next boot: 26 passed 7 failed (next/next-20140514) - Kernel-build-reports

14 May 2014


      Failed boards:
cubie        sunxi_defconfig               :	FAILED	1:03.09
    cubie        multi_v7_defconfig            :	FAILED	1:01.10
    cubie2       sunxi_defconfig               :	FAILED	1:00.85
    cubie2       multi_v7_defconfig            :	FAILED	0:59.52
    cubie2       multi_lpae_defconfig          :	FAILED	0:58.97
    panda        multi_v7_defconfig            :	FAILED	1:36.63
    snowball     multi_v7_defconfig            :	FAILED	1:07.57
Successful boards:
apc          vt8500_v6_v7_defconfig        :	passed	1:14.60
    arndale      exynos_defconfig              :	passed	1:10.66
    bbb          omap2plus_defconfig           :	passed	1:38.58
    bbb          multi_v7_defconfig            :	passed	1:22.28
    beaver       tegra_defconfig               :	passed	0:57.97
    beaver       multi_v7_defconfig            :	passed	0:49.93
    capri        bcm_defconfig                 :	passed	0:43.84
    capri        multi_v7_defconfig            :	passed	0:44.99
    dalmore      tegra_defconfig               :	passed	1:24.39
    dalmore      multi_v7_defconfig            :	passed	1:15.54
    dalmore      multi_lpae_defconfig          :	passed	1:21.60
    hummingboard imx_v6_v7_defconfig           :	passed	1:17.51
    hummingboard multi_v7_defconfig            :	passed	1:04.95
    omap5uevm    omap2plus_defconfig           :	passed	1:06.36
    omap5uevm    multi_v7_defconfig            :	passed	1:43.30
    omap5uevm    multi_lpae_defconfig          :	passed	1:39.99
    panda        omap2plus_defconfig           :	warnings	1:13.97
    sama5        sama5_defconfig               :	passed	1:54.88
    seaboard     tegra_defconfig               :	passed	1:02.15
    seaboard     multi_v7_defconfig            :	passed	1:12.58
    snow         exynos_defconfig              :	passed	1:28.75
    snowball     u8500_defconfig               :	passed	2:13.64
    trimslice    tegra_defconfig               :	passed	1:02.85
    trimslice    multi_v7_defconfig            :	passed	0:57.59
    wandboard    imx_v6_v7_defconfig           :	passed	1:02.51
    wandboard    multi_v7_defconfig            :	passed	0:58.23
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie-multi_v7_defconfig failure log:
    -------------------------------------------------
sun4i#tftp 0x42000000 next/next-20140514/multi_v7_defconfig/zImage
tftp 0x42000000 next/next-20140514/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.139
Filename 'next/next-20140514/multi_v7_defconfig/zImage'.
Load address: 0x42000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ##########################################################
     3 MiB/s
done
Bytes transferred = 4666320 (4733d0 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x48000000 next/next-20140514/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x48000000 next/next-20140514/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.139
Filename 'next/next-20140514/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x48000000
Loading: *##
     2.9 MiB/s
done
Bytes transferred = 15184 (3b50 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x42000000 - 0x48000000
bootz 0x42000000 - 0x48000000
Kernel image @ 0x42000000 [ 0x000000 - 0x4733d0 ]
## Flattened Device Tree blob at 48000000
   Booting using the fdt blob at 0x48000000
   Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log:
    -------------------------------------------------
DHCP client bound to address 172.16.1.139
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x42000000 next/next-20140514/sunxi_defconfig/zImage
tftp 0x42000000 next/next-20140514/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.139
Filename 'next/next-20140514/sunxi_defconfig/zImage'.
Load address: 0x42000000
Loading: *#################################################################
     #############################################################
     2.8 MiB/s
done
Bytes transferred = 1845720 (1c29d8 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x48000000 next/next-20140514/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x48000000 next/next-20140514/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.139
Filename 'next/next-20140514/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x48000000
Loading: *##
     2.4 MiB/s
done
Bytes transferred = 15184 (3b50 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x42000000 - 0x48000000
bootz 0x42000000 - 0x48000000
Kernel image @ 0x42000000 [ 0x000000 - 0x1c29d8 ]
## Flattened Device Tree blob at 48000000
   Booting using the fdt blob at 0x48000000
   Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log:
    -------------------------------------------------
sun7i# tftp 0x42000000 next/next-20140514/multi_lpae_defconfig/zImage
tftp 0x42000000 next/next-20140514/multi_lpae_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.117
Filename 'next/next-20140514/multi_lpae_defconfig/zImage'.
Load address: 0x42000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ############################################################
     3.9 MiB/s
done
Bytes transferred = 4694816 (47a320 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x44000000 next/next-20140514/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x44000000 next/next-20140514/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.117
Filename 'next/next-20140514/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x44000000
Loading: *##
     3.5 MiB/s
done
Bytes transferred = 18501 (4845 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x42000000 - 0x44000000
bootz 0x42000000 - 0x44000000
Kernel image @ 0x42000000 [ 0x000000 - 0x47a320 ]
## Flattened Device Tree blob at 44000000
   Booting using the fdt blob at 0x44000000
   Loading Device Tree to 40ff8000, end 40fff844 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log:
    -------------------------------------------------
tftp 0x42000000 next/next-20140514/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.117
Filename 'next/next-20140514/multi_v7_defconfig/zImage'.
Load address: 0x42000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ##########################################################
     4.4 MiB/s
done
Bytes transferred = 4666320 (4733d0 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x44000000 next/next-20140514/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x44000000 nenode: cubie2          status: on
xt/next-20140514/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.117
Filename 'next/next-20140514/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x44000000
Loading: *##
     3.5 MiB/s
done
Bytes transferred = 18501 (4845 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x42000000 - 0x44000000
bootz 0x42000000 - 0x44000000
Kernel image @ 0x42000000 [ 0x000000 - 0x4733d0 ]
## Flattened Device Tree blob at 44000000
   Booting using the fdt blob at 0x44000000
   Loading Device Tree to 40ff8000, end 40fff844 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log:
    -------------------------------------------------
DHCP client bound to address 172.16.1.117
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x42000000 next/next-20140514/sunxi_defconfig/zImage
tftp 0x42000000 next/next-20140514/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.117
Filename 'next/next-20140514/sunxi_defconfig/zImage'.
Load address: 0x42000000
Loading: *#################################################################
     #############################################################
     4.4 MiB/s
done
Bytes transferred = 1845720 (1c29d8 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x44000000 next/next-20140514/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x44000000 next/next-20140514/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.117
Filename 'next/next-20140514/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x44000000
Loading: *##
     3.5 MiB/s
done
Bytes transferred = 18501 (4845 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x42000000 - 0x44000000
bootz 0x42000000 - 0x44000000
Kernel image @ 0x42000000 [ 0x000000 - 0x1c29d8 ]
## Flattened Device Tree blob at 44000000
   Booting using the fdt blob at 0x44000000
   Loading Device Tree to 40ff8000, end 40fff844 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log:
    -------------------------------------------------
[    1.687591] usbhid: USB HID core driver
[    1.695953] TCP: cubic registered
[    1.699462] NET: Registered protocol family 17
[    1.704315] Key type dns_resolver registered
[    1.709289] Power Management for TI OMAP4+ devices.
[    1.714447] Power Management for TI OMAP4.
[    1.718780] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[    1.726135] ThumbEE CPU extension supported.
[    1.726135] Registering SWP/SWPB emulation handler
[    1.736907] vwl1271: 1800 mV 
[    1.741210] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[    1.750946] twl 0-0048: PIH (irq 39) nested IRQs
[    1.756622] twl_rtc rtc.15: Power up reset detected.
[    1.762512] twl_rtc rtc.15: Enabling TWL-RTC
[    1.769592] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0
[    1.776428] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV 
[    1.782531] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV 
[    1.788726] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV 
[    1.794799] VMMC: 1200 <--> 3000 mV at 3000 mV 
[    1.800354] VPP: 1800 <--> 2500 mV at 1900 mV 
[    1.805816] VUSIM: 1200 <--> 2900 mV at 1800 mV 
[    1.811309] VDAC: 1800 mV 
[    1.811309] VANA: 2100 mV 
[    1.818176] VCXIO: 1800 mV 
[    1.818176] VUSB: 3300 mV 
[    1.825134] V1V8: 1800 mV 
[    1.828735] V2V1: 2100 mV 
[    1.906188] usb 1-1: new high-speed USB device number 2 using ehci-omap
[    2.057098] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[    2.064605] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
[    2.072052] hub 1-1:1.0: USB hub found
[    2.076232] hub 1-1:1.0: 5 ports detected
[    2.082702] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
[    2.090118] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
[    2.098083] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[    2.534759] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[    2.731353] smsc95xx v1.0.4
[    3.075988] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 56:6e:ec:58:c2:c9
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log:
    -------------------------------------------------
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.112
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x01000000 tmp/snowball-Yo5fuf/tmpvboqfT-uImage
tftp 0x01000000 tmp/snowball-Yo5fuf/tmpvboqfT-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.112
Filename 'tmp/snowball-Yo5fuf/tmpvboqfT-uImage'.
Load address: 0x1000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #############################################################
done
Bytes transferred = 4707629 (47d52d hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x01000000  
bootm 0x01000000  
## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4707565 Bytes =  4.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout