Failed boards:

bbb multi_v7_defconfig : FAILED 1:25.24 panda multi_v7_defconfig : FAILED 1:45.47

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:20.14 arndale exynos_defconfig : passed 1:06.98 bbb omap2plus_defconfig : passed 1:37.18 beaver tegra_defconfig : passed 0:53.88 beaver multi_v7_defconfig : passed 0:50.61 capri bcm_defconfig : passed 0:42.69 capri multi_v7_defconfig : passed 0:44.19 cubie sunxi_defconfig : passed 0:53.22 cubie multi_v7_defconfig : passed 0:51.82 cubie2 sunxi_defconfig : passed 0:51.93 cubie2 multi_v7_defconfig : passed 0:59.34 cubie2 multi_lpae_defconfig : passed 0:50.22 cubox dove_defconfig : warnings 1:07.29 dalmore tegra_defconfig : passed 1:19.69 dalmore multi_v7_defconfig : passed 1:20.80 dalmore multi_lpae_defconfig : passed 1:18.52 panda omap2plus_defconfig : passed 1:19.69 sama5 sama5_defconfig : passed 1:52.96 seaboard tegra_defconfig : passed 0:59.13 seaboard multi_v7_defconfig : passed 1:09.79 snow exynos_defconfig : passed 1:21.04 snowball u8500_defconfig : passed 1:31.68 snowball multi_v7_defconfig : passed 2:14.29 trimslice tegra_defconfig : passed 0:58.85 trimslice multi_v7_defconfig : passed 1:06.98 wandboard imx_v6_v7_defconfig : passed 0:58.21 wandboard multi_v7_defconfig : passed 1:14.84

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board bbb-multi_v7_defconfig failure log: -------------------------------------------------

Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-1062-g25921cf/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350736 (426310 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-1062-g25921cf/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-1062-g25921cf/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-1062-g25921cf/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 472.7 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6

Starting kernel ...

~$off # PYBOOT: Exception: timeout

========================================================================

Board panda-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.422668] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.430114] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.442016] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449676] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456481] usbcore: registered new interface driver usbhid [ 1.462341] usbhid: USB HID core driver [ 1.469268] TCP: cubic registered [ 1.472778] NET: Registered protocol family 17 [ 1.477661] Key type dns_resolver registered [ 1.482543] Power Management for TI OMAP4+ devices. [ 1.487701] Power Management for TI OMAP4. [ 1.492004] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.499145] Registering SWP/SWPB emulation handler [ 1.505157] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517852] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.526184] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.538024] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.538024] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.557037] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.564544] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.576049] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.576507] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.595092] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602813] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610504] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.618072] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.618438] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.631286] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.631286] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646301] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.658233] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665802] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674713] spear_cpufreq: Invalid cpufreq_tbl [ 1.679321] ALSA device list: [ 1.679321] No soundcards found. [ 1.686248] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692504] Waiting for root device /dev/mmcblk0p2... [ 1.776214] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: timeout