mainline boot: 5 passed 19 failed (mainline/v3.13-9044-gd30492a) - Kernel-build-reports

29 Jan 2014


      Failed boards:
arndale      exynos_defconfig              :	FAILED	1:19.90
    beaver       tegra_defconfig               :	BUILD FAILED
    beaver       multi_v7_defconfig            :	FAILED	1:02.04
    capri        multi_v7_defconfig            :	FAILED	1:02.53
    cubie        sunxi_defconfig               :	FAILED	1:00.21
    cubie        multi_v7_defconfig            :	FAILED	1:04.73
    cubie2       sunxi_defconfig               :	FAILED	0:58.31
    cubie2       multi_v7_defconfig            :	FAILED	1:03.29
    cubie2       multi_lpae_defconfig          :	FAILED	0:59.14
    cubox        dove_defconfig                :	FAILED	1:11.84
    dalmore      tegra_defconfig               :	BUILD FAILED
    dalmore      multi_v7_defconfig            :	FAILED	1:04.73
    dalmore      multi_lpae_defconfig          :	FAILED	1:04.90
    panda        omap2plus_defconfig           :	FAILED	1:12.61
    panda        multi_v7_defconfig            :	FAILED	1:14.68
    seaboard     tegra_defconfig               :	BUILD FAILED
    snow         exynos_defconfig              :	FAILED	1:11.61
    snowball     u8500_defconfig               :	FAILED	1:12.92
    snowball     multi_v7_defconfig            :	FAILED	1:05.89
    trimslice    tegra_defconfig               :	BUILD FAILED
    trimslice    multi_v7_defconfig            :	FAILED	1:03.91
    wandboard    imx_v6_v7_defconfig           :	FAILED	1:00.35
    wandboard    multi_v7_defconfig            :	FAILED	1:10.76
Successful boards:
apc          vt8500_v6_v7_defconfig        :	passed	1:12.64
    bbb          omap2plus_defconfig           :	passed	1:32.25
    bbb          multi_v7_defconfig            :	passed	1:19.02
    capri        bcm_defconfig                 :	passed	0:41.67
    sama5        sama5_defconfig               :	passed	1:56.07
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-exynos_defconfig failure log:
    -------------------------------------------------
Load address: 0x40800000
Loading: *#################################################################
     #################################################################
     ##########################################################
done
Bytes transferred = 2756288 (2a0ec0 hex)
ARNDALE5250 # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
ARNDALE5250 # tftp 0x407c0000 mainline/v3.13-9044-gd30492a/exynos_defconfig/dtbs/exynos5250-arndale.dtb
tftp 0x407c0000 mainline/v3.13-9044-gd30492a/exynos_defconfig/dtbs/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.176
Filename 'mainline/v3.13-9044-gd30492a/exynos_defconfig/dtbs/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 # printenv bootargs
printenv bootargs
bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw
ARNDALE5250 # bootm 0x40800000 - 0x407c0000
bootm 0x40800000 - 0x407c0000
## Booting kernel from Legacy Image at 40800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2756224 Bytes = 2.6 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 407c0000
   Booting using the fdt blob at 0x407c0000
   Loading Kernel Image ... OK
OK
   Loading Device Tree to 4fff4000, end 4ffff29f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log:
    -------------------------------------------------
setenv serverip 172.16.1.3
Tegra30 (Beaver) # tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     ########################################################
     2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra30 (Beaver) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra30 (Beaver) # tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *##
     860.4 KiB/s
done
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait
Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Loading Device Tree to 8fff7000, end 8ffffcff ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log:
    -------------------------------------------------
(user:build) Load fastboot kernel
GET_DESC ->STRING DESC
sending 'kernel' (3594 KB)...
................................................................................
................................OKAY [  0.774s]
writing 'kernel'...
downloading of 3680904 bytes finished
Flashing Raw Image
Writing to partition 'kernel'
Writing 'kerOKAY [  0.674s]
finished. total time: 1.448s
nel' DONE!
GET_DESC ->STRING DESC
sending 'device-tree' (2 KB)...
OKAY [  0.002s]
writing 'device-tree'...
downloading of 2862 bytes finished
Flashing Raw Image
Writing to partition 'device-tree'
Writing 'device-tree' DONE!
OKAY [  0.011s]
finished. total time: 0.014s
GET_DESC ->STRING DESC
resuming boot...
OKAY [  0.001s]
finished. total time: 0.001s
MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK
MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK
## Flattened Device Tree blob at 9e000000
   Booting using the fdt blob at 0x9e000000
   Using Device Tree in place at 9e000000, end 9e003b2d
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log:
    -------------------------------------------------
sun4i#tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     ########################################################
     2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
     365.2 KiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
node: cubie           status: on
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log:
    -------------------------------------------------
DHCP client bound to address 172.16.1.154
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     ########################################################
     2.6 MiB/s
done
Bytes transferred = 1767720 (1af928 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
     2.1 MiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log:
    -------------------------------------------------
sun7i# tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage
node: cubie2          status: on
tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     ##########################################################
     2.8 MiB/s
done
Bytes transferred = 3700688 (3877d0 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
     441.4 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3877d0 ]
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log:
    -------------------------------------------------
sun7i# tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     ########################################################
     4.1 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
sun7i#setenv serverip 172.16.1.3
 setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
     518.6 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
node: cubie2          status: on
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log:
    -------------------------------------------------
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1node: cubie2          status: on
.3
sun7i# tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     ########################################################
     4 MiB/s
done
Bytes transferred = 1767720 (1af928 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
     441.4 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubox-dove_defconfig failure log:
    -------------------------------------------------
CuBox>> dhcp
dhcp
Unknown command 'dhcp' - try 'help'
CuBox>> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
CuBox>> tftp 0x02000000 tmp/cubox-osf53C/tmp8cWbId-uImage
tftp 0x02000000 tmp/cubox-osf53C/tmp8cWbId-uImage
Using egiga0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.183
Filename 'tmp/cubox-osf53C/tmp8cWbId-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     ##############################################################
done
Bytes transferred = 2805463 (2aced7 hex)
CuBox>> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> bootm 0x02000000  
bootm 0x02000000  
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-01-29   3:09:46 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2805399 Bytes =  2.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... node: cubox           status: on
OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log:
    -------------------------------------------------
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage
tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     ##########################################################
     2.8 MiB/s
done
Bytes transferred = 3700688 (3877d0 hex)
Tegra114 (Dalmore) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
     737.3 KiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x3877d0 ]
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log:
    -------------------------------------------------
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     ########################################################
     2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra114 (Dalmore) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
     664.1 KiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log:
    -------------------------------------------------
Loading: *#################################################################
     #################################################################
     #################################################################
     ########################################################
done
Bytes transferred = 3680968 (382ac8 hex)
Panda # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *####
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3680904 Bytes = 3.5 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Kernel Image ... OK
OK
   Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-omap2plus_defconfig failure log:
    -------------------------------------------------
#################################################################
     #################################################################
     #################################################################
     ################################
done
Bytes transferred = 4275088 (413b90 hex)
Panda # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 mainline/v3.13-9044-gd30492a/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 mainline/v3.13-9044-gd30492a/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'mainline/v3.13-9044-gd30492a/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *####
done
Bytes transferred = 50489 (c539 hex)
Panda #printenv bootargs
 printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4275024 Bytes = 4.1 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Kernel Image ... OK
OK
   Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snow-exynos_defconfig failure log:
    -------------------------------------------------
OK
   Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK
Starting kernel ...
Timer summary in microseconds:
       Mark    Elapsed  Stage
          0          0  reset
    100,000    100,000  spl_start
  1,699,347  1,599,347  board_init_f
  1,749,137     49,790  board_init_r
  1,751,338      2,201  board_init
  1,881,182    129,844  board_init_done
  1,961,004     79,822  id=64
  1,966,426      5,422  main_loop
  3,890,415  1,923,989  usb_start
  8,569,774  4,679,359  tftp_start
  8,569,792         18  id=80
  8,569,794          2  eth_start
 12,357,120  3,787,326  id=81
 12,357,204         84  id=82
 12,357,209          5  id=84
 12,357,211          2  tftp_done
 19,703,739  7,346,528  bootm_start
 19,703,747          8  id=1
 19,783,705     79,958  id=2
 19,783,724         19  id=3
 20,565,222    781,498  id=4
 20,565,223          1  id=5
 20,565,235         12  id=6
 21,287,791    722,556  id=7
 21,287,794          3  id=8
 21,287,808         14  id=15
 21,856,261    568,453  start_kernel
Accumulated time:
               142,578  lcd
Stashed 27 records
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log:
    -------------------------------------------------
smc911x: MAC 08:00:08:1e:0f:44
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-522sRC/tmpRjnk6_-uImage
tftp 0x00100000 tmp/snowball-522sRC/tmpRjnk6_-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-522sRC/tmpRjnk6_-uImage'.
Load address: 0x100000
Loading: *#################################################################
     #################################################################
     #################################################################
     ###########################################################
done
Bytes transferred = 3716481 (38b581 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000  
bootm 0x00100000  
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3716417 Bytes =  3.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log:
    -------------------------------------------------
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-9c9TlJ/tmpIFMocr-uImage
tftp 0x00100000 tmp/snowball-9c9TlJ/tmpIFMocr-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-9c9TlJ/tmpIFMocr-uImage'.
Load address: 0x100000
Loading: *#################################################################
     #################################################################
     #################################################################
     #####
done
Bytes transferred = 2934601 (2cc749 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000  
bootm 0x00100000  
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2934537 Bytes =  2.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
node: snowball        status: on
~$off
# PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log:
    -------------------------------------------------
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x800000
Loading: *#################################################################
     #################################################################
     #################################################################
     ########################################################
     2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra20 (TrimSlice) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x1800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
tftp 0x1800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'.
Load address: 0x1800000
Loading: *##
     598.6 KiB/s
done
Bytes transferred = 20236 (4f0c hex)
Tegra20 (TrimSlice) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000
bootz 0x800000 - 0x1800000
Kernel image @ 0x800000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 01800000
   Booting using the fdt blob at 0x1800000
   Loading Device Tree to 0fff8000, end 0fffff0b ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log:
    -------------------------------------------------
tftp 0x10800000 mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ################
     5.7 MiB/s
done
Bytes transferred = 4999760 (4c4a50 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
     729.5 KiB/s
done
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4c4a50 ]
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log:
    -------------------------------------------------
=> tftp 0x10800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x10800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     ########################################################
     6.1 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=>tftp 0x11000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
 tftp 0x11000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
     559.6 KiB/s
done
Bytes transferred = 34380 (864c hex)
=>printenv bootargs
 printenv boonode: wandboard       status: on
targs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: timeout