Failed boards:
beaver multi_v7_defconfig : FAILED 1:50.02 cubie2 sunxi_defconfig : FAILED 1:26.33 cubie2 multi_v7_defconfig : FAILED 1:38.45 cubie2 multi_lpae_defconfig : FAILED 1:05.87 cubox dove_defconfig : BUILD FAILED snowball u8500_defconfig : FAILED 2:47.27 snowball multi_v7_defconfig : FAILED 1:07.63
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:28.97 arndale exynos_defconfig : passed 1:05.82 beaver tegra_defconfig : passed 1:04.38 cubie sunxi_defconfig : passed 0:51.94 cubie multi_v7_defconfig : passed 1:01.65 seaboard tegra_defconfig : passed 1:14.68 seaboard multi_v7_defconfig : passed 1:09.33
Offline boards:
bbb omap2plus_defconfig : OFFLINE 1:03.70 bbb multi_v7_defconfig : OFFLINE 1:03.71 capri bcm_defconfig : OFFLINE 1:03.69 capri multi_v7_defconfig : OFFLINE 1:03.71 dalmore tegra_defconfig : OFFLINE 1:03.71 dalmore multi_v7_defconfig : OFFLINE 1:03.71 dalmore multi_lpae_defconfig : OFFLINE 1:03.72 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.72 hummingboard multi_v7_defconfig : OFFLINE 1:03.70 omap5uevm omap2plus_defconfig : OFFLINE 1:03.76 omap5uevm multi_v7_defconfig : OFFLINE 1:03.70 omap5uevm multi_lpae_defconfig : OFFLINE 1:03.70 panda omap2plus_defconfig : OFFLINE 1:05.81 panda multi_v7_defconfig : OFFLINE 1:05.81 sama5 sama5_defconfig : OFFLINE 1:05.78 snow exynos_defconfig : OFFLINE 1:05.69 trimslice tegra_defconfig : OFFLINE 1:03.72 trimslice multi_v7_defconfig : OFFLINE 1:03.72 wandboard imx_v6_v7_defconfig : OFFLINE 1:03.76 wandboard multi_v7_defconfig : OFFLINE 1:03.75
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
Scanning mmc 1... MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** mmc0(part 0) is current device Scanning mmc 0... ** File not found /boot.scr.uimg ** node: beaver status: on ** File not found /boot.scr ** ** File not found /boot/boot.scr.uimg ** ** File not found /boot/boot.scr ** (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found
USB device 0: unknown device Waiting for Ethernet connection... done. BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 44 DHCP client bound to address 172.16.1.101 Using asx0 device TFTP from server 172.16.1.7; our IP address is 172.16.1.101 Filename 'boot.scr.uimg'. Load address: 0x90000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # node: beaver status: on ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
tftp 0x40008000 next/next-20140326/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140326/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4595512 (461f38 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 17node: cubie2 status: on 2.16.1.3 sun7i# tftp 0x41000000 next/next-20140326/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140326/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140326/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 385.7 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461f38 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
U-Boot SPL 2013.10-rc2-00709-g3977e12 (Oct 18 2013 - 16:12:20) Board: Cubieboard2 DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 spl: not an uImage at 1600
U-Boot 2013.10-rc2-00709-g3977e12 (Oct 18 2013 - 16:12:20) Allwinner Technology
CPU: Allwinner A20 (SUN7I) Board: Cubieboard2 I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: emac Hit any key to stop autoboot: 3 2 1 node: cubie2 status: on 0 reading uEnv.txt ** Unable to read file uEnv.txt ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading boot.scr ** Unable to read file boot.scr ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading script.bin ** Unable to read file script.bin ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** sun7i# ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.077060] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.077078] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.077091] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.078019] Switched to clocksource timer [ 0.081765] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.081780] Could not switch to high resolution mode on CPU 0 [ 0.085109] NET: Registered protocol family 2 [ 0.085587] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085674] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085795] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085878] TCP: reno registered [ 0.085893] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085950] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086150] NET: Registered protocol family 1 [ 0.086550] RPC: Registered named UNIX socket transport module. [ 0.086564] RPC: Registered udp transport module. [ 0.086570] RPC: Registered tcp transport module. [ 0.086575] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.087531] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.087994] bounce pool size: 64 pages [ 0.095808] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.095828] io scheduler noop registered [ 0.095835] io scheduler deadline registered [ 0.096007] io scheduler cfq registered (default) [ 0.097622] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.139099] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.141513] console [ttyS0] disabled [ 0.161661] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.658358] console [ttyS0] enabled [ 0.663046] mousedev: PS/2 mouse device common for all mice [ 0.668905] i2c /dev entries driver [ 0.673779] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.682741] TCP: cubic registered [ 0.686063] NET: Registered protocol family 17 [ 0.690588] Registering SWP/SWPB emulation handler [ 0.696324] ahci-5v: 5000 mV [ 0.699546] usb1-vbus: 5000 mV [ 0.702994] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-dM7QRe/tmpEJpoPH-uImage tftp 0x00100000 tmp/snowball-dM7QRe/tmpEJpoPH-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-dM7QRe/tmpEJpoPH-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4610977 (465ba1 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4610913 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 18.309112] NET: Registered protocol family 37 [ 18.313751] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 18.321929] Registering SWP/SWPB emulation handler [ 18.334533] l2x0-prefetch: initialized. [ 18.341766] mcde_display_hdmi_init [ 18.346405] regulator_init_complete: LDO-USB: disabling [ 18.351806] regulator_init_complete: db8500-esram34: disabling [ 18.357757] regulator_init_complete: db8500-esram12: disabling [ 18.364227] ab8500-rtc ab8500-rtc.0: setting system clock to 2014-03-26 07:38:27 UTC (1395819507) [ 18.902709] net eth0: SMSC911x/921x identified at 0xe08c0000, IRQ: 300 [ 19.914123] Sending DHCP requests . [ 19.917785] av8100_hdmi av8100_hdmi.1: HDMI display probed [ 20.013214] av8100 0-0070: chip version:2 [ 21.030578] Console: switching to colour frame buffer device 160x45 [ 21.114532] av8100_hdmi av8100_hdmi.1: Framebuffer created (av8100_hdmi) [ 22.622955] .., OK [ 29.732971] IP-Config: Got DHCP answer from 172.16.1.7, my address is 172.16.1.117 [ 29.739807] IP-Config: Complete: [ 29.739837] device=eth0, addr=172.16.1.117, mask=255.255.255.0, gw=172.16.1.1, [ 29.739898] host=172.16.1.117, domain=lixom.net, nis-domain=(none), [ 29.739929] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 29.767761] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 29.834716] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244) [ 30.030731] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended [ 30.043975] EXT4-fs (mmcblk0p3): recovery complete [ 30.052124] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 30.060394] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 30.070495] devtmpfs: mounted [ 30.073730] Freeing init memory: 216K
Last login: Wed Mar 26 01:59:10 UTC 2014 on tty1 Welcome to Linaro 11.09 (development branch) (GNU/Linux 2.6.38-1001-ux500 armv7l)
* Documentation: https://wiki.linaro.org/ root@linaro-nano:~# node: snowball status: on root root -bash: root: command not found root@linaro-nano:~# ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org
-
Olof's autobooter