Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20150609/

Failed boards:

capri arm-multi_v7_defconfig : FAILED 1:47.70 cubox arm-multi_v7_defconfig : FAILED 2:09.98 cubox arm-mvebu_v7_defconfig : FAILED 1:49.05 hummingboard arm-imx_v6_v7_defconfig : FAILED 1:13.51 hummingboard arm-multi_v7_defconfig : FAILED 0:59.34 jetsontk1 arm-multi_v7_defconfig : FAILED 1:04.42 jetsontk1 arm-multi_lpae_defconfig : FAILED 1:02.41 minnowmax x86-minnowmax_defconfig : FAILED 0:43.38 pandaes arm-omap2plus_defconfig : FAILED 1:18.37 pandaes arm-multi_v7_defconfig : FAILED 0:52.33 wandboard arm-imx_v6_v7_defconfig : FAILED 1:02.44 wandboard arm-multi_v7_defconfig : FAILED 1:07.18

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:13.85 arndale arm-exynos_defconfig : passed 1:28.79 bbb arm-omap2plus_defconfig : passed 1:45.53 bbb arm-multi_v7_defconfig : passed 1:23.75 capri arm-bcm_defconfig : passed 1:08.30 chitra powerpc-pasemi_defconfig : passed 0:59.73 chitra powerpc-ppc64_defconfig : warnings 2:24.25 colombus arm-sunxi_defconfig : passed 1:14.01 colombus arm-multi_v7_defconfig : passed 1:11.18 colombus arm-multi_lpae_defconfig : passed 1:09.62 cosmic arm-imx_v6_v7_defconfig : passed 2:08.18 cosmic arm-multi_v7_defconfig : passed 1:42.04 cubie arm-sunxi_defconfig : passed 1:00.12 cubie arm-multi_v7_defconfig : passed 1:08.22 cubie2 arm-sunxi_defconfig : passed 0:58.81 cubie2 arm-multi_v7_defconfig : passed 1:15.52 cubie2 arm-multi_lpae_defconfig : passed 1:16.75 dalmore arm-tegra_defconfig : passed 1:26.74 dalmore arm-multi_v7_defconfig : passed 1:30.11 dalmore arm-multi_lpae_defconfig : passed 1:25.08 jetsontk1 arm-tegra_defconfig : passed 0:54.34 odroidu3 arm-exynos_defconfig : passed 1:01.18 omap5uevm arm-omap2plus_defconfig : passed 1:05.62 omap5uevm arm-multi_v7_defconfig : passed 1:10.41 omap5uevm arm-multi_lpae_defconfig : passed 1:21.00 pi arm-exynos_defconfig : passed 0:56.20 pi arm-multi_v7_defconfig : passed 0:57.43 pi arm-multi_lpae_defconfig : passed 1:09.41 pit arm-exynos_defconfig : passed 0:56.90 pit arm-multi_v7_defconfig : passed 1:04.94 pit arm-multi_lpae_defconfig : passed 1:15.02 rk3288evb arm-multi_v7_defconfig : passed 0:57.57 rk3288evb arm-multi_lpae_defconfig : passed 0:44.52 sama5 arm-sama5_defconfig : passed 1:26.19 seaboard arm-tegra_defconfig : passed 1:03.45 seaboard arm-multi_v7_defconfig : passed 1:08.49 snow arm-exynos_defconfig : passed 1:04.90 snowball arm-u8500_defconfig : passed 1:20.58 snowball arm-multi_v7_defconfig : passed 1:27.55 socfpga arm-socfpga_defconfig : passed 1:07.88 socfpga arm-multi_v7_defconfig : passed 1:21.07 trimslice arm-tegra_defconfig : passed 0:54.15 trimslice arm-multi_v7_defconfig : passed 1:00.95

Offline boards:

arndale arm-multi_v7_defconfig : OFFLINE 1:09.61 arndale arm-multi_lpae_defconfig : OFFLINE 1:12.00 beaver arm-tegra_defconfig : OFFLINE 1:23.81 beaver arm-multi_v7_defconfig : OFFLINE 1:23.87 parallella arm-multi_v7_defconfig : OFFLINE 1:28.62 snow arm-multi_v7_defconfig : OFFLINE 0:50.26 snow arm-multi_lpae_defconfig : OFFLINE 0:41.71

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 0.480000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.485000] sdhci-kona 3f1b0000.sdio: Got CD GPIO [ 0.530000] mmc0: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.530000] ledtrig-cpu: registered to indicate activity on CPUs [ 0.535000] usbcore: registered new interface driver usbhid [ 0.535000] usbhid: USB HID core driver [ 0.540000] NET: Registered protocol family 17 [ 0.540000] can: controller area network core (rev 20120528 abi 9) [ 0.545000] NET: Registered protocol family 29 [ 0.545000] can: raw protocol (rev 20120528) [ 0.545000] can: broadcast manager protocol (rev 20120528 t) [ 0.550000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.550000] Key type dns_resolver registered [ 0.555000] ThumbEE CPU extension supported. [ 0.555000] Registering SWP/SWPB emulation handler [ 0.560000] hctosys: unable to open rtc device (rtc0) [ 0.560000] gpldo6: disabling [ 0.565000] gpldo5: disabling [ 0.565000] gpldo4: disabling [ 0.565000] gpldo3: disabling [ 0.570000] gpldo2: disabling [ 0.570000] gpldo1: disabling [ 0.570000] vsr: disabling [ 0.575000] sdsr2: disabling [ 0.575000] sdsr1: disabling [ 0.575000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.585000] mmcldo1: disabling [ 0.585000] ttyS0 - failed to request DMA [ 0.590000] Waiting for root device /dev/mmcblk0p8... [ 39.065000] random: nonblocking pool is initialized

[PYBOOT] [capri 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [capri 01:46]: got exception: timeout ~$off

[PYBOOT] [capri 01:47]: Done.

========================================================================

Board cubox-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.344382] usbcore: registered new interface driver usb-storage [ 1.352140] mousedev: PS/2 mouse device common for all mice [ 1.360046] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.369765] i2c /dev entries driver [ 1.375308] i2c-mux-pinctrl i2c-mux: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-i2cmux-0, deferring probe [ 1.390480] orion_wdt: Initial timeout 25 sec [ 1.396784] sdhci: Secure Digital Host Controller Interface driver [ 1.402964] sdhci: Copyright(c) Pierre Ossman [ 1.408484] Synopsys Designware Multimedia Card Interface Driver [ 1.415300] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.421253] sdhci-dove f1092000.sdio-host: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-sdio0, deferring probe [ 1.434301] leds-gpio leds: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-gpio-18, deferring probe [ 1.445592] ledtrig-cpu: registered to indicate activity on CPUs [ 1.451838] usbcore: registered new interface driver usbhid [ 1.457403] usbhid: USB HID core driver [ 1.464221] NET: Registered protocol family 17 [ 1.468660] can: controller area network core (rev 20120528 abi 9) [ 1.474908] NET: Registered protocol family 29 [ 1.479358] can: raw protocol (rev 20120528) [ 1.483614] can: broadcast manager protocol (rev 20120528 t) [ 1.489270] can: netlink gateway (rev 20130117) max_hops=1 [ 1.495180] Key type dns_resolver registered [ 1.499635] ThumbEE CPU extension supported. [ 1.503898] Registering SWP/SWPB emulation handler [ 1.508690] PJ4 iWMMXt v2 coprocessor enabled. [ 1.513340] ata1: SATA link down (SStatus 0 SControl F300) [ 1.520555] reg-fixed-voltage regulators:regulator@1: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-gpio-1, deferring probe [ 1.535339] orion_spi f1010600.spi-ctrl: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-spi0, deferring probe [ 1.548334] i2c-mux-pinctrl i2c-mux: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-i2cmux-0, deferring probe [ 1.561218] sdhci-dove f1092000.sdio-host: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-sdio0, deferring probe [ 1.574254] leds-gpio leds: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-gpio-18, deferring probe [ 1.586079] rtc-mv f10d8500.real-time-clock: setting system clock to 2015-06-09 15:06:25 UTC (1433862385) [ 1.597498] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [cubox 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubox 02:07]: got exception: timeout ~$off

[PYBOOT] [cubox 02:09]: Done.

========================================================================

Board cubox-arm-mvebu_v7_defconfig failure log: -------------------------------------------------

[ 1.210455] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.219068] i2c /dev entries driver [ 1.224415] orion_wdt: Initial timeout 25 sec [ 1.229249] sdhci: Secure Digital Host Controller Interface driver [ 1.235447] sdhci: Copyright(c) Pierre Ossman [ 1.240003] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.245738] sdhci-dove f1092000.sdio-host: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-sdio0, deferring probe [ 1.258240] usbcore: registered new interface driver usbhid [ 1.263806] usbhid: USB HID core driver [ 1.269993] mvebu-audio f10b4000.audio-controller: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-audio1-i2s1-spdifo, deferring probe [ 1.284385] NET: Registered protocol family 17 [ 1.288955] ThumbEE CPU extension supported. [ 1.293243] Registering SWP/SWPB emulation handler [ 1.298018] PJ4 iWMMXt v2 coprocessor enabled. [ 1.304528] orion_spi f1010600.spi-ctrl: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-spi0, deferring probe [ 1.316691] sdhci-dove f1092000.sdio-host: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-sdio0, deferring probe [ 1.329048] mvebu-audio f10b4000.audio-controller: could not find pctldev for node /mbus/internal-regs/pin-ctrl@d0200/pmx-audio1-i2s1-spdifo, deferring probe [ 1.343563] rtc-mv f10d8500.real-time-clock: setting system clock to 2015-06-09 15:08:25 UTC (1433862505) [ 1.354268] ALSA device list: [ 1.357221] No soundcards found. [ 1.461943] ata1: SATA link down (SStatus 0 SControl F300) [ 1.467504] Waiting for root device /dev/mmcblk0p2... [ 3.241937] cfg80211: Calling CRDA to update world regulatory domain [ 6.401929] cfg80211: Calling CRDA to update world regulatory domain [ 9.561928] cfg80211: Calling CRDA to update world regulatory domain [ 12.721928] cfg80211: Calling CRDA to update world regulatory domain [ 15.881936] cfg80211: Calling CRDA to update world regulatory domain [ 19.041976] cfg80211: Calling CRDA to update world regulatory domain [ 22.201928] cfg80211: Calling CRDA to update world regulatory domain [ 25.361928] cfg80211: Calling CRDA to update world regulatory domain [ 28.521928] cfg80211: Calling CRDA to update world regulatory domain [ 31.681928] cfg80211: Calling CRDA to update world regulatory domain [ 34.841928] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

[PYBOOT] [cubox 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubox 01:47]: got exception: timeout ~$off

[PYBOOT] [cubox 01:48]: Done.

========================================================================

Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

################################################################# ################################################################# ################################################################# ################################################################# ############################### 3.5 MiB/s done Bytes transferred = 6173064 (5e3188 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x18000000 tmp/hummingboard-HKj7AG/imx6dl-hummingboard.dtb tftp 0x18000000 tmp/hummingboard-HKj7AG/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.130 Filename 'tmp/hummingboard-HKj7AG/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *### 3.2 MiB/s done Bytes transferred = 30390 (76b6 hex) C1 U-Boot > bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000

[PYBOOT] [hummingboard 00:35]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x5e3188 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a6b5

Starting kernel ...

[PYBOOT] [hummingboard 00:35]: u-boot: started kernel.

[PYBOOT] [hummingboard 01:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:11]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:13]: Done.

========================================================================

Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

################################################################# ################################################################# ################################################################# ################################################################# ############################ 3.9 MiB/s done Bytes transferred = 6129344 (5d86c0 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x18000000 tmp/hummingboard-FdlK_f/imx6dl-hummingboard.dtb tftp 0x18000000 tmp/hummingboard-FdlK_f/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.130 Filename 'tmp/hummingboard-FdlK_f/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *### 2.9 MiB/s done Bytes transferred = 30390 (76b6 hex) C1 U-Boot > bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000

[PYBOOT] [hummingboard 00:21]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x5d86c0 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a6b5

Starting kernel ... [PYBOOT] [hummingboard 00:21]: u-boot: started kernel.

[PYBOOT] [hummingboard 00:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 00:57]: got exception: timeout ~$off

[PYBOOT] [hummingboard 00:58]: Done.

========================================================================

Board jetsontk1-arm-multi_lpae_defconfig failure log: -------------------------------------------------

################################################################# ################################################################# ################################################################# ################################################################# ############################ 3.1 MiB/s done Bytes transferred = 6129344 (5d86c0 hex) Tegra124 (Jetson TK1) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra124 (Jetson TK1) # tftp 0x83000000 tmp/jetsontk1-MCDYEN/tegra124-jetson-tk1.dtb tftp 0x83000000 tmp/jetsontk1-MCDYEN/tegra124-jetson-tk1.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.95 Filename 'tmp/jetsontk1-MCDYEN/tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 2.6 MiB/s done Bytes transferred = 63791 (f92f hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000

[PYBOOT] [jetsontk1 00:24]: u-boot: jumping to kernel image bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x5d86c0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8ffed000, end 8ffff92e ... OK

Starting kernel ...

[PYBOOT] [jetsontk1 00:24]: u-boot: started kernel.

[PYBOOT] [jetsontk1 00:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [jetsontk1 01:00]: got exception: timeout ~$off

[PYBOOT] [jetsontk1 01:01]: Done.

========================================================================

Board jetsontk1-arm-multi_v7_defconfig failure log: -------------------------------------------------

################################################################# ################################################################# ################################################################# ################################################################# ############################ 2.8 MiB/s done Bytes transferred = 6129344 (5d86c0 hex) Tegra124 (Jetson TK1) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra124 (Jetson TK1) # tftp 0x83000000 tmp/jetsontk1-jRRIWz/tegra124-jetson-tk1.dtb tftp 0x83000000 tmp/jetsontk1-jRRIWz/tegra124-jetson-tk1.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.95 Filename 'tmp/jetsontk1-jRRIWz/tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 2.8 MiB/s done Bytes transferred = 63791 (f92f hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000

[PYBOOT] [jetsontk1 00:26]: u-boot: jumping to kernel image bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x5d86c0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8ffed000, end 8ffff92e ... OK

Starting kernel ...

[PYBOOT] [jetsontk1 00:26]: u-boot: started kernel.

[PYBOOT] [jetsontk1 01:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [jetsontk1 01:02]: got exception: timeout ~$off

[PYBOOT] [jetsontk1 01:03]: Done.

========================================================================

Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------

Connected to minnowmax console [channel connected] (~$quit to exit)~$open

~$hardreset

Command(minnowmax console)> open console already open

Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on

[PYBOOT] [minnowmax 00:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [minnowmax 00:41]: got exception: timeout ~$off

[PYBOOT] [minnowmax 00:42]: Done.

========================================================================

Board pandaes-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.080688] [<c028a204>] (__setup_irq) from [<c028a3c4>] (request_threaded_irq+0xc4/0x144) [ 2.089324] [<c028a3c4>] (request_threaded_irq) from [<c028c2dc>] (devm_request_threaded_irq+0x58/0x9c) [ 2.099121] [<c028c2dc>] (devm_request_threaded_irq) from [<c0839914>] (omap_hsmmc_probe+0x42c/0xa4c) [ 2.108764] [<c0839914>] (omap_hsmmc_probe) from [<c0629b7c>] (platform_drv_probe+0x44/0xa4) [ 2.117584] [<c0629b7c>] (platform_drv_probe) from [<c0628268>] (driver_probe_device+0x174/0x2b4) [ 2.126861] [<c0628268>] (driver_probe_device) from [<c0628434>] (__driver_attach+0x8c/0x90) [ 2.135681] [<c0628434>] (__driver_attach) from [<c06267e0>] (bus_for_each_dev+0x6c/0xa0) [ 2.144226] [<c06267e0>] (bus_for_each_dev) from [<c0627a7c>] (bus_add_driver+0x19c/0x214) [ 2.152832] [<c0627a7c>] (bus_add_driver) from [<c0628c48>] (driver_register+0x78/0xf8) [ 2.161193] [<c0628c48>] (driver_register) from [<c020abf0>] (do_one_initcall+0x8c/0x1d4) [ 2.169769] [<c020abf0>] (do_one_initcall) from [<c0d47dd4>] (kernel_init_freeable+0x150/0x1f0) [ 2.178863] [<c0d47dd4>] (kernel_init_freeable) from [<c097a10c>] (kernel_init+0x8/0xe8) [ 2.187316] [<c097a10c>] (kernel_init) from [<c0210928>] (ret_from_fork+0x14/0x2c) [ 2.195220] Code: bad PC value [ 2.198425] ---[ end trace d8d4829e485133b7 ]--- [ 2.203277] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.203277] [ 2.212829] CPU0: stopping [ 2.215667] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 4.1.0-rc7-next-20150609 #1 [ 2.224639] Hardware name: Generic OMAP4 (Flattened Device Tree) [ 2.230926] [<c0218394>] (unwind_backtrace) from [<c0213ce0>] (show_stack+0x10/0x14) [ 2.239044] [<c0213ce0>] (show_stack) from [<c097d770>] (dump_stack+0x8c/0x9c) [ 2.246582] [<c097d770>] (dump_stack) from [<c0216b60>] (handle_IPI+0x150/0x170) [ 2.254302] [<c0216b60>] (handle_IPI) from [<c020a72c>] (gic_handle_irq+0x64/0x68) [ 2.262207] [<c020a72c>] (gic_handle_irq) from [<c0214880>] (__irq_svc+0x40/0x54) [ 2.270019] Exception stack(0xc0e35f50 to 0xc0e35f98) [ 2.275299] 5f40: 00000001 00000000 00000000 c02224a0 [ 2.283813] 5f60: c0e364e4 00000000 00000000 c0e35fa0 c0e36548 c098c254 c0e34000 c0e36550 [ 2.292358] 5f80: 00000000 c0e35f98 c0211358 c021135c 60000113 ffffffff [ 2.299285] [<c0214880>] (__irq_svc) from [<c021135c>] (arch_cpu_idle+0x38/0x3c) [ 2.307006] [<c021135c>] (arch_cpu_idle) from [<c027cf84>] (cpu_startup_entry+0x1ec/0x248) [ 2.315643] [<c027cf84>] (cpu_startup_entry) from [<c0d47c78>] (start_kernel+0x3a8/0x3b4) [ 2.324188] [<c0d47c78>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.330993] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.330993]

[PYBOOT] [pandaes 00:50]: got exception: panic ~$off

[PYBOOT] [pandaes 00:51]: Done.

========================================================================

Board pandaes-arm-omap2plus_defconfig failure log: -------------------------------------------------

Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x82000000 tmp/pandaes-ZQUg5P/omap4-panda-es.dtb tftp 0x82000000 tmp/pandaes-ZQUg5P/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'tmp/pandaes-ZQUg5P/omap4-panda-es.dtb'. Load address: 0x82000000 Loading: *T #### done Bytes transferred = 57088 (df00 hex) Panda # bootm 0x81000000 - 0x82000000

[PYBOOT] [pandaes 00:39]: u-boot: jumping to kernel image bootm 0x81000000 - 0x82000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3490584 Bytes = 3.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Kernel Image ... OK OK Using Device Tree in place at 82000000, end 82010eff

Starting kernel ...

[PYBOOT] [pandaes 00:40]: u-boot: started kernel.

[PYBOOT] [pandaes 01:15]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pandaes 01:16]: got exception: timeout ~$off

[PYBOOT] [pandaes 01:17]: Done.

========================================================================

Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

################################################################# ################################################################# ################################################################# ################################################################# ############################### 6.4 MiB/s done Bytes transferred = 6173064 (5e3188 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x18000000 tmp/wandboard-nE_tzH/imx6q-wandboard.dtb tftp 0x18000000 tmp/wandboard-nE_tzH/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'tmp/wandboard-nE_tzH/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 4.9 MiB/s done Bytes transferred = 30792 (7848 hex) => bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000

[PYBOOT] [wandboard 00:24]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x5e3188 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a847

Starting kernel ...

[PYBOOT] [wandboard 00:24]: u-boot: started kernel.

[PYBOOT] [wandboard 00:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 01:00]: got exception: timeout ~$off

[PYBOOT] [wandboard 01:02]: Done.

========================================================================

Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

################################################################# ################################################################# ################################################################# ################################################################# ############################ 5.6 MiB/s done Bytes transferred = 6129344 (5d86c0 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x18000000 tmp/wandboard-h4vYW8/imx6q-wandboard.dtb tftp 0x18000000 tmp/wandboard-h4vYW8/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.178 Filename 'tmp/wandboard-h4vYW8/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 4.9 MiB/s done Bytes transferred = 30792 (7848 hex) => bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000

[PYBOOT] [wandboard 00:29]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x5d86c0 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a847

Starting kernel ...

[PYBOOT] [wandboard 00:29]: u-boot: started kernel.

[PYBOOT] [wandboard 01:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 01:05]: got exception: timeout ~$off

[PYBOOT] [wandboard 01:06]: Done.