Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160420/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:37.49 bbb arm-omap2plus_defconfig : FAILED 1:53.80 bbb arm-multi_v7_defconfig : FAILED 0:52.85 bbb arm-multi_v7_nosmp_defconfig : FAILED 0:37.68 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.27 beagleboard-x15 arm-multi_v7_defconfig : FAILED 0:24.95 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 0:34.68 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 0:36.76 beaver arm-tegra_defconfig : FAILED 1:45.88 beaver arm-multi_v7_defconfig : FAILED 1:56.69 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:51.69 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.86 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.33 cosmic arm-multi_v7_defconfig : FAILED 2:15.74 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:10.99 dalmore arm-tegra_defconfig : FAILED 1:56.07 dalmore arm-multi_v7_defconfig : FAILED 2:05.84 dalmore arm-multi_lpae_defconfig : FAILED 1:58.06 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.48 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:56.97 snow arm-multi_v7_nosmp_defconfig : FAILED 2:21.81 snowball arm-multi_v7_defconfig : FAILED 2:05.56 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:04.62

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:18.96 arndale arm-exynos_defconfig : passed 1:32.90 arndale arm-multi_v7_defconfig : passed 1:42.89 arndale arm-multi_lpae_defconfig : passed 1:25.19 capri arm-bcm_defconfig : passed 0:53.24 capri arm-multi_v7_defconfig : passed 0:52.92 capri arm-multi_v7_nosmp_defconfig : warnings 0:48.80 chitra powerpc-pasemi_defconfig : passed 1:55.38 chitra powerpc-ppc64_defconfig : passed 2:06.71 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:30.17 colibri-vf61 arm-multi_v7_defconfig : passed 1:22.72 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:19.46 colombus arm-sunxi_defconfig : passed 2:47.91 colombus arm-multi_v7_defconfig : passed 2:53.60 colombus arm-multi_lpae_defconfig : passed 2:34.55 cubie arm-sunxi_defconfig : passed 0:52.07 cubie arm-multi_v7_defconfig : passed 0:46.22 cubie arm-multi_v7_nosmp_defconfig : passed 1:11.71 cubie2 arm-sunxi_defconfig : passed 0:48.30 cubie2 arm-multi_v7_defconfig : passed 1:00.84 cubie2 arm-multi_lpae_defconfig : passed 1:00.32 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:09.80 cubox arm-multi_v7_defconfig : passed 1:39.90 cubox arm-mvebu_v7_defconfig : passed 1:08.68 cubox arm-multi_v7_nosmp_defconfig : passed 1:05.19 hummingboard arm-imx_v6_v7_defconfig : passed 1:40.70 hummingboard arm-multi_v7_defconfig : passed 1:31.10 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:07.14 jetsontk1 arm-tegra_defconfig : warnings 1:35.20 jetsontk1 arm-multi_v7_defconfig : warnings 1:37.64 jetsontk1 arm-multi_lpae_defconfig : warnings 1:44.68 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.32 pandaes arm-omap2plus_defconfig : warnings 1:36.24 pandaes arm-multi_v7_defconfig : passed 1:46.67 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:56.44 pi arm-exynos_defconfig : passed 2:16.23 pi arm-multi_v7_defconfig : passed 2:32.89 pi arm-multi_lpae_defconfig : passed 2:13.98 pi arm-multi_v7_nosmp_defconfig : warnings 3:19.15 pit arm-exynos_defconfig : passed 2:11.71 pit arm-multi_v7_defconfig : passed 2:16.54 pit arm-multi_lpae_defconfig : passed 2:27.15 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.21 seattle arm64-defconfig : passed 2:16.28 snow arm-exynos_defconfig : passed 2:23.55 snow arm-multi_v7_defconfig : passed 2:16.06 snow arm-multi_lpae_defconfig : passed 1:58.94 socfpga arm-socfpga_defconfig : warnings 1:21.07 socfpga arm-multi_v7_defconfig : warnings 1:17.82 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:16.14 trimslice arm-multi_v7_defconfig : warnings 1:42.93 wandboard arm-imx_v6_v7_defconfig : passed 1:24.89 wandboard arm-multi_v7_defconfig : passed 1:17.40 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:16.92

Offline boards:

omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.40 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:18.65 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:35.90 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:21.28 parallella arm-multi_v7_defconfig : OFFLINE 2:29.51 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:17.29 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.44 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:53.18 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:57.28 sama5 arm-sama5_defconfig : OFFLINE 2:26.65 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:29.99 seaboard arm-tegra_defconfig : OFFLINE 2:38.72 seaboard arm-multi_v7_defconfig : OFFLINE 2:25.47 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.31 snowball arm-u8500_defconfig : OFFLINE 1:53.78 trimslice arm-tegra_defconfig : OFFLINE 2:26.59 trimslice arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.57

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 2.109579] [c1038f20] *pgd=4100041e(bad) [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 2.125376] Modules linked in: [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fa450, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc4-next-20160420 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e8f0>] (unwind_backtrace) from [<c030b45c>] (show_stack+0x10/0x14) [ 0.000000] [<c030b45c>] (show_stack) from [<c0335e48>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335e48>] (__warn) from [<c0335e98>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e98>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x978) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0

[PYBOOT] [arndale 02:34]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:35]: got exception: timeout ~$off

[PYBOOT] [arndale 02:36]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.452695] Stack: (0xdb057dd0 to 0xdb058000) [ 1.457273] 7dc0: 00000001 c0a07238 db0efa10 db0efa10 [ 1.465863] 7de0: 00000000 db37ccc0 c13b1e34 db37caa8 c144ec50 db0efa10 00000000 00000000 [ 1.474452] 7e00: e083cd00 00000000 00000000 00000000 00000000 e083c800 e083ca00 00000000 [ 1.483040] 7e20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 4a102000 [ 1.491629] 7e40: 00000000 00000000 00000000 00000000 db0f0780 db0efa10 db0efa10 c13b1e48 [ 1.500218] 7e60: fffffdfb 00000000 00000000 00000000 00000000 c07826a0 c0782654 db0efa10 [ 1.508809] 7e80: c144bf3c c144bf44 c13b1e48 c0780dc0 00000000 db0efa10 c13b1e48 db0efa44 [ 1.517398] 7ea0: c13a3128 c140c000 0000011e c0780f18 00000000 c13b1e48 c0780e6c c077f11c [ 1.525989] 7ec0: db01f85c db0d7db4 c13b1e48 db4a3380 00000000 c07803b8 c0f886ec c11a5834 [ 1.534579] 7ee0: c13b1e48 c13b1e48 c1140704 c11a5834 c140c000 c0781754 c13b1e34 c120bebc [ 1.543168] 7f00: c1140704 c0301ea0 c0c07518 00000011 00000000 0000c000 cccccc00 c046605c [ 1.551759] 7f20: 00000000 c1336780 00000591 c102dca4 c0c1cbdc c035c468 cccccccd 00000000 [ 1.560347] 7f40: c0f9c908 00000000 00000006 00000006 c1336768 00000000 c120bebc 00000006 [ 1.568937] 7f60: c11a5834 c140c000 c140c000 0000011e c11a583c c1100db4 00000006 00000006 [ 1.577526] 7f80: 00000000 c11005a4 00000000 c0b6ea34 00000000 00000000 00000000 00000000 [ 1.586115] 7fa0: 00000000 c0b6ea3c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 1.594703] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.603293] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 793d25f2 71fc6d5a [ 1.611910] [<c08b99b8>] (cpsw_probe) from [<c07826a0>] (platform_drv_probe+0x4c/0xb0) [ 1.620231] [<c07826a0>] (platform_drv_probe) from [<c0780dc0>] (driver_probe_device+0x214/0x2c0) [ 1.629550] [<c0780dc0>] (driver_probe_device) from [<c0780f18>] (__driver_attach+0xac/0xb0) [ 1.638423] [<c0780f18>] (__driver_attach) from [<c077f11c>] (bus_for_each_dev+0x6c/0xa0) [ 1.647012] [<c077f11c>] (bus_for_each_dev) from [<c07803b8>] (bus_add_driver+0x1a0/0x218) [ 1.655692] [<c07803b8>] (bus_add_driver) from [<c0781754>] (driver_register+0x78/0xf8) [ 1.664103] [<c0781754>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 1.672705] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 1.681857] [<c1100db4>] (kernel_init_freeable) from [<c0b6ea3c>] (kernel_init+0x8/0x114) [ 1.690457] [<c0b6ea3c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 1.698410] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.704942] ---[ end trace dbcd93d743df5080 ]--- [ 1.709872] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.709872] [ 1.719471] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.719471]

[PYBOOT] [bbb 00:49]: got exception: panic ~$off

[PYBOOT] [bbb 00:50]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.222335] Stack: (0xdb057dd0 to 0xdb058000) [ 1.226908] 7dc0: 00000001 00000000 a0000013 db0dda10 [ 1.235494] 7de0: 00000000 c10a5864 db351a80 c113ae14 db351c80 db0dda10 0000a1ff 00000000 [ 1.244079] 7e00: e0832d00 00000000 00000000 00000000 00000000 e0832800 e0832a00 00000000 [ 1.252663] 7e20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 4a102000 [ 1.261248] 7e40: 00000000 00000000 00000000 00000000 db0deeb0 db0dda10 db0dda10 c10a5878 [ 1.269832] 7e60: fffffdfb 00000000 00000000 00000000 00000000 c0700b20 c0700ad4 db0dda10 [ 1.278418] 7e80: c11382e0 c11382e8 c10a5878 c06ff288 00000000 db0dda10 c10a5878 db0dda44 [ 1.287004] 7ea0: c1097868 c10fe000 000000fc c06ff3e0 00000000 c10a5878 c06ff334 c06fd724 [ 1.295589] 7ec0: db03410c db0cebb0 c10a5878 db40b380 00000000 c06fe880 c0decacc c0f8a830 [ 1.304176] 7ee0: c10a5878 c10a5878 c0f3883c c0f8a830 c10fe000 c06ffbdc c10a5864 c0fed9a8 [ 1.312763] 7f00: c0f3883c c0301c48 db004cc0 c112371c db032580 c0b06924 00000000 00000000 [ 1.321349] 7f20: 0000e000 c042cecc 000004e7 c0e88e00 c0b1bd9c c034cc64 00000000 00000000 [ 1.329934] 7f40: c0dfd8ec 00000000 00000006 00000006 00000000 00000000 c0fed9a8 00000006 [ 1.338520] 7f60: c0f8a830 c10fe000 c10fe000 000000fc c0f8a838 c0f00d84 00000006 00000006 [ 1.347105] 7f80: 00000000 c0f005a4 00000000 c0a91244 00000000 00000000 00000000 00000000 [ 1.355690] 7fa0: 00000000 c0a9124c 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 1.364274] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.372859] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 793d25f2 33f86d5a [ 1.381474] [<c08137d4>] (cpsw_probe) from [<c0700b20>] (platform_drv_probe+0x4c/0xb0) [ 1.389794] [<c0700b20>] (platform_drv_probe) from [<c06ff288>] (driver_probe_device+0x214/0x2c0) [ 1.399111] [<c06ff288>] (driver_probe_device) from [<c06ff3e0>] (__driver_attach+0xac/0xb0) [ 1.407971] [<c06ff3e0>] (__driver_attach) from [<c06fd724>] (bus_for_each_dev+0x6c/0xa0) [ 1.416557] [<c06fd724>] (bus_for_each_dev) from [<c06fe880>] (bus_add_driver+0x1a0/0x218) [ 1.425234] [<c06fe880>] (bus_add_driver) from [<c06ffbdc>] (driver_register+0x78/0xf8) [ 1.433641] [<c06ffbdc>] (driver_register) from [<c0301c48>] (do_one_initcall+0x40/0x170) [ 1.442237] [<c0301c48>] (do_one_initcall) from [<c0f00d84>] (kernel_init_freeable+0x138/0x1d8) [ 1.451377] [<c0f00d84>] (kernel_init_freeable) from [<c0a9124c>] (kernel_init+0x8/0x110) [ 1.459969] [<c0a9124c>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 1.467919] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.474393] ---[ end trace d83ef44a912d252c ]--- [ 1.479292] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.479292] [ 1.488880] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.488880]

[PYBOOT] [bbb 00:35]: got exception: panic ~$off

[PYBOOT] [bbb 00:37]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.070540] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.076656] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.082983] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.089857] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.099450] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.108949] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.115964] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.159271] ledtrig-cpu: registered to indicate activity on CPUs [ 2.168009] oprofile: using arm/armv7 [ 2.173014] Initializing XFRM netlink socket [ 2.178147] NET: Registered protocol family 10 [ 2.189087] sit: IPv6 over IPv4 tunneling driver [ 2.197995] NET: Registered protocol family 17 [ 2.202934] NET: Registered protocol family 15 [ 2.208168] Key type dns_resolver registered [ 2.213075] omap_voltage_late_init: Voltage driver support not added [ 2.219814] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.228281] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.238771] ThumbEE CPU extension supported. [ 2.243300] Registering SWP/SWPB emulation handler [ 2.248315] SmartReflex Class3 initialized [ 2.321459] mmc1: new high speed MMC card at address 0001 [ 2.333438] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.340887] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.349055] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.356139] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.368197] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.375669] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.386537] hctosys: unable to open rtc device (rtc0) [ 2.391983] sr_init: No PMIC hook to init smartreflex [ 2.397666] sr_init: platform driver register failed for SR [ 2.442554] mmcblk1: p1 p2 [ 2.460975] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.993872] df80: 00000000 c11005a4 00000000 c0b6ea34 00000000 00000000 00000000 00000000 [ 2.002416] dfa0: 00000000 c0b6ea3c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 2.010957] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.019502] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 2.028059] [<c08b99b8>] (cpsw_probe) from [<c07826a0>] (platform_drv_probe+0x4c/0xb0) [ 2.036334] [<c07826a0>] (platform_drv_probe) from [<c0780dc0>] (driver_probe_device+0x214/0x2c0) [ 2.045609] [<c0780dc0>] (driver_probe_device) from [<c0780f18>] (__driver_attach+0xac/0xb0) [ 2.054433] [<c0780f18>] (__driver_attach) from [<c077f11c>] (bus_for_each_dev+0x6c/0xa0) [ 2.062978] [<c077f11c>] (bus_for_each_dev) from [<c07803b8>] (bus_add_driver+0x1a0/0x218) [ 2.071607] [<c07803b8>] (bus_add_driver) from [<c0781754>] (driver_register+0x78/0xf8) [ 2.079981] [<c0781754>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 2.088528] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 2.097623] [<c1100db4>] (kernel_init_freeable) from [<c0b6ea3c>] (kernel_init+0x8/0x114) [ 2.106181] [<c0b6ea3c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.114090] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 2.120463] ---[ end trace 743b569952e63003 ]--- [ 2.125315] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.125315] [ 2.134866] CPU1: stopping [ 2.137702] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.6.0-rc4-next-20160420 #1 [ 2.146723] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.153114] [<c031046c>] (unwind_backtrace) from [<c030bb08>] (show_stack+0x10/0x14) [ 2.161229] [<c030bb08>] (show_stack) from [<c058d940>] (dump_stack+0x98/0xac) [ 2.168797] [<c058d940>] (dump_stack) from [<c030ec04>] (handle_IPI+0x16c/0x18c) [ 2.176544] [<c030ec04>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.184477] [<c03017ac>] (gic_handle_irq) from [<c030c694>] (__irq_svc+0x54/0x70) [ 2.192306] Exception stack(0xee0aff88 to 0xee0affd0) [ 2.197599] ff80: 00000001 00000000 00000000 c031b1c0 c13024a4 00000000 [ 2.206168] ffa0: 00000000 c1210600 c1302504 c130250c c140ada8 ee0ae000 2dd8f000 ee0affd8 [ 2.214726] ffc0: c030892c c0308930 60000013 ffffffff [ 2.220020] [<c030c694>] (__irq_svc) from [<c0308930>] (arch_cpu_idle+0x38/0x3c) [ 2.227773] [<c0308930>] (arch_cpu_idle) from [<c0378b98>] (cpu_startup_entry+0x1bc/0x220) [ 2.236434] [<c0378b98>] (cpu_startup_entry) from [<80301c6c>] (0x80301c6c) [ 2.243729] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.243729]

[PYBOOT] [beagleboard-x15 00:32]: got exception: panic ~$off

[PYBOOT] [beagleboard-x15 00:34]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.999962] df80: 00000000 c11005a4 00000000 c0b6ea34 00000000 00000000 00000000 00000000 [ 2.008501] dfa0: 00000000 c0b6ea3c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 2.017048] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.025597] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 2.034156] [<c08b99b8>] (cpsw_probe) from [<c07826a0>] (platform_drv_probe+0x4c/0xb0) [ 2.042442] [<c07826a0>] (platform_drv_probe) from [<c0780dc0>] (driver_probe_device+0x214/0x2c0) [ 2.051718] [<c0780dc0>] (driver_probe_device) from [<c0780f18>] (__driver_attach+0xac/0xb0) [ 2.060539] [<c0780f18>] (__driver_attach) from [<c077f11c>] (bus_for_each_dev+0x6c/0xa0) [ 2.069088] [<c077f11c>] (bus_for_each_dev) from [<c07803b8>] (bus_add_driver+0x1a0/0x218) [ 2.077727] [<c07803b8>] (bus_add_driver) from [<c0781754>] (driver_register+0x78/0xf8) [ 2.086093] [<c0781754>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 2.094645] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 2.103741] [<c1100db4>] (kernel_init_freeable) from [<c0b6ea3c>] (kernel_init+0x8/0x114) [ 2.112294] [<c0b6ea3c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.120196] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 2.126569] ---[ end trace 529f254835a09fe2 ]--- [ 2.131412] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.131412] [ 2.140955] CPU1: stopping [ 2.143788] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.6.0-rc4-next-20160420 #1 [ 2.152800] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.159189] [<c031046c>] (unwind_backtrace) from [<c030bb08>] (show_stack+0x10/0x14) [ 2.167302] [<c030bb08>] (show_stack) from [<c058d940>] (dump_stack+0x98/0xac) [ 2.174865] [<c058d940>] (dump_stack) from [<c030ec04>] (handle_IPI+0x16c/0x18c) [ 2.182607] [<c030ec04>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.190526] [<c03017ac>] (gic_handle_irq) from [<c030c694>] (__irq_svc+0x54/0x70) [ 2.198356] Exception stack(0xee0aff88 to 0xee0affd0) [ 2.203644] ff80: 00000001 00000000 00000000 c031b1c0 c13024a4 00000000 [ 2.212200] ffa0: 00000000 c1210600 c1302504 c130250c c140ada8 ee0ae000 2dd8f000 ee0affd8 [ 2.220756] ffc0: c030892c c0308930 60000013 ffffffff [ 2.226047] [<c030c694>] (__irq_svc) from [<c0308930>] (arch_cpu_idle+0x38/0x3c) [ 2.233790] [<c0308930>] (arch_cpu_idle) from [<c0378b98>] (cpu_startup_entry+0x1bc/0x220) [ 2.242443] [<c0378b98>] (cpu_startup_entry) from [<80301c6c>] (0x80301c6c) [ 2.249730] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.249730]

[PYBOOT] [beagleboard-x15 00:23]: got exception: panic ~$off

[PYBOOT] [beagleboard-x15 00:24]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.736928] Stack: (0xee07fdd0 to 0xee080000) [ 1.741473] fdc0: 00000002 00000000 a0000053 ee188410 [ 1.750022] fde0: 00000000 c10a5864 ee479280 c113ae14 ee479480 ee188410 0000a1ff 00000000 [ 1.758568] fe00: fa484d00 00000000 00000000 00000000 00000000 fa484800 fa484a00 00000000 [ 1.767118] fe20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 48486000 [ 1.775668] fe40: 00000000 00000000 00000000 00000000 ee189190 ee188410 ee188410 c10a5878 [ 1.784211] fe60: fffffdfb 00000000 00000000 00000000 00000000 c0700b20 c0700ad4 ee188410 [ 1.792759] fe80: c11382e0 c11382e8 c10a5878 c06ff288 00000000 ee188410 c10a5878 ee188444 [ 1.801305] fea0: c1097868 c10fe000 000000fc c06ff3e0 00000000 c10a5878 c06ff334 c06fd724 [ 1.809855] fec0: ee05934c ee184630 c10a5878 ee552e80 00000000 c06fe880 c0decacc c0f8a830 [ 1.818403] fee0: c10a5878 c10a5878 c0f3883c c0f8a830 c10fe000 c06ffbdc c10a5864 c0fed9a8 [ 1.826948] ff00: c0f3883c c0301c48 ee004f00 c112371c ee055e00 c0b06924 00000000 00000000 [ 1.835494] ff20: 0000e000 c042cecc 000004e7 c0e88e00 c0b1bd9c c034cc64 00000000 00000000 [ 1.844037] ff40: c0dfd8ec 00000000 00000006 00000006 00000000 00000000 c0fed9a8 00000006 [ 1.852580] ff60: c0f8a830 c10fe000 c10fe000 000000fc c0f8a838 c0f00d84 00000006 00000006 [ 1.861124] ff80: 00000000 c0f005a4 00000000 c0a91244 00000000 00000000 00000000 00000000 [ 1.869674] ffa0: 00000000 c0a9124c 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 1.878221] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.886760] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 1.895322] [<c08137d4>] (cpsw_probe) from [<c0700b20>] (platform_drv_probe+0x4c/0xb0) [ 1.903595] [<c0700b20>] (platform_drv_probe) from [<c06ff288>] (driver_probe_device+0x214/0x2c0) [ 1.912871] [<c06ff288>] (driver_probe_device) from [<c06ff3e0>] (__driver_attach+0xac/0xb0) [ 1.921696] [<c06ff3e0>] (__driver_attach) from [<c06fd724>] (bus_for_each_dev+0x6c/0xa0) [ 1.930246] [<c06fd724>] (bus_for_each_dev) from [<c06fe880>] (bus_add_driver+0x1a0/0x218) [ 1.938885] [<c06fe880>] (bus_add_driver) from [<c06ffbdc>] (driver_register+0x78/0xf8) [ 1.947249] [<c06ffbdc>] (driver_register) from [<c0301c48>] (do_one_initcall+0x40/0x170) [ 1.955803] [<c0301c48>] (do_one_initcall) from [<c0f00d84>] (kernel_init_freeable+0x138/0x1d8) [ 1.964906] [<c0f00d84>] (kernel_init_freeable) from [<c0a9124c>] (kernel_init+0x8/0x110) [ 1.973461] [<c0a9124c>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 1.981378] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.987752] ---[ end trace cb88537fdc8fa204 ]--- [ 1.992595] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.992595] [ 2.002137] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.002137]

[PYBOOT] [beagleboard-x15 00:34]: got exception: panic ~$off

[PYBOOT] [beagleboard-x15 00:35]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.707148] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.713464] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.720340] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.730736] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.735578] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.741886] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.748749] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.758316] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.767810] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.774866] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.819486] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.825780] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.832643] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.842225] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.851721] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.858756] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.864876] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.871180] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.878018] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.887604] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.897094] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.904139] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.949732] hctosys: unable to open rtc device (rtc0) [ 2.955027] sr_init: No PMIC hook to init smartreflex [ 2.960553] sr_init: platform driver register failed for SR [ 3.001243] mmc1: new high speed MMC card at address 0001 [ 3.007759] aic_dvdd_fixed: disabling [ 3.009257] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 3.010041] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.010782] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.029352] ldousb: disabling [ 3.030413] mmcblk1: p1 [ 3.038145] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.465049] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.471568] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.478440] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.484022] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.491123] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.501120] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.513051] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.519665] [drm] No driver support for vblank timestamp query. [ 3.525602] drm drm: No connectors reported connected with modes [ 3.531607] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.558182] Console: switching to colour frame buffer device 128x48 [ 3.570252] drm drm: fb0: frame buffer device [ 3.588796] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.599639] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.606101] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.611513] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.619345] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.633809] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.641067] hub 1-0:1.0: USB hub found [ 3.644840] hub 1-0:1.0: 1 port detected [ 3.649807] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.655218] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.662952] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.678798] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.685954] hub 2-0:1.0: USB hub found [ 3.689720] hub 2-0:1.0: 1 port detected [ 3.698464] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.712171] vdd_sata,avdd_plle: disabling [ 3.716988] usb1_vbus: disabling [ 3.721088] Waiting for root device /dev/mmcblk0p1... [ 3.998806] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.944447] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 69.508804] random: nonblocking pool is initialized

[PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:54]: got exception: timeout ~$off

[PYBOOT] [beaver 01:55]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.367450] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.374402] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.380918] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.387749] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.393331] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.399945] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.409938] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.420294] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.426909] [drm] No driver support for vblank timestamp query. [ 3.432843] drm drm: No connectors reported connected with modes [ 3.438851] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.458198] Console: switching to colour frame buffer device 128x48 [ 3.469964] drm drm: fb0: frame buffer device [ 3.474401] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.484262] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.490711] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.496117] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.503841] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.517853] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.524225] hub 1-0:1.0: USB hub found [ 3.527995] hub 1-0:1.0: 1 port detected [ 3.532623] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.538029] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.545693] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.557849] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.564160] hub 2-0:1.0: USB hub found [ 3.567917] hub 2-0:1.0: 1 port detected [ 3.575393] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.588559] vdd_sata,avdd_plle: disabling [ 3.592950] usb1_vbus: disabling [ 3.596841] Waiting for root device /dev/mmcblk0p1... [ 3.877854] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.816384] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:49]: got exception: timeout ~$off

[PYBOOT] [beaver 01:51]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.694202] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.701162] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.706768] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.714300] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.724302] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.737229] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.743859] [drm] No driver support for vblank timestamp query. [ 3.749855] drm drm: No connectors reported connected with modes [ 3.755870] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.781987] Console: switching to colour frame buffer device 128x48 [ 3.793816] drm drm: fb0: frame buffer device [ 3.820774] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.830029] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.836508] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.841940] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.849914] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.870781] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.878505] hub 1-0:1.0: USB hub found [ 3.882290] hub 1-0:1.0: 1 port detected [ 3.887098] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.892524] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.900396] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.920778] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.928361] hub 2-0:1.0: USB hub found [ 3.932136] hub 2-0:1.0: 1 port detected [ 3.940445] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.959116] vdd_sata,avdd_plle: disabling [ 3.963536] usb1_vbus: disabling [ 3.966949] ALSA device list: [ 3.969906] #0: NVIDIA Tegra Beaver [ 3.974152] Waiting for root device /dev/mmcblk0p1... [ 4.250782] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.236307] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:44]: got exception: timeout ~$off

[PYBOOT] [beaver 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.948997] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.963391] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.535689] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.963041] eth0: device MAC address a2:1a:fe:d0:aa:46 [ 90.117875] RX IPC Checksum Offload disabled [ 90.122503] No MAC Management Counters available [ 90.128288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/a2:1a:fe:d0:aa:46 Sending on LPF/eth0/a2:1a:fe:d0:aa:46 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.479134] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.553365] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.563695] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.637930] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.648254] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.722490] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.732819] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.807050] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.817372] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.891610] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.901935] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.976177] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.986512] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.060710] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.071029] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.145259] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.155581] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.229759] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.240107] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.314336] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.324662] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.398835] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.409154] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.483367] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.493691] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.567923] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.578246] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.652475] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.662799] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.737037] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.747361] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.821590] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.831915] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.071223] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.145202] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.155282] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.229260] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.239334] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.313311] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.323386] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.397371] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.407455] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.481441] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.491524] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.565503] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.575570] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.649634] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.659704] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.733685] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.743759] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.817744] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.827818] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.901797] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.911868] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.985848] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.995920] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.069901] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.079980] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.153959] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.164032] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.238010] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.248092] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.322077] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.332162] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.406142] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.416221] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:11]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:12]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.847937] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.921847] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.931900] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.005807] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.015866] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.089774] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.099830] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.173738] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.183795] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.257704] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.267769] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.341675] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.351732] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.425641] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.435707] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.509617] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.519679] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.593589] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.603638] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.677543] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.687593] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.761494] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.771550] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.845449] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.855513] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.929420] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.939471] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.013378] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.023436] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.097346] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.107399] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.181304] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.191365] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:09]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:10]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.796536] can: netlink gateway (rev 20130117) max_hops=1 [ 2.803511] Key type dns_resolver registered [ 2.809888] ThumbEE CPU extension supported. [ 2.814279] Registering SWP/SWPB emulation handler [ 2.829357] usb1_vbus: supplied by vdd-sys-5v0 [ 2.837400] usb2_vbus: supplied by vdd-sys-5v0 [ 2.856003] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.878702] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.885447] [drm] No driver support for vblank timestamp query. [ 2.902858] mmc1: new high speed MMC card at address 0001 [ 2.912984] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.921348] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.931203] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.940772] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.952654] mmcblk1: p1 [ 3.067350] Console: switching to colour frame buffer device 240x75 [ 3.154752] drm drm: fb0: frame buffer device [ 3.172060] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.186184] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.191834] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.201911] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.217007] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.227404] hub 1-0:1.0: USB hub found [ 3.231440] hub 1-0:1.0: 1 port detected [ 3.241353] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.254956] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.317411] dvdd_ts: disabling [ 3.320512] usb1_vbus: disabling [ 3.323874] vdd_cam_1v8_reg: disabling [ 3.331167] Waiting for root device /dev/mmcblk0p1... [ 3.542002] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.525453] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 48.808350] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:56]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:57]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.796727] can: netlink gateway (rev 20130117) max_hops=1 [ 2.803722] Key type dns_resolver registered [ 2.810094] ThumbEE CPU extension supported. [ 2.814486] Registering SWP/SWPB emulation handler [ 2.832419] usb1_vbus: supplied by vdd-sys-5v0 [ 2.841384] usb2_vbus: supplied by vdd-sys-5v0 [ 2.860345] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.883047] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.889798] [drm] No driver support for vblank timestamp query. [ 2.900147] mmc1: new high speed MMC card at address 0001 [ 2.910106] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.918843] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.926061] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.935468] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.946379] mmcblk1: p1 [ 3.069026] Console: switching to colour frame buffer device 240x75 [ 3.156447] drm drm: fb0: frame buffer device [ 3.172155] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.186950] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.192614] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.201354] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.217184] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.227721] hub 1-0:1.0: USB hub found [ 3.231720] hub 1-0:1.0: 1 port detected [ 3.241535] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.255158] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.317474] dvdd_ts: disabling [ 3.320583] usb1_vbus: disabling [ 3.323990] vdd_cam_1v8_reg: disabling [ 3.331322] Waiting for root device /dev/mmcblk0p1... [ 3.542205] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.525041] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.493197] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:03]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:04]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.317655] can: raw protocol (rev 20120528) [ 2.321973] can: broadcast manager protocol (rev 20120528 t) [ 2.327693] can: netlink gateway (rev 20130117) max_hops=1 [ 2.334232] Key type dns_resolver registered [ 2.339225] ThumbEE CPU extension supported. [ 2.361448] usb1_vbus: supplied by vdd-sys-5v0 [ 2.369723] usb2_vbus: supplied by vdd-sys-5v0 [ 2.384051] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.408678] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.415362] [drm] No driver support for vblank timestamp query. [ 2.580516] Console: switching to colour frame buffer device 240x75 [ 2.668125] drm drm: fb0: frame buffer device [ 2.672733] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.683556] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.689105] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.697300] mmc1: new high speed MMC card at address 0001 [ 2.703932] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.710219] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.715241] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.721362] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.729870] hub 1-0:1.0: USB hub found [ 2.733859] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.740061] hub 1-0:1.0: 1 port detected [ 2.744363] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.754256] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.762356] mmcblk1: p1 [ 2.770402] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.810144] dvdd_ts: disabling [ 2.813297] usb1_vbus: disabling [ 2.816615] vdd_cam_1v8_reg: disabling [ 2.821957] Waiting for root device /dev/mmcblk0p1... [ 3.061329] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.015698] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.927471] Bluetooth: RFCOMM socket layer initialized [ 2.932698] Bluetooth: RFCOMM ver 1.11 [ 2.936608] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.942005] Bluetooth: BNEP socket layer initialized [ 2.947064] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.953062] Bluetooth: HIDP socket layer initialized [ 2.959968] Key type dns_resolver registered [ 2.969430] Registering SWP/SWPB emulation handler [ 2.989470] usb1_vbus: supplied by vdd-sys-5v0 [ 2.998843] usb2_vbus: supplied by vdd-sys-5v0 [ 3.016703] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.045925] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.052708] [drm] No driver support for vblank timestamp query. [ 3.230569] Console: switching to colour frame buffer device 240x75 [ 3.317318] drm drm: fb0: frame buffer device [ 3.346629] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.355677] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.361532] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.370704] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.396638] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.410713] hub 1-0:1.0: USB hub found [ 3.414672] hub 1-0:1.0: 1 port detected [ 3.428752] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.442916] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.530168] dvdd_ts: disabling [ 3.533321] usb1_vbus: disabling [ 3.536704] vdd_cam_1v8_reg: disabling [ 3.541288] ALSA device list: [ 3.544278] #0: NVIDIA Tegra Dalmore [ 3.550115] Waiting for root device /dev/mmcblk0p1... [ 3.736625] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.771164] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.126600] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:55]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.702921] sit: IPv6 over IPv4 tunneling driver [ 1.706231] NET: Registered protocol family 17 [ 1.710209] NET: Registered protocol family 15 [ 1.714676] Key type dns_resolver registered [ 1.719006] Registering SWP/SWPB emulation handler [ 1.734246] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.736583] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.743993] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.751111] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.757692] [drm] No driver support for vblank timestamp query. [ 1.763608] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.769951] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.775004] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.782780] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.789767] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.798347] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.808156] mmc1: new DDR MMC card at address 0001 [ 1.811779] max98090 1-0010: MAX98090 REVID=0x43 [ 1.814055] max98090 1-0010: use default 2.8v micbias [ 1.823314] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.827056] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.833248] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.835190] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.845554] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.851581] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.858285] mmcblk1: p1 p2 [ 1.885032] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.905636] VDD10_HDMI_1.0V: disabling [ 1.906353] vdd_g3d: disabling [ 1.907417] BUCK8_2.8V: disabling [ 1.911412] ALSA device list: [ 1.913030] #0: Odroid-U3 [ 1.916830] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:54]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:55]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

root@snow:~# ip -f inet -o addr ip -f inet -o addr 1: lo inet 127.0.0.1/8 scope host lo\ valid_lft forever preferred_lft forever root@snow:~# dmesg -l err | awk '{ print "[ERR] " $0 }' dmesg -l err | awk '{ print "[ERR] " $0 }'[ 9.341847] Unable to handle kernel paging request at virtual address ed311a80 [ 9.347594] pgd = c0204000 [ 9.350285] [ed311a80] *pgd=6d20041e(bad) [ 9.354281] Internal error: Oops: 8000000d [#1] ARM [ 9.359138] Modules linked in: [ 9.362182] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc4-next-20160420 #1 [ 9.370595] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 9.376672] task: c1005f70 ti: c1000000 task.ti: c1000000 [ 9.382055] PC is at 0xed311a80 [ 9.385187] LR is at cpu_init+0x14/0x54 [ 9.389001] pc : [<ed311a80>] lr : [<c0309f60>] psr: 000001d3 [ 9.389001] sp : c1001f50 ip : 00000000 fp : 00000000 [ 9.400455] r10: c1035b58 r9 : c1005f70 r8 : 2673909d [ 9.405663] r7 : 00000001 r6 : c10b2238 r5 : ed311c40 r4 : c1134b84 [ 9.412174] r3 : c030d7e0 r2 : 00cf99f4 r1 : 6e07c059 r0 : 00000000 [ 9.418685] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 9.425975] Control: 10c53c7d Table: 6e07c059 DAC: 00000051 [ 9.431704] Process swapper (pid: 0, stack limit = 0xc1000218) [ 9.437519] Stack: (0xc1001f50 to 0xc1002000) [ 9.441863] 1f40: c10fc0d5 c034e014 00000000 c10b16e0 [ 9.450023] 1f60: c1001f94 c030c550 c10377c0 e7ec13c9 00000001 c10fc0d5 c10fc0d5 c1000000 [ 9.458182] 1f80: c100212c c10b16d8 c1002134 c10fc0d5 c1001fa4 c0a92a00 c1035fc8 c1000000 [ 9.466341] 1fa0: c1001fac c0a92c00 c10b2198 c0357de0 00000001 ffffffff 00000000 c0f00c40 [ 9.474500] 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8aa20 c10fe1d4 c10020b4 [ 9.482659] 1fe0: c0f8aa1c c1007138 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 9.490833] [<c0309f60>] (cpu_init) from [<c034e014>] (atomic_notifier_call_chain+0x18/0x20) [ 9.499245] [<c034e014>] (atomic_notifier_call_chain) from [<c030c550>] (__switch_to+0x34/0x64) [ 9.507921] Code: 00000000 00000000 00000000 00000000 (ed403b00) [ 9.513994] ---[ end trace cb88537fdc8fa202 ]--- [ 9.518592] Kernel panic - not syncing: Attempted to kill the idle task! [ 9.525277] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [snow 02:20]: got exception: ERROR: Timeout waiting for command: dmesg -l err | awk '{ print "[ERR] " $0 }'. ~$off

[PYBOOT] [snow 02:21]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.931579] ledtrig-cpu: registered to indicate activity on CPUs [ 1.938598] usbcore: registered new interface driver usbhid [ 1.944213] usbhid: USB HID core driver [ 1.958831] NET: Registered protocol family 10 [ 1.964935] sit: IPv6 over IPv4 tunneling driver [ 1.970794] NET: Registered protocol family 17 [ 1.975311] can: controller area network core (rev 20120528 abi 9) [ 1.981628] NET: Registered protocol family 29 [ 1.986083] can: raw protocol (rev 20120528) [ 1.990386] can: broadcast manager protocol (rev 20120528 t) [ 1.996093] can: netlink gateway (rev 20130117) max_hops=1 [ 2.002441] Key type dns_resolver registered [ 2.007049] ThumbEE CPU extension supported. [ 2.011383] Registering SWP/SWPB emulation handler [ 2.023773] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.030914] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.040466] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.047515] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.054534] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.061553] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.079071] db8500-esram12: disabling [ 2.082885] db8500-esram34: disabling [ 2.087005] V-CSI/DSI: disabling [ 2.090393] mmci-reg: disabling [ 2.095458] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.101470] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.110168] Waiting for root device /dev/mmcblk0p4... [ 2.143463] mmc3: new high speed MMC card at address 0001 [ 2.149780] mmcblk3: mmc3:0001 3.53 GiB [ 2.154235] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.160003] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.165863] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.172821] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:03]: got exception: timeout ~$off

[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.877868] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.885345] ledtrig-cpu: registered to indicate activity on CPUs [ 1.891693] usbcore: registered new interface driver usbhid [ 1.897247] usbhid: USB HID core driver [ 1.904449] NET: Registered protocol family 10 [ 1.959747] sit: IPv6 over IPv4 tunneling driver [ 1.964904] NET: Registered protocol family 17 [ 1.969360] can: controller area network core (rev 20120528 abi 9) [ 1.975585] NET: Registered protocol family 29 [ 1.980041] can: raw protocol (rev 20120528) [ 1.984313] can: broadcast manager protocol (rev 20120528 t) [ 1.989959] can: netlink gateway (rev 20130117) max_hops=1 [ 1.995849] Key type dns_resolver registered [ 2.000274] ThumbEE CPU extension supported. [ 2.054473] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.069152] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.078216] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.085235] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.092193] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.099182] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.111145] db8500-esram12: disabling [ 2.158935] db8500-esram34: disabling [ 2.182678] V-CSI/DSI: disabling [ 2.193908] mmci-reg: disabling [ 2.197479] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.203430] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.219635] Waiting for root device /dev/mmcblk0p4... [ 3.017669] mmc3: new high speed MMC card at address 0001 [ 3.029510] mmcblk3: mmc3:0001 3.53 GiB [ 3.043670] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.049163] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.063690] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.075531] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:02]: got exception: timeout ~$off

[PYBOOT] [snowball 02:04]: Done.