Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20150424/

Failed boards:

apc arm-vt8500_v6_v7_defconfig : BUILD FAILED colombus arm-sunxi_defconfig : BUILD FAILED cubie arm-sunxi_defconfig : BUILD FAILED cubie2 arm-sunxi_defconfig : BUILD FAILED minnowmax x86-minnowmax_defconfig : FAILED 0:53.99 pi arm-exynos_defconfig : FAILED 0:30.17 pit arm-exynos_defconfig : FAILED 0:33.13 seaboard arm-tegra_defconfig : FAILED 1:51.72 seaboard arm-multi_v7_defconfig : FAILED 1:57.70 snowball arm-u8500_defconfig : FAILED 3:12.69 socfpga arm-multi_v7_defconfig : FAILED 3:17.01

Successful boards:

arndale arm-exynos_defconfig : passed 1:27.30 bbb arm-omap2plus_defconfig : passed 1:45.92 bbb arm-multi_v7_defconfig : passed 1:14.25 beaver arm-tegra_defconfig : passed 1:05.22 beaver arm-multi_v7_defconfig : passed 1:09.69 capri arm-bcm_defconfig : passed 0:41.17 capri arm-multi_v7_defconfig : passed 0:42.99 chitra powerpc-pasemi_defconfig : passed 1:17.18 chitra powerpc-ppc64_defconfig : passed 1:04.68 colombus arm-multi_v7_defconfig : passed 1:11.30 colombus arm-multi_lpae_defconfig : passed 1:16.37 cosmic arm-imx_v6_v7_defconfig : passed 2:05.76 cosmic arm-multi_v7_defconfig : passed 1:26.22 cubie arm-multi_v7_defconfig : passed 1:06.35 cubie2 arm-multi_v7_defconfig : passed 1:07.84 cubie2 arm-multi_lpae_defconfig : passed 1:11.07 cubox arm-multi_v7_defconfig : passed 1:20.80 cubox arm-mvebu_v7_defconfig : passed 1:21.69 dalmore arm-tegra_defconfig : passed 1:32.85 dalmore arm-multi_v7_defconfig : passed 1:24.74 dalmore arm-multi_lpae_defconfig : passed 1:29.78 hummingboard arm-imx_v6_v7_defconfig : passed 1:26.13 hummingboard arm-multi_v7_defconfig : passed 1:15.30 jetsontk1 arm-tegra_defconfig : passed 0:55.90 jetsontk1 arm-multi_v7_defconfig : passed 2:11.12 jetsontk1 arm-multi_lpae_defconfig : passed 0:56.50 odroidu3 arm-exynos_defconfig : passed 0:57.74 omap5uevm arm-omap2plus_defconfig : passed 1:06.49 omap5uevm arm-multi_v7_defconfig : passed 1:08.60 omap5uevm arm-multi_lpae_defconfig : passed 1:18.47 pandaes arm-omap2plus_defconfig : warnings 1:33.72 pandaes arm-multi_v7_defconfig : passed 1:42.07 pi arm-multi_v7_defconfig : passed 1:03.05 pi arm-multi_lpae_defconfig : passed 1:02.73 pit arm-multi_v7_defconfig : passed 0:50.60 pit arm-multi_lpae_defconfig : passed 0:55.54 rk3288evb arm-multi_v7_defconfig : passed 0:57.18 rk3288evb arm-multi_lpae_defconfig : passed 0:47.68 sama5 arm-sama5_defconfig : passed 1:21.90 snowball arm-multi_v7_defconfig : passed 1:26.33 socfpga arm-socfpga_defconfig : passed 1:23.74 trimslice arm-tegra_defconfig : passed 1:31.60 trimslice arm-multi_v7_defconfig : passed 0:58.21 wandboard arm-imx_v6_v7_defconfig : passed 1:15.67 wandboard arm-multi_v7_defconfig : passed 1:00.84

Offline boards:

arndale arm-multi_v7_defconfig : OFFLINE 1:09.31 arndale arm-multi_lpae_defconfig : OFFLINE 1:17.73 parallella arm-multi_v7_defconfig : OFFLINE 1:26.19 snow arm-exynos_defconfig : OFFLINE 1:42.94 snow arm-multi_v7_defconfig : OFFLINE 1:44.60 snow arm-multi_lpae_defconfig : OFFLINE 1:45.40

Board legend is available at http://arm-soc.lixom.net/boards.html

Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------

Connected to minnowmax console [channel connected] (~$quit to exit) ~$open

~$hardreset

Command(minnowmax console)> open console already open

Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on

[PYBOOT] [minnowmax 00:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [minnowmax 00:52]: got exception: timeout ~$off

[PYBOOT] [minnowmax 00:53]: Done. Board pi-arm-exynos_defconfig failure log: -------------------------------------------------

[ 3.565875] exynos-dp 145b0000.dp-controller: Link Training success! [ 3.620995] Console: switching to colour frame buffer device 274x77 [ 3.729911] exynos-drm exynos-drm: fb0: frame buffer device [ 3.735549] exynos-drm exynos-drm: registered panic notifier [ 3.753073] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.758008] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.765736] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.792078] TPS65090_RAILSLDO2: disabling [ 3.794654] TPS65090_RAILSLDO1: disabling [ 3.798620] TPS65090_RAILSDCDC3: disabling [ 3.802715] vdd_1v2_2: disabling [ 3.806530] ALSA device list: [ 3.808853] No soundcard[ 3.813585] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.821754] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.834245] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.840987] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.849961] devtmpfs: mounted [ 3.851643] Freeing unused kernel memory: 35 [PYBOOT] [pi 00:27]: kernel: finished booting, starting userspace. 2K (c0734000 - c078c000) [ 3.861857] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.867420] pgd = ed330000 [ 3.870109] [00000000] *pgd=6d2ff831, *pte=00000000, *ppte=00000000 [ 3.883120] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.883120] [ 3.890767] CPU: 0 PID: 1 Comm: init Not tainted 4.0.0-next-20150424 #1 [ 3.897357] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.903448] [<c00153ec>] (unwind_backtrace) from [<c001231c>] (show_stack+0x10/0x14) [ 3.911161] [<c001231c>] (show_stack) from [<c0524750>] (dump_stack+0x84/0xc4) [ 3.918355] [<c0524750>] (dump_stack) from [<c0522d54>] (panic+0x9c/0x200) [ 3.925209] [<c0522d54>] (panic) from [<c00242e8>] (complete_and_exit+0x0/0x1c) [ 3.932493] [<c00242e8>] (complete_and_exit) from [<00000000>] ( (null)) [ 3.939259] drm_kms_helper: panic occurred, switching back to text console [ 3.946137] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.946137]

[PYBOOT] [pi 00:28]: got exception: panic ~$off

[PYBOOT] [pi 00:29]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------

[ 4.009573] exynos-dp 145b0000.dp-controller: Link Training success! [ 4.027708] Console: switching to colour frame buffer device 195x54 [ 4.094312] exynos-drm exynos-drm: fb0: frame buffer device [ 4.099950] exynos-drm exynos-drm: registered panic notifier [ 4.118108] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 4.123042] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 4.130764] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 4.156183] TPS65090_RAILSLDO2: disabling [ 4.158756] TPS65090_RAILSLDO1: disabling [ 4.162706] TPS65090_RAILSDCDC3: disabling [ 4.166841] vdd_1v2_2: disabling [ 4.170622] ALSA device list: [ 4.172938] No soundcardã[ 4.177706] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 4.185985] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 4.198705] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.205442] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 4.214348] devtmpfs: mounted [ 4.216036] Freeing unused kernel memory: 352K (c0734000 - c078c000)

[PYBOOT] [pit 00:30]: kernel: finished booting, starting userspace. [ 4.225197] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 4.230754] pgd = ed324000 [ 4.233443] [00000000] *pgd=6d303831, *pte=00000000, *ppte=00000000 [ 4.248155] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 4.248155] [ 4.255801] CPU: 0 PID: 1 Comm: init Not tainted 4.0.0-next-20150424 #1 [ 4.262391] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 4.268483] [<c00153ec>] (unwind_backtrace) from [<c001231c>] (show_stack+0x10/0x14) [ 4.276195] [<c001231c>] (show_stack) from [<c0524750>] (dump_stack+0x84/0xc4) [ 4.283389] [<c0524750>] (dump_stack) from [<c0522d54>] (panic+0x9c/0x200) [ 4.290243] [<c0522d54>] (panic) from [<c00242e8>] (complete_and_exit+0x0/0x1c) [ 4.297528] [<c00242e8>] (complete_and_exit) from [<00000000>] ( (null)) [ 4.304294] drm_kms_helper: panic occurred, switching back to text console [ 4.311171] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 4.311171]

[PYBOOT] [pit 00:31]: got exception: panic ~$off

[PYBOOT] [pit 00:32]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.767194] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.780989] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.789431] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.802479] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.824580] input: NVIDIA Tegra Seaboard Headphone Jack as /devices/soc0/sound/sound/card0/input2 [ 1.833876] input: NVIDIA Tegra Seaboard Mic Jack as /devices/soc0/sound/sound/card0/input3 [ 1.843624] NET: Registered protocol family 17 [ 1.848107] can: controller area network core (rev 20120528 abi 9) [ 1.854380] NET: Registered protocol family 29 [ 1.858847] can: raw protocol (rev 20120528) [ 1.863140] can: broadcast manager protocol (rev 20120528 t) [ 1.868821] can: netlink gateway (rev 20130117) max_hops=1 [ 1.874779] Key type dns_resolver registered [ 1.879448] ThumbEE CPU extension supported. [ 1.883756] Registering SWP/SWPB emulation handler [ 1.890947] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.895300] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.896585] 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.901371] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.901399] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.901430] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.901750] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.912767] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.913652] hub 3-0:1.0: USB hub found [ 1.913695] hub 3-0:1.0: 1 port detected [ 1.917979] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.917982] [drm] No driver support for vblank timestamp query. [ 1.968123] mmc0: new SDIO card at address 0001 [ 2.021059] Console: switching to colour frame buffer device 170x48 [ 2.049766] drm drm: fb0: frame buffer device [ 2.054221] drm drm: registered panic notifier [ 2.072768] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.079740] input: gpio-keys as /devices/soc0/gpio-keys/input/input4

[PYBOOT] [seaboard 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:56]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:57]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.651550] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.667557] input: NVIDIA Tegra Seaboard Headphone Jack as /devices/soc0/sound/sound/card0/input2 [ 1.678630] input: NVIDIA Tegra Seaboard Mic Jack as /devices/soc0/sound/sound/card0/input3 [ 1.691230] NET: Registered protocol family 10 [ 1.698973] mip6: Mobile IPv6 [ 1.701951] sit: IPv6 over IPv4 tunneling driver [ 1.710707] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.713578] NET: Registered protocol family 17 [ 1.713670] NET: Registered protocol family 15 [ 1.713683] can: controller area network core (rev 20120528 abi 9) [ 1.716501] NET: Registered protocol family 29 [ 1.716522] can: raw protocol (rev 20120528) [ 1.716538] can: broadcast manager protocol (rev 20120528 t) [ 1.716583] can: netlink gateway (rev 20130117) max_hops=1 [ 1.751326] Bluetooth: RFCOMM socket layer initialized [ 1.756526] Bluetooth: RFCOMM ver 1.11 [ 1.757992] mmc0: new SDIO card at address 0001 [ 1.765001] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.770345] Bluetooth: BNEP socket layer initialized [ 1.775344] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.781292] Bluetooth: HIDP socket layer initialized [ 1.788061] Registering SWP/SWPB emulation handler [ 1.805217] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.812011] 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.823366] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.829836] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.835332] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.843515] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.862158] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.871771] hub 3-0:1.0: USB hub found [ 1.875674] hub 3-0:1.0: 1 port detected [ 1.890072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.896769] [drm] No driver support for vblank timestamp query.

[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:51]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.763488] Freeing unused kernel memory: [PYBOOT] [snowball 00:38]: kernel: finished booting, starting userspace. 200K (c061a000 - c064c000) INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 3.600372] udevd[1074]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[ 4.180999] cfg80211: Calling CRDA to update world regulatory domain [ 4.958282] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 4.964843] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 4.974853] mmc2: tried to reset card [ 4.978485] mmcblk0rpmb: retrying using single block read [ 5.329681] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 5.336486] mmcblk0rpmb: error -110 transferring data, sector 24, nr 8, cmd response 0x900, card status 0x0 [ 5.346405] mmc2: tried to reset card [ 5.350097] mmcblk0rpmb: retrying using single block read [ 5.692718] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 5.699493] mmcblk0rpmb: error -110 transferring data, sector 8, nr 8, cmd response 0x900, card status 0x0 [ 5.709228] mmc2: tried to reset card [ 5.713043] mmcblk0rpmb: retrying using single block read [ 6.006103] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 6.012847] mmcblk0rpmb: error -110 transferring data, sector 56, nr 8, cmd response 0x900, card status 0x0 [ 6.022796] mmc2: tried to reset card [ 6.026458] mmcblk0rpmb: retrying using single block read [ 6.323608] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 6.330352] mmcblk0rpmb: error -110 transferring data, sector 120, nr 8, cmd response 0x900, card status 0x0 [ 6.340362] mmc2: tried to reset card [ 6.344085] mmcblk0rpmb: retrying using single block read [ 6.557403] mmci-pl18x 80114000.sdi4_per2: error during DMA transfer! [ 6.564331] mmcblk0rpmb: error -110 transferring data, sector 64, nr 8, cmd response 0x900, card status 0x0 [ 6.574218] mmc2: tried to reset card [ 6.577911] mmcblk0rpmb: retrying using single block read

[PYBOOT] [snowball 03:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 03:09]: got exception: timeout ~$off

[PYBOOT] [snowball 03:11]: Done. Board socfpga-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.189390] dw_mmc ff704000.dwmmc0: Version ID is 240a [ 1.194550] dw_mmc ff704000.dwmmc0: DW MMC controller at irq 30, 32 bit host data width, 1024 deep fifo [ 1.204038] dw_mmc ff704000.dwmmc0: Got CD GPIO [ 1.237563] dw_mmc ff704000.dwmmc0: 1 slots initialized [ 1.243326] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.249782] ledtrig-cpu: registered to indicate activity on CPUs [ 1.255949] usbcore: registered new interface driver usbhid [ 1.261511] usbhid: USB HID core driver [ 1.267330] usbcore: registered new interface driver snd-usb-audio [ 1.275407] NET: Registered protocol family 17 [ 1.279869] can: controller area network core (rev 20120528 abi 9) [ 1.286088] NET: Registered protocol family 29 [ 1.290533] can: raw protocol (rev 20120528) [ 1.294799] can: broadcast manager protocol (rev 20120528 t) [ 1.300450] can: netlink gateway (rev 20130117) max_hops=1 [ 1.306268] Key type dns_resolver registered [ 1.310637] ThumbEE CPU extension supported. [ 1.314912] Registering SWP/SWPB emulation handler [ 1.321655] rtc-ds1307 0-0068: setting system clock to 2000-01-01 00:00:24 UTC (946684824) [ 1.331796] ALSA device list: [ 1.334787] No soundcards found. [ 1.338833] Waiting for root device /dev/mmcblk0p2... [ 1.369026] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 50000000Hz, actual 50000000HZ div = 2) [ 1.378884] mmc0: new high speed SDHC card at address 0002 [ 1.384675] mmcblk0: mmc0:0002 SD8GB 7.43 GiB [ 1.391687] mmcblk0: p1 p2 p3 [ 1.449223] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem [ 1.487244] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.495348] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 1.529113] devtmpfs: mounted [ 1.532714] Freeing unused kernel memory: 820K (c0d9d000 [PYBOOT] [socfpga 00:44]: kernel: finished booting, starting userspace. - c0e6a000)

[PYBOOT] [socfpga 03:14]: Timed out waiting for "<type 'str'>":

[PYBOOT] [socfpga 03:15]: got exception: timeout ~$off

[PYBOOT] [socfpga 03:16]: Done.