.158352] oprofile: using arm/armv7 [ 2.163475] Initializing XFRM netlink socket [ 2.168576] NET: Registered protocol family 10 [ 2.179632] sit: IPv6 over IPv4 tunneling driver [ 2.188542] NET: Registered protocol family 17 [ 2.193504] NET: Registered protocol family 15 [ 2.198978] Key type dns_resolver registered [ 2.203766] omap_voltage_late_init: Voltage driver support not added [ 2.210522] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.219074] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.228664] ThumbEE CPU extension supported. [ 2.233318] Registering SWP/SWPB emulation handler [ 2.238368] SmartReflex Class3 initialized [ 2.308382] mmc1: new high speed MMC card at address 0001 [ 2.321515] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.331230] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.342347] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.358168] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.365575] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.377709] mmcblk1: p1 p2 [ 2.385983] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.405772] hctosys: unable to open rtc device (rtc0) [ 2.411303] sr_init: No PMIC hook to init smartreflex [ 2.416997] sr_init: platform driver register failed for SR [ 2.459483] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.726818] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.741610] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.748685] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.775539] rtc-ds1307 2-006f: SET TIME! [ 1.781278] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.788025] rtc-ds1307 2-006f: 64 bytes nvram [ 1.792641] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.800850] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.806640] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.814888] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.824054] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.830913] hub 1-0:1.0: USB hub found [ 1.834868] hub 1-0:1.0: 1 port detected [ 1.839263] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.845039] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.853158] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.862174] hub 2-0:1.0: USB hub found [ 1.866146] hub 2-0:1.0: 1 port detected [ 1.872189] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.936542] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.954114] aic_dvdd_fixed: disabling [ 1.958846] Waiting for root device /dev/mmcblk0p1... [ 1.982122] mmc1: new high speed MMC card at address 0001 [ 1.988153] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993066] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999424] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006343] mmcblk1: p1 [ 2.145043] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.180074] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.205285] hub 2-1:1.0: USB hub found [ 2.209256] hub 2-1:1.0: 4 ports detected [ 2.301286] hub 1-1:1.0: USB hub found [ 2.305281] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.726704] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.741474] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.748553] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.775545] rtc-ds1307 2-006f: SET TIME! [ 1.781281] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.788030] rtc-ds1307 2-006f: 64 bytes nvram [ 1.792645] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.800862] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.806651] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.814903] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.824076] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.830954] hub 1-0:1.0: USB hub found [ 1.834914] hub 1-0:1.0: 1 port detected [ 1.839299] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.845075] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.853195] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.862219] hub 2-0:1.0: USB hub found [ 1.866192] hub 2-0:1.0: 1 port detected [ 1.872244] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.936557] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.954141] aic_dvdd_fixed: disabling [ 1.958882] Waiting for root device /dev/mmcblk0p1... [ 1.982126] mmc1: new high speed MMC card at address 0001 [ 1.988152] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.993061] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.999430] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.006345] mmcblk1: p1 [ 2.145050] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.180080] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.205324] hub 2-1:1.0: USB hub found [ 2.209297] hub 2-1:1.0: 4 ports detected [ 2.301324] hub 1-1:1.0: USB hub found [ 2.305317] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.227951] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.234254] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.241150] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.251554] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.256418] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.262716] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.269580] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.279181] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.288677] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.295733] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.345763] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.352064] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.358938] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.368535] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.378038] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.385076] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.391200] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.397512] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.404351] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.413946] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.423453] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.430493] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.475901] hctosys: unable to open rtc device (rtc0) [ 2.481197] sr_init: No PMIC hook to init smartreflex [ 2.486715] sr_init: platform driver register failed for SR [ 2.527450] mmc1: new high speed MMC card at address 0001 [ 2.533708] aic_dvdd_fixed: disabling [ 2.535666] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.536452] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.537162] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.555582] ldousb: disabling [ 2.556506] mmcblk1: p1 [ 2.568064] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.472306] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.546532] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.556858] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.631079] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.641426] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.715606] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.725932] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.800151] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.810476] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.884646] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.894981] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.969207] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.979535] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.053699] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.064020] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.138329] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.148647] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.222810] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.233133] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.307372] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.317697] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.391923] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.402242] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.476470] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.486794] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.561016] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.571341] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.645507] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.655832] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.730061] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.740387] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.814552] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.824879] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.075753] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.149734] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.159814] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.233800] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.243881] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.317860] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.327941] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.401927] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.412010] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.485995] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.496079] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.570065] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.580134] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.654119] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.664186] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.738172] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.748244] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.822233] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.832305] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.906287] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.916355] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.990337] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.000406] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.074391] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.084467] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.158449] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.168527] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.242507] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.252587] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.326578] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.336656] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.410641] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.420716] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:07]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.620801] can: netlink gateway (rev 20130117) max_hops=1 [ 2.627919] Key type dns_resolver registered [ 2.634377] ThumbEE CPU extension supported. [ 2.638810] Registering SWP/SWPB emulation handler [ 2.659390] usb1_vbus: supplied by vdd-sys-5v0 [ 2.682991] usb2_vbus: supplied by vdd-sys-5v0 [ 2.696215] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.719470] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.726328] [drm] No driver support for vblank timestamp query. [ 2.745004] mmc1: new high speed MMC card at address 0001 [ 2.752686] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.761100] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.770064] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.777191] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.787666] mmcblk1: p1 [ 2.905864] Console: switching to colour frame buffer device 240x75 [ 2.992256] drm drm: fb0: frame buffer device [ 3.012298] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.027282] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.032875] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.041785] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.057334] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.067778] hub 1-0:1.0: USB hub found [ 3.071805] hub 1-0:1.0: 1 port detected [ 3.083086] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.097117] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.159696] dvdd_ts: disabling [ 3.162914] usb1_vbus: disabling [ 3.166173] vdd_cam_1v8_reg: disabling [ 3.173890] Waiting for root device /dev/mmcblk0p1... [ 3.382332] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.341384] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.602307] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.620870] can: netlink gateway (rev 20130117) max_hops=1 [ 2.628004] Key type dns_resolver registered [ 2.634470] ThumbEE CPU extension supported. [ 2.638902] Registering SWP/SWPB emulation handler [ 2.656136] usb1_vbus: supplied by vdd-sys-5v0 [ 2.681671] usb2_vbus: supplied by vdd-sys-5v0 [ 2.695150] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.717691] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.724450] [drm] No driver support for vblank timestamp query. [ 2.742413] mmc1: new high speed MMC card at address 0001 [ 2.751269] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.759817] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.768388] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.776862] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.786337] mmcblk1: p1 [ 2.903940] Console: switching to colour frame buffer device 240x75 [ 2.990336] drm drm: fb0: frame buffer device [ 3.007272] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.022186] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.027823] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.036666] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.052381] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.062716] hub 1-0:1.0: USB hub found [ 3.066751] hub 1-0:1.0: 1 port detected [ 3.076800] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.090325] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.152266] dvdd_ts: disabling [ 3.155366] usb1_vbus: disabling [ 3.158722] vdd_cam_1v8_reg: disabling [ 3.166168] Waiting for root device /dev/mmcblk0p1... [ 3.377423] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.342325] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 60.672170] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.910607] Bluetooth: RFCOMM socket layer initialized [ 2.915830] Bluetooth: RFCOMM ver 1.11 [ 2.919783] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.925180] Bluetooth: BNEP socket layer initialized [ 2.930284] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.936285] Bluetooth: HIDP socket layer initialized [ 2.943251] Key type dns_resolver registered [ 2.952817] Registering SWP/SWPB emulation handler [ 2.968045] usb1_vbus: supplied by vdd-sys-5v0 [ 2.976093] usb2_vbus: supplied by vdd-sys-5v0 [ 2.987314] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.013074] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.019847] [drm] No driver support for vblank timestamp query. [ 3.198287] Console: switching to colour frame buffer device 240x75 [ 3.285506] drm drm: fb0: frame buffer device [ 3.319362] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.328652] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.334472] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.344878] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.369372] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.384022] hub 1-0:1.0: USB hub found [ 3.388045] hub 1-0:1.0: 1 port detected [ 3.401560] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.416921] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.505293] dvdd_ts: disabling [ 3.508400] usb1_vbus: disabling [ 3.511789] vdd_cam_1v8_reg: disabling [ 3.516459] ALSA device list: [ 3.519527] #0: NVIDIA Tegra Dalmore [ 3.525378] Waiting for root device /dev/mmcblk0p1... [ 3.709377] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.743474] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.848326] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.829313] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.836111] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.845741] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.877916] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.879101] usbcore: registered new interface driver usbhid [ 1.883322] usbhid: USB HID core driver [ 1.890942] NET: Registered protocol family 10 [ 1.892094] sit: IPv6 over IPv4 tunneling driver [ 1.898231] NET: Registered protocol family 17 [ 1.900579] NET: Registered protocol family 15 [ 1.905081] Key type dns_resolver registered [ 1.909377] Registering SWP/SWPB emulation handler [ 1.920224] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.920493] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.940100] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.944334] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.954214] mmc1: new DDR MMC card at address 0001 [ 1.958836] max98090 1-0010: MAX98090 REVID=0x43 [ 1.963527] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.967951] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.973822] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.979940] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.986520] mmcblk1: p1 p2 [ 1.988125] max98090 1-0010: use default 2.8v micbias [ 1.999717] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.003717] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.040345] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.058196] VDD10_HDMI_1.0V: disabling [ 2.058899] vdd_g3d: disabling [ 2.059970] BUCK8_2.8V: disabling [ 2.06f982] ALSA device list: [ 2.065587] #0: Odroid-U3 [ 2.069295] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.969481] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.975992] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.983988] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.995127] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.003224] ldo9: bypassed regulator has no supply! [ 2.008342] ldo9: failed to get the current voltage(-517) [ 2.014014] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.029402] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.035661] smsc95xx v1.0.4 [ 2.055043] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.061424] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.088114] smps9: Bringing 0uV into 2100000-2100000uV [ 2.099379] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 32:a8:46:eb:c1:de [ 2.119346] ldo9: bypassed regulator has no supply! [ 2.124466] ldo9: failed to get the current voltage(-517) [ 2.130132] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.144178] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.177824] smps9: Bringing 0uV into 2100000-2100000uV [ 2.196562] ldo9: bypassed regulator has no supply! [ 2.201684] ldo9: failed to get the current voltage(-517) [ 2.207344] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.221816] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:14:23 UTC (946689263) [ 2.237421] pbias_mmc_omap5: disabling [ 2.241362] vmmcsdio_fixed: disabling [ 2.245930] Waiting for root device /dev/mmcblk1p2... [ 2.359288] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.495163] hub 1-2:1.0: USB hub found [ 2.499179] hub 1-2:1.0: 3 ports detected [ 2.504973] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.533041] smps9: Bringing 0uV into 2100000-2100000uV [ 2.551798] ldo9: bypassed regulator has no supply! [ 2.556922] ldo9: failed to get the current voltage(-517) [ 2.562582] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:10]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.933982] mmc0: new high speed MMC card at address 0001 [ 1.940020] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.944936] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.951282] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.960314] smps9: Bringing 0uV into 2100000-2100000uV [ 1.968425] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.974963] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.982982] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.994075] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.002125] smsc95xx v1.0.4 [ 2.005177] ldo9: bypassed regulator has no supply! [ 2.010300] ldo9: failed to get the current voltage(-517) [ 2.015970] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031190] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.053641] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 52:57:12:6d:bc:eb [ 2.066038] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.072442] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.102914] smps9: Bringing 0uV into 2100000-2100000uV [ 2.121618] ldo9: bypassed regulator has no supply! [ 2.126739] ldo9: failed to get the current voltage(-517) [ 2.132409] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.146930] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:11:58 UTC (946689118) [ 2.162542] pbias_mmc_omap5: disabling [ 2.166482] vmmcsdio_fixed: disabling [ 2.171082] Waiting for root device /dev/mmcblk1p2... [ 2.309281] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.445066] hub 1-2:1.0: USB hub found [ 2.449077] hub 1-2:1.0: 3 ports detected [ 2.454926] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.483032] smps9: Bringing 0uV into 2100000-2100000uV [ 2.501778] ldo9: bypassed regulator has no supply! [ 2.506899] ldo9: failed to get the current voltage(-517) [ 2.512564] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.396559] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.396565] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.396570] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.396574] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.396581] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.516243] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.522546] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.529415] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.539017] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.548515] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.555554] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.576160] smps9: Bringing 0uV into 2100000-2100000uV [ 2.604886] ldo9: bypassed regulator has no supply! [ 2.610017] ldo9: failed to get the current voltage(-517) [ 2.615701] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.635578] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.641885] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.648761] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.658360] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.667860] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.674887] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.681023] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.687341] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.694183] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.703768] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.713260] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.720300] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.766234] hctosys: unable to open rtc device (rtc0) [ 2.771533] sr_init: No PMIC hook to init smartreflex [ 2.777061] sr_init: platform driver register failed for SR [ 2.805577] pbias_mmc_omap5: disabling [ 2.809525] vmmcsdio_fixed: disabling [ 2.815726] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:03]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.522408] isl29018 7-0044: No cache defaults, reading back from HW [ 1.528752] isl29018 7-0044: Failed to read 1: -6 [ 1.533336] isl29018 7-0044: regmap initialization fails: -6 [ 1.543563] NET: Registered protocol family 10 [ 1.548008] sit: IPv6 over IPv4 tunneling driver [ 1.551595] NET: Registered protocol family 17 [ 1.555595] can: controller area network core (rev 20120528 abi 9) [ 1.561781] NET: Registered protocol family 29 [ 1.566174] can: raw protocol (rev 20120528) [ 1.570423] can: broadcast manager protocol (rev 20120528 t) [ 1.576066] can: netlink gateway (rev 20130117) max_hops=1 [ 1.581789] Key type dns_resolver registered [ 1.586117] ThumbEE CPU extension supported. [ 1.590015] Registering SWP/SWPB emulation handler [ 1.599819] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605304] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611664] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617039] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627120] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637330] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.642773] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.652960] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659140] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664518] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674237] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696294] Waiting for root device /dev/mmcblk0p1... [ 1.700140] mmc0: tuning execution failed: -5 [ 1.704234] mmc0: error -5 whilst initialising MMC card [ 2.572224] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586197] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591654] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598026] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603409] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:46]: got exception: timeout ~$off

[PYBOOT] [pi 01:48]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.522376] isl29018 7-0044: No cache defaults, reading back from HW [ 1.528720] isl29018 7-0044: Failed to read 1: -6 [ 1.533304] isl29018 7-0044: regmap initialization fails: -6 [ 1.543535] NET: Registered protocol family 10 [ 1.547980] sit: IPv6 over IPv4 tunneling driver [ 1.551560] NET: Registered protocol family 17 [ 1.555562] can: controller area network core (rev 20120528 abi 9) [ 1.561749] NET: Registered protocol family 29 [ 1.566141] can: raw protocol (rev 20120528) [ 1.570390] can: broadcast manager protocol (rev 20120528 t) [ 1.576032] can: netlink gateway (rev 20130117) max_hops=1 [ 1.581755] Key type dns_resolver registered [ 1.586078] ThumbEE CPU extension supported. [ 1.589982] Registering SWP/SWPB emulation handler [ 1.599779] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605265] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611621] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.616998] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627078] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637277] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.642724] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.652908] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659091] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664468] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674188] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696248] Waiting for root device /dev/mmcblk0p1... [ 1.700099] mmc0: tuning execution failed: -5 [ 1.704193] mmc0: error -5 whilst initialising MMC card [ 2.572195] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586169] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591630] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598002] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603385] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:55]: got exception: timeout ~$off

[PYBOOT] [pi 01:57]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.947265] ledtrig-cpu: registered to indicate activity on CPUs [ 1.953735] usbcore: registered new interface driver usbhid [ 1.959320] usbhid: USB HID core driver [ 1.968749] NET: Registered protocol family 10 [ 1.974243] sit: IPv6 over IPv4 tunneling driver [ 1.979553] NET: Registered protocol family 17 [ 1.984039] can: controller area network core (rev 20120528 abi 9) [ 1.990295] NET: Registered protocol family 29 [ 1.994750] can: raw protocol (rev 20120528) [ 1.999023] can: broadcast manager protocol (rev 20120528 t) [ 2.004699] can: netlink gateway (rev 20130117) max_hops=1 [ 2.010742] Key type dns_resolver registered [ 2.015258] ThumbEE CPU extension supported. [ 2.019561] Registering SWP/SWPB emulation handler [ 2.030426] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.037231] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.046478] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.053497] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.060485] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.067474] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.081390] db8500-esram12: disabling [ 2.085174] db8500-esram34: disabling [ 2.089324] V-CSI/DSI: disabling [ 2.092590] mmci-reg: disabling [ 2.096343] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.102325] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.108795] Waiting for root device /dev/mmcblk0p4... [ 2.148742] mmc3: new high speed MMC card at address 0001 [ 2.154754] mmcblk3: mmc3:0001 3.53 GiB [ 2.158966] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.164581] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.170196] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.176666] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:01]: got exception: timeout ~$off

[PYBOOT] [snowball 02:02]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.558746] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.569488] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.579467] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.590148] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.613098] NET: Registered protocol family 10 [ 2.628723] sit: IPv6 over IPv4 tunneling driver [ 2.634674] NET: Registered protocol family 17 [ 2.639221] NET: Registered protocol family 35 [ 2.643829] NET: Registered protocol family 37 [ 2.648376] Registering SWP/SWPB emulation handler [ 2.665100] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.671630] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.678314] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.690734] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-28 19:43:39 UTC (956951019) [ 2.699981] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.707031] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.714050] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.721069] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.734771] db8500-esram12: disabling [ 2.738525] db8500-esram34: disabling [ 2.742431] V-CSI/DSI: disabling [ 2.745697] mmci-reg: disabling [ 2.748992] ALSA device list: [ 2.751983] #0: MOP500-card [ 2.755310] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.761291] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.767486] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done.