Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v3.16-rc1-56-g3464a48/

Failed boards:

omap5uevm omap2plus_defconfig : FAILED 2:06.69 omap5uevm multi_lpae_defconfig : FAILED 2:07.36 snowball u8500_defconfig : FAILED 2:05.30

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:16.36 arndale exynos_defconfig : passed 1:17.88 arndale multi_v7_defconfig : passed 1:31.04 arndale multi_lpae_defconfig : passed 1:54.06 bbb omap2plus_defconfig : passed 1:31.04 bbb multi_v7_defconfig : passed 1:31.57 beaver tegra_defconfig : passed 1:00.22 beaver multi_v7_defconfig : passed 1:11.34 capri bcm_defconfig : passed 0:39.11 capri multi_v7_defconfig : passed 0:41.30 colombus multi_v7_defconfig : passed 1:06.33 colombus multi_lpae_defconfig : passed 1:03.78 cubie sunxi_defconfig : passed 1:20.45 cubie multi_v7_defconfig : passed 1:20.20 cubie2 sunxi_defconfig : passed 1:23.13 cubie2 multi_v7_defconfig : passed 1:31.36 cubie2 multi_lpae_defconfig : passed 1:10.18 cubox multi_v7_defconfig : passed 0:56.73 dalmore tegra_defconfig : passed 1:38.79 dalmore multi_v7_defconfig : passed 1:36.97 dalmore multi_lpae_defconfig : passed 1:29.27 hummingboard imx_v6_v7_defconfig : passed 1:19.29 hummingboard multi_v7_defconfig : passed 1:14.33 jetsontk1 tegra_defconfig : passed 1:05.55 jetsontk1 multi_v7_defconfig : passed 0:56.78 jetsontk1 multi_lpae_defconfig : passed 0:54.31 panda omap2plus_defconfig : warnings 1:48.35 panda multi_v7_defconfig : warnings 1:56.85 sama5 sama5_defconfig : warnings 1:46.93 seaboard tegra_defconfig : passed 1:08.21 seaboard multi_v7_defconfig : passed 1:18.02 snow exynos_defconfig : passed 0:58.85 snow multi_v7_defconfig : passed 0:59.72 snow multi_lpae_defconfig : passed 0:58.65 snowball multi_v7_defconfig : passed 4:36.24 trimslice tegra_defconfig : passed 1:00.58 wandboard imx_v6_v7_defconfig : passed 1:04.47 wandboard multi_v7_defconfig : passed 1:39.34

Offline boards:

colombus sunxi_defconfig : OFFLINE 0:49.42 omap5uevm multi_v7_defconfig : OFFLINE 2:28.34 trimslice multi_v7_defconfig : OFFLINE 2:10.56

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 47.072380] omap_vp_init: No PMIC info for vdd_core [ 47.072384] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072385] omap_vp_init: No PMIC info for vdd_mm [ 47.072388] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072390] omap_vp_init: No PMIC info for vdd_mpu [ 47.072713] ThumbEE CPU extension supported. [ 47.072727] Registering SWP/SWPB emulation handler [ 47.077407] palmas 0-0048: Irq flag is 0x00000000 [ 47.155670] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.162439] mmc0: new high speed MMC card at address 0001 [ 47.168321] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.173147] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.179408] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.186265] smps123: 600 <--> 1500 mV at 1060 mV [ 47.186278] mmcblk0: unknown partition table [ 47.191540] mmcblk0boot1: unknown partition table [ 47.192289] mmcblk0boot0: unknown partition table [ 47.206947] smps45: 600 <--> 1310 mV at 1030 mV [ 47.213369] smps6: 1200 mV [ 47.217336] smps7: 1800 mV [ 47.221444] smps8: 600 <--> 1310 mV at 1040 mV [ 47.227185] smps9: failed to get the current voltage [ 47.232429] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.244483] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371702] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516711] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522803] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530276] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537142] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.544860] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558312] ALSA device list: [ 47.561407] No soundcards found. [ 47.565407] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done.

========================================================================

Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------

[ 1.924329] omap_vc_init_channel: No PMIC info for vdd_core [ 1.924333] omap_vp_init: No PMIC info for vdd_core [ 1.924343] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.924347] omap_vp_init: No PMIC info for vdd_mm [ 1.924356] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.924359] omap_vp_init: No PMIC info for vdd_mpu [ 1.924911] ThumbEE CPU extension supported. [ 1.924936] Registering SWP/SWPB emulation handler [ 1.924948] SmartReflex Class3 initialized [ 1.953729] palmas 0-0048: Irq flag is 0x00000000 [ 2.032556] mmcblk0: unknown partition table [ 2.039451] mmcblk0boot1: unknown partition table [ 2.046400] mmcblk0boot0: unknown partition table [ 2.051476] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.103891] smps123: 600 <--> 1500 mV at 1060 mV [ 2.110932] smps45: 600 <--> 1310 mV at 1030 mV [ 2.118297] smps6: 1200 mV [ 2.123035] smps7: 1800 mV [ 2.127921] smps8: 600 <--> 1310 mV at 1040 mV [ 2.134333] smps9: failed to get the current voltage [ 2.140285] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.154659] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.163507] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.171282] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.177443] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.186564] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.195931] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.202885] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.211391] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.220035] sr_init: No PMIC hook to init smartreflex [ 2.225568] sr_init: platform driver register failed for SR [ 2.253942] pbias_mmc_omap5: disabling [ 2.259480] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done.

========================================================================

Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.597961] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.605255] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.616760] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.624572] HS USB OTG: no transceiver configured [ 3.629272] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.637115] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645050] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.656951] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664276] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675750] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684295] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696197] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703521] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.714996] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.722808] HS USB OTG: no transceiver configured [ 3.727508] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735382] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743286] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755218] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762542] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774017] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782531] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794433] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.801757] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813232] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821075] HS USB OTG: no transceiver configured [ 3.825775] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833618] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841522] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853454] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.860748] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872222] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.880737] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto

[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:03]: got exception: timeout ~$off

[PYBOOT] [snowball 02:04]: Done.