Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc3-87-gbb96727/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.85 beaver arm-multi_v7_defconfig : FAILED 1:50.94 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.56 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.95 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.86 omap5uevm arm-multi_lpae_defconfig : FAILED 2:14.95 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:51.92 pi arm-multi_v7_defconfig : FAILED 2:02.15 pi arm-multi_lpae_defconfig : FAILED 1:52.11 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:25.38 arndale arm-exynos_defconfig : passed 1:35.88 arndale arm-multi_v7_defconfig : passed 1:21.88 arndale arm-multi_lpae_defconfig : passed 1:29.27 bbb arm-omap2plus_defconfig : passed 1:41.30 bbb arm-multi_v7_defconfig : passed 1:20.71 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:50.28 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:58.42 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:58.83 capri arm-bcm_defconfig : passed 0:50.24 capri arm-multi_v7_defconfig : passed 0:59.89 chitra powerpc-pasemi_defconfig : passed 2:05.40 chitra powerpc-ppc64_defconfig : passed 2:00.34 colombus arm-sunxi_defconfig : passed 2:34.30 colombus arm-multi_v7_defconfig : passed 2:30.78 colombus arm-multi_lpae_defconfig : passed 2:31.83 cosmic arm-imx_v6_v7_defconfig : passed 3:19.69 cosmic arm-multi_v7_defconfig : passed 2:58.50 cubie arm-sunxi_defconfig : passed 0:51.39 cubie arm-multi_v7_defconfig : passed 1:07.53 cubie2 arm-sunxi_defconfig : passed 0:58.10 cubie2 arm-multi_v7_defconfig : passed 0:58.81 cubie2 arm-multi_lpae_defconfig : passed 0:53.22 cubox arm-multi_v7_defconfig : passed 1:10.15 cubox arm-mvebu_v7_defconfig : passed 1:18.90 dalmore arm-tegra_defconfig : warnings 1:28.63 dalmore arm-multi_v7_defconfig : warnings 1:45.58 dalmore arm-multi_lpae_defconfig : warnings 1:30.28 jetsontk1 arm-tegra_defconfig : warnings 0:52.47 jetsontk1 arm-multi_v7_defconfig : warnings 0:52.34 jetsontk1 arm-multi_lpae_defconfig : warnings 0:55.34 pandaes arm-omap2plus_defconfig : warnings 1:37.43 pandaes arm-multi_v7_defconfig : passed 1:44.99 parallella arm-multi_v7_defconfig : passed 2:41.89 pit arm-exynos_defconfig : passed 2:11.55 pit arm-multi_v7_defconfig : passed 2:28.46 pit arm-multi_lpae_defconfig : passed 2:12.54 seaboard arm-tegra_defconfig : warnings 1:04.19 seaboard arm-multi_v7_defconfig : warnings 0:57.67 seattle arm64-defconfig : passed 2:25.74 snow arm-exynos_defconfig : passed 2:42.37 snow arm-multi_v7_defconfig : passed 2:00.88 snow arm-multi_lpae_defconfig : passed 2:01.05 snowball arm-u8500_defconfig : passed 1:22.78 snowball arm-multi_v7_defconfig : passed 1:41.02 trimslice arm-tegra_defconfig : warnings 2:47.47 trimslice arm-multi_v7_defconfig : warnings 1:35.90 wandboard arm-imx_v6_v7_defconfig : passed 1:16.17 wandboard arm-multi_v7_defconfig : passed 1:16.44

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:21.61 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:34.23 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:23.32 hummingboard arm-multi_v7_defconfig : OFFLINE 2:11.85 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:57.28 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:44.81 sama5 arm-sama5_defconfig : OFFLINE 2:32.07 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:20.34 socfpga arm-socfpga_defconfig : OFFLINE 2:42.34 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.15

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.430046] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.436565] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.443513] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.449100] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.456106] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.466104] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.477612] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.484228] [drm] No driver support for vblank timestamp query. [ 3.490168] drm drm: No connectors reported connected with modes [ 3.496175] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.522997] Console: switching to colour frame buffer device 128x48 [ 3.535336] drm drm: fb0: frame buffer device [ 3.553672] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.564468] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.570931] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.576339] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.584176] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.598679] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.605731] hub 1-0:1.0: USB hub found [ 3.609502] hub 1-0:1.0: 1 port detected [ 3.614426] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.619837] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.627572] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.638672] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.645635] hub 2-0:1.0: USB hub found [ 3.649408] hub 2-0:1.0: 1 port detected [ 3.658041] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.671728] vdd_sata,avdd_plle: disabling [ 3.676444] usb1_vbus: disabling [ 3.680537] Waiting for root device /dev/mmcblk0p1... [ 3.963678] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.908805] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 77.118677] random: nonblocking pool is initialized

[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:48]: got exception: timeout ~$off

[PYBOOT] [beaver 01:49]: Done.

========================================================================

Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 6.454177] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.461217] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.466817] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.474319] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.484316] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.497230] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.503848] [drm] No driver support for vblank timestamp query. [ 6.509852] drm drm: No connectors reported connected with modes [ 6.515878] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.542853] Console: switching to colour frame buffer device 128x48 [ 6.554657] drm drm: fb0: frame buffer device [ 6.581062] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.590332] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.596807] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.602239] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.610206] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.631067] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.638953] hub 1-0:1.0: USB hub found [ 6.642733] hub 1-0:1.0: 1 port detected [ 6.647527] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.652950] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.660832] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.681060] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.688838] hub 2-0:1.0: USB hub found [ 6.692619] hub 2-0:1.0: 1 port detected [ 6.702224] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.720351] vdd_sata,avdd_plle: disabling [ 6.725074] usb1_vbus: disabling [ 6.728478] ALSA device list: [ 6.731490] #0: NVIDIA Tegra Beaver [ 6.735688] Waiting for root device /dev/mmcblk0p1... [ 7.011066] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.012595] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:47]: got exception: timeout ~$off

[PYBOOT] [beaver 01:48]: Done.

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.791169] NET: Registered protocol family 10 [ 1.791799] sit: IPv6 over IPv4 tunneling driver [ 1.796681] NET: Registered protocol family 17 [ 1.799920] NET: Registered protocol family 15 [ 1.804416] Key type dns_resolver registered [ 1.808724] Registering SWP/SWPB emulation handler [ 1.816660] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.821277] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.828695] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.835851] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.842432] [drm] No driver support for vblank timestamp query. [ 1.848350] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.854741] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.859891] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.867070] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.875819] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.885573] mmc1: new DDR MMC card at address 0001 [ 1.890557] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.894824] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.900657] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.906359] max98090 1-0010: MAX98090 REVID=0x43 [ 1.911146] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.917705] mmcblk1: p1 p2 [ 1.920121] max98090 1-0010: use default 2.8v micbias [ 1.930820] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.934182] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.971637] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.988935] VDD10_HDMI_1.0V: disabling [ 1.989623] vdd_g3d: disabling [ 1.990695] BUCK8_2.8V: disabling [ 1.994647] ALSA device list: [ 1.996322] #0: Odroid-U3 [ 1.999971] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:50]: Done.

========================================================================

Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.978067] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984613] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992653] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.003772] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011915] ldo9: bypassed regulator has no supply! [ 2.017040] ldo9: failed to get the current voltage(-517) [ 2.022710] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.036917] smsc95xx v1.0.4 [ 2.040934] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064273] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070684] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.098158] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fe:eb:ab:1e:ad:7d [ 2.110018] smps9: Bringing 0uV into 2100000-2100000uV [ 2.128960] ldo9: bypassed regulator has no supply! [ 2.134080] ldo9: failed to get the current voltage(-517) [ 2.139742] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153879] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182440] smps9: Bringing 0uV into 2100000-2100000uV [ 2.201345] ldo9: bypassed regulator has no supply! [ 2.206467] ldo9: failed to get the current voltage(-517) [ 2.212129] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226603] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:28 UTC (946684948) [ 2.242480] pbias_mmc_omap5: disabling [ 2.246437] vmmcsdio_fixed: disabling [ 2.250972] Waiting for root device /dev/mmcblk1p2... [ 2.363510] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.499335] hub 1-2:1.0: USB hub found [ 2.503349] hub 1-2:1.0: 3 ports detected [ 2.509298] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.537311] smps9: Bringing 0uV into 2100000-2100000uV [ 2.556306] ldo9: bypassed regulator has no supply! [ 2.561432] ldo9: failed to get the current voltage(-517) [ 2.567103] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:13]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:14]: Done.

========================================================================

Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.938241] mmc0: new high speed MMC card at address 0001 [ 1.949116] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.954039] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960387] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.970482] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978606] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985138] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993168] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004291] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011377] smsc95xx v1.0.4 [ 2.015105] ldo9: bypassed regulator has no supply! [ 2.020226] ldo9: failed to get the current voltage(-517) [ 2.025891] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.041187] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064302] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.068041] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 06:78:95:52:17:37 [ 2.082388] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112162] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130901] ldo9: bypassed regulator has no supply! [ 2.136018] ldo9: failed to get the current voltage(-517) [ 2.141682] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156201] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.172059] pbias_mmc_omap5: disabling [ 2.176004] vmmcsdio_fixed: disabling [ 2.180548] Waiting for root device /dev/mmcblk1p2... [ 2.293523] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.429333] hub 1-2:1.0: USB hub found [ 2.433347] hub 1-2:1.0: 3 ports detected [ 2.439234] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.467219] smps9: Bringing 0uV into 2100000-2100000uV [ 2.485907] ldo9: bypassed regulator has no supply! [ 2.491030] ldo9: failed to get the current voltage(-517) [ 2.496690] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:08]: Done.

========================================================================

Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 3.996422] ldo9: bypassed regulator has no supply! [ 4.001550] ldo9: failed to get the current voltage(-517) [ 4.007215] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.030140] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.037671] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.044244] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.050559] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.057400] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.066990] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.076482] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.083540] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.089670] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.095972] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.102827] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.112411] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.121905] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.128928] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.169955] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.176250] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.183112] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.192698] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.202197] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.209235] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.229621] smps9: Bringing 0uV into 2100000-2100000uV [ 4.257842] ldo9: bypassed regulator has no supply! [ 4.262969] ldo9: failed to get the current voltage(-517) [ 4.268636] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.288729] hctosys: unable to open rtc device (rtc0) [ 4.294054] sr_init: No PMIC hook to init smartreflex [ 4.299555] sr_init: platform driver register failed for SR [ 4.327211] pbias_mmc_omap5: disabling [ 4.331176] vmmcsdio_fixed: disabling [ 4.337358] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done.

========================================================================

Board pi-arm-exynos_defconfig failure log: -------------------------------------------------

[ 21.241548] BUG: spinlock lockup suspected on CPU#0, kworker/u16:1/80 [ 21.246504] lock: 0xee73f000, .magic: dead4ead, .owner: kworker/u16:1/80, .owner_cpu: 0 [ 21.254571] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc3-00087-gbb96727 #1 [ 21.263677] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.269761] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.277475] [<c010ad18>] (show_stack) from [<c0326ad8>] (dump_stack+0x78/0x8c) [ 21.284677] [<c0326ad8>] (dump_stack) from [<c015994c>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.292483] [<c015994c>] (do_raw_spin_lock) from [<c06d2580>] (__schedule+0x84/0x4b8) [ 21.300289] [<c06d2580>] (__schedule) from [<c06d2a00>] (schedule+0x4c/0xac) [ 21.307316] [<c06d2a00>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.314256] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.320766] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.328659] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.337072] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.344618] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null)) [ 21.351037] Sending NMI to all CPUs: [ 21.354591] NMI backtrace for cpu 0 [ 21.358063] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc3-00087-gbb96727 #1 [ 21.367170] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.373251] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.380967] [<c010ad18>] (show_stack) from [<c0326ad8>] (dump_stack+0x78/0x8c) [ 21.388168] [<c0326ad8>] (dump_stack) from [<c032a438>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.395974] [<c032a438>] (nmi_cpu_backtrace) from [<c010c934>] (raise_nmi+0x60/0x64) [ 21.403695] [<c010c934>] (raise_nmi) from [<c032a3b8>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.412630] [<c032a3b8>] (nmi_trigger_all_cpu_backtrace) from [<c0159954>] (do_raw_spin_lock+0x104/0x1d8) [ 21.422173] [<c0159954>] (do_raw_spin_lock) from [<c06d2580>] (__schedule+0x84/0x4b8) [ 21.429981] [<c06d2580>] (__schedule) from [<c06d2a00>] (schedule+0x4c/0xac) [ 21.437008] [<c06d2a00>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.443948] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.450454] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.458348] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.466762] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.474308] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null))

[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:50]: got exception: timeout ~$off

[PYBOOT] [pi 01:51]: Done.

========================================================================

Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.533391] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539745] isl29018 7-0044: Failed to read 1: -6 [ 1.544330] isl29018 7-0044: regmap initialization fails: -6 [ 1.555222] NET: Registered protocol family 10 [ 1.559655] sit: IPv6 over IPv4 tunneling driver [ 1.563231] NET: Registered protocol family 17 [ 1.567238] can: controller area network core (rev 20120528 abi 9) [ 1.573429] NET: Registered protocol family 29 [ 1.577815] can: raw protocol (rev 20120528) [ 1.582065] can: broadcast manager protocol (rev 20120528 t) [ 1.587707] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593430] Key type dns_resolver registered [ 1.597752] ThumbEE CPU extension supported. [ 1.601676] Registering SWP/SWPB emulation handler [ 1.611533] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617012] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623378] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628754] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638846] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649178] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654628] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664812] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670993] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676371] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686089] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708623] Waiting for root device /dev/mmcblk0p1... [ 1.712502] mmc0: tuning execution failed: -5 [ 1.716559] mmc0: error -5 whilst initialising MMC card [ 2.583165] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597300] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602758] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609131] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614514] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:50]: got exception: timeout ~$off

[PYBOOT] [pi 01:51]: Done.

========================================================================

Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.533382] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539732] isl29018 7-0044: Failed to read 1: -6 [ 1.544318] isl29018 7-0044: regmap initialization fails: -6 [ 1.555219] NET: Registered protocol family 10 [ 1.559650] sit: IPv6 over IPv4 tunneling driver [ 1.563227] NET: Registered protocol family 17 [ 1.567234] can: controller area network core (rev 20120528 abi 9) [ 1.573425] NET: Registered protocol family 29 [ 1.577813] can: raw protocol (rev 20120528) [ 1.582062] can: broadcast manager protocol (rev 20120528 t) [ 1.587704] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593426] Key type dns_resolver registered [ 1.597749] ThumbEE CPU extension supported. [ 1.601672] Registering SWP/SWPB emulation handler [ 1.611578] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617060] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623426] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628802] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638897] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649226] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654675] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664859] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671041] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676419] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686157] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708681] Waiting for root device /dev/mmcblk0p1... [ 1.712559] mmc0: tuning execution failed: -5 [ 1.716616] mmc0: error -5 whilst initialising MMC card [ 2.583151] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597297] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602756] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609127] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614511] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 02:00]: got exception: timeout ~$off

[PYBOOT] [pi 02:01]: Done.