Failed boards:

capri bcm_defconfig : FAILED 1:24.58 snow multi_v7_defconfig : FAILED 1:13.00 snowball u8500_defconfig : FAILED 1:49.51

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:14.16 arndale exynos_defconfig : passed 1:23.82 arndale multi_v7_defconfig : passed 1:32.19 arndale multi_lpae_defconfig : passed 1:18.80 bbb omap2plus_defconfig : passed 1:32.45 bbb multi_v7_defconfig : passed 1:14.83 beaver tegra_defconfig : passed 0:56.84 beaver multi_v7_defconfig : passed 0:57.03 capri multi_v7_defconfig : passed 0:40.56 cubie sunxi_defconfig : passed 1:25.85 cubie multi_v7_defconfig : passed 1:09.76 cubie2 sunxi_defconfig : passed 1:15.63 cubie2 multi_v7_defconfig : passed 1:34.25 cubie2 multi_lpae_defconfig : passed 1:18.28 cubox multi_v7_defconfig : passed 1:05.78 dalmore tegra_defconfig : passed 1:22.86 dalmore multi_v7_defconfig : passed 1:22.53 dalmore multi_lpae_defconfig : passed 1:21.34 hummingboard imx_v6_v7_defconfig : passed 1:11.97 hummingboard multi_v7_defconfig : passed 1:09.77 jetson tegra_defconfig : passed 0:59.61 jetson multi_v7_defconfig : passed 0:59.27 jetson multi_lpae_defconfig : passed 0:58.36 omap5uevm omap2plus_defconfig : warnings 1:05.01 omap5uevm multi_v7_defconfig : warnings 2:05.30 omap5uevm multi_lpae_defconfig : warnings 1:59.64 panda omap2plus_defconfig : warnings 1:33.55 panda multi_v7_defconfig : warnings 1:38.64 sama5 sama5_defconfig : warnings 2:10.15 seaboard tegra_defconfig : passed 1:09.18 seaboard multi_v7_defconfig : passed 1:12.50 snow exynos_defconfig : passed 1:29.63 snow multi_lpae_defconfig : passed 1:22.74 snowball multi_v7_defconfig : passed 3:26.67 trimslice tegra_defconfig : passed 1:10.35 trimslice multi_v7_defconfig : passed 1:01.31 wandboard imx_v6_v7_defconfig : passed 1:21.20 wandboard multi_v7_defconfig : passed 1:09.69

Offline boards:

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board capri-bcm_defconfig failure log: -------------------------------------------------

[ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1800 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout

========================================================================

Board snow-multi_v7_defconfig failure log: -------------------------------------------------

[ 0.000000] Memory: 1998960K/2093056K available (6452K kernel code, 891K rwdata, 2588K rodata, 660K init, 304K bss, 94096K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0adc380 (9041 kB) [ 0.000000] .init : 0xc0add000 - 0xc0b82100 ( 661 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c62d80 ( 892 kB) [ 0.000000] .bss : 0xc0c62d88 - 0xc0caedc8 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000007] Switching to timer-based delay loop [ 2889.632592] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.633140] Console: colour dummy device 80x30 [ 2889.633152] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.633159] pid_max: default: 32768 minimum: 301 [ 2889.633219] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.633225] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.633494] CPU: Testing write buffer coherency: ok [ 2889.633602] CPU0: update cpu_capacity 1024 [ 2889.633608] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.633703] Setting up static identity map for 0x4081c098 - 0x4081c130 [ 2889.634816] CPU1: Booted secondary processor [ 2889.634852] CPU1: update cpu_capacity 1024 [ 2889.634855] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.634898] Brought up 2 CPUs [ 2889.634906] SMP: Total of 2 processors activated. [ 2889.634910] CPU: All CPU(s) started in HYP mode. [ 2889.634914] CPU: Virtualization extension~$off # PYBOOT: Exception: timeout

========================================================================

Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.558624] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570556] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577850] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589355] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597930] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.609832] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.617156] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.628631] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.636474] HS USB OTG: no transceiver configured [ 3.641174] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.649017] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.656951] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668884] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676177] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687652] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.696228] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.708160] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.715484] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.726959] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.734771] HS USB OTG: no transceiver configured [ 3.739471] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.747344] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.755249] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.767181] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774505] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785980] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.794586] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.806488] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.813812] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.825286] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.833099] HS USB OTG: no transceiver configured [ 3.837799] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.845672] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.853576] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.865509] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.872833] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.884307] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.892883] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout