Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 23:26.58 bbb arm-omap2plus_defconfig : FAILED 1:54.72 bbb arm-multi_v7_defconfig : FAILED 1:58.36 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:10.10 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:43.33 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:45.64 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:50.33 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:02.25 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.75 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.97 cosmic arm-multi_v7_defconfig : FAILED 2:13.54 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:14.76 dalmore arm-tegra_defconfig : FAILED 1:48.92 dalmore arm-multi_v7_defconfig : FAILED 1:57.72 dalmore arm-multi_lpae_defconfig : FAILED 1:54.46 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:57.20 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:54.56 omap5uevm arm-multi_v7_defconfig : FAILED 0:49.80 omap5uevm arm-multi_lpae_defconfig : FAILED 0:49.02 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:29.47 seaboard arm-tegra_defconfig : FAILED 1:54.23 seaboard arm-multi_v7_defconfig : FAILED 1:52.99 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:50.77 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.01 snowball arm-u8500_defconfig : FAILED 1:55.53 snowball arm-multi_v7_defconfig : FAILED 2:08.60 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:59.48

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:11.15 arndale arm-exynos_defconfig : passed 1:40.23 arndale arm-multi_v7_defconfig : passed 1:26.00 arndale arm-multi_lpae_defconfig : passed 1:22.54 capri arm-bcm_defconfig : passed 0:53.04 capri arm-multi_v7_defconfig : passed 0:59.68 capri arm-multi_v7_nosmp_defconfig : warnings 1:00.27 chitra powerpc-ppc64_defconfig : passed 3:00.10 colombus arm-sunxi_defconfig : passed 2:32.53 colombus arm-multi_v7_defconfig : passed 2:39.18 colombus arm-multi_lpae_defconfig : passed 2:29.25 cubie arm-sunxi_defconfig : passed 0:52.74 cubie arm-multi_v7_defconfig : passed 0:51.32 cubie arm-multi_v7_nosmp_defconfig : passed 0:55.91 cubie2 arm-sunxi_defconfig : passed 0:52.61 cubie2 arm-multi_v7_defconfig : passed 0:51.60 cubie2 arm-multi_lpae_defconfig : passed 0:54.67 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:51.92 cubox arm-multi_v7_defconfig : passed 1:16.35 cubox arm-mvebu_v7_defconfig : passed 1:12.51 cubox arm-multi_v7_nosmp_defconfig : passed 1:15.58 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.39 hummingboard arm-multi_v7_defconfig : passed 1:27.83 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:16.70 jetsontk1 arm-tegra_defconfig : passed 1:34.53 jetsontk1 arm-multi_v7_defconfig : passed 1:35.42 jetsontk1 arm-multi_lpae_defconfig : passed 1:52.95 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:41.17 omap5uevm arm-omap2plus_defconfig : passed 1:04.64 pandaes arm-omap2plus_defconfig : warnings 1:49.66 pandaes arm-multi_v7_defconfig : passed 1:55.06 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:50.28 pi arm-exynos_defconfig : passed 2:13.74 pi arm-multi_v7_defconfig : passed 2:22.47 pi arm-multi_v7_nosmp_defconfig : warnings 2:09.68 pit arm-exynos_defconfig : passed 2:12.15 pit arm-multi_v7_defconfig : passed 2:14.67 pit arm-multi_lpae_defconfig : passed 2:15.92 pit arm-multi_v7_nosmp_defconfig : warnings 2:10.34 seattle arm64-defconfig : warnings 2:20.22 snow arm-exynos_defconfig : passed 2:06.89 snow arm-multi_v7_defconfig : passed 2:14.04 snow arm-multi_lpae_defconfig : passed 1:59.70 trimslice arm-tegra_defconfig : passed 1:33.87 trimslice arm-multi_v7_defconfig : passed 2:57.91 wandboard arm-imx_v6_v7_defconfig : passed 1:22.60 wandboard arm-multi_v7_defconfig : passed 1:01.65 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:19.23

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:11.39 beaver arm-multi_v7_defconfig : OFFLINE 2:18.76 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.89 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.51 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.62 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:19.57 parallella arm-multi_v7_defconfig : OFFLINE 2:22.52 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.94 pi arm-multi_lpae_defconfig : OFFLINE 2:17.08 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.16 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:54.00 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:42.98 sama5 arm-sama5_defconfig : OFFLINE 2:15.80 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:25.68 socfpga arm-socfpga_defconfig : OFFLINE 2:17.96 socfpga arm-multi_v7_defconfig : OFFLINE 2:18.71 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.00 trimslice arm-multi_v7_nosmp_defconfig : OFFLINE 2:20.03

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.589801] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.596413] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.603539] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.609328] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.615847] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.624240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.629298] ehci-pci: EHCI PCI platform driver [ 1.633741] ehci-platform: EHCI generic platform driver [ 1.639071] ehci-omap: OMAP-EHCI Host Controller driver [ 1.644219] ehci-orion: EHCI orion driver [ 1.648204] SPEAr-ehci: EHCI SPEAr driver [ 1.652210] ehci-st: EHCI STMicroelectronics driver [ 1.657074] ehci-exynos: EHCI EXYNOS driver [ 1.661331] ehci-atmel: EHCI Atmel driver [ 1.665230] tegra-ehci: Tegra EHCI driver [ 1.669239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.675304] ohci-pci: OHCI PCI platform driver [ 1.679754] ohci-platform: OHCI generic platform driver [ 1.685040] ohci-omap3: OHCI OMAP3 driver [ 1.689010] SPEAr-ohci: OHCI SPEAr driver [ 1.692997] ohci-st: OHCI STMicroelectronics driver [ 1.697866] ohci-atmel: OHCI Atmel driver [ 1.702133] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.707255] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.715073] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.723574] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 [ 1.729974] hub 1-0:1.0: USB hub found [ 1.733284] hub 1-0:1.0: 1 port detected [ 1.737383] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.742660] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 1.750330] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.758746] hub 2-0:1.0: USB hub found [ 1.762110] hub 2-0:1.0: 1 port detected [ 1.766284] usbcore: registered new interface driver usb-storage [ 1.773003] mousedev: PS/2 mouse device common for all mice [ 1.779801] i2c /dev e [PYBOOT] [arndale 23:20]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 23:21]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.626128] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.636402] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643482] usbcore: registered new interface driver usbhid [ 1.649408] usbhid: USB HID core driver [ 1.661409] NET: Registered protocol family 10 [ 1.668011] sit: IPv6 over IPv4 tunneling driver [ 1.674148] NET: Registered protocol family 17 [ 1.678923] can: controller area network core (rev 20120528 abi 9) [ 1.685565] NET: Registered protocol family 29 [ 1.690289] can: raw protocol (rev 20120528) [ 1.694809] can: broadcast manager protocol (rev 20120528 t) [ 1.700802] can: netlink gateway (rev 20130117) max_hops=1 [ 1.707542] Key type dns_resolver registered [ 1.712449] omap_voltage_late_init: Voltage driver support not added [ 1.720732] ThumbEE CPU extension supported. [ 1.725353] Registering SWP/SWPB emulation handler [ 1.767646] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.774186] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.781952] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.790633] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798549] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.806376] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.814191] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.821547] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.830220] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.838145] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.847881] mmc1: new high speed MMC card at address 0001 [ 1.855117] hctosys: unable to open rtc device (rtc0) [ 1.868134] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.874132] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.881118] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.889981] mmcblk1: p1 p2 [ 1.895699] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:56]: got exception: timeout ~$off

[PYBOOT] [bbb 01:57]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.317324] sdhci: Secure Digital Host Controller Interface driver [ 1.323849] sdhci: Copyright(c) Pierre Ossman [ 1.329659] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.392598] Synopsys Designware Multimedia Card Interface Driver [ 1.399965] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.409133] ledtrig-cpu: registered to indicate activity on CPUs [ 1.415882] usbcore: registered new interface driver usbhid [ 1.421756] usbhid: USB HID core driver [ 1.431359] NET: Registered protocol family 10 [ 1.437843] sit: IPv6 over IPv4 tunneling driver [ 1.443718] NET: Registered protocol family 17 [ 1.448456] can: controller area network core (rev 20120528 abi 9) [ 1.455049] NET: Registered protocol family 29 [ 1.459743] can: raw protocol (rev 20120528) [ 1.464253] can: broadcast manager protocol (rev 20120528 t) [ 1.470231] can: netlink gateway (rev 20130117) max_hops=1 [ 1.476742] Key type dns_resolver registered [ 1.481612] omap_voltage_late_init: Voltage driver support not added [ 1.489409] ThumbEE CPU extension supported. [ 1.502016] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.509569] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.517612] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.525346] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.533028] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.540702] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.547981] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.555649] hctosys: unable to open rtc device (rtc0) [ 1.566388] Waiting for root device /dev/mmcblk0p2... [ 1.601869] mmc1: new high speed MMC card at address 0001 [ 1.608343] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.613399] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.619883] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.628328] mmcblk1: p1 p2

[PYBOOT] [bbb 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:07]: got exception: timeout ~$off

[PYBOOT] [bbb 02:08]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.048499] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.054636] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.060983] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.067879] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.077501] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.087027] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.094065] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.137241] ledtrig-cpu: registered to indicate activity on CPUs [ 2.145944] oprofile: using arm/armv7 [ 2.151030] Initializing XFRM netlink socket [ 2.156111] NET: Registered protocol family 10 [ 2.166814] sit: IPv6 over IPv4 tunneling driver [ 2.175572] NET: Registered protocol family 17 [ 2.180501] NET: Registered protocol family 15 [ 2.185747] Key type dns_resolver registered [ 2.190607] omap_voltage_late_init: Voltage driver support not added [ 2.197340] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.205831] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.216098] ThumbEE CPU extension supported. [ 2.220751] Registering SWP/SWPB emulation handler [ 2.225782] SmartReflex Class3 initialized [ 2.295096] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.302386] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.312899] mmc1: new high speed MMC card at address 0001 [ 2.324974] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.333239] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.340985] hctosys: unable to open rtc device (rtc0) [ 2.346304] sr_init: No PMIC hook to init smartreflex [ 2.352084] sr_init: platform driver register failed for SR [ 2.391817] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.399761] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.414049] mmcblk1: p1 p2 [ 2.431257] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.717440] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724523] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750654] rtc-ds1307 2-006f: SET TIME! [ 1.756407] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763155] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767767] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775967] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781754] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790003] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799164] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806043] hub 1-0:1.0: USB hub found [ 1.809992] hub 1-0:1.0: 1 port detected [ 1.814383] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820158] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828267] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837284] hub 2-0:1.0: USB hub found [ 1.841252] hub 2-0:1.0: 1 port detected [ 1.847276] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881269] vdd_3v3: supplied by regen1 [ 1.919378] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937344] aic_dvdd_fixed: disabling [ 1.942079] Waiting for root device /dev/mmcblk0p1... [ 1.987200] mmc1: new high speed MMC card at address 0001 [ 1.993199] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.998088] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004425] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011462] mmcblk1: p1 [ 2.120151] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155176] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180377] hub 2-1:1.0: USB hub found [ 2.184357] hub 2-1:1.0: 4 ports detected [ 2.276405] hub 1-1:1.0: USB hub found [ 2.280389] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.712345] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719430] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745722] rtc-ds1307 2-006f: SET TIME! [ 1.751486] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758238] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762853] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.771049] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776828] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.785079] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794250] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801126] hub 1-0:1.0: USB hub found [ 1.805077] hub 1-0:1.0: 1 port detected [ 1.809484] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815266] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823384] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832401] hub 2-0:1.0: USB hub found [ 1.836376] hub 2-0:1.0: 1 port detected [ 1.842397] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876336] vdd_3v3: supplied by regen1 [ 1.914462] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.932786] aic_dvdd_fixed: disabling [ 1.937529] Waiting for root device /dev/mmcblk0p1... [ 1.964695] mmc1: new high speed MMC card at address 0001 [ 1.970665] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.975560] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.981898] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.988763] mmcblk1: p1 [ 2.115222] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150247] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175491] hub 2-1:1.0: USB hub found [ 2.179469] hub 2-1:1.0: 4 ports detected [ 2.271514] hub 1-1:1.0: USB hub found [ 2.275501] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.590981] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.598032] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623228] rtc-ds1307 2-006f: SET TIME! [ 1.628843] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635550] rtc-ds1307 2-006f: 64 bytes nvram [ 1.640140] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647521] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653292] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661504] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670657] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677369] hub 1-0:1.0: USB hub found [ 1.681322] hub 1-0:1.0: 1 port detected [ 1.685642] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691407] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699488] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708353] hub 2-0:1.0: USB hub found [ 1.712296] hub 2-0:1.0: 1 port detected [ 1.717531] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753462] vdd_3v3: supplied by regen1 [ 1.784530] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797483] aic_dvdd_fixed: disabling [ 1.802867] Waiting for root device /dev/mmcblk0p1... [ 1.849758] mmc1: new high speed MMC card at address 0001 [ 1.855628] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860458] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866754] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873534] mmcblk1: p1 [ 1.992763] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022784] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051590] hub 2-1:1.0: USB hub found [ 2.055569] hub 2-1:1.0: 4 ports detected [ 2.147591] hub 1-1:1.0: USB hub found [ 2.151560] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 02:00]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:01]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.174962] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181835] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.192223] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.197089] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.203414] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.210267] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219861] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.229370] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.236431] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283780] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290083] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296961] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306565] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316062] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323106] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329220] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335536] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342382] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351973] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361469] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368508] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375208] vdd_3v3: supplied by regen1 [ 2.413900] hctosys: unable to open rtc device (rtc0) [ 2.419198] sr_init: No PMIC hook to init smartreflex [ 2.424704] sr_init: platform driver register failed for SR [ 2.465521] mmc1: new high speed MMC card at address 0001 [ 2.472312] aic_dvdd_fixed: disabling [ 2.473450] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.474109] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.474776] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.484659] mmcblk1: p1 [ 2.496458] ldousb: disabling [ 2.502494] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:42]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.874108] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.888450] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.311095] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.717370] eth0: device MAC address d2:13:28:bb:99:17 [ 89.870902] RX IPC Checksum Offload disabled [ 89.875513] No MAC Management Counters available [ 89.881269] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/d2:13:28:bb:99:17 Sending on LPF/eth0/d2:13:28:bb:99:17 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10

[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:19]: got exception: timeout ~$off

[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.456141] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.530375] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.540694] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.614880] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.625200] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.699427] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.709749] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.783929] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.794251] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.868490] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.878889] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.953070] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.963394] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.037659] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.047985] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.122363] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.132685] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.206915] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.217255] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.291582] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.301905] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.376170] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.386492] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.460714] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.471037] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.545209] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.555531] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.629753] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.640076] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.714256] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.724578] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.798815] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.809139] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.077080] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.151068] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.161140] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.235124] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.245199] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.319182] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.329260] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.403251] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.413329] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.487319] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.497397] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.571385] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.581452] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.655440] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.665513] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.739501] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.749573] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.823564] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.833632] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.907620] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.917693] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.991678] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.001752] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.075738] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.085812] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.159796] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.169872] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.243855] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.253931] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.327919] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.337999] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.412014] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.422094] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:11]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:12]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.872570] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.946482] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.956532] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.030445] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.040497] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114411] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.124471] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198384] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.208444] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.282358] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.292419] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.366367] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376411] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.450332] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460397] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.534308] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.544357] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.618266] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.628313] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.702221] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.712269] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.786176] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.796226] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.870143] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.880198] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.954113] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.964163] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.038077] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.048137] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.122052] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.132111] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.206019] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.216074] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:12]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:14]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.481146] Key type dns_resolver registered [ 2.487544] ThumbEE CPU extension supported. [ 2.491962] Registering SWP/SWPB emulation handler [ 2.521126] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.529437] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.539292] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.555702] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.562484] [drm] No driver support for vblank timestamp query. [ 2.587108] mmc1: new high speed MMC card at address 0001 [ 2.597251] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.605660] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.615151] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.625196] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.635400] mmcblk1: p1 [ 2.740136] Console: switching to colour frame buffer device 240x75 [ 2.827387] drm drm: fb0: frame buffer device [ 2.843983] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.853813] usb2_vbus: supplied by vdd-sys-5v0 [ 2.865609] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.871211] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.880082] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.893926] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.904351] hub 1-0:1.0: USB hub found [ 2.908410] hub 1-0:1.0: 1 port detected [ 2.918504] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.932287] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.996034] dvdd_ts: disabling [ 2.999246] usb1_vbus: disabling [ 3.002505] vdd_cam_1v8_reg: disabling [ 3.010147] Waiting for root device /dev/mmcblk0p1... [ 3.218928] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.196734] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 50.238888] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.485349] Key type dns_resolver registered [ 2.491746] ThumbEE CPU extension supported. [ 2.496164] Registering SWP/SWPB emulation handler [ 2.542973] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.549220] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.557763] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.574943] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.581814] [drm] No driver support for vblank timestamp query. [ 2.593746] mmc1: new high speed MMC card at address 0001 [ 2.603006] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.610137] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.618753] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.628565] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.639250] mmcblk1: p1 [ 2.762334] Console: switching to colour frame buffer device 240x75 [ 2.849274] drm drm: fb0: frame buffer device [ 2.870161] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.880336] usb2_vbus: supplied by vdd-sys-5v0 [ 2.891150] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.896744] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905723] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.920196] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.930563] hub 1-0:1.0: USB hub found [ 2.934578] hub 1-0:1.0: 1 port detected [ 2.944609] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.958245] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.021709] dvdd_ts: disabling [ 3.024923] usb1_vbus: disabling [ 3.028181] vdd_cam_1v8_reg: disabling [ 3.035663] Waiting for root device /dev/mmcblk0p1... [ 3.245196] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.200388] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.515157] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.030925] can: broadcast manager protocol (rev 20120528 t) [ 2.036680] can: netlink gateway (rev 20130117) max_hops=1 [ 2.043321] Key type dns_resolver registered [ 2.048441] ThumbEE CPU extension supported. [ 2.080223] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.085154] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.095253] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.116499] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.123178] [drm] No driver support for vblank timestamp query. [ 2.287336] Console: switching to colour frame buffer device 240x75 [ 2.373244] drm drm: fb0: frame buffer device [ 2.377862] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.385894] usb2_vbus: supplied by vdd-sys-5v0 [ 2.391865] mmc1: new high speed MMC card at address 0001 [ 2.401104] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.406682] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.414767] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.419786] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.426495] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.432575] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.438954] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.445712] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.452839] mmcblk1: p1 [ 2.457725] hub 1-0:1.0: USB hub found [ 2.466067] hub 1-0:1.0: 1 port detected [ 2.474214] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.485531] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.521047] dvdd_ts: disabling [ 2.524230] usb1_vbus: disabling [ 2.527477] vdd_cam_1v8_reg: disabling [ 2.532894] Waiting for root device /dev/mmcblk0p1... [ 2.779319] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.731597] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:55]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:56]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.674046] Bluetooth: RFCOMM ver 1.11 [ 2.677995] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.683389] Bluetooth: BNEP socket layer initialized [ 2.688487] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.694482] Bluetooth: HIDP socket layer initialized [ 2.701501] Key type dns_resolver registered [ 2.711090] Registering SWP/SWPB emulation handler [ 2.741386] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.746507] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.755280] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.778015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.784665] [drm] No driver support for vblank timestamp query. [ 2.962804] Console: switching to colour frame buffer device 240x75 [ 3.049933] drm drm: fb0: frame buffer device [ 3.077006] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.084282] usb2_vbus: supplied by vdd-sys-5v0 [ 3.092718] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.098581] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.107701] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.127013] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.141030] hub 1-0:1.0: USB hub found [ 3.144984] hub 1-0:1.0: 1 port detected [ 3.158814] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.174199] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.269020] dvdd_ts: disabling [ 3.272124] usb1_vbus: disabling [ 3.275385] vdd_cam_1v8_reg: disabling [ 3.280172] ALSA device list: [ 3.283188] #0: NVIDIA Tegra Dalmore [ 3.289206] Waiting for root device /dev/mmcblk0p1... [ 3.467000] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.491346] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.246947] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.678605] usbcore: registered new interface driver usbhid [ 1.683833] usbhid: USB HID core driver [ 1.692594] NET: Registered protocol family 10 [ 1.693230] sit: IPv6 over IPv4 tunneling driver [ 1.696440] NET: Registered protocol family 17 [ 1.700465] NET: Registered protocol family 15 [ 1.705088] Key type dns_resolver registered [ 1.709242] Registering SWP/SWPB emulation handler [ 1.718104] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.719620] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.746102] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.750366] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.760207] max98090 1-0010: MAX98090 REVID=0x43 [ 1.764547] mmc1: new DDR MMC card at address 0001 [ 1.769648] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.773934] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.780076] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.785924] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.792284] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.799548] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.805391] max98090 1-0010: use default 2.8v micbias [ 1.811593] mmcblk1: p1 p2 [ 1.813132] hub 1-3:1.0: USB hub found [ 1.821382] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.824559] hub 1-3:1.0: 3 ports detected [ 1.830616] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.861486] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.879127] VDD10_HDMI_1.0V: disabling [ 1.879812] vdd_g3d: disabling [ 1.880889] BUCK8_2.8V: disabling [ 1.884869] ALSA device list: [ 1.886513] #0: Odroid-U3 [ 1.890131] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:52]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:54]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.075542] b840: 600a0193 00000000 00000000 c06dd3f0 c06dd340 c139f450 c1413a30 0000001e [ 2.075546] b860: c143437c 00000000 ee05a000 00000000 000000e9 c0381c30 000000ea 00000000 [ 2.075550] b880: 00000001 0000001e c14339b0 00000006 00000000 c03827a8 00000400 00000042 [ 2.075554] b8a0: 00000002 c1413a30 600a0193 00000000 c1337708 c0ee2ae8 00000001 ee05a000 [ 2.075557] b8c0: c13024a4 00000000 c1413a30 00000042 c1413a30 c1337708 c143637e 00000000 [ 2.075561] b8e0: 00000000 00000000 00000000 c0382be4 00000000 00000000 00000000 00000000 [ 2.075565] b900: c143637e 00000042 00000001 00000000 600a0193 00000000 00000000 c059663c [ 2.075569] b920: ffffff09 8145ee7c ee05ba70 80000005 00000000 8145ee7c 00000001 ee05bae8 [ 2.075572] b940: c0c1ceac c0382f38 c0ecdeb0 ee05b96c 00000002 c03c7cb4 c0c1ceac ee05b96c [ 2.075576] b960: 00000000 c031cb7c c0ecdeb0 c0ecdea0 8145ee7c c143675c 80000005 c0317c10 [ 2.075580] b980: c143675c c0593880 00000008 ffffff05 ffff0a00 ee05b9b1 ee05b9b1 c0593dac [ 2.075583] b9a0: ffffffff ffffff05 ffff0a00 c130877c 00000005 c0317cbc 8145ee7c ee05ba70 [ 2.075587] b9c0: 00000001 ee05bae8 c0c1ceac c030137c 34000038 ffff1000 00002303 ee05ba51 [ 2.075591] b9e0: 0000000d 00000000 00000001 00000000 00000002 ee05bb88 00000030 00000010 [ 2.075595] ba00: 0000be20 00000000 00000004 00000000 ffffffff 00000000 00000000 c143637c [ 2.075599] ba20: 62653230 65653035 00000014 ffffff05 c1436700 c0ecbc70 ffffffff 00ffffff [ 2.075603] ba40: 003588ef 00000000 ffff0a00 0000004c c141b59c 0000003b 8145ee7c 200a0193 [ 2.075606] ba60: ffffffff ee05baa4 fa212000 c030c58c c0ecbccc ee05bae8 00000025 c0ecbcce [ 2.075610] ba80: ee05bae8 c0ecbccc ee05bb9c c143675c fa212000 00000001 ee05bae8 c0c1ceac [ 2.075614] baa0: 00000000 ee05bac0 c059637c 8145ee7c 200a0193 ffffffff 00000051 00000000 [ 2.075618] bac0: ee05bbac c0ecbcce c141b964 c143637c c0ecbccc c059637c 00000000 c1413a30 [ 2.075621] bae0: 000003e0 c143637c 00000000 00000000 00000004 000003e0 c1413a30 c1337708 [ 2.075625] bb00: c14359a8 fa212000 00000001 00000000 00000000 c0596780 00000000 c0382a50 [ 2.075629] bb20: 00000000 00000000 00000000 00000000 c143637c 0000004d ffffffff 00000000 [ 2.075632] bb40: 600a0193 00000000 00000000 0000b32c 00000000 c0b4fbc4 ee05bfac 600a0193 [ 2.075636] bb60: ee05bc30 fa212000 fa213000 c0b5301a ee05bbdc c0382f38 c0ecbccc ee05bb9c [ 2.075640] bb80: ee05bfb0 c03c7cb4 c0307d38 ee05bb9c ee05c000 c030b90c c0ecbccc c0b4fbc4 [ 2.075643] bba0: c0b4fbc4 c0307d38 c0307d38 ee05bc30 fa212000 c0b4fbc4 00000000 c0310394 [ 2.075647] bbc0: 00000000 ee05bfb0 c0307d38 c0307d38 00000000 c133f988 00000000 c030b968 [ 2.075651] bbe0: c133f988 c058b994 c1410680 00000001 00000000 c030eac4 c1302880 c1340078 [ 2.075655] bc00: fa21200c ee05bc30 fa212000 c03017d4 c030bafc 600a0113 ffffffff ee05bc64 [ 2.075658] bc20: c0b5301c 00000001 c0b5301a c030c494 00000000 c14127a8 00000080 600a0113 [ 2.075662] bc40: c14105dc c1307c3c ee05bdf0 0000000b c0b5301c 00000001 c0b5301a 00000000 [ 2.075666] bc60: 00000000 ee05bc80 c030bac8 c030bafc 600a0113 ffffffff 00000051 c030bac8 [ 2.075669] bc80: ee05a220 0000000b 600a0113 ee05a000 00000000 00000008 65000000 64643432 [ 2.075673] bca0: [PYBOOT] [omap5uevm 00:47]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:48]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.073818] [<c03c7cb4>] (printk) from [<c03177f8>] (show_pte+0x4c/0xf4) [ 2.073824] [<c03177f8>] (show_pte) from [<c031cb88>] (__do_kernel_fault.part.0+0x50/0x1e4) [ 2.073830] [<c031cb88>] (__do_kernel_fault.part.0) from [<c0317c10>] (do_page_fault+0x370/0x384) [ 2.073834] [<c0317c10>] (do_page_fault) from [<c03012c8>] (do_DataAbort+0x3c/0xb8) [ 2.073838] [<c03012c8>] (do_DataAbort) from [<c030c420>] (__dabt_svc+0x40/0x60) [ 2.073840] Exception stack(0xee05be88 to 0xee05bed0) [ 2.073843] be80: 00000001 c0edb3f9 00000067 00000073 2d30da8c ee042700 [ 2.073847] bea0: c0edb3f8 c1140c48 00000000 00000118 00000008 00000000 c13a29c0 ee05bed8 [ 2.073849] bec0: c058dad8 c058dac4 80000013 ffffffff [ 2.073855] [<c030c420>] (__dabt_svc) from [<c058dac4>] (kset_find_obj+0x24/0xb0) [ 2.073861] [<c058dac4>] (kset_find_obj) from [<c077b894>] (driver_find+0x14/0x30) [ 2.073866] [<c077b894>] (driver_find) from [<c077b918>] (driver_register+0x68/0xf4) [ 2.073870] [<c077b918>] (driver_register) from [<c0301e7c>] (do_one_initcall+0x90/0x1d4) [ 2.073877] [<c0301e7c>] (do_one_initcall) from [<c1100db0>] (kernel_init_freeable+0x158/0x1e8) [ 2.073885] [<c1100db0>] (kernel_init_freeable) from [<c0b4fbc4>] (kernel_init+0x8/0x114) [ 2.073892] [<c0b4fbc4>] (kernel_init) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.073897] Code: a0000193 ffffffff 00000051 00018000 (ee05bb94) [ 2.073900] ---[ end trace 3b74a976d2209b76 ]--- [ 2.073903] Kernel panic - not syncing: Fatal exception in interrupt [ 2.073907] CPU1: stopping [ 2.073910] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.6.0-rc6 #1 [ 2.073912] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.073921] [<c031031c>] (unwind_backtrace) from [<c030b968>] (show_stack+0x10/0x14) [ 2.073927] [<c030b968>] (show_stack) from [<c058b994>] (dump_stack+0x88/0x9c) [ 2.073933] [<c058b994>] (dump_stack) from [<c030eac4>] (handle_IPI+0x16c/0x18c) [ 2.073938] [<c030eac4>] (handle_IPI) from [<c03017d4>] (gic_handle_irq+0x90/0x94) [ 2.073942] [<c03017d4>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.073944] Exception stack(0xee091f88 to 0xee091fd0) [ 2.073948] 1f80: 00000001 00000000 ea000013 f0880000 ee090000 c13024a4 [ 2.073952] 1fa0: 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c 2ddd1000 ee091fd8 [ 2.073955] 1fc0: c032aee0 c0308740 a0000013 ffffffff [ 2.073961] [<c030c494>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.073967] [<c0308740>] (arch_cpu_idle) from [<c03781e0>] (cpu_startup_entry+0x1bc/0x218) [ 2.073972] [<c03781e0>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 2.884522] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:49]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 97.435532] task: ee03afc8 ti: ee4e8000 task.ti: ee03afcc [ 97.441177] PC is at account_system_time+0x60/0x1c8 [ 97.446278] LR is at 0x4 [ 97.448922] pc : [<c0354b44>] lr : [<00000004>] psr: 20000193 [ 97.448922] sp : ee4e9d3c ip : 00736374 fp : 00000001 [ 97.460932] r10: 00000000 r9 : c1036d80 r8 : c1036d8c [ 97.466395] r7 : 00000016 r6 : 00000000 r5 : ee03afc8 r4 : ffffe000 [ 97.473235] r3 : 00000001 r2 : 00000001 r1 : 00000000 r0 : ee03afc8 [ 97.480067] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 97.487630] Control: 10c53c7d Table: 80204059 DAC: 00000051 [ 97.493644] Process
(pid: 0, stack limit = 0xee03b1e4) [ 97.499200] Stack: (0xee4e9d3c to 0xee03cfcc) [ 97.503759] [<c0354b44>] (account_system_time) from [<c036be04>] (update_process_times+0x28/0x64) [ 97.513047] [<c036be04>] (update_process_times) from [<c037ac1c>] (tick_sched_timer+0x5c/0xb0) [ 97.522057] [<c037ac1c>] (tick_sched_timer) from [<c036c8d0>] (__hrtimer_run_queues.constprop.5+0x104/0x184) [ 97.532353] [<c036c8d0>] (__hrtimer_run_queues.constprop.5) from [<c036cae4>] (hrtimer_interrupt+0x88/0x1b0) [ 97.542649] [<c036cae4>] (hrtimer_interrupt) from [<c0925058>] (arch_timer_handler_virt+0x28/0x30) [ 97.552035] [<c0925058>] (arch_timer_handler_virt) from [<c036526c>] (handle_percpu_devid_irq+0x60/0x78) [ 97.561969] [<c036526c>] (handle_percpu_devid_irq) from [<c036195c>] (generic_handle_irq+0x24/0x34) [ 97.571439] [<c036195c>] (generic_handle_irq) from [<c0361ba4>] (__handle_domain_irq+0x54/0xa8) [ 97.580545] [<c0361ba4>] (__handle_domain_irq) from [<c0301620>] (gic_handle_irq+0x54/0x88) [ 97.589291] [<c0301620>] (gic_handle_irq) from [<c030bcd4>] (__irq_svc+0x54/0x70) [ 97.597117] Exception stack(0xee4e9e58 to 0xee4e9ea0) [ 97.602400] 9e40: 00000041 00000000 [ 97.610958] 9e60: c103616c c103616c c11026a8 00000000 60000193 00000000 00000001 c0315140 [ 97.619524] 9e80: c031513e 00000000 60000193 ee4e9ea8 c039add8 c039addc 60000113 ffffffff [ 97.628083] [<c030bcd4>] (__irq_svc) from [<c039addc>] (panic+0x1e0/0x240) [ 97.635283] [<c039addc>] (panic) from [<c030b5dc>] (die+0x340/0x394) [ 97.641939] [<c030b5dc>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 97.650230] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 97.659517] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 97.667537] Code: e08cc002 e580c210 e0813003 e5803218 (e5d630d0) [ 97.673911] ---[ end trace cb88537fdc8fa237 ]--- [ 97.678736] Kernel panic - not syncing: Fatal exception in interrupt [ 97.685388] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 02:27]: got exception: panic ~$off

[PYBOOT] [omap5uevm 02:28]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.652035] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.662459] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.668942] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.674369] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.682816] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.698540] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.705523] hub 3-0:1.0: USB hub found [ 1.709970] hub 3-0:1.0: 1 port detected [ 1.715023] mmc2: switch to bus width 8 failed [ 1.722038] mmc2: switch to bus width 4 failed [ 1.726555] mmc2: new high speed MMC card at address 0001 [ 1.732990] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.737916] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.744122] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.751424] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.758069] [drm] No driver support for vblank timestamp query. [ 1.764843] mmcblk2: p3 [ 1.771780] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.785532] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.794139] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.806994] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.826120] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.830511] mmc0: new SDIO card at address 0001 [ 1.864777] Console: switching to colour frame buffer device 170x48 [ 1.903452] drm drm: fb0: frame buffer device [ 1.918534] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.925331] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.932408] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.957791] vdd_1v5: disabling [ 1.960874] vdd_1v2: disabling [ 2.578104] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.589547] Waiting for root device /dev/mmcblk0p3... [ 58.561690] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:51]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.617642] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.623972] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.633869] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.640323] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.645736] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.653493] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.669184] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.675759] hub 3-0:1.0: USB hub found [ 1.679599] hub 3-0:1.0: 1 port detected [ 1.690405] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.697031] [drm] No driver support for vblank timestamp query. [ 1.703885] mmc2: switch to bus width 8 failed [ 1.708596] mmc2: switch to bus width 4 failed [ 1.713069] mmc2: new high speed MMC card at address 0001 [ 1.719242] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.732145] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.738945] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.740199] mmcblk2: p3 [ 1.755342] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.762981] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.765733] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.772749] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.803494] Console: switching to colour frame buffer device 170x48 [ 1.847554] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.859420] drm drm: fb0: frame buffer device [ 1.863904] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.870396] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.877410] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.889353] vdd_1v5: disabling [ 1.892413] vdd_1v2: disabling [ 1.898321] mmc0: new SDIO card at address 0001 [ 2.567432] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.578307] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.674525] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.679867] Bluetooth: BNEP socket layer initialized [ 1.684852] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.690788] Bluetooth: HIDP socket layer initialized [ 1.696394] Key type dns_resolver registered [ 1.701924] Registering SWP/SWPB emulation handler [ 1.717544] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.724338] VDDIO_HDMI: supplied by vdd_5v0 [ 1.728780] vdd_sys: supplied by vdd_5v0 [ 1.732862] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.737838] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.744425] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.754896] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.761346] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.766808] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.774797] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.791433] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.799825] hub 3-0:1.0: USB hub found [ 1.803655] hub 3-0:1.0: 1 port detected [ 1.815210] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.821876] [drm] No driver support for vblank timestamp query. [ 1.916482] Console: switching to colour frame buffer device 170x48 [ 1.936253] drm drm: fb0: frame buffer device [ 1.961436] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.968731] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.976391] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.996427] vdd_1v5: disabling [ 1.999478] vdd_1v2: disabling [ 2.002685] ALSA device list: [ 2.005645] #0: NVIDIA Tegra Seaboard [ 2.342465] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.353712] Waiting for root device /dev/mmcblk0p3... [ 60.011538] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:53]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.191353] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.199695] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.240427] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:11]: got exception: timeout ~$off

[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.960296] can: controller area network core (rev 20120528 abi 9) [ 1.966613] NET: Registered protocol family 29 [ 1.971099] can: raw protocol (rev 20120528) [ 1.975402] can: broadcast manager protocol (rev 20120528 t) [ 1.981109] can: netlink gateway (rev 20130117) max_hops=1 [ 1.987487] Key type dns_resolver registered [ 1.992126] ThumbEE CPU extension supported. [ 1.996459] Registering SWP/SWPB emulation handler [ 2.009124] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.016265] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.025817] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.032867] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.039886] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.046905] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.064300] db8500-esram12: disabling [ 2.068115] db8500-esram34: disabling [ 2.072204] V-CSI/DSI: disabling [ 2.075592] mmci-reg: disabling [ 2.080688] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.086730] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.095397] Waiting for root device /dev/mmcblk0p4... [ 2.128875] mmc3: new high speed MMC card at address 0001 [ 2.135192] mmcblk3: mmc3:0001 3.53 GiB [ 2.139648] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.145477] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.151275] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.158172] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:05]: got exception: timeout ~$off

[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.892944] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.900421] ledtrig-cpu: registered to indicate activity on CPUs [ 1.906646] usbcore: registered new interface driver usbhid [ 1.912231] usbhid: USB HID core driver [ 1.919494] NET: Registered protocol family 10 [ 1.974792] sit: IPv6 over IPv4 tunneling driver [ 1.979980] NET: Registered protocol family 17 [ 1.984436] can: controller area network core (rev 20120528 abi 9) [ 1.990661] NET: Registered protocol family 29 [ 1.995117] can: raw protocol (rev 20120528) [ 1.999389] can: broadcast manager protocol (rev 20120528 t) [ 2.005065] can: netlink gateway (rev 20130117) max_hops=1 [ 2.010986] Key type dns_resolver registered [ 2.015441] ThumbEE CPU extension supported. [ 2.069763] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.084442] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.093505] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.100494] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.107482] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.114471] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.126159] db8500-esram12: disabling [ 2.173950] db8500-esram34: disabling [ 2.195678] V-CSI/DSI: disabling [ 2.203918] mmci-reg: disabling [ 2.207519] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.213470] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.234649] Waiting for root device /dev/mmcblk0p4... [ 3.027832] mmc3: new high speed MMC card at address 0001 [ 3.044647] mmcblk3: mmc3:0001 3.53 GiB [ 3.048828] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.064331] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.069854] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.085693] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:57]: got exception: timeout ~$off

[PYBOOT] [snowball 01:58]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.786376] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.797271] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.814086] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.824951] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.861602] NET: Registered protocol family 10 [ 2.869415] sit: IPv6 over IPv4 tunneling driver [ 2.876983] NET: Registered protocol family 17 [ 2.881622] NET: Registered protocol family 35 [ 2.886138] NET: Registered protocol family 37 [ 2.890808] Registering SWP/SWPB emulation handler [ 2.897247] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.903533] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.910186] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.920715] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-12 20:19:49 UTC (955570789) [ 2.930053] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.937042] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.944091] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.951141] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.964569] db8500-esram12: disabling [ 2.968383] db8500-esram34: disabling [ 2.972503] V-CSI/DSI: disabling [ 2.975769] mmci-reg: disabling [ 2.979064] ALSA device list: [ 2.982086] #0: MOP500-card [ 2.985412] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.991394] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.997619] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:53]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done.