Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.8-rc8/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:28.96 beaver arm-tegra_defconfig : FAILED 1:43.83 beaver arm-multi_v7_defconfig : FAILED 1:46.13 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:55.33 capri bcm_defconfig : NO BUILD chitra powerpc-ppc64_defconfig : FAILED 1:58.10 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.65 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:47.15 omap5uevm arm-multi_lpae_defconfig : FAILED 2:08.96 snow arm-multi_v7_nosmp_defconfig : FAILED 1:50.02 snowball arm-u8500_defconfig : FAILED 3:17.00 wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.09

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:21.15 arndale arm-exynos_defconfig : passed 1:29.72 arndale arm-multi_v7_defconfig : passed 1:39.38 arndale arm-multi_lpae_defconfig : passed 1:25.99 bbb arm-omap2plus_defconfig : passed 1:44.00 beagleboard-x15 arm-omap2plus_defconfig : passed 0:50.95 beagleboard-x15 arm-multi_v7_defconfig : passed 0:44.62 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:44.55 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 0:55.26 capri arm-multi_v7_defconfig : passed 0:52.24 capri arm-multi_v7_nosmp_defconfig : warnings 0:52.72 chitra powerpc-pasemi_defconfig : passed 1:36.97 colombus arm-sunxi_defconfig : passed 2:05.22 colombus arm-multi_v7_defconfig : passed 2:24.26 colombus arm-multi_lpae_defconfig : passed 2:14.93 cosmic arm-imx_v6_v7_defconfig : passed 3:22.28 cosmic arm-multi_v7_defconfig : passed 2:54.82 cosmic arm-multi_v7_nosmp_defconfig : passed 2:42.47 cubie arm-sunxi_defconfig : passed 0:53.90 cubie arm-multi_v7_defconfig : passed 0:47.37 cubie arm-multi_v7_nosmp_defconfig : passed 0:50.77 cubie2 arm-sunxi_defconfig : passed 0:48.83 cubie2 arm-multi_v7_defconfig : passed 0:56.51 cubie2 arm-multi_lpae_defconfig : passed 0:50.31 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:58.32 cubox arm-multi_v7_defconfig : passed 1:11.18 cubox arm-mvebu_v7_defconfig : passed 1:09.61 cubox arm-multi_v7_nosmp_defconfig : passed 1:30.21 jetsontk1 arm-tegra_defconfig : passed 0:50.72 jetsontk1 arm-multi_v7_defconfig : passed 0:46.95 jetsontk1 arm-multi_lpae_defconfig : passed 0:54.46 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:48.95 omap5uevm arm-omap2plus_defconfig : passed 1:08.21 omap5uevm arm-multi_v7_defconfig : passed 1:03.02 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:17.55 pandaes arm-omap2plus_defconfig : warnings 1:42.96 pandaes arm-multi_v7_defconfig : passed 1:33.38 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:37.33 pi arm-exynos_defconfig : passed 2:11.27 pi arm-multi_v7_defconfig : passed 2:21.70 pi arm-multi_lpae_defconfig : passed 2:16.23 pi arm-multi_v7_nosmp_defconfig : warnings 2:12.27 pit arm-exynos_defconfig : passed 2:11.67 pit arm-multi_v7_defconfig : passed 2:19.83 pit arm-multi_lpae_defconfig : passed 2:26.58 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.39 seaboard arm-tegra_defconfig : passed 1:05.52 seaboard arm-multi_v7_defconfig : passed 1:01.60 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:15.81 seattle arm64-defconfig : warnings 2:20.27 snow arm-exynos_defconfig : passed 2:12.59 snow arm-multi_v7_defconfig : passed 2:01.31 snow arm-multi_lpae_defconfig : passed 2:00.49 snowball arm-multi_v7_defconfig : passed 1:14.22 snowball arm-multi_v7_nosmp_defconfig : warnings 1:11.70 trimslice arm-tegra_defconfig : passed 1:34.86 trimslice arm-multi_v7_defconfig : passed 2:53.99 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:31.23 wandboard arm-multi_v7_defconfig : passed 1:13.08 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:12.85

Offline boards:

bbb arm-multi_v7_defconfig : OFFLINE 1:35.08 bbb arm-multi_v7_nosmp_defconfig : OFFLINE 1:41.47 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:14.10 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:21.46 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:17.74 dalmore arm-tegra_defconfig : OFFLINE 2:18.02 dalmore arm-multi_v7_defconfig : OFFLINE 2:18.79 dalmore arm-multi_lpae_defconfig : OFFLINE 2:21.53 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.12 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:27.47 hummingboard arm-multi_v7_defconfig : OFFLINE 2:18.03 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.52 parallella arm-multi_v7_defconfig : OFFLINE 2:26.66 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.81 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:47.72 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.24 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:46.72 sama5 arm-sama5_defconfig : OFFLINE 2:19.23 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:35.77 socfpga arm-socfpga_defconfig : OFFLINE 2:22.00 socfpga arm-multi_v7_defconfig : OFFLINE 2:24.34 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.88

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.145376] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.152099] mmc0: new DDR MMC card at address 0001 [ 2.156237] mmcblk0: mmc0:0001 M4G1FA 3.73 GiB [ 2.160582] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB [ 2.167433] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB [ 2.174286] mmcblk0rpmb: mmc0:0001 M4G1FA partition 3 128 KiB [c11c31d8] *pgd=4100040e(bad) [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.8.0-rc8 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Sun Sep 25 20:35:47 PDT 2016 [ 2.195471] Modules linked in: [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] Reserved memory: created DMA memory pool at 0xbf800000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node region_mfc_right, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0xbe800000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node region_mfc_left, compatible id shared-dma-pool [ 0.000000] cma: Reserved 64 MiB at 0xba800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 518144 [ 0.000000] free_area_init_node: node 0, pgdat c120ee34, node_mem_map ef028000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 321536 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /work/build/batch/arch/arm/kernel/devtree.c:150 arm_dt_init_cpu_maps+0xe4/0x148 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.8.0-rc8 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)

[PYBOOT] [arndale 02:25]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:26]: got exception: timeout ~$off

[PYBOOT] [arndale 02:27]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.288099] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.295056] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.301576] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.308546] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.314133] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.320850] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf097e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.330850] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.342687] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.349303] [drm] No driver support for vblank timestamp query. [ 3.355240] drm drm: No connectors reported connected with modes [ 3.361246] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.387228] Console: switching to colour frame buffer device 128x48 [ 3.399207] drm drm: fb0: frame buffer device [ 3.418989] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.429759] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.436227] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.441636] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.449460] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.468699] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.475771] hub 1-0:1.0: USB hub found [ 3.479542] hub 1-0:1.0: 1 port detected [ 3.484510] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.489925] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.497672] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.518695] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.525676] hub 2-0:1.0: USB hub found [ 3.529442] hub 2-0:1.0: 1 port detected [ 3.539223] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.552933] vdd_sata,avdd_plle: disabling [ 3.557684] usb1_vbus: disabling [ 3.561750] Waiting for root device /dev/mmcblk0p1... [ 3.863700] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.861156] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:44]: got exception: timeout ~$off

[PYBOOT] [beaver 01:45]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.227758] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.234709] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.241226] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.248167] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.253749] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.260342] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.270335] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.280590] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.287202] [drm] No driver support for vblank timestamp query. [ 3.293143] drm drm: No connectors reported connected with modes [ 3.299145] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.318498] Console: switching to colour frame buffer device 128x48 [ 3.330273] drm drm: fb0: frame buffer device [ 3.334712] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.344804] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.351259] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.356663] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.364376] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.383149] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.389511] hub 1-0:1.0: USB hub found [ 3.393277] hub 1-0:1.0: 1 port detected [ 3.397972] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.403381] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.411037] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.428145] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.434415] hub 2-0:1.0: USB hub found [ 3.438175] hub 2-0:1.0: 1 port detected [ 3.445668] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.458815] vdd_sata,avdd_plle: disabling [ 3.463203] usb1_vbus: disabling [ 3.467114] Waiting for root device /dev/mmcblk0p1... [ 3.768151] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.756728] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:53]: got exception: timeout ~$off

[PYBOOT] [beaver 01:54]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 7.124245] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 7.131314] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.136916] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.144436] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.154438] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.167103] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.173743] [drm] No driver support for vblank timestamp query. [ 7.179747] drm drm: No connectors reported connected with modes [ 7.185757] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.211590] Console: switching to colour frame buffer device 128x48 [ 7.223404] drm drm: fb0: frame buffer device [ 7.260826] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.269990] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.276490] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.281924] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.289896] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.320832] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.328447] hub 1-0:1.0: USB hub found [ 7.332244] hub 1-0:1.0: 1 port detected [ 7.337036] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.342463] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.350337] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.380821] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.388301] hub 2-0:1.0: USB hub found [ 7.392088] hub 2-0:1.0: 1 port detected [ 7.400292] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.418556] vdd_sata,avdd_plle: disabling [ 7.423060] usb1_vbus: disabling [ 7.426446] ALSA device list: [ 7.429403] #0: NVIDIA Tegra Beaver [ 7.433600] Waiting for root device /dev/mmcblk0p1... [ 7.750830] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.836119] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:42]: got exception: timeout ~$off

[PYBOOT] [beaver 01:43]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------

PID hash table entries: 4096 (order: 3, 32768 bytes) Sorting __ex_table... Memory: 4023680K/4194304K available (10012K kernel code, 1748K rwdata, 3432K rodata, 4204K init, 1027K bss, 170624K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 12992 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver cpuidle: using governor menu kworker/u4:0 (39) used greatest stack d [PYBOOT] [chitra 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [chitra 01:56]: got exception: timeout ~$off

[PYBOOT] [chitra 01:57]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 44.643885] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 44.658348] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 92.660054] eth0: device MAC address d2:a7:c7:06:99:cb [ 92.697431] RX IPC Checksum Offload disabled [ 92.702047] No MAC Management Counters available [ 92.707795] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/d2:a7:c7:06:99:cb Sending on LPF/eth0/d2:a7:c7:06:99:cb Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 No DHCPOFFERS received. No working leases in persistent database - sleeping.

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:20]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.882133] Key type dns_resolver registered [ 1.886478] Registering SWP/SWPB emulation handler [ 1.894512] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.899062] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.906478] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.913768] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.920204] [drm] No driver support for vblank timestamp query. [ 1.926225] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.931949] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.943442] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.943470] mmc1: new DDR MMC card at address 0001 [ 1.947276] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0 [ 1.947485] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.963830] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.970136] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.977479] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.982122] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.987838] hub 1-3:1.0: USB hub found [ 1.991378] hub 1-3:1.0: 3 ports detected [ 1.995792] max98090 1-0010: MAX98090 REVID=0x43 [ 1.995958] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.996224] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.997491] mmcblk1: p1 p2 [ 2.016585] max98090 1-0010: use default 2.8v micbias [ 2.025460] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.028866] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.066142] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.083673] VDD10_HDMI_1.0V: disabling [ 2.084590] vdd_g3d: disabling [ 2.085439] BUCK8_P3V3: disabling [ 2.089396] ALSA device list: [ 2.091065] #0: Odroid-U3 [ 2.094687] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:45]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:46]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.462089] bee0: c0f266cc ee65c810 00000000 c0379a08 00000000 ee6cbf10 c0ba9704 00000000 [ 2.470626] bf00: 60000013 00000000 00000003 ee6ca000 ee689ca4 00000000 ee1af0c0 ee689c80 [ 2.479158] bf20: c0388608 00000000 ee6cbf3c c0ba9704 ee6ca000 ee689ca4 00000000 c0388880 [ 2.487689] bf40: 00000000 c0388700 00000000 00000000 ee689cc0 ee689c80 c03887d0 00000000 [ 2.496220] bf60: 00000000 c035d0e8 00000001 00000000 20029012 ee689c80 00000000 00000000 [ 2.504750] bf80: ee6cbf80 ee6cbf80 00000000 00000000 ee6cbf90 ee6cbf90 ee689cc0 ee689cc0 [ 2.513291] bfa0: c035d00c 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.521828] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.530358] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 4899c0cd e9d998e8 [ 2.538898] [<c059f078>] (format_decode) from [<c05a2258>] (vsnprintf+0x60/0x458) [ 2.546707] [<c05a2258>] (vsnprintf) from [<c05a265c>] (vscnprintf+0xc/0x24) [ 2.554066] [<c05a265c>] (vscnprintf) from [<c038576c>] (vprintk_emit+0xf0/0x510) [ 2.561874] [<c038576c>] (vprintk_emit) from [<c0385d14>] (vprintk_default+0x20/0x28) [ 2.570047] [<c0385d14>] (vprintk_default) from [<c03cde1c>] (printk+0x2c/0x3c) [ 2.577674] [<c03cde1c>] (printk) from [<c030bc14>] (die+0x2a8/0x474) [ 2.584394] [<c030bc14>] (die) from [<c031cdf0>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.592665] [<c031cdf0>] (__do_kernel_fault.part.0) from [<c0317e20>] (do_page_fault+0x36c/0x380) [ 2.601924] [<c0317e20>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.609916] [<c03012d8>] (do_DataAbort) from [<c030c438>] (__dabt_svc+0x58/0x80) [ 2.617630] Exception stack(0xee6cbe90 to 0xee6cbed8) [ 2.622897] be80: 00000000 2deb3000 ee6ca000 ee6cbee0 [ 2.631430] bea0: 8149f148 ee689ca4 c1116b40 c1116b40 ee689c80 c0388608 c120269c ee6cbf2c [ 2.639961] bec0: 00000001 ee6cbee0 c0ba9704 c0ba9180 60000013 ffffffff [ 2.646864] [<c030c438>] (__dabt_svc) from [<c0ba9180>] (__schedule+0x44/0x584) [ 2.654486] [<c0ba9180>] (__schedule) from [<c0ba9704>] (schedule+0x44/0x9c) [ 2.661842] [<c0ba9704>] (schedule) from [<c0388880>] (irq_thread+0xb0/0x1f0) [ 2.669296] [<c0388880>] (irq_thread) from [<c035d0e8>] (kthread+0xdc/0xf4) [ 2.676566] [<c035d0e8>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.684094] Code: e3520025 0a0000b2 e2833001 e58d3004 (e5d32000) [ 2.690451] ---[ end trace feb196930114794a ]--- [ 2.695272] Unable to handle kernel paging request at virtual address ffffffec [ 2.702808] pgd = c0204000 [ 2.705623] [ffffffec] *pgd=afffd861, *pte=00000000, *ppte=00000000

[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:08]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

root@snow:~# cat /proc/cpuinfo cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 5.64 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU [ 8.045608] Unable to handle kernel paging request at virtual address c11c31d8 [ 8.051370] pgd = c0204000 [ 8.054060] [c11c31d8] *pgd=4100041e(bad) [ 8.058063] Internal error: Oops: 8000000d [#1] ARM [ 8.062911] Modules linked in: [ 8.065965] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.8.0-rc8 #1 [ 8.073154] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 8.079233] task: c1105fb8 task.stack: c1100000 [ 8.083750] PC is at 0xc11c31d8 [ 8.086893] LR is at cpu_pm_pmu_notify+0x70/0xb4 [ 8.091480] pc : [<c11c31d8>] lr : [<c0a3763c>] psr: 600001d3 [ 8.091480] sp : c1101f88 ip : 00000000 fp : 000000a0 [ 8.102928] r10: 00000000 r9 : 00000001 r8 : c11c3d20 [ 8.108138] r7 : c11c3ce0 r6 : c11c31e0 r5 : 00000001 r4 : c110212c [ 8.114647] r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 [ 8.121161] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 8.128450] Control: 10c53c7d Table: 6d210059 DAC: 00000051 [ 8.134180] Process swapper (pid: 0, stack limit = 0xc1100218) [ 8.139993] Stack: (0xc1101f88 to 0xc1102000) [ 8.144349] 1f80: c1210961 c1102134 c11c31e0 c11c3c80 c1101fac c0b48c70 [ 8.152509] 1fa0: c1100000 c110212c c1101fb4 c0b48e78 00000000 c035b29c ffffffff c1000c40 [ 8.160667] 1fc0: ffffffff ffffffff 00000000 c1000684 00000000 c1091a28 c12121d4 c11020b4 [ 8.168827] 1fe0: c1091a24 c110719c 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 8.177018] [<c0a3763c>] (cpu_pm_pmu_notify) from [<c0b48c70>] (schedule+0x44/0x9c) [ 8.184630] Code: c11c31c4 c11c3310 c11c3310 00000000 (c11c31e0) [ 8.190696] ---[ end trace 91e2d8defa56f448 ]--- [ 8.195286] Kernel panic - not syncing: Attempted to kill the idle task! [ 8.201976] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [snow 01:48]: got exception: ERROR: Timeout waiting for command: cat /proc/cpuinfo. ~$off

[PYBOOT] [snow 01:49]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 7.687469] EXT4-fs error (device mmcblk3p4): ext4_mb_generate_buddy:758: group 9, block bitmap and bg descriptor inconsistent: 2667 vs 2668 free clusters [ 7.702789] EXT4-fs error (device mmcblk3p4): ext4_mb_generate_buddy:758: group 10, block bitmap and bg descriptor inconsistent: 26618 vs 26620 free clusters [ 7.718292] EXT4-fs error (device mmcblk3p4): ext4_mb_generate_buddy:758: group 11, block bitmap and bg descriptor inconsistent: 3230 vs 3234 free clusters [ 7.753112] EXT4-fs (mmcblk3p4): Delayed block allocation failed for inode 2941 at logical offset 0 with max blocks 1 with error 28 [ 7.765014] EXT4-fs (mmcblk3p4): This should not happen!! Data will be lost [ 7.765014] [ 7.773468] EXT4-fs (mmcblk3p4): Total free blocks count 0 [ 7.778961] EXT4-fs (mmcblk3p4): Free/Dirty block details [ 7.784362] EXT4-fs (mmcblk3p4): free_blocks=158 [ 7.788970] EXT4-fs (mmcblk3p4): dirty_blocks=3 [ 7.793548] EXT4-fs (mmcblk3p4): Block reservation details [ 7.799072] EXT4-fs (mmcblk3p4): i_reserved_data_blocks=1 [ 7.810791] JBD2: Spotted dirty metadata buffer (dev = mmcblk3p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [ 8.091278] JBD2: Spotted dirty metadata buffer (dev = mmcblk3p4, blocknr = 0). There's a risk of filesystem corruption in case of system crash. [ 8.186614] random: crng init done [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Root filesystem has insufficient free space; mounting tmpfs on /tmp ...[?25l[?1c7[warn8[?25h[?0c (warning). [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Configuring network interfaces...Cannot find device "eth0" Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 03:14]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 03:15]: got exception: timeout ~$off

[PYBOOT] [snowball 03:16]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 23.223529] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 23.234604] mmcblk0: error -110 sending status command, retrying y" [ 23.243356] mmcblk0: error -110 sending status command, retrying [ 23.251733] mmcblk0: error -110 sending status command, aborting [ 23.262613] mmcblk0: error -110 sending status command, retrying [ 23.270975] mmcblk0: error -110 sending status command, retrying [ 23.279340] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"INIT: INIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "[ 23.340445] mmcblk0: error -110 sending status command, retrying 5" respawning too fast: disabled [ 23.349275] mmcblk0: error -110 sending status command, retrying for 5 minutes [ 23.358118] mmcblk0: error -110 sending status command, aborting [ 23.369014] mmcblk0: error -110 sending status command, retrying [ 23.377382] mmcblk0: error -110 sending status command, retrying [ 23.385769] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"

INIT: Id "3" resp[ 23.397689] mmcblk0: error -110 sending status command, retrying awning too fast: disabled for 5 m[ 23.408756] mmcblk0: error -110 sending status command, retrying inutes INIT: Id "6" respawning[ 23.417627] mmcblk0: error -110 sending status command, aborting too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 83.953868] random: crng init done

[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:58]: Done.