Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-258-g60e3830/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.96 beaver arm-multi_v7_defconfig : FAILED 1:57.50 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.52 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.43 omap5uevm arm-multi_v7_defconfig : FAILED 2:05.27 omap5uevm arm-multi_lpae_defconfig : FAILED 2:15.62 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:52.68 pi arm-multi_v7_defconfig : FAILED 2:01.02 pi arm-multi_lpae_defconfig : FAILED 1:59.55 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:18.45 arndale arm-exynos_defconfig : passed 1:35.18 arndale arm-multi_v7_defconfig : passed 1:33.75 arndale arm-multi_lpae_defconfig : passed 1:26.87 bbb arm-omap2plus_defconfig : passed 1:40.66 bbb arm-multi_v7_defconfig : passed 1:20.90 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:50.62 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:49.73 beagleboard-x15 arm-multi_lpae_defconfig : warnings 1:02.05 capri arm-bcm_defconfig : passed 0:53.30 capri arm-multi_v7_defconfig : passed 0:54.19 chitra powerpc-ppc64_defconfig : passed 2:13.52 colombus arm-sunxi_defconfig : passed 2:28.96 colombus arm-multi_v7_defconfig : passed 2:36.03 colombus arm-multi_lpae_defconfig : passed 2:35.53 cosmic arm-imx_v6_v7_defconfig : passed 3:19.82 cosmic arm-multi_v7_defconfig : passed 2:54.62 cubie arm-sunxi_defconfig : passed 0:51.21 cubie arm-multi_v7_defconfig : passed 0:50.95 cubie2 arm-sunxi_defconfig : passed 1:05.73 cubie2 arm-multi_v7_defconfig : passed 0:57.22 cubie2 arm-multi_lpae_defconfig : passed 0:55.03 cubox arm-multi_v7_defconfig : passed 1:23.21 cubox arm-mvebu_v7_defconfig : passed 1:07.86 dalmore arm-tegra_defconfig : warnings 1:26.94 dalmore arm-multi_v7_defconfig : warnings 1:25.78 dalmore arm-multi_lpae_defconfig : warnings 1:28.15 jetsontk1 arm-tegra_defconfig : warnings 0:54.29 jetsontk1 arm-multi_v7_defconfig : warnings 0:52.98 jetsontk1 arm-multi_lpae_defconfig : warnings 0:50.88 pandaes arm-omap2plus_defconfig : warnings 1:30.82 pandaes arm-multi_v7_defconfig : passed 1:50.08 parallella arm-multi_v7_defconfig : passed 2:39.95 pit arm-exynos_defconfig : passed 2:12.74 pit arm-multi_v7_defconfig : passed 2:17.43 pit arm-multi_lpae_defconfig : passed 2:15.27 seaboard arm-tegra_defconfig : warnings 0:59.02 seaboard arm-multi_v7_defconfig : warnings 1:02.42 seattle arm64-defconfig : passed 2:17.78 snow arm-exynos_defconfig : passed 2:06.81 snow arm-multi_v7_defconfig : passed 2:04.72 snow arm-multi_lpae_defconfig : passed 2:31.93 snowball arm-u8500_defconfig : passed 2:33.01 snowball arm-multi_v7_defconfig : passed 2:42.52 trimslice arm-tegra_defconfig : warnings 1:36.10 trimslice arm-multi_v7_defconfig : warnings 1:45.71 wandboard arm-imx_v6_v7_defconfig : passed 1:30.92 wandboard arm-multi_v7_defconfig : passed 1:05.32

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.81 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:18.06 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:16.29 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.39 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.38 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:41.06 sama5 arm-sama5_defconfig : OFFLINE 2:22.07 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:23.85 socfpga arm-socfpga_defconfig : OFFLINE 2:16.71 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.14

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.410062] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.416583] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.423537] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.429123] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.436123] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.446120] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.456946] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.463583] [drm] No driver support for vblank timestamp query. [ 3.469525] drm drm: No connectors reported connected with modes [ 3.475533] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.500805] Console: switching to colour frame buffer device 128x48 [ 3.512614] drm drm: fb0: frame buffer device [ 3.528696] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.539534] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.545996] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.551407] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.559256] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.573709] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.580486] hub 1-0:1.0: USB hub found [ 3.584256] hub 1-0:1.0: 1 port detected [ 3.589208] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.594620] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.602356] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.613700] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.620371] hub 2-0:1.0: USB hub found [ 3.624151] hub 2-0:1.0: 1 port detected [ 3.634210] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.647842] vdd_sata,avdd_plle: disabling [ 3.652584] usb1_vbus: disabling [ 3.656664] Waiting for root device /dev/mmcblk0p1... [ 3.933704] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.875582] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 77.498703] random: nonblocking pool is initialized

[PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:54]: got exception: timeout ~$off

[PYBOOT] [beaver 01:55]: Done.

========================================================================

Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 6.504216] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.511257] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.516858] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.524388] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.534387] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.546974] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.553617] [drm] No driver support for vblank timestamp query. [ 6.559618] drm drm: No connectors reported connected with modes [ 6.565644] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.591206] Console: switching to colour frame buffer device 128x48 [ 6.603013] drm drm: fb0: frame buffer device [ 6.630813] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.640113] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.646590] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.652021] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.659995] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.680814] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.688424] hub 1-0:1.0: USB hub found [ 6.692218] hub 1-0:1.0: 1 port detected [ 6.697025] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.702467] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.710342] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.730808] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.738286] hub 2-0:1.0: USB hub found [ 6.742072] hub 2-0:1.0: 1 port detected [ 6.750251] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.768499] vdd_sata,avdd_plle: disabling [ 6.773001] usb1_vbus: disabling [ 6.776406] ALSA device list: [ 6.779363] #0: NVIDIA Tegra Beaver [ 6.783603] Waiting for root device /dev/mmcblk0p1... [ 7.060820] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.046116] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:47]: got exception: timeout ~$off

[PYBOOT] [beaver 01:48]: Done.

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.791149] NET: Registered protocol family 10 [ 1.796806] sit: IPv6 over IPv4 tunneling driver [ 1.797274] NET: Registered protocol family 17 [ 1.800212] NET: Registered protocol family 15 [ 1.804704] Key type dns_resolver registered [ 1.809025] Registering SWP/SWPB emulation handler [ 1.817018] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.821596] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.828990] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.836146] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.842734] [drm] No driver support for vblank timestamp query. [ 1.848642] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.855024] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.860193] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.867382] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.876149] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.885889] mmc1: new DDR MMC card at address 0001 [ 1.890879] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.895103] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.900935] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.906655] max98090 1-0010: MAX98090 REVID=0x43 [ 1.911414] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.917914] mmcblk1: p1 p2 [ 1.920580] max98090 1-0010: use default 2.8v micbias [ 1.930953] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.934105] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.971627] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.987114] VDD10_HDMI_1.0V: disabling [ 1.987792] vdd_g3d: disabling [ 1.988864] BUCK8_2.8V: disabling [ 1.992802] ALSA device list: [ 1.994504] #0: Odroid-U3 [ 1.998119] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:49]: Done.

========================================================================

Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.938171] mmc0: new high speed MMC card at address 0001 [ 1.948906] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953873] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960403] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.969229] smsc95xx v1.0.4 [ 1.973280] smps9: Bringing 0uV into 2100000-2100000uV [ 1.981407] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.987928] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.995946] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.007086] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.015226] ldo9: bypassed regulator has no supply! [ 2.020341] ldo9: failed to get the current voltage(-517) [ 2.022998] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, d2:c1:01:fc:42:12 [ 2.037669] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.052988] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.079252] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.085646] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112181] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130879] ldo9: bypassed regulator has no supply! [ 2.135999] ldo9: failed to get the current voltage(-517) [ 2.141662] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156236] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:31 UTC (946684951) [ 2.172106] pbias_mmc_omap5: disabling [ 2.176045] vmmcsdio_fixed: disabling [ 2.180587] Waiting for root device /dev/mmcblk1p2... [ 2.248498] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.384295] hub 1-2:1.0: USB hub found [ 2.388307] hub 1-2:1.0: 3 ports detected [ 2.394069] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.422228] smps9: Bringing 0uV into 2100000-2100000uV [ 2.440908] ldo9: bypassed regulator has no supply! [ 2.446024] ldo9: failed to get the current voltage(-517) [ 2.451691] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:13]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:14]: Done.

========================================================================

Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.944213] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.950561] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959742] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.969996] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978168] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984701] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992700] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.003813] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.011970] ldo9: bypassed regulator has no supply! [ 2.017090] ldo9: failed to get the current voltage(-517) [ 2.022758] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.025208] smsc95xx v1.0.4 [ 2.040994] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064259] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070666] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.082827] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ba:cb:c0:d1:8a:d7 [ 2.107523] smps9: Bringing 0uV into 2100000-2100000uV [ 2.126370] ldo9: bypassed regulator has no supply! [ 2.131489] ldo9: failed to get the current voltage(-517) [ 2.137155] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151242] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.174607] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.190455] pbias_mmc_omap5: disabling [ 2.194406] vmmcsdio_fixed: disabling [ 2.198978] Waiting for root device /dev/mmcblk1p2... [ 2.338511] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.474381] hub 1-2:1.0: USB hub found [ 2.478396] hub 1-2:1.0: 3 ports detected [ 2.492718] smps9: Bringing 0uV into 2100000-2100000uV [ 2.511673] ldo9: bypassed regulator has no supply! [ 2.516798] ldo9: failed to get the current voltage(-517) [ 2.522470] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.536616] omap-dwc3 4a020000.omap_dwc3: vbus init failed

[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:04]: Done.

========================================================================

Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 3.904901] ldo9: bypassed regulator has no supply! [ 3.910027] ldo9: failed to get the current voltage(-517) [ 3.915692] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.938588] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.946114] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.952709] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.959022] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.965860] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.975466] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.984953] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.992011] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.998143] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.004439] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.011298] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.020889] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.030382] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.037404] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.078588] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.084881] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.091748] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.101331] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.110820] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.117851] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.138155] smps9: Bringing 0uV into 2100000-2100000uV [ 4.166307] ldo9: bypassed regulator has no supply! [ 4.171437] ldo9: failed to get the current voltage(-517) [ 4.177102] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.197197] hctosys: unable to open rtc device (rtc0) [ 4.202518] sr_init: No PMIC hook to init smartreflex [ 4.208019] sr_init: platform driver register failed for SR [ 4.235543] pbias_mmc_omap5: disabling [ 4.239505] vmmcsdio_fixed: disabling [ 4.245656] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:05]: Done.

========================================================================

Board pi-arm-exynos_defconfig failure log: -------------------------------------------------

[ 20.957753] BUG: spinlock lockup suspected on CPU#0, kworker/u16:1/80 [ 20.962711] lock: 0xee73f000, .magic: dead4ead, .owner: kworker/u16:1/80, .owner_cpu: 0 [ 20.970777] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc2-00258-g60e3830 #1 [ 20.979885] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 20.985968] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 20.993682] [<c010ad18>] (show_stack) from [<c03269d8>] (dump_stack+0x78/0x8c) [ 21.000884] [<c03269d8>] (dump_stack) from [<c015994c>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.008690] [<c015994c>] (do_raw_spin_lock) from [<c06d2348>] (__schedule+0x84/0x4b8) [ 21.016497] [<c06d2348>] (__schedule) from [<c06d27c8>] (schedule+0x4c/0xac) [ 21.023523] [<c06d27c8>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.030463] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.036973] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.044866] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.053279] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.060825] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null)) [ 21.067243] Sending NMI to all CPUs: [ 21.070799] NMI backtrace for cpu 0 [ 21.074270] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc2-00258-g60e3830 #1 [ 21.083377] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.089457] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.097174] [<c010ad18>] (show_stack) from [<c03269d8>] (dump_stack+0x78/0x8c) [ 21.104376] [<c03269d8>] (dump_stack) from [<c032a338>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.112181] [<c032a338>] (nmi_cpu_backtrace) from [<c010c934>] (raise_nmi+0x60/0x64) [ 21.119902] [<c010c934>] (raise_nmi) from [<c032a2b8>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.128837] [<c032a2b8>] (nmi_trigger_all_cpu_backtrace) from [<c0159954>] (do_raw_spin_lock+0x104/0x1d8) [ 21.138380] [<c0159954>] (do_raw_spin_lock) from [<c06d2348>] (__schedule+0x84/0x4b8) [ 21.146188] [<c06d2348>] (__schedule) from [<c06d27c8>] (schedule+0x4c/0xac) [ 21.153214] [<c06d27c8>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.160154] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.166661] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.174555] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.182970] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.190515] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null))

[PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:51]: got exception: timeout ~$off

[PYBOOT] [pi 01:52]: Done.

========================================================================

Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.533430] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539782] isl29018 7-0044: Failed to read 1: -6 [ 1.544367] isl29018 7-0044: regmap initialization fails: -6 [ 1.555275] NET: Registered protocol family 10 [ 1.559712] sit: IPv6 over IPv4 tunneling driver [ 1.563286] NET: Registered protocol family 17 [ 1.567290] can: controller area network core (rev 20120528 abi 9) [ 1.573481] NET: Registered protocol family 29 [ 1.577869] can: raw protocol (rev 20120528) [ 1.582118] can: broadcast manager protocol (rev 20120528 t) [ 1.587760] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593486] Key type dns_resolver registered [ 1.597808] ThumbEE CPU extension supported. [ 1.601729] Registering SWP/SWPB emulation handler [ 1.611647] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617125] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623491] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628866] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638970] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649310] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654758] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664945] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671125] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676503] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686244] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708733] Waiting for root device /dev/mmcblk0p1... [ 1.712617] mmc0: tuning execution failed: -5 [ 1.716672] mmc0: error -5 whilst initialising MMC card [ 2.583233] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597393] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602854] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609226] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614610] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:57]: got exception: timeout ~$off

[PYBOOT] [pi 01:58]: Done.

========================================================================

Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.533365] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539718] isl29018 7-0044: Failed to read 1: -6 [ 1.544302] isl29018 7-0044: regmap initialization fails: -6 [ 1.555209] NET: Registered protocol family 10 [ 1.559641] sit: IPv6 over IPv4 tunneling driver [ 1.563222] NET: Registered protocol family 17 [ 1.567227] can: controller area network core (rev 20120528 abi 9) [ 1.573419] NET: Registered protocol family 29 [ 1.577806] can: raw protocol (rev 20120528) [ 1.582054] can: broadcast manager protocol (rev 20120528 t) [ 1.587697] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593423] Key type dns_resolver registered [ 1.597749] ThumbEE CPU extension supported. [ 1.601665] Registering SWP/SWPB emulation handler [ 1.611568] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617055] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623419] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628794] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638893] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649215] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654660] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664844] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671026] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676404] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686140] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708612] Waiting for root device /dev/mmcblk0p1... [ 1.712491] mmc0: tuning execution failed: -5 [ 1.716548] mmc0: error -5 whilst initialising MMC card [ 2.583174] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597317] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602774] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609145] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614529] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:58]: got exception: timeout ~$off

[PYBOOT] [pi 02:00]: Done.