Failed boards:
cubie2 sunxi_defconfig : FAILED 1:18.62 cubie2 multi_lpae_defconfig : FAILED 1:05.03 cubox dove_defconfig : BUILD FAILED hummingboard imx_v6_v7_defconfig : FAILED 1:06.06 hummingboard multi_v7_defconfig : FAILED 1:01.66 snowball multi_v7_defconfig : FAILED 1:11.26 wandboard imx_v6_v7_defconfig : FAILED 1:02.79 wandboard multi_v7_defconfig : FAILED 1:09.93
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:13.11 arndale exynos_defconfig : passed 1:03.70 bbb omap2plus_defconfig : passed 1:31.77 bbb multi_v7_defconfig : passed 1:18.60 beaver tegra_defconfig : passed 0:48.66 beaver multi_v7_defconfig : passed 0:57.62 capri bcm_defconfig : passed 0:42.49 capri multi_v7_defconfig : passed 0:44.68 cubie sunxi_defconfig : passed 0:53.45 cubie multi_v7_defconfig : passed 1:08.30 cubie2 multi_v7_defconfig : passed 1:10.98 dalmore tegra_defconfig : passed 1:21.45 dalmore multi_v7_defconfig : passed 1:18.34 dalmore multi_lpae_defconfig : passed 1:17.94 omap5uevm omap2plus_defconfig : warnings 1:07.75 omap5uevm multi_v7_defconfig : warnings 1:42.46 omap5uevm multi_lpae_defconfig : warnings 1:42.91 panda omap2plus_defconfig : warnings 1:17.70 panda multi_v7_defconfig : passed 1:30.22 sama5 sama5_defconfig : passed 1:53.76 seaboard tegra_defconfig : passed 1:01.66 seaboard multi_v7_defconfig : passed 1:05.55 snow exynos_defconfig : passed 1:28.28 snowball u8500_defconfig : passed 1:26.98 trimslice tegra_defconfig : passed 0:57.83 trimslice multi_v7_defconfig : passed 1:09.21
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140327/multi_lpae_denode: cubie2 status: on fconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140327/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4595056 (461d70 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140327/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140327/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140327/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 658.2 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461d70 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.077038] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.077057] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.077069] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.078010] Switched to clocksource timer [ 0.081749] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.081767] Could not switch to high resolution mode on CPU 0 [ 0.085108] NET: Registered protocol family 2 [ 0.085586] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085672] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085793] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085876] TCP: reno registered [ 0.085891] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085948] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086157] NET: Registered protocol family 1 [ 0.086551] RPC: Registered named UNIX socket transport module. [ 0.086565] RPC: Registered udp transport module. [ 0.086571] RPC: Registered tcp transport module. [ 0.086577] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.087541] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.088016] bounce pool size: 64 pages [ 0.095860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.095881] io scheduler noop registered [ 0.095887] io scheduler deadline registered [ 0.096059] io scheduler cfq registered (default) [ 0.097680] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.139238] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.141658] console [ttyS0] disabled [ 0.161805] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.658491] console [ttyS0] enabled [ 0.663163] mousedev: PS/2 mouse device common for all mice [ 0.669021] i2c /dev entries driver [ 0.673896] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.682846] TCP: cubic registered [ 0.686167] NET: Registered protocol family 17 [ 0.690691] Registering SWP/SWPB emulation handler [ 0.696423] ahci-5v: 5000 mV [ 0.699644] usb1-vbus: 5000 mV [ 0.703084] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140327/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140327/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 5223928 (4fb5f8 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 1.8 MiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb5f8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140327/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2 MiB/s done Bytes transferred = 4569440 (45b960 hex) C1 U-Boot >setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140327/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140327/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140327/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 793 KiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45b960 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583
Starting kernel ...
ÌÐÙÉM3(¬D0* øD²bcž,-« -'ÄrÊðL@:ÀÈÀ!2ÚSÐÊÊÀ|\ËÒJÚ£xm]Ó%|üðèiÀÚ%Ä0ÐÚÐÞÒ¥³²ÚØÙÄÚRX(ÐÈZð°r°:`°úùß)b²jÀØ:À³ÚhPÒÀÀXØÐØmÐòÒ°žÖ\ÀcØÒÚ,Ô-ÀÐÀØïÚ%#ºÐÒ €CÒ²ÐÓЀIJàžÒÌ0×ÐÀÚÐÀÄÐ8@ÒÀÒ ÀвÒØÀðÂððð³Ð5ÃÒøØøo»~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-b_tZ8S/tmptEkq9Z-uImage tftp 0x00100000 tmp/snowball-b_tZ8S/tmptEkq9Z-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-b_tZ8S/tmptEkq9Z-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4610753 (465ac1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4610689 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140327/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140327/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 5.7 MiB/s done Bytes transferred = 5223928 (4fb5f8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140327/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 585.9 KiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb5f8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140327/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140327/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 6 MiB/s done Bytes transferred = 4569440 (45b960 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140327/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140327/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140327/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.2 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x45b960 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
Ÿû¶þð~}Ïr^Ëm0ùþ_+ž{²÷ûãF÷¶ûõÞCÛ aß óKÂÞfÁ¿×Ö×ÛÒSß÷jÞß÷Ûû×ïºßÞkÓÃtBkû÷KïÏþßyí«®ûÛÚÓkŸÍïïÃý¶ÛOþÛïÚkßoÐi_m¢ÓïÖÛûYûkýpßOÛ»û%í>ûöÛÍÛëö²ûZßðÐ&»ò¿ßïù{ßÒú£ÙOyma_Y}Û;úXqhþy1wüò1ö;º·Ñ$ñÒí[Ÿþùç=4KîÃúÓ¢Ó÷OqËòPñ}ïZ7s±wß}ÛÆþ¥?Û7¶Ùsêím¿ÛÛÛM| í{õÝiiÛWÏß³êyÛSðû¶yû&{ûßëS¶×¿ºú×[fotYô&ò7í_**kß~û[û×Ó÷ß_Li»{ðgvé÷¢Ðïû³{¿®·û÷œ»6æû ß%>{Ö{ÈzrÐÖÖ5ÞCVÒÏßû£Û÷ï#g÷ûÄyÍûs{«Û6²ËþýðFZÖ5_"ß»ÒðzÚÛMËfÛçï÷[jÛ£_ëíÁößûÒ ôÙýþnode: wandboard status: on ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org