Automated DT boot report for various ARM defconfigs.

Tree/Branch: arm-soc Git describe: v3.14-rc5-1285-g819361f Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: multi_v7_defconfig

Full Report ===========

omap2plus_defconfig ------------------- legacy,3730xm 0 min 53.0 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS legacy,3530beagle 0 min 37.1 sec: PASS (Warnings: 1) omap4-panda 1 min 7.0 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 25.4 sec: PASS omap5-uevm 0 min 58.6 sec: PASS (Warnings: 1) omap4-panda-es 1 min 4.6 sec: PASS legacy,3730storm 0 min 23.6 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1)

multi_lpae_defconfig -------------------- omap5-uevm 1 min 50.3 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.3 sec: PASS

tegra_defconfig --------------- tegra30-beaver 0 min 17.3 sec: PASS

imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 16.9 sec: PASS

sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 17.8 sec: PASS

bcm_defconfig ------------- bcm28155-ap 0 min 22.4 sec: PASS

mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS

exynos_defconfig ---------------- exynos5250-arndale 0 min 30.6 sec: PASS

multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.1 sec: PASS ste-snowball 0 min 50.6 sec: FAIL tegra30-beaver 0 min 21.9 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 49.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.1 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 55.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 14.0 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 22.5 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 19.6 sec: PASS am335x-bone 0 min 26.5 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap5-uevm 1 min 53.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.8 sec: PASS omap4-panda-es 0 min 53.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.1 sec: PASS

u8500_defconfig --------------- ste-snowball 0 min 33.2 sec: PASS

sama5_defconfig --------------- sama5d35ek 0 min 17.0 sec: PASS

davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.7 sec: PASS da850-evm 0 min 15.2 sec: PASS

Console logs for failures =========================

multi_v7_defconfig ------------------

ste-snowball: FAIL: last 80 lines of boot log: ----------------------------------------------

Command(snowball console)> hardreset (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6,

MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1  0 U8500 $ U8500 $ version

U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e

U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4

Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'

U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi

U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi

U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no

U8500 $ setenv autoload no; setenv autoboot nodhcp

U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-xalrsI/tmpkwHPou-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-xalrsI/tmpkwHPou-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-xalrsI/tmpkwHPou-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619817 (467e29 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619753 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 50.59 seconds. # PYBOOT: Result: FAIL