Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.0-rc4-244-g1e16d24/

Failed boards:

bbb arm-multi_v7_defconfig : FAILED 1:49.19 colombus arm-multi_v7_defconfig : FAILED 1:02.62 cubox arm-multi_v7_defconfig : FAILED 3:43.26

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:23.10 arndale arm-exynos_defconfig : passed 1:29.04 bbb arm-omap2plus_defconfig : passed 1:39.97 beaver arm-tegra_defconfig : passed 1:06.91 beaver arm-multi_v7_defconfig : passed 1:03.54 capri arm-bcm_defconfig : passed 1:15.18 capri arm-multi_v7_defconfig : passed 1:44.51 chitra powerpc-pasemi_defconfig : passed 1:12.93 chitra powerpc-ppc64_defconfig : warnings 2:23.13 colombus arm-multi_lpae_defconfig : passed 1:14.89 cosmic arm-imx_v6_v7_defconfig : passed 2:08.26 cosmic arm-multi_v7_defconfig : passed 2:29.22 cubie arm-sunxi_defconfig : passed 1:06.39 cubie arm-multi_v7_defconfig : passed 1:14.96 cubie2 arm-sunxi_defconfig : passed 1:11.91 cubie2 arm-multi_v7_defconfig : passed 1:21.40 cubox arm-mvebu_v7_defconfig : passed 1:34.47 dalmore arm-tegra_defconfig : passed 1:27.16 dalmore arm-multi_v7_defconfig : passed 1:26.85 hummingboard arm-imx_v6_v7_defconfig : passed 1:33.46 jetsontk1 arm-tegra_defconfig : passed 0:57.77 jetsontk1 arm-multi_v7_defconfig : passed 0:58.85 jetsontk1 arm-multi_lpae_defconfig : passed 1:51.24 odroidu3 arm-exynos_defconfig : passed 1:03.09 omap5uevm arm-omap2plus_defconfig : passed 1:06.16 omap5uevm arm-multi_v7_defconfig : passed 1:18.53 omap5uevm arm-multi_lpae_defconfig : passed 1:38.98 pandaes arm-omap2plus_defconfig : warnings 1:40.75 pandaes arm-multi_v7_defconfig : passed 1:45.61 pi arm-exynos_defconfig : passed 0:55.43 pi arm-multi_v7_defconfig : passed 1:00.64 pi arm-multi_lpae_defconfig : passed 1:22.87 pit arm-exynos_defconfig : passed 0:57.81 pit arm-multi_v7_defconfig : passed 1:15.18 pit arm-multi_lpae_defconfig : passed 1:11.27 sama5 arm-sama5_defconfig : passed 1:27.67 seaboard arm-tegra_defconfig : passed 1:10.36 seaboard arm-multi_v7_defconfig : passed 1:47.79 snow arm-exynos_defconfig : passed 1:07.85 snowball arm-u8500_defconfig : warnings 3:30.74 snowball arm-multi_v7_defconfig : warnings 3:27.49 socfpga arm-socfpga_defconfig : passed 1:07.99 trimslice arm-tegra_defconfig : passed 0:59.50 wandboard arm-imx_v6_v7_defconfig : passed 1:14.74 wandboard arm-multi_v7_defconfig : passed 1:26.45

Offline boards:

arndale arm-multi_v7_defconfig : OFFLINE 1:33.01 arndale arm-multi_lpae_defconfig : OFFLINE 2:35.26 colombus arm-sunxi_defconfig : OFFLINE 1:26.69 cubie2 arm-multi_lpae_defconfig : OFFLINE 3:02.19 dalmore arm-multi_lpae_defconfig : OFFLINE 2:59.03 hummingboard arm-multi_v7_defconfig : OFFLINE 2:16.17 minnowmax x86-minnowmax_defconfig : OFFLINE 0:35.28 parallella arm-multi_v7_defconfig : OFFLINE 1:28.12 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:35.80 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:35.32 snow arm-multi_v7_defconfig : OFFLINE 1:17.59 snow arm-multi_lpae_defconfig : OFFLINE 0:46.32 socfpga arm-multi_v7_defconfig : OFFLINE 2:45.49 trimslice arm-multi_v7_defconfig : OFFLINE 1:56.31

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

Card did not respond to voltage select! mmc0(part 0) is current device mmc_send_cmd : timeout: No status update Card did not respond to voltage select! mmc_send_cmd : timeout: No status update mmc1(part 0) is current device mmc_send_cmd : timeout: No status update gpio: pin 54 (gpio 54) value is 1 SD/MMC found on device 1 reading uEnv.txt 993 bytes read in 4 ms (242.2 KiB/s) Importing environment from mmc ... gpio: pin 55 (gpio 55) value is 1 gpio: pin 56 (gpio 56) value is 1 Running uenvcmd ... reading zImage 3101768 bytes read in 357 ms (8.3 MiB/s) reading uInitrd 2469019 bytes read in 285 ms (8.3 MiB/s) reading /dtbs/am335x-boneblack.dtb 23334 bytes read in 10 ms (2.2 MiB/s) ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 2468955 Bytes = 2.4 MiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 815f0000 Booting using the fdt blob at 0x815f0000 Using Device Tree in place at 815f0000, end 815f8b25

Starting kernel ...

Uncompressing Linux... [PYBOOT] [bbb 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:47]: got exception: timeout ~$off

[PYBOOT] [bbb 01:48]: Done.

========================================================================

Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 0.318] fel key max not found, try old mode [ 0.318] no key found [ 0.325] dcdc1 3000 [ 0.325] dcdc2 1200 [ 0.325] dcdc4 1200 [ 0.326] dcdc5 1500 [ 0.329] flash init start [ 0.400] flash init finish [ 0.442] fs init ok [ 0.444] fattype FAT16 [ 0.445] fs mount ok [ 0.456] dram_para_set start [ 0.460] dram_para_set end [ 0.461] type=48 [ 0.497] 0

[PYBOOT] [colombus 00:57]: Timed out waiting for "<type 'str'>": [ 0.711] WRN:L229(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_type fail [ 0.716] WRN:L265(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_mode fail [ 0.726] WRN:L285(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.auto_hpd fail [ 0.736] lcd0_para.lcd_used=1 [ 0.740] lcd open [ 0.743] lcd 0 timeout=50 [ 0.805] lcd open,ret=0 [ 0.805] power status = 3 [ 0.805] power start cause = 0 [ 0.808] axp buffer 0x00000000 [ 0.811] power trigger [ 0.814] startup status = 1 [ 0.855] lcd 1 timeout=200 [ 0.968] ANX9804 Chip not found [ 0.981] ANX9804 clock is stable. [ 1.250] lcd 2 timeout=100 [ 1.350] lcd 3 timeout=0 [ 1.351] lcd 4 timeout=0

[PYBOOT] [colombus 00:58]: got exception: timeout ~$off

[PYBOOT] [colombus 00:59]: Done.

========================================================================

Board cubox-arm-multi_v7_defconfig failure log: -------------------------------------------------

Load address: 0x2000000 Loading: * TFTP error: 'File not found' (1) Starting again

error Using egiga0 device TFTP from server 172.16.1.7; our IP address is 172.16.1.183 Filename 'boot.scr'. Load address: 0x2000000 Loading: * TFTP error: 'File not found' (1) Starting again

error Using egiga0 device TFTP from server 172.16.1.7; our IP address is 172.16.1.183 Filename 'boot.scr'. Load address: 0x2000000 Loading: * TFTP error: 'File not found' (1) Starting again

error Using egiga0 device TFTP from server 172.16.1.7; our IP address is 172.16.1.183 Filename 'boot.scr'. Load address: 0x2000000 Loading: * TFTP error: 'File not found' (1) Starting again

error

[PYBOOT] [cubox 03:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubox 03:41]: got exception: timeout ~$off

[PYBOOT] [cubox 03:42]: Done.