next boot: 23 passed 10 failed (next/next-20140331) - Kernel-build-reports

1 Apr 2014


      Failed boards:
cubie        multi_v7_defconfig            :	FAILED	1:07.01
    cubie2       sunxi_defconfig               :	FAILED	1:18.43
    cubie2       multi_v7_defconfig            :	FAILED	1:04.56
    cubie2       multi_lpae_defconfig          :	FAILED	0:59.33
    hummingboard imx_v6_v7_defconfig           :	FAILED	2:58.15
    hummingboard multi_v7_defconfig            :	FAILED	1:01.92
    panda        multi_v7_defconfig            :	FAILED	1:36.60
    snowball     multi_v7_defconfig            :	FAILED	1:14.53
    wandboard    imx_v6_v7_defconfig           :	FAILED	2:55.45
    wandboard    multi_v7_defconfig            :	FAILED	0:59.92
Successful boards:
apc          vt8500_v6_v7_defconfig        :	passed	1:13.74
    arndale      exynos_defconfig              :	passed	1:04.13
    bbb          omap2plus_defconfig           :	passed	1:31.99
    bbb          multi_v7_defconfig            :	passed	1:15.79
    beaver       tegra_defconfig               :	passed	0:50.35
    beaver       multi_v7_defconfig            :	passed	0:50.87
    capri        bcm_defconfig                 :	passed	0:43.00
    capri        multi_v7_defconfig            :	passed	0:44.35
    cubie        sunxi_defconfig               :	passed	0:53.34
    dalmore      tegra_defconfig               :	passed	1:19.53
    dalmore      multi_v7_defconfig            :	passed	1:17.74
    dalmore      multi_lpae_defconfig          :	passed	1:19.10
    omap5uevm    omap2plus_defconfig           :	warnings	1:00.20
    omap5uevm    multi_v7_defconfig            :	warnings	1:43.61
    omap5uevm    multi_lpae_defconfig          :	warnings	1:39.19
    panda        omap2plus_defconfig           :	warnings	1:16.41
    sama5        sama5_defconfig               :	passed	1:52.33
    seaboard     tegra_defconfig               :	passed	1:02.81
    seaboard     multi_v7_defconfig            :	passed	1:13.57
    snow         exynos_defconfig              :	passed	1:29.91
    snowball     u8500_defconfig               :	passed	1:24.72
    trimslice    tegra_defconfig               :	passed	1:02.21
    trimslice    multi_v7_defconfig            :	passed	0:56.60
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie-multi_v7_defconfig failure log:
    -------------------------------------------------
tftp 0x40008000 next/next-20140331/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.145
Filename 'next/next-20140331/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ########################################################
     2.9 MiB/s
done
Bytes transferred = 4635392 (46bb00 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 next/next-20140331/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 next/next-20140331/multi_vnode: cubie           status: on
7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.145
Filename 'next/next-20140331/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *##
     706.1 KiB/s
done
Bytes transferred = 15184 (3b50 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x46bb00 ]
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log:
    -------------------------------------------------
tftp 0x40008node: cubie2          status: on
000 next/next-20140331/multi_lpae_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.161
Filename 'next/next-20140331/multi_lpae_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ##########################################################
     3.9 MiB/s
done
Bytes transferred = 4660168 (471bc8 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 next/next-20140331/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 next/next-20140331/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.161
Filename 'next/next-20140331/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *##
     597.7 KiB/s
done
Bytes transferred = 18361 (47b9 hex)
sun7i#printenv bootargs
 printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x471bc8 ]
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff8000, end 40fff7b8 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log:
    -------------------------------------------------
tftp 0x40008000 next/next-20140331/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.161
Filename 'next/next-20140331/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ########################################################
     3.8 MiB/s
done
Bytes transferred = 4635392 (46bb00 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3node: cubie2          status: on
sun7i# tftp 0x41000000 next/next-20140331/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 next/next-20140331/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.161
Filename 'next/next-20140331/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *##
     716.8 KiB/s
done
Bytes transferred = 18361 (47b9 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x46bb00 ]
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff8000, end 40fff7b8 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log:
    -------------------------------------------------
[    0.017733] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral
[    0.017756] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    0.017768] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral
[    0.017788] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    0.017801] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral
[    0.018748] Switched to clocksource arch_sys_counter
[    0.025864] NET: Registered protocol family 2
[    0.026331] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.026418] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.026538] TCP: Hash tables configured (established 8192 bind 8192)
[    0.026623] TCP: reno registered
[    0.026637] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.026695] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.026894] NET: Registered protocol family 1
[    0.027291] RPC: Registered named UNIX socket transport module.
[    0.027303] RPC: Registered udp transport module.
[    0.027309] RPC: Registered tcp transport module.
[    0.027315] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.028280] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.028829] bounce pool size: 64 pages
[    0.036561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.036580] io scheduler noop registered
[    0.036587] io scheduler deadline registered
[    0.036773] io scheduler cfq registered (default)
[    0.038400] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.080482] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.082920] console [ttyS0] disabled
[    0.103124] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[    0.609412] console [ttyS0] enabled
[    0.614125] mousedev: PS/2 mouse device common for all mice
[    0.620013] i2c /dev entries driver
[    0.624803] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    0.633800] TCP: cubic registered
[    0.637121] NET: Registered protocol family 17
[    0.641687] Registering SWP/SWPB emulation handler
[    0.647405] ahci-5v: 5000 mV 
[    0.650696] usb1-vbus: 5000 mV 
[    0.654064] usb2-vbus: 5000 mV 
~$off
# PYBOOT: Exception: timeout
========================================================================
Board hummingboard-imx_v6_v7_defconfig failure log:
    -------------------------------------------------
[<800121ac>] (dump_backtrace) from [<80012490>] (show_stack+0x18/0x1c)
 r6:80907b98 r5:80907b98 r4:00000000 r3:9f4ad7c0
[<80012478>] (show_stack) from [<8065da58>] (dump_stack+0x8c/0xa4)
[<8065d9cc>] (dump_stack) from [<80659f8c>] (print_usage_bug+0x260/0x2d0)
 r6:9f4ad7c0 r5:807ce078 r4:80a06860 r3:9f4ad7c0
[<80659d2c>] (print_usage_bug) from [<80064bb8>] (mark_lock+0x1e0/0x6b0)
 r9:80064160 r8:00000004 r7:9f4ad7c0 r6:00001054 r5:9f4adc68 r4:00000006
[<800649d8>] (mark_lock) from [<80065a1c>] (__lock_acquire+0x390/0x1cdc)
 r10:809e6b70 r9:000001df r8:80907c7c r7:80e377ec r6:9f4ad7c0 r5:9f5ca030
 r4:9fbd335c r3:00000004
[<8006568c>] (__lock_acquire) from [<80067b64>] (lock_acquire+0x70/0x84)
 r10:00000001 r9:00000000 r8:808ead2c r7:00000001 r6:9f5ca000 r5:00000000
 r4:60000013
[<80067af4>] (lock_acquire) from [<805b9b4c>] (mld_sendpack+0x428/0x774)
 r7:0000004c r6:805ba50c r5:8093d940 r4:9fbd3238
[<805b9724>] (mld_sendpack) from [<805ba50c>] (mld_send_initial_cr.part.38+0x9c/0xb0)
 r10:00000000 r9:9ee170d0 r8:00000000 r7:00000001 r6:9eff0cc0 r5:9edf4ea8
 r4:00000000
[<805ba470>] (mld_send_initial_cr.part.38) from [<805bda3c>] (ipv6_mc_dad_complete+0x34/0x5c)
 r9:00000000 r8:9ee170d0 r7:9efb9a00 r6:9efb9a20 r5:9f43e000 r4:9ee17000
[<805bda08>] (ipv6_mc_dad_complete) from [<805a10a8>] (addrconf_dad_completed+0xfc/0x1a8)
 r4:9efb9a00 r3:9f4ad7c0
[<805a0fac>] (addrconf_dad_completed) from [<805a1358>] (addrconf_dad_work+0x204/0x31c)
 r5:9efb9a1c r4:9efb9a74
[<805a1154>] (addrconf_dad_work) from [<800403d0>] (process_one_work+0x19c/0x45c)
 r9:00000001 r8:9fbd3000 r7:9f5cbeb0 r6:9fbcd5c0 r5:9efb9a74 r4:9f5ac800
[<80040234>] (process_one_work) from [<800411e8>] (worker_thread+0x11c/0x3c4)
 r10:9fbcd5c0 r9:80946936 r8:9f5ca000 r7:9f5ca030 r6:9f5ac818 r5:9fbcd5f0
 r4:9f5ac800
[<800410cc>] (worker_thread) from [<8004749c>] (kthread+0xdc/0xf8)
 r10:00000000 r9:00000000 r8:00000000 r7:800410cc r6:9f5ac800 r5:00000000
 r4:9f5b03c0
[<800473c0>] (kthread) from [<8000e9c8>] (ret_from_fork+0x14/0x2c)
 r7:00000000 r6:00000000 r5:800473c0 r4:9f5b03c0
INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=2102 jiffies, g=1204, c=1203, q=9)
INFO: Stall ended before state dump start
INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=8407 jiffies, g=1204, c=1203, q=9)
INFO: Stall ended before state dump start
~$off
# PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log:
    -------------------------------------------------
C1 U-Boot >tftp 0x10800000 next/next-20140331/multi_v7_defconfig/zImage
 tftp 0x10800000 next/next-20140331/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.163
Filename 'next/next-20140331/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ########################################################
     1.9 MiB/s
done
Bytes transferred = 4635392 (46bb00 hex)
C1 U-Boot > setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
C1 U-Boot > tftp 0x11000000 next/next-20140331/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb
tftp 0x11000000 next/next-20140331/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.163
Filename 'next/next-20140331/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'.
Load address: 0x11000000
Loading: *##
     429.7 KiB/s
done
Bytes transferred = 25988 (6584 hex)
C1 U-Boot > printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
C1 U-Boot >bootz 0x10800000 - 0x11000000
 bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x46bb00 ]
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11009583
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log:
    -------------------------------------------------
[    1.585144] USB Video Class driver (1.1.1)
[    1.589447] gspca_main: v2.14.0 registered
[    1.595825] sdhci: Secure Digital Host Controller Interface driver
[    1.602325] sdhci: Copyright(c) Pierre Ossman
[    1.607635] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517
[    1.614562] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[    1.622253] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517
[    1.629180] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral
[    1.637054] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.643951] usbcore: registered new interface driver usbhid
[    1.649810] usbhid: USB HID core driver
[    1.657775] TCP: cubic registered
[    1.661285] NET: Registered protocol family 17
[    1.666107] Key type dns_resolver registered
[    1.671051] Power Management for TI OMAP4+ devices.
[    1.676208] Power Management for TI OMAP4.
[    1.680511] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[    1.687652] Registering SWP/SWPB emulation handler
[    1.693572] vwl1271: 1800 mV 
[    1.698242] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[    1.707946] twl 0-0048: PIH (irq 39) nested IRQs
[    1.713623] twl_rtc rtc.15: Power up reset detected.
[    1.719482] twl_rtc rtc.15: Enabling TWL-RTC
[    1.726318] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0
[    1.733276] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV 
[    1.739410] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV 
[    1.745452] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV 
[    1.751525] VMMC: 1200 <--> 3000 mV at 3000 mV 
[    1.757080] VPP: 1800 <--> 2500 mV at 1900 mV 
[    1.762542] VUSIM: 1200 <--> 2900 mV at 1800 mV 
[    1.767517] VDAC: 1800 mV 
[    1.770843] VANA: 2100 mV 
[    1.774841] VCXIO: 1800 mV 
[    1.774841] VUSB: 3300 mV 
[    1.781799] V1V8: 1800 mV 
[    1.785400] V2V1: 2100 mV 
[    1.791442] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[   11.959564] [sched_delayed] sched: RT throttling activated
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log:
    -------------------------------------------------
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.129
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-pxpTCl/tmpf5qx9F-uImage
tftp 0x00100000 tmp/snowball-pxpTCl/tmpf5qx9F-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'tmp/snowball-pxpTCl/tmpf5qx9F-uImage'.
Load address: 0x100000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###########################################################
done
Bytes transferred = 4676705 (475c61 hex)
U8500 $printenv bootargs
 printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000  
bootm 0x00100000  
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4676641 Bytes =  4.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log:
    -------------------------------------------------
stack backtrace:
CPU: 0 PID: 33 Comm: kworker/0:1 Not tainted 3.14.0-rc8-next-20140331 #1
Workqueue: ipv6_addrconf addrconf_dad_work
Backtrace: 
[<800121ac>] (dump_backtrace) from [<80012490>] (show_stack+0x18/0x1c)
 r6:80907b98 r5:80907b98 r4:00000000 r3:ee1f4e00
[<80012478>] (show_stack) from [<8065da58>] (dump_stack+0x8c/0xa4)
[<8065d9cc>] (dump_stack) from [<80659f8c>] (print_usage_bug+0x260/0x2d0)
 r6:ee1f4e00 r5:807ce078 r4:80a08d90 r3:ee1f4e00
[<80659d2c>] (print_usage_bug) from [<80064bb8>] (mark_lock+0x1e0/0x6b0)
 r9:80064160 r8:00000004 r7:ee1f4e00 r6:00001054 r5:ee1f52a8 r4:00000006
[<800649d8>] (mark_lock) from [<80065a1c>] (__lock_acquire+0x390/0x1cdc)
 r10:809e6b70 r9:00000202 r8:80907c7c r7:80e377ec r6:ee1f4e00 r5:ee26e030
 r4:ee7ac55c r3:00000004
[<8006568c>] (__lock_acquire) from [<80067b64>] (lock_acquire+0x70/0x84)
 r10:00000001 r9:00000000 r8:808ead2c r7:00000001 r6:ee26e000 r5:00000000
 r4:60000013
[<80067af4>] (lock_acquire) from [<805b9b4c>] (mld_sendpack+0x428/0x774)
 r7:0000004c r6:805ba50c r5:8093d940 r4:ee7ac438
[<805b9724>] (mld_sendpack) from [<805ba50c>] (mld_send_initial_cr.part.38+0x9c/0xb0)
 r10:00000000 r9:ed420cd0 r8:00000000 r7:00000001 r6:edbdaa80 r5:ee0f0968
 r4:00000000
[<805ba470>] (mld_send_initial_cr.part.38) from [<805bda3c>] (ipv6_mc_dad_complete+0x34/0x5c)
 r9:00000000 r8:ed420cd0 r7:ed697600 r6:ed697620 r5:ed8d9000 r4:ed420c00
[<805bda08>] (ipv6_mc_dad_complete) from [<805a10a8>] (addrconf_dad_completed+0xfc/0x1a8)
 r4:ed697600 r3:ee1f4e00
[<805a0fac>] (addrconf_dad_completed) from [<805a1358>] (addrconf_dad_work+0x204/0x31c)
 r5:ed69761c r4:ed697674
[<805a1154>] (addrconf_dad_work) from [<800403d0>] (process_one_work+0x19c/0x45c)
 r9:00000001 r8:ee7ac200 r7:ee26feb0 r6:ee7a65c0 r5:ed697674 r4:ee21d880
[<80040234>] (process_one_work) from [<800411e8>] (worker_thread+0x11c/0x3c4)
 r10:ee7a65c0 r9:80946936 r8:ee26e000 r7:ee26e030 r6:ee21d898 r5:ee7a65f0
 r4:ee21d880
[<800410cc>] (worker_thread) from [<8004749c>] (kthread+0xdc/0xf8)
 r10:00000000 r9:00000000 r8:00000000 r7:800410cc r6:ee21d880 r5:00000000
 r4:ee21f700
[<800473c0>] (kthread) from [<8000e9c8>] (ret_from_fork+0x14/0x2c)
 r7:00000000 r6:00000000 r5:800473c0 r4:ee21f700
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log:
    -------------------------------------------------
=> tftp 0x10800000 next/next-20140331/multi_v7_defconfig/zImage
tftp 0x10800000 next/next-20140331/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.162
Filename 'next/next-20140331/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ########################################################
     6.1 MiB/s
done
Bytes transferred = 4635392 (46bb00 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 next/next-20140331/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 next/next-20140331/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.162
Filename 'next/next-20140331/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
     1.1 MiB/s
done
Bytes transferred = 29426 (72f2 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x46bb00 ]
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
~$off
# PYBOOT: Exception: timeout