Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160921/
Failed boards:
beaver arm-tegra_defconfig : FAILED 1:43.70 beaver arm-multi_v7_defconfig : FAILED 1:46.32 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:56.55 capri bcm_defconfig : NO BUILD chitra powerpc-ppc64_defconfig : FAILED 1:57.59 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:25.70 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.73 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.54 omap5uevm arm-multi_lpae_defconfig : FAILED 2:06.99 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:36.46 pandaes arm-omap2plus_defconfig : FAILED 2:18.29 pandaes arm-multi_v7_defconfig : FAILED 2:08.88 pandaes arm-multi_v7_nosmp_defconfig : FAILED 2:19.91 pit arm-exynos_defconfig : FAILED 1:48.19 snowball arm-u8500_defconfig : FAILED 3:13.12 wandboard arm-multi_v7_defconfig : FAILED 1:46.07 wandboard arm-multi_v7_nosmp_defconfig : FAILED 2:18.96
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:24.74 arndale arm-exynos_defconfig : passed 3:17.93 arndale arm-multi_v7_defconfig : passed 1:50.04 arndale arm-multi_lpae_defconfig : passed 1:18.13 arndale arm-multi_v7_nosmp_defconfig : warnings 1:24.15 bbb arm-omap2plus_defconfig : passed 2:21.06 bbb arm-multi_v7_nosmp_defconfig : passed 1:26.89 beagleboard-x15 arm-omap2plus_defconfig : passed 0:51.57 beagleboard-x15 arm-multi_v7_defconfig : passed 0:47.24 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:51.67 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 0:56.64 capri arm-multi_v7_defconfig : passed 0:50.13 capri arm-multi_v7_nosmp_defconfig : warnings 0:55.20 chitra powerpc-pasemi_defconfig : passed 1:23.62 colombus arm-sunxi_defconfig : passed 2:21.94 colombus arm-multi_v7_defconfig : passed 2:38.28 colombus arm-multi_lpae_defconfig : passed 2:29.82 cosmic arm-imx_v6_v7_defconfig : passed 4:15.44 cosmic arm-multi_v7_defconfig : passed 3:13.75 cosmic arm-multi_v7_nosmp_defconfig : passed 2:59.28 cubie arm-sunxi_defconfig : passed 1:02.53 cubie arm-multi_v7_defconfig : passed 1:01.13 cubie arm-multi_v7_nosmp_defconfig : passed 1:06.59 cubie2 arm-sunxi_defconfig : passed 0:58.89 cubie2 arm-multi_v7_defconfig : passed 1:04.01 cubie2 arm-multi_lpae_defconfig : passed 1:10.03 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:58.62 cubox arm-multi_v7_defconfig : passed 1:13.75 cubox arm-mvebu_v7_defconfig : passed 1:09.02 cubox arm-multi_v7_nosmp_defconfig : passed 1:31.73 jetsontk1 arm-tegra_defconfig : passed 0:48.96 jetsontk1 arm-multi_v7_defconfig : passed 0:44.69 jetsontk1 arm-multi_lpae_defconfig : passed 0:52.17 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:02.66 omap5uevm arm-omap2plus_defconfig : passed 1:07.29 pi arm-exynos_defconfig : passed 3:12.58 pi arm-multi_v7_defconfig : passed 3:17.81 pi arm-multi_lpae_defconfig : passed 3:12.08 pi arm-multi_v7_nosmp_defconfig : warnings 3:14.49 pit arm-multi_v7_defconfig : passed 3:10.01 pit arm-multi_lpae_defconfig : passed 3:18.37 pit arm-multi_v7_nosmp_defconfig : warnings 3:06.58 seaboard arm-tegra_defconfig : passed 3:24.89 seaboard arm-multi_v7_defconfig : passed 3:41.00 seaboard arm-multi_v7_nosmp_defconfig : warnings 3:23.34 seattle arm64-defconfig : warnings 2:19.26 snow arm-exynos_defconfig : passed 3:20.73 snow arm-multi_v7_defconfig : passed 2:04.66 snow arm-multi_lpae_defconfig : passed 1:58.95 snow arm-multi_v7_nosmp_defconfig : warnings 2:03.05 snowball arm-multi_v7_defconfig : warnings 3:31.43 snowball arm-multi_v7_nosmp_defconfig : warnings 1:52.87 trimslice arm-tegra_defconfig : passed 3:16.39 trimslice arm-multi_v7_defconfig : passed 3:31.30 trimslice arm-multi_v7_nosmp_defconfig : warnings 3:28.95 wandboard arm-imx_v6_v7_defconfig : passed 1:26.40
Offline boards:
bbb arm-multi_v7_defconfig : OFFLINE 1:34.59 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.36 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:21.41 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:25.31 dalmore arm-tegra_defconfig : OFFLINE 2:17.82 dalmore arm-multi_v7_defconfig : OFFLINE 2:20.97 dalmore arm-multi_lpae_defconfig : OFFLINE 2:22.41 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.98 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:15.96 hummingboard arm-multi_v7_defconfig : OFFLINE 2:26.19 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.69 parallella arm-multi_v7_defconfig : OFFLINE 2:21.61 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.84 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:46.43 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.13 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:57.61 sama5 arm-sama5_defconfig : OFFLINE 2:15.15 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:29.98 socfpga arm-socfpga_defconfig : OFFLINE 2:17.10 socfpga arm-multi_v7_defconfig : OFFLINE 2:23.78 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.19
Board legend is available at http://arm-soc.lixom.net/boards.html
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.298086] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.305041] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.311558] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.318518] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.324100] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.331136] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09ef000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.341127] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.352757] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.359374] [drm] No driver support for vblank timestamp query. [ 3.365307] drm drm: No connectors reported connected with modes [ 3.371312] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.396832] Console: switching to colour frame buffer device 128x48 [ 3.408795] drm drm: fb0: frame buffer device [ 3.423658] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.434411] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.440877] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.446286] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.454114] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.473676] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.480741] hub 1-0:1.0: USB hub found [ 3.484510] hub 1-0:1.0: 1 port detected [ 3.489478] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.494888] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.502626] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.523971] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.530950] hub 2-0:1.0: USB hub found [ 3.534721] hub 2-0:1.0: 1 port detected [ 3.544399] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.558065] vdd_sata,avdd_plle: disabling [ 3.562781] usb1_vbus: disabling [ 3.566844] Waiting for root device /dev/mmcblk0p1... [ 3.868667] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.474341] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:44]: got exception: timeout ~$off
[PYBOOT] [beaver 01:45]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 4.942785] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 4.949740] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 4.956256] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 4.963206] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.968786] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 5.088594] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09ef000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 5.098586] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.128941] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.135556] [drm] No driver support for vblank timestamp query. [ 5.141491] drm drm: No connectors reported connected with modes [ 5.147493] [drm] Cannot find any crtc or sizes - going 1024x768 [ 5.199073] Console: switching to colour frame buffer device 128x48 [ 5.228137] drm drm: fb0: frame buffer device [ 5.232571] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.242695] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 5.249160] tegra-ehci 7d004000.usb: EHCI Host Controller [ 5.254568] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 5.298238] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 5.318141] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 5.333223] hub 1-0:1.0: USB hub found [ 5.336978] hub 1-0:1.0: 1 port detected [ 5.348985] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.354396] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 5.373221] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 5.393141] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 5.408209] hub 2-0:1.0: USB hub found [ 5.411959] hub 2-0:1.0: 1 port detected [ 5.426688] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 5.439867] vdd_sata,avdd_plle: disabling [ 5.463152] usb1_vbus: disabling [ 5.467076] Waiting for root device /dev/mmcblk0p1... [ 5.753145] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.218670] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:54]: got exception: timeout ~$off
[PYBOOT] [beaver 01:56]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 7.044163] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 7.051221] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.056820] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.064316] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.074310] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.087843] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.094478] [drm] No driver support for vblank timestamp query. [ 7.100424] drm drm: No connectors reported connected with modes [ 7.106434] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.133302] Console: switching to colour frame buffer device 128x48 [ 7.145111] drm drm: fb0: frame buffer device [ 7.181000] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.190132] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.196625] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.202055] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.210008] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.241007] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.248874] hub 1-0:1.0: USB hub found [ 7.252672] hub 1-0:1.0: 1 port detected [ 7.257408] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.262830] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.270737] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.300996] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.308675] hub 2-0:1.0: USB hub found [ 7.312461] hub 2-0:1.0: 1 port detected [ 7.322018] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.339948] vdd_sata,avdd_plle: disabling [ 7.344717] usb1_vbus: disabling [ 7.348105] ALSA device list: [ 7.351111] #0: NVIDIA Tegra Beaver [ 7.355259] Waiting for root device /dev/mmcblk0p1... [ 7.671001] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.347660] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:40]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:41]: got exception: timeout ~$off
[PYBOOT] [beaver 01:43]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------
Sorting __ex_table... Memory: 4023488K/4194304K available (10084K kernel code, 1760K rwdata, 3476K rodata, 4236K init, 1059K bss, 170816K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs span: 0-1 (max cpu_capacity = 1024) devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 12992 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver cpuidle: using governor menu kworker/u4:0 (39) used greatest stack d [PYBOOT] [chitra 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [chitra 01:54]: got exception: timeout ~$off
[PYBOOT] [chitra 01:56]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
INIT: version 2.88 booting [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [ 16.815984] random: fast init done [....] Starting the hotplug events dispatcher: udevd[ 20.917759] udevd[181]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 63.797526] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 63.824524] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 144.983331] eth0: device MAC address 66:78:25:aa:8c:59 [ 145.030322] RX IPC Checksum Offload disabled [ 145.034942] No MAC Management Counters available [ 145.040716] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/66:78:25:aa:8c:59 Sending on LPF/eth0/66:78:25:aa:8c:59 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
[PYBOOT] [colombus 03:22]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:23]: got exception: timeout ~$off
[PYBOOT] [colombus 03:25]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.804063] of_clk_max77686_get: invalid index 0 [ 1.808329] ERROR: could not get clock /rtc@10070000:rtc_src(1) [ 1.814231] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.823944] s3c-rtc 10070000.rtc: failed to find rtc source clock [ 1.830015] mmc1: new DDR MMC card at address 0001 [ 1.835002] s3c-rtc: probe of 10070000.rtc failed with error -2 [ 1.840760] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.845333] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.851783] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.857130] exynos-bus: new bus device registered: bus_dmc (100000 KHz ~ 400000 KHz) [ 1.857660] exynos-bus: new bus device registered: bus_acp (100000 KHz ~ 267000 KHz) [ 1.857978] exynos-bus: new bus device registered: bus_c2c (100000 KHz ~ 400000 KHz) [ 1.864838] exynos-bus: new bus device registered: bus_leftbus (100000 KHz ~ 200000 KHz) [ 1.865159] exynos-bus: new bus device registered: bus_rightbus (100000 KHz ~ 200000 KHz) [ 1.865586] exynos-bus: new bus device registered: bus_display (160000 KHz ~ 200000 KHz) [ 1.866002] exynos-bus: new bus device registered: bus_fsys (100000 KHz ~ 134000 KHz) [ 1.866421] exynos-bus: new bus device registered: bus_peri ( 50000 KHz ~ 100000 KHz) [ 1.866753] exynos-bus: new bus device registered: bus_mfc (100000 KHz ~ 200000 KHz) [ 1.912224] max98090 1-0010: MAX98090 REVID=0x43 [ 1.913765] devfreq bus_dmc: Couldn't update frequency transition information. [ 1.921571] devfreq bus_leftbus: Couldn't update frequency transition information. [ 1.947098] max98090 1-0010: use default 2.8v micbias [ 1.952803] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.959765] mmcblk1: p1 p2 [ 1.968823] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.974080] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.010534] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.033237] VDD10_HDMI_1.0V: disabling [ 2.034991] vdd_g3d: disabling [ 2.036213] BUCK8_P3V3: disabling [ 2.041069] ALSA device list: [ 2.041145] #0: Odroid-U3 [ 2.045332] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.871089] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.886469] SMPS6: supplied by vsys_cobra [ 1.890993] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.897632] random: fast init done [ 1.902337] SMPS7: supplied by vsys_cobra [ 1.907259] vdds_1v8_main: supplied by smps7 [ 1.912626] SMPS8: supplied by vsys_cobra [ 1.928750] SMPS9: supplied by vsys_cobra [ 1.942573] smps9: Bringing 0uV into 2100000-2100000uV [ 1.959985] LDO1: supplied by vsys_cobra [ 1.972562] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.987939] ldo1: ramp_delay not set [ 1.992222] LDO2: supplied by vsys_cobra [ 2.007569] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.022937] ldo2: ramp_delay not set [ 2.027221] LDO3: supplied by vdds_1v8_main [ 2.043862] LDO4: supplied by vdds_1v8_main [ 2.057569] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.072938] ldo4: ramp_delay not set [ 2.077214] LDO5: supplied by vsys_cobra [ 2.093864] LDO6: supplied by vdds_1v8_main [ 2.110373] LDO7: supplied by vsys_cobra [ 2.122569] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.137935] ldo7: ramp_delay not set [ 2.142226] LDO8: supplied by vsys_cobra [ 2.158875] LDO9: supplied by vmmcsd_fixed [ 2.174015] LDOLN: supplied by vsys_cobra [ 2.188872] LDOUSB: supplied by vsys_cobra [ 2.206213] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.222716] 4-0022 supply vcc not found, using dummy regulator [ 2.243111] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.258641] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.266518] cpufreq: cpufreq_online: CPU0: Unliste[ 2.271235] Unable to handle kernel paging request at virtual address 00021284 [ [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.886525] SMPS6: supplied by vsys_cobra [ 1.891036] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.897379] random: fast init done [ 1.902348] SMPS7: supplied by vsys_cobra [ 1.907259] vdds_1v8_main: supplied by smps7 [ 1.912631] SMPS8: supplied by vsys_cobra [ 1.928705] SMPS9: supplied by vsys_cobra [ 1.942524] smps9: Bringing 0uV into 2100000-2100000uV [ 1.959949] LDO1: supplied by vsys_cobra [ 1.972519] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.987897] ldo1: ramp_delay not set [ 1.992176] LDO2: supplied by vsys_cobra [ 2.007526] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.022896] ldo2: ramp_delay not set [ 2.027184] LDO3: supplied by vdds_1v8_main [ 2.043821] LDO4: supplied by vdds_1v8_main [ 2.057525] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.072894] ldo4: ramp_delay not set [ 2.077172] LDO5: supplied by vsys_cobra [ 2.093818] LDO6: supplied by vdds_1v8_main [ 2.110317] LDO7: supplied by vsys_cobra [ 2.122524] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.137896] ldo7: ramp_delay not set [ 2.142192] LDO8: supplied by vsys_cobra [ 2.158835] LDO9: supplied by vmmcsd_fixed [ 2.173971] LDOLN: supplied by vsys_cobra [ 2.188834] LDOUSB: supplied by vsys_cobra [ 2.206151] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.222674] 4-0022 supply vcc not found, using dummy regulator [ 2.243066] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.258602] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.266488] Unable to h[ 2.268758] Unable to handle kernel paging request at virtual address 00021284 [ 2.268760] pgd = c0204000 [ 2.2 [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 26.846288] 3ec0: c0315678 0000000b 00000000 c030b798 ee682218 0000000b 00000000 00000008 [ 26.854811] 3ee0: ee682000 00000000 65000000 35333935 20633030 30613165 30303038 31336520 [ 26.863337] 3f00: 38303032 31652030 30373061 28203130 35393565 63323136 c0002029 ee683f3c [ 26.871861] 3f20: 00000000 0420818c ee684040 00000005 00000000 0420818c ee684000 30202054 [ 26.880378] 3f40: 00000014 c031a748 00000005 c03159b0 ee660f40 ee666e00 c034b0b8 00000000 [ 26.888910] 3f60: 00000000 00000000 00000000 c034fe9c 22042855 00000000 ee660f40 c1107ac4 [ 26.897430] 3f80: 00000005 c0315a5c 0420818c ee684040 ee684000 30202054 00000014 c0301298 [ 26.905960] 3fa0: c034fdc8 00000000 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 26.914485] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 26.923012] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 40100501 525c6491 [ 26.931542] [<c0356eec>] (account_system_time) from [<c036f970>] (update_process_times+0x28/0x60) [ 26.940797] [<c036f970>] (update_process_times) from [<c037e84c>] (tick_sched_timer+0x5c/0xb0) [ 26.949772] [<c037e84c>] (tick_sched_timer) from [<c0370494>] (__hrtimer_run_queues.constprop.4+0x104/0x184) [ 26.960024] [<c0370494>] (__hrtimer_run_queues.constprop.4) from [<c03706a8>] (hrtimer_interrupt+0x88/0x1ac) [ 26.970270] [<c03706a8>] (hrtimer_interrupt) from [<c09e0010>] (arch_timer_handler_virt+0x28/0x30) [ 26.979608] [<c09e0010>] (arch_timer_handler_virt) from [<c0368350>] (handle_percpu_devid_irq+0x64/0xfc) [ 26.989489] [<c0368350>] (handle_percpu_devid_irq) from [<c03645d8>] (generic_handle_irq+0x24/0x34) [ 26.998922] [<c03645d8>] (generic_handle_irq) from [<c0364a6c>] (__handle_domain_irq+0x54/0xa8) [ 27.007984] [<c0364a6c>] (__handle_domain_irq) from [<c03016e0>] (gic_handle_irq+0x54/0x88) [ 27.016693] [<c03016e0>] (gic_handle_irq) from [<c030becc>] (__irq_svc+0x6c/0x90) [ 27.024489] Exception stack(0xee683e28 to 0xee683e70) [ 27.029751] 3e20: ee684000 00000000 c1107ac4 c1107ac4 ee684000 c1107ac4 [ 27.038273] 3e40: ee68433c c0e740a4 00000000 c0315678 c0315676 00000000 00000000 ee683e78 [ 27.046796] 3e60: c0335558 c0381a08 20000153 ffffffff [ 27.052057] [<c030becc>] (__irq_svc) from [<c0381a08>] (exit_pi_state_list+0x44/0xcc) [ 27.060222] [<c0381a08>] (exit_pi_state_list) from [<c0335558>] (mm_release+0xe8/0x108) [ 27.068562] [<c0335558>] (mm_release) from [<c0338b40>] (do_exit+0xf8/0x90c) [ 27.075901] [<c0338b40>] (do_exit) from [<c030b798>] (die+0x328/0x394) [ 27.082704] [<c030b798>] (die) from [<c031a748>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 27.090952] [<c031a748>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 27.100203] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 27.108179] Code: e1a04002 e3a05000 f5d3f000 e1b30f9f (e0900004) [ 27.114525] ---[ end trace b7d32c7110c34cfd ]--- [ 27.119333] Kernel panic - not syncing: Fatal exception in interrupt [ 27.125957] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 01:34]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:35]: Done. Board pandaes-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.982421] twl: not initialized [ 1.985778] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 1.994140] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.002502] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.010833] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.019195] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.027526] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 2.035858] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 2.044464] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.051727] omap2_set_init_voltage: unable to set vdd_core [ 2.057434] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 2.064605] omap2_set_init_voltage: unable to set vdd_iva [ 2.070312] Power Management for TI OMAP4+ devices. [ 2.075408] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.082458] ThumbEE CPU extension supported. [ 2.087188] Registering SWP/SWPB emulation handler [ 2.095489] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.118377] twl 0-0048: PIH (irq 339) nested IRQs [ 2.124664] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 2.132080] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 2.140441] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 2.160736] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.168975] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.175506] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.182128] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.356475] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.374694] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.384399] VDAC: disabling [ 2.387756] VANA: disabling [ 2.390899] random: fast init done [ 2.394683] VUSB: disabling [ 2.398345] Waiting for root device /dev/mmcblk0p2... [ 2.417694] mmc1: new SDIO card at address 0001
[PYBOOT] [pandaes 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:06]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:07]: Done. Board pandaes-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.319030] Key type dns_resolver registered [ 3.323638] twl: not initialized [ 3.327026] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.335357] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.343688] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.352050] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.360382] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.368713] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660 [ 3.377075] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660 [ 3.385650] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.392883] omap2_set_init_voltage: unable to set vdd_core [ 3.398620] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 3.405761] omap2_set_init_voltage: unable to set vdd_iva [ 3.411468] Power Management for TI OMAP4+ devices. [ 3.416564] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 3.423736] ThumbEE CPU extension supported. [ 3.586883] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 3.602508] twl 0-0048: PIH (irq 339) nested IRQs [ 3.616149] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected. [ 3.629302] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC [ 3.651275] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0 [ 3.677307] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 3.744964] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 3.751586] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 3.757873] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 3.976684] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.993408] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 4.014434] random: fast init done [ 4.019927] VDAC: disabling [ 4.023223] VANA: disabling [ 4.026519] VUSB: disabling [ 4.033660] Waiting for root device /dev/mmcblk0p2... [ 4.046020] mmc1: new SDIO card at address 0001
[PYBOOT] [pandaes 02:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:18]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:19]: Done. Board pandaes-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.612762] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 4.620361] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 4.628601] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 4.628601] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.641571] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.648437] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.658020] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.667510] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.674560] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.680725] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.680725] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.693878] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.703460] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.712951] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.720001] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.794738] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 4.801788] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 4.801788] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 4.818206] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 4.820404] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 4.834747] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 5.000549] hctosys: unable to open rtc device (rtc0) [ 5.006408] sr_init: No PMIC hook to init smartreflex [ 5.012084] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 5.020202] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 5.028808] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 5.079467] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 5.107025] VDAC: disabling [ 5.110809] VANA: disabling [ 5.114562] VUSB: disabling [ 5.122100] random: fast init done [ 5.127868] Waiting for root device /dev/mmcblk0p2... [ 5.143798] mmc1: new SDIO card at address 0001
[PYBOOT] [pandaes 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:16]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:17]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 81.125114] snow-audio sound: snd_soc_register_card failed (-517) [ 81.135580] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.145114] snow-audio sound: snd_soc_register_card failed (-517) [ 81.155579] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.165115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.175575] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.185115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.195579] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.205115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.215575] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.225115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.235579] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.245114] snow-audio sound: snd_soc_register_card failed (-517) [ 81.255578] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.265115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.275580] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.285114] snow-audio sound: snd_soc_register_card failed (-517) [ 81.295588] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.305115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.315586] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.325115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.335594] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.345115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.355587] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.365115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.375590] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.385114] snow-audio sound: snd_soc_register_card failed (-517) [ 81.395588] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.405115] snow-audio sound: snd_soc_register_card failed (-517) [ 81.415596] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.425114] snow-audio sound: snd_soc_register_card failed (-517) [ 81.435601] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.445114] snow-audio sound: snd_soc_register_card failed (-517) [ 81.455599] snow-audio sound: ASoC: CPU DAI (null) not registered [ 81.465114] snow-audio sound: snd_soc_register_card failed (-517)
[PYBOOT] [pit 01:45]: got exception: timeout ~$off
[PYBOOT] [pit 01:46]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...[ 10.981719] smsc911x 50000000.ethernet eth0: MAC Address: 08:00:08:1e:0f:44 Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 11.220306] SMSC LAN8700 50000000.etherne:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=50000000.etherne:01, irq=-1) [ 11.260101] smsc911x 50000000.ethernet eth0: SMSC911x/921x identified at 0xf09f0000, IRQ: 219 [ 11.268707] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 [ 14.340393] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPOFFER from 172.16.20.1 DHCPACK from 172.16.20.1 /sbin/dhclient-script: line 49: echo: write error: No space left on device bound to 172.16.20.108 -- renewal in 42301 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [ 20.141052] EXT4-fs error: 15 callbacks suppressed [ 20.145874] EXT4-fs error (device mmcblk3p4): ext4_lookup:1609: inode #2915: comm bootlogs: deleted inode referenced: 11957 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 03:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:11]: got exception: timeout ~$off
[PYBOOT] [snowball 03:12]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.762601] [<c0bc2eec>] (schedule) from [<c0344cf8>] (do_exit+0x6d4/0xa74) [ 1.762610] [<c0344cf8>] (do_exit) from [<c030bd98>] (die+0x410/0x474) [ 1.762624] [<c030bd98>] (die) from [<c031ce30>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 1.762639] [<c031ce30>] (__do_kernel_fault.part.0) from [<c0317e60>] (do_page_fault+0x36c/0x380) [ 1.762648] [<c0317e60>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 1.762659] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 1.762662] Exception stack(0xee765e48 to 0xee765e90) [ 1.762669] 5e40: 00000040 000001e4 6e1e3240 0000004c 00000040 00000000 [ 1.762676] 5e60: 00000040 00000000 c13098d8 00000000 eefcc900 ee6b6100 10624dd3 ee765e98 [ 1.762680] 5e80: c06ad5e4 c0bc478c 60000013 ffffffff [ 1.762690] [<c030c478>] (__dabt_svc) from [<c0bc478c>] (mutex_lock+0xc/0x4c) [ 1.762700] [<c0bc478c>] (mutex_lock) from [<c06ad5e4>] (regulator_disable+0x2c/0x60) [ 1.762711] [<c06ad5e4>] (regulator_disable) from [<c0323d3c>] (imx6q_pm_pu_power_off+0x8c/0x94) [ 1.762722] [<c0323d3c>] (imx6q_pm_pu_power_off) from [<c07ba5bc>] (genpd_power_off+0x3c/0xa4) [ 1.762732] [<c07ba5bc>] (genpd_power_off) from [<c07bc0e4>] (genpd_poweroff+0xfc/0x178) [ 1.762740] [<c07bc0e4>] (genpd_poweroff) from [<c07bc4dc>] (genpd_power_off_work_fn+0x20/0x2c) [ 1.762750] [<c07bc4dc>] (genpd_power_off_work_fn) from [<c0357cc4>] (process_one_work+0x1ec/0x414) [ 1.762758] [<c0357cc4>] (process_one_work) from [<c0358970>] (worker_thread+0x38/0x594) [ 1.762767] [<c0358970>] (worker_thread) from [<c035d908>] (kthread+0xdc/0xf4) [ 1.762777] [<c035d908>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 1.762785] Code: ebff8549 e1a00006 e8bd81f0 e59032f8 (e5130014) [ 1.762788] ---[ end trace 2b4a8a3234534332 ]--- [ 1.762791] Fixing recursive fault but reboot is needed! [ 1.856247] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.875634] mmc2: new high speed SDHC card at address 0001 [ 3.193984] random: fast init done [ 22.753979] INFO: rcu_sched detected stalls on CPUs/tasks: [ 22.759490] 3-...: (2 ticks this GP) idle=af9/140000000000000/0 softirq=33/33 fqs=2089 [ 22.767579] (detected by 0, t=4202 jiffies, g=-279, c=-280, q=9) [ 22.773692] Task dump for CPU 3: [ 22.776924] kworker/3:1 D c0bc2b04 0 98 0 0x00000002 [ 22.783328] [<c0bc2b04>] (__schedule) from [<c1302100>] (0xc1302100) [ 68.809019] random: crng init done
[PYBOOT] [wandboard 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:44]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:45]: Done. Board wandboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 110.590947] task: ee03c088 task.stack: ee03c08c [ 110.595479] PC is at account_system_time+0x64/0x1c0 [ 110.600356] LR is at 0x4 [ 110.602890] pc : [<c0356e90>] lr : [<00000004>] psr: 200001d3 [ 110.602890] sp : ee5b7d0c ip : 00000000 fp : 00000001 [ 110.614365] r10: 00000000 r9 : c11370c0 r8 : c11370cc [ 110.619589] r7 : 00000019 r6 : ffffffff r5 : ee03c088 r4 : ffffe000 [ 110.626115] r3 : 00000000 r2 : 00000001 r1 : ffffffff r0 : ee03c088 [ 110.632643] Flags: nzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 110.639950] Control: 10c53c7d Table: 10204059 DAC: 00000051 [ 110.645695] Process #size-cells (pid: -1, stack limit = 0xee03c2a4) [ 110.651960] Stack: (0xee5b7d0c to 0xee03e08c) [ 110.656322] [<c0356e90>] (account_system_time) from [<c036f970>] (update_process_times+0x28/0x60) [ 110.665198] [<c036f970>] (update_process_times) from [<c037e84c>] (tick_sched_timer+0x5c/0xb0) [ 110.673814] [<c037e84c>] (tick_sched_timer) from [<c0370494>] (__hrtimer_run_queues.constprop.4+0x104/0x184) [ 110.683644] [<c0370494>] (__hrtimer_run_queues.constprop.4) from [<c03706a8>] (hrtimer_interrupt+0x88/0x1ac) [ 110.693473] [<c03706a8>] (hrtimer_interrupt) from [<c030de6c>] (twd_handler+0x30/0x38) [ 110.701393] [<c030de6c>] (twd_handler) from [<c0368350>] (handle_percpu_devid_irq+0x64/0xfc) [ 110.709834] [<c0368350>] (handle_percpu_devid_irq) from [<c03645d8>] (generic_handle_irq+0x24/0x34) [ 110.718880] [<c03645d8>] (generic_handle_irq) from [<c0364a6c>] (__handle_domain_irq+0x54/0xa8) [ 110.727580] [<c0364a6c>] (__handle_domain_irq) from [<c03016e0>] (gic_handle_irq+0x54/0x88) [ 110.735932] [<c03016e0>] (gic_handle_irq) from [<c030becc>] (__irq_svc+0x6c/0x90) [ 110.743413] Exception stack(0xee5b7e28 to 0xee5b7e70) [ 110.748465] 7e20: 00000041 00000000 c1133930 c1133930 c121c368 00000000 [ 110.756644] 7e40: 600001d3 00000000 00000001 c0315574 c0315572 00000000 600001d3 ee5b7e78 [ 110.764820] 7e60: c03a1420 c03a1424 60000153 ffffffff [ 110.769875] [<c030becc>] (__irq_svc) from [<c03a1424>] (panic+0x1f0/0x250) [ 110.776755] [<c03a1424>] (panic) from [<c030b7b0>] (die+0x340/0x394) [ 110.783112] [<c030b7b0>] (die) from [<c031a748>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 110.791031] [<c031a748>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 110.799903] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 110.807561] Code: e08cc002 e580c210 e0813003 e5803218 (e5d630d0) [ 110.813655] ---[ end trace b1330cd8ba9c2305 ]--- [ 110.818272] Kernel panic - not syncing: Fatal exception in interrupt [ 110.824625] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [wandboard 02:16]: got exception: panic ~$off
[PYBOOT] [wandboard 02:17]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter