Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.5-rc1-23-g075356c/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 19:06.06 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:23.15 cubox arm-multi_v7_defconfig : FAILED 1:58.01 cubox arm-mvebu_v7_defconfig : FAILED 0:39.45 cubox arm-multi_v7_nosmp_defconfig : FAILED 2:07.35 minnowmax x86-minnowmax_defconfig : FAILED 2:15.37 snow arm-multi_v7_nosmp_defconfig : FAILED 0:47.15
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:22.83 arndale arm-exynos_defconfig : passed 1:33.10 arndale arm-multi_v7_defconfig : passed 1:28.16 arndale arm-multi_lpae_defconfig : passed 1:32.95 bbb arm-omap2plus_defconfig : passed 1:44.88 bbb arm-multi_v7_defconfig : passed 1:22.53 bbb arm-multi_v7_nosmp_defconfig : passed 1:30.98 beaver arm-tegra_defconfig : warnings 1:51.27 beaver arm-multi_v7_defconfig : warnings 2:03.73 beaver arm-multi_v7_nosmp_defconfig : warnings 1:39.88 capri arm-bcm_defconfig : passed 1:03.44 capri arm-multi_v7_defconfig : passed 1:10.10 capri arm-multi_v7_nosmp_defconfig : warnings 0:55.83 chitra powerpc-pasemi_defconfig : passed 2:26.33 chitra powerpc-ppc64_defconfig : passed 3:01.54 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:36.64 colibri-vf61 arm-multi_v7_defconfig : passed 1:26.59 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:24.63 colombus arm-sunxi_defconfig : passed 2:37.16 colombus arm-multi_lpae_defconfig : passed 2:36.66 cosmic arm-imx_v6_v7_defconfig : passed 2:28.07 cosmic arm-multi_v7_defconfig : passed 2:39.63 cosmic arm-multi_v7_nosmp_defconfig : passed 2:21.51 cubie arm-sunxi_defconfig : passed 0:57.54 cubie arm-multi_v7_defconfig : warnings 0:54.77 cubie arm-multi_v7_nosmp_defconfig : warnings 0:58.64 cubie2 arm-sunxi_defconfig : passed 0:50.14 cubie2 arm-multi_v7_defconfig : warnings 1:00.22 cubie2 arm-multi_lpae_defconfig : warnings 1:03.79 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:03.30 dalmore arm-tegra_defconfig : warnings 1:24.16 dalmore arm-multi_v7_defconfig : warnings 1:24.33 dalmore arm-multi_lpae_defconfig : warnings 1:34.14 dalmore arm-multi_v7_nosmp_defconfig : warnings 2:17.86 hummingboard arm-imx_v6_v7_defconfig : passed 1:40.51 hummingboard arm-multi_v7_defconfig : passed 1:34.29 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:16.48 jetsontk1 arm-tegra_defconfig : warnings 1:35.22 jetsontk1 arm-multi_v7_defconfig : warnings 1:44.89 jetsontk1 arm-multi_lpae_defconfig : warnings 1:49.62 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 2:14.83 odroidu3 arm-exynos_defconfig : warnings 2:01.53 omap5uevm arm-omap2plus_defconfig : passed 1:05.55 omap5uevm arm-multi_v7_defconfig : passed 1:57.25 omap5uevm arm-multi_lpae_defconfig : passed 1:54.61 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:51.73 pandaes arm-omap2plus_defconfig : passed 1:37.25 pandaes arm-multi_v7_defconfig : passed 1:57.20 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:03.69 parallella arm-multi_v7_defconfig : passed 2:55.79 parallella arm-multi_v7_nosmp_defconfig : warnings 2:46.23 pi arm-exynos_defconfig : passed 2:30.98 pi arm-multi_v7_defconfig : passed 2:53.11 pi arm-multi_lpae_defconfig : passed 2:02.64 pi arm-multi_v7_nosmp_defconfig : warnings 1:48.21 pit arm-exynos_defconfig : passed 2:16.83 pit arm-multi_v7_defconfig : passed 1:58.45 pit arm-multi_lpae_defconfig : passed 1:54.78 pit arm-multi_v7_nosmp_defconfig : warnings 1:56.86 seaboard arm-tegra_defconfig : passed 1:08.90 seaboard arm-multi_v7_defconfig : passed 1:16.26 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:21.49 seattle arm64-defconfig : warnings 2:32.66 snow arm-exynos_defconfig : passed 1:47.42 snow arm-multi_v7_defconfig : passed 2:12.92 snow arm-multi_lpae_defconfig : passed 2:03.74 snowball arm-u8500_defconfig : passed 1:20.22 snowball arm-multi_v7_defconfig : passed 1:42.04 snowball arm-multi_v7_nosmp_defconfig : warnings 1:22.52 socfpga arm-socfpga_defconfig : passed 1:26.53 socfpga arm-multi_v7_defconfig : passed 1:28.46 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:30.58 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:38.71 wandboard arm-imx_v6_v7_defconfig : passed 1:26.54 wandboard arm-multi_v7_defconfig : passed 2:10.70 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:25.73
Offline boards:
colombus arm-multi_v7_defconfig : OFFLINE 0:55.04 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.44 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:56.60 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:54.75 sama5 arm-sama5_defconfig : OFFLINE 2:24.50 trimslice arm-tegra_defconfig : OFFLINE 2:34.03 trimslice arm-multi_v7_defconfig : OFFLINE 2:36.10
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.585201] usbcore: registered new interface driver cdc_subset [ 1.591101] usbcore: registered new interface driver zaurus [ 1.596682] usbcore: registered new interface driver cdc_ncm [ 1.602975] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.609599] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.616717] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.622507] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.629033] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.837482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.842545] ehci-pci: EHCI PCI platform driver [ 1.846992] ehci-platform: EHCI generic platform driver [ 1.852316] ehci-omap: OMAP-EHCI Host Controller driver [ 1.857465] ehci-orion: EHCI orion driver [ 1.861459] SPEAr-ehci: EHCI SPEAr driver [ 1.865455] ehci-st: EHCI STMicroelectronics driver [ 1.870316] ehci-exynos: EHCI EXYNOS driver [ 1.874570] ehci [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.5.0-rc1-00023-g075356c (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Wed Jan 27 11:56:11 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c1013b64, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130() [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ [PYBOOT] [arndale 19:00]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 19:01]: Done.
========================================================================
Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 44.010382] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 44.025050] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 87.606846] random: dd urandom read with 60 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 92.055985] eth0: device MAC address fa:2a:f0:05:76:60 [ 92.082737] RX IPC Checksum Offload disabled [ 92.087365] No MAC Management Counters available [ 92.093127] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/fa:2a:f0:05:76:60 Sending on LPF/eth0/fa:2a:f0:05:76:60 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
[PYBOOT] [colombus 03:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:21]: got exception: timeout ~$off
[PYBOOT] [colombus 03:22]: Done.
========================================================================
Board cubox-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 68.165224] [<c029d264>] (hrtimer_interrupt) from [<c08b61f8>] (orion_clkevt_irq_handler+0x14/0x1c) [ 68.174234] [<c08b61f8>] (orion_clkevt_irq_handler) from [<c028c71c>] (handle_irq_event_percpu+0x78/0x130) [ 68.183847] [<c028c71c>] (handle_irq_event_percpu) from [<c028c818>] (handle_irq_event+0x44/0x68) [ 68.192679] [<c028c818>] (handle_irq_event) from [<c028fb3c>] (handle_edge_irq+0xe8/0x1ac) [ 68.200904] [<c028fb3c>] (handle_edge_irq) from [<c028bdfc>] (generic_handle_irq+0x24/0x34) [ 68.209217] [<c028bdfc>] (generic_handle_irq) from [<c04ba6b8>] (orion_bridge_irq_handler+0x50/0x5c) [ 68.218314] [<c04ba6b8>] (orion_bridge_irq_handler) from [<c028bdfc>] (generic_handle_irq+0x24/0x34) [ 68.227401] [<c028bdfc>] (generic_handle_irq) from [<c028c0ac>] (__handle_domain_irq+0x5c/0xb4) [ 68.236059] [<c028c0ac>] (__handle_domain_irq) from [<c020a5b8>] (orion_handle_irq+0x70/0x90) [ 68.244543] [<c020a5b8>] (orion_handle_irq) from [<c0215554>] (__irq_svc+0x54/0x70) [ 68.252158] Exception stack(0xee855d10 to 0xee855d58) [ 68.257189] 5d00: eec72a68 00000000 0000ee81 0000e4c0 [ 68.265331] 5d20: eec72a64 00000000 ee850000 eec72a68 00000002 00000000 c0b68274 00000001 [ 68.273469] 5d40: 00000000 ee855d60 c0a29b4c c0a2b69c 20000013 ffffffff [ 68.280056] [<c0215554>] (__irq_svc) from [<c0a2b69c>] (_raw_spin_lock+0x28/0x40) [ 68.287513] [<c0a2b69c>] (_raw_spin_lock) from [<c0a29b4c>] (__mutex_lock_slowpath+0x44/0x150) [ 68.296091] [<c0a29b4c>] (__mutex_lock_slowpath) from [<c0a29ca0>] (mutex_lock+0x48/0x4c) [ 68.304229] [<c0a29ca0>] (mutex_lock) from [<c0726270>] (phy_probe+0x50/0xd4) [ 68.311330] [<c0726270>] (phy_probe) from [<c072693c>] (phy_attach_direct+0x9c/0x14c) [ 68.319124] [<c072693c>] (phy_attach_direct) from [<c0726aac>] (phy_connect_direct+0x14/0x4c) [ 68.327611] [<c0726aac>] (phy_connect_direct) from [<c08cc410>] (of_phy_connect+0x38/0x5c) [ 68.335846] [<c08cc410>] (of_phy_connect) from [<c0769094>] (mv643xx_eth_probe+0x224/0x700) [ 68.344168] [<c0769094>] (mv643xx_eth_probe) from [<c066bc08>] (platform_drv_probe+0x50/0xac) [ 68.352659] [<c066bc08>] (platform_drv_probe) from [<c066a354>] (driver_probe_device+0x214/0x2c0) [ 68.361496] [<c066a354>] (driver_probe_device) from [<c066a48c>] (__driver_attach+0x8c/0x90) [ 68.369894] [<c066a48c>] (__driver_attach) from [<c06686a8>] (bus_for_each_dev+0x6c/0xa0) [ 68.378033] [<c06686a8>] (bus_for_each_dev) from [<c066994c>] (bus_add_driver+0x1a0/0x218) [ 68.386258] [<c066994c>] (bus_add_driver) from [<c066aca8>] (driver_register+0x78/0xf8) [ 68.394226] [<c066aca8>] (driver_register) from [<c066bcfc>] (__platform_register_drivers+0x64/0xe8) [ 68.403323] [<c066bcfc>] (__platform_register_drivers) from [<c020ad74>] (do_one_initcall+0x90/0x1d8) [ 68.412510] [<c020ad74>] (do_one_initcall) from [<c0e81dfc>] (kernel_init_freeable+0x158/0x1f8) [ 68.421173] [<c0e81dfc>] (kernel_init_freeable) from [<c0a26abc>] (kernel_init+0x8/0xec) [ 68.429233] [<c0a26abc>] (kernel_init) from [<c0210db8>] (ret_from_fork+0x14/0x3c)
[PYBOOT] [cubox 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubox 01:55]: got exception: timeout ~$off
[PYBOOT] [cubox 01:56]: Done.
========================================================================
Board cubox-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.110578] dove-pinctrl f10d0200.pin-ctrl: [Firmware Bug]: Missing pinctrl regs in DTB. Please update your firmware. [ 0.111215] dove-pinctrl f10d0200.pin-ctrl: registered pinctrl driver [ 0.114824] irq: Cannot allocate irq_descs @ IRQ40, assuming pre-allocated [ 0.115117] irq: Cannot allocate irq_descs @ IRQ72, assuming pre-allocated [ 0.118344] mv_xor f1060800.dma-engine: Marvell shared XOR driver [ 0.140986] mv_xor f1060800.dma-engine: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 0.141167] mv_xor f1060900.dma-engine: Marvell shared XOR driver [ 0.165963] mv_xor f1060900.dma-engine: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 0.218425] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.220788] console [ttyS0] disabled [ 0.220835] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 10416666) is a 16550A [ 0.834420] console [ttyS0] enabled [ 0.838614] SuperH (H)SCI(F) driver initialized [ 0.843840] msm_serial: driver initialized [ 0.848075] STMicroelectronics ASC driver initialized [ 0.854393] [drm] Initialized drm 1.1.0 20060810 [ 0.871452] brd: module loaded [ 0.879584] loop: module loaded [ 0.884688] sata_mv f10a0000.sata-host: version 1.28 [ 0.889816] sata_mv f10a0000.sata-host: slots 32 ports 1 [ 0.896626] scsi host0: sata_mv [ 0.900023] ata1: SATA max UDMA/133 irq 30 [ 0.906703] m25p80 spi0.0: found n25q032, expected w25q32 [ 0.912112] m25p80 spi0.0: n25q032 (4096 Kbytes) [ 0.920523] libphy: Fixed MDIO Bus: probed [ 0.925302] CAN device driver interface [ 0.930537] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 0.937477] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.943346] libphy: orion_mdio_bus: probed [ 0.947458] mdio_bus f1072004.mdio-bu:01: mdio_device_register [ 0.953542] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 1.226517] ata1: SATA link down (SStatus 0 SControl F300) [ 77.120536] random: nonblocking pool is initialized
[PYBOOT] [cubox 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubox 02:05]: got exception: timeout ~$off
[PYBOOT] [cubox 02:06]: Done.
========================================================================
Board cubox-arm-mvebu_v7_defconfig failure log: -------------------------------------------------
[ 1.177731] 9e80: 00000000 c07844e0 c0274eb8 c0273160 ef01585c ef1a49b4 c07844e0 ef3e5f80 [ 1.185869] 9ea0: 00000000 c0274404 c0684b54 c02760b4 c07844e0 c07844e0 00000002 c02760b4 [ 1.194009] 9ec0: c0276634 c0275760 c07844cc 00000000 00000002 c02767b4 c058c618 c058c614 [ 1.202147] 9ee0: c072b1cc c075e090 c075e090 ef295500 c072b1cc 00000000 000000ba c074583c [ 1.210285] 9f00: 00000000 c0009874 c0562098 00000011 00000000 00007bc0 cccccc00 c012b830 [ 1.218425] 9f20: 00000000 c0761324 0000039d c06e1b88 c0575928 c003e530 cccccccd 00000000 [ 1.226564] 9f40: c0694d20 00000000 00000006 00000006 c076130c 00000000 c0752cd4 00000006 [ 1.234702] 9f60: c0745834 c0797bc0 c0797bc0 c074583c 00000000 c070edec 00000006 00000006 [ 1.242841] 9f80: 00000000 c070e598 00000000 c0558c74 00000000 00000000 00000000 00000000 [ 1.250980] 9fa0: 00000000 c0558c7c 00000000 c000f7b8 00000000 00000000 00000000 00000000 [ 1.259118] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.267257] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 1.275404] [<c055bf24>] (__mutex_lock_slowpath) from [<c055c04c>] (mutex_lock+0x48/0x4c) [ 1.283546] [<c055c04c>] (mutex_lock) from [<c02eff88>] (phy_probe+0x50/0xd4) [ 1.290656] [<c02eff88>] (phy_probe) from [<c02f0654>] (phy_attach_direct+0x9c/0x14c) [ 1.298448] [<c02f0654>] (phy_attach_direct) from [<c02f07c4>] (phy_connect_direct+0x14/0x4c) [ 1.306940] [<c02f07c4>] (phy_connect_direct) from [<c03ccb94>] (of_phy_connect+0x38/0x5c) [ 1.315173] [<c03ccb94>] (of_phy_connect) from [<c02f64c8>] (mv643xx_eth_probe+0x224/0x700) [ 1.323496] [<c02f64c8>] (mv643xx_eth_probe) from [<c02766c0>] (platform_drv_probe+0x50/0xac) [ 1.331983] [<c02766c0>] (platform_drv_probe) from [<c0274e0c>] (driver_probe_device+0x214/0x2c0) [ 1.340820] [<c0274e0c>] (driver_probe_device) from [<c0274f44>] (__driver_attach+0x8c/0x90) [ 1.349226] [<c0274f44>] (__driver_attach) from [<c0273160>] (bus_for_each_dev+0x6c/0xa0) [ 1.357365] [<c0273160>] (bus_for_each_dev) from [<c0274404>] (bus_add_driver+0x1a0/0x218) [ 1.365591] [<c0274404>] (bus_add_driver) from [<c0275760>] (driver_register+0x78/0xf8) [ 1.373558] [<c0275760>] (driver_register) from [<c02767b4>] (__platform_register_drivers+0x64/0xe8) [ 1.382657] [<c02767b4>] (__platform_register_drivers) from [<c0009874>] (do_one_initcall+0x90/0x1d8) [ 1.391840] [<c0009874>] (do_one_initcall) from [<c070edec>] (kernel_init_freeable+0x154/0x1f4) [ 1.400512] [<c070edec>] (kernel_init_freeable) from [<c0558c7c>] (kernel_init+0x8/0xec) [ 1.408570] [<c0558c7c>] (kernel_init) from [<c000f7b8>] (ret_from_fork+0x14/0x3c) [ 1.416108] Code: e58d9004 e3e05000 e58d3008 e3a08002 (e5832000) [ 1.422228] ---[ end trace bdccf20adee40019 ]--- [ 1.426851] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.426851] [ 1.435942] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.435942]
[PYBOOT] [cubox 00:37]: got exception: panic ~$off
[PYBOOT] [cubox 00:38]: Done.
========================================================================
Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------
[ 1.379861] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 1.387394] TCP: Hash tables configured (established 16384 bind 16384) [ 1.394786] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.401560] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.408940] NET: Registered protocol family 1 [ 1.414089] RPC: Registered named UNIX socket transport module. [ 1.420736] RPC: Registered udp transport module. [ 1.426003] RPC: Registered tcp transport module. [ 1.431277] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.439991] Scanning for low memory corruption every 60 seconds [ 1.448267] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.455267] audit: initializing netlink subsys (disabled) [ 1.461359] audit: type=2000 audit(978307219.653:1): initialized [ 1.476799] NFS: Registering the id_resolver key type [ 1.482500] Key type id_resolver registered [ 1.487192] Key type id_legacy registered [ 1.494973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.503355] io scheduler noop registered [ 1.507767] io scheduler deadline registered [ 1.512664] io scheduler cfq registered (default) [ 1.518859] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.525606] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.534975] ACPI: Power Button [PWRB] [ 1.539224] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.548585] ACPI: Sleep Button [SLPB] [ 1.552821] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.561112] ACPI: Power Button [PWRF] [ 1.569591] ACPI: Invalid active0 threshold [ 1.574622] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.580968] ACPI: Thermal Zone [TZ01] (27 C) [ 1.585929] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.613298] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.633437] 80860F0A:00: ttyS1 at MMIO 0x90930000 (irq = 39, base_baud = 2764800) is a 16550A
[PYBOOT] [minnowmax 02:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [minnowmax 02:13]: got exception: timeout ~$off
[PYBOOT] [minnowmax 02:14]: Done.
========================================================================
Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.876857] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 1.896258] mmc0: MAN_BKOPS_EN bit is not set [ 1.901572] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.910668] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 1.916603] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.925584] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.933590] mmc0: new DDR MMC card at address 0001 [ 1.937100] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.942495] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.949396] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.953912] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 1.960099] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 1.971998] vbat-supply: disabling [ 1.977002] mmcblk0: p2 p3 [ 1.981273] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.988141] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.003367] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.009995] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.017671] devtmpfs: mounted [ 2.020210] Freeing unused kernel memory: 1008K (c0e14000 - c0f10000)
[PYBOOT] [snow 00:44]: kernel: finished booting, starting userspace. [ 2.034780] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.046599] mmc2: new high speed SDIO card at address 0001 [ 1.971998] vbat-supply: disabling [ 1.977002] mmcblk0: p2 p3 [ 2.061843] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.073226] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.5.0-rc1-00023-g075356c #1 [ 2.081729] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.087818] [<c0217980>] (unwind_backtrace) from [<c02144f4>] (show_stack+0x10/0x14) [ 2.095536] [<c02144f4>] (show_stack) from [<c02a3c20>] (panic+0xc4/0x24c) [ 2.102393] [<c02a3c20>] (panic) from [<c0242a88>] (do_exit+0x74c/0x934) [ 2.109075] [<c0242a88>] (do_exit) from [<c02436e8>] (do_group_exit+0x0/0xa4) [ 2.116193] [<c02436e8>] (do_group_exit) from [<c0210b20>] (ret_fast_syscall+0x0/0x3c) [ 2.124092] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 00:45]: got exception: panic ~$off
[PYBOOT] [snow 00:46]: Done.
kernel-build-reports@lists.linaro.org