Failed boards:
arndale exynos_defconfig : FAILED 1:47.01 bbb omap2plus_defconfig : FAILED 1:36.76 bbb multi_v7_defconfig : FAILED 1:38.42 beaver tegra_defconfig : FAILED 1:24.33 beaver multi_v7_defconfig : FAILED 1:01.47 capri bcm_defconfig : FAILED 1:25.67 capri multi_v7_defconfig : FAILED 1:26.16 cubie sunxi_defconfig : FAILED 1:02.72 cubie multi_v7_defconfig : FAILED 1:01.13 cubie2 sunxi_defconfig : FAILED 1:00.62 cubie2 multi_v7_defconfig : FAILED 0:59.77 cubie2 multi_lpae_defconfig : FAILED 0:58.81 dalmore tegra_defconfig : FAILED 1:35.37 dalmore multi_v7_defconfig : FAILED 1:04.59 dalmore multi_lpae_defconfig : FAILED 1:04.71 hummingboard imx_v6_v7_defconfig : FAILED 1:10.46 hummingboard multi_v7_defconfig : FAILED 1:01.55 omap5uevm omap2plus_defconfig : FAILED 1:29.17 omap5uevm multi_v7_defconfig : FAILED 1:13.98 omap5uevm multi_lpae_defconfig : FAILED 1:10.09 panda omap2plus_defconfig : FAILED 1:12.90 panda multi_v7_defconfig : FAILED 1:15.98 sama5 sama5_defconfig : FAILED 1:12.60 seaboard tegra_defconfig : FAILED 1:28.80 seaboard multi_v7_defconfig : FAILED 1:05.45 snow exynos_defconfig : FAILED 2:01.33 snowball multi_v7_defconfig : FAILED 1:08.32 trimslice tegra_defconfig : FAILED 1:14.19 trimslice multi_v7_defconfig : FAILED 1:03.94 wandboard imx_v6_v7_defconfig : FAILED 1:02.36 wandboard multi_v7_defconfig : FAILED 1:08.38
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.24 snowball u8500_defconfig : passed 1:53.84
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-exynos_defconfig failure log: -------------------------------------------------
[ 0.680420] io scheduler cfq registered (default) [ 0.730004] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.731269] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 0.731607] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 0.731924] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 1.988238] console [ttySAC2] enabled [ 1.992260] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 2.008218] brd: module loaded [ 2.013232] loop: module loaded [ 2.015383] usbcore: registered new interface driver asix [ 2.020357] usbcore: registered new interface driver ax88179_178a [ 2.026432] usbcore: registered new interface driver cdc_ether [ 2.032263] usbcore: registered new interface driver smsc75xx [ 2.038001] usbcore: registered new interface driver smsc95xx [ 2.043698] usbcore: registered new interface driver net1080 [ 2.049344] usbcore: registered new interface driver cdc_subset [ 2.055244] usbcore: registered new interface driver zaurus [ 2.060843] usbcore: registered new interface driver cdc_ncm [ 2.066591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.072901] ehci-exynos: EHCI EXYNOS driver [ 2.077225] usbcore: registered new interface driver usb-storage [ 2.083551] mousedev: PS/2 mouse device common for all mice [ 2.089061] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.094419] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc0 [ 2.100341] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it [ 2.108398] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.116096] sdhci: Secure Digital Host Controller Interface driver [ 2.122190] sdhci: Copyright(c) Pierre Ossman [ 2.126652] Synopsys Designware Multimedia Card Interface Driver [ 2.133554] usbcore: registered new interface driver usbhid [ 2.138081] usbhid: USB HID core driver [ 2.142040] TCP: cubic registered [ 2.145202] NET: Registered protocol family 17 [ 2.149668] NET: Registered protocol family 15 [ 2.154111] Registering SWP/SWPB emulation handler [ 2.176333] VDD_IOPERI_1.8V: disabling [ 2.182601] s3c-rtc 101e0000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.190819] Waiting for root device /dev/mmcblk0p1... ~$off # PYBOOT: Exception: timeout
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.067941] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.075927] usbcore: registered new interface driver pegasus [ 1.082030] usbcore: registered new interface driver asix [ 1.087794] usbcore: registered new interface driver ax88179_178a [ 1.094311] usbcore: registered new interface driver cdc_ether [ 1.100587] usbcore: registered new interface driver smsc75xx [ 1.106753] usbcore: registered new interface driver smsc95xx [ 1.112908] usbcore: registered new interface driver net1080 [ 1.118940] usbcore: registered new interface driver cdc_subset [ 1.125272] usbcore: registered new interface driver zaurus [ 1.131332] usbcore: registered new interface driver cdc_ncm [ 1.137333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.144234] ehci-pci: EHCI PCI platform driver [ 1.149002] ehci-platform: EHCI generic platform driver [ 1.154678] ehci-omap: OMAP-EHCI Host Controller driver [ 1.160317] ehci-orion: EHCI orion driver [ 1.164641] SPEAr-ehci: EHCI SPEAr driver [ 1.168974] tegra-ehci: Tegra EHCI driver [ 1.173911] usbcore: registered new interface driver usb-storage [ 1.182198] mousedev: PS/2 mouse device common for all mice [ 1.190361] i2c /dev entries driver [ 1.194789] usbcore: registered new interface driver uvcvideo [ 1.200875] USB Video Class driver (1.1.1) [ 1.205189] gspca_main: v2.14.0 registered [ 1.211295] sdhci: Secure Digital Host Controller Interface driver [ 1.217793] sdhci: Copyright(c) Pierre Ossman [ 1.223080] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.229743] usbcore: registered new interface driver usbhid [ 1.235645] usbhid: USB HID core driver [ 1.244217] TCP: cubic registered [ 1.247736] NET: Registered protocol family 17 [ 1.252891] Key type dns_resolver registered [ 1.258342] ThumbEE CPU extension supported. [ 1.262943] Registering SWP/SWPB emulation handler [ 1.269938] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.284255] ALSA device list: [ 1.287399] No soundcards found. [ 1.292221] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board bbb-omap2plus_defconfig failure log: -------------------------------------------------
[ 0.777081] io scheduler deadline registered [ 0.777202] io scheduler cfq registered (default) [ 0.780055] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.783661] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.794629] omap_uart 44e09000.serial: no wakeirq for uart0 [ 0.794704] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@44e09000[0]' [ 0.795471] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.499893] console [ttyO0] enabled [ 1.552810] brd: module loaded [ 1.584140] loop: module loaded [ 1.591988] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.602819] usbcore: registered new interface driver asix [ 1.608737] usbcore: registered new interface driver ax88179_178a [ 1.615439] usbcore: registered new interface driver cdc_ether [ 1.621913] usbcore: registered new interface driver smsc95xx [ 1.628149] usbcore: registered new interface driver net1080 [ 1.634356] usbcore: registered new interface driver cdc_subset [ 1.640835] usbcore: registered new interface driver zaurus [ 1.647041] usbcore: registered new interface driver cdc_ncm [ 1.656594] usbcore: registered new interface driver cdc_wdm [ 1.663105] usbcore: registered new interface driver usb-storage [ 1.669694] usbcore: registered new interface driver usbtest [ 1.680832] mousedev: PS/2 mouse device common for all mice [ 1.692382] i2c /dev entries driver [ 1.696205] Driver for 1-wire Dallas network protocol. [ 1.704574] ledtrig-cpu: registered to indicate activity on CPUs [ 1.711913] usbcore: registered new interface driver usbhid [ 1.717755] usbhid: USB HID core driver [ 1.723319] oprofile: using arm/armv7 [ 1.728226] TCP: cubic registered [ 1.731899] Initializing XFRM netlink socket [ 1.736581] NET: Registered protocol family 17 [ 1.741435] NET: Registered protocol family 15 [ 1.746612] Key type dns_resolver registered [ 1.753099] ThumbEE CPU extension supported. [ 1.757653] Registering SWP/SWPB emulation handler [ 1.772415] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.813816] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
Tegra30 (Beaver) # tftp 0x82000000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140513/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3.5 MiB/s done Bytes transferred = 4666616 (4734f8 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 next/next-20140513/multi_v7_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 next/next-20140513/multi_v7_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 814.5 KiB/s done Bytes transferred = 24197 (5e85 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffe84 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-tegra_defconfig failure log: -------------------------------------------------
[ 0.801197] usbcore: registered new interface driver ax88179_178a [ 0.807319] usbcore: registered new interface driver cdc_ether [ 0.813266] usbcore: registered new interface driver smsc75xx [ 0.819053] usbcore: registered new interface driver smsc95xx [ 0.824840] usbcore: registered new interface driver net1080 [ 0.830544] usbcore: registered new interface driver cdc_subset [ 0.836552] usbcore: registered new interface driver zaurus [ 0.842230] usbcore: registered new interface driver cdc_ncm [ 0.847825] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.854381] ehci-pci: EHCI PCI platform driver [ 0.858977] tegra-ehci: Tegra EHCI driver [ 0.863315] usbcore: registered new interface driver cdc_acm [ 0.868665] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.876853] usbcore: registered new interface driver cdc_wdm [ 0.882595] usbcore: registered new interface driver usb-storage [ 0.889192] mousedev: PS/2 mouse device common for all mice [ 0.895919] usbcore: registered new interface driver uvcvideo [ 0.899951] USB Video Class driver (1.1.1) [ 0.904157] gspca_main: v2.14.0 registered [ 0.908852] sdhci: Secure Digital Host Controller Interface driver [ 0.914524] sdhci: Copyright(c) Pierre Ossman [ 0.918936] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.925270] usbcore: registered new interface driver usbhid [ 0.930284] usbhid: USB HID core driver [ 0.937544] TCP: cubic registered [ 0.939258] NET: Registered protocol family 10 [ 0.944761] mip6: Mobile IPv6 [ 0.946574] sit: IPv6 over IPv4 tunneling driver [ 0.953508] NET: Registered protocol family 17 [ 0.956156] NET: Registered protocol family 15 [ 0.960742] Bluetooth: RFCOMM socket layer initialized [ 0.965866] Bluetooth: RFCOMM ver 1.11 [ 0.969655] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 0.975041] Bluetooth: BNEP socket layer initialized [ 0.980045] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.986043] Bluetooth: HIDP socket layer initialized [ 0.992119] Registering SWP/SWPB emulation handler [ 0.996627] bootconsole [earlycon0] disabled ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-bcm_defconfig failure log: -------------------------------------------------
[ 0.060000] NET: Registered protocol family 16 [ 0.060000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.060000] cpuidle: using governor ladder [ 0.060000] cpuidle: using governor menu [ 0.060000] Kona Secure API initialized [ 0.060000] L310 cache controller enabled [ 0.060000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x1e050000, Cache size: 512 kB [ 0.100000] SCSI subsystem initialized [ 0.100000] NET: Registered protocol family 2 [ 0.100000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.100000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.100000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.100000] TCP: reno registered [ 0.100000] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.100000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.100000] NET: Registered protocol family 1 [ 0.100000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.110000] fuse init (API version 7.23) [ 0.110000] msgmni has been set to 1496 [ 0.110000] io scheduler noop registered [ 0.110000] io scheduler deadline registered [ 0.110000] io scheduler cfq registered (default) [ 0.110000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.110000] console [ttyS0] disabled [ 0.110000] 3e000000.uart: ttyS0 at MMIO 0x3e000000 (irq = 99, base_baud = 808290) is a 16550A [ 0.390000] console [ttyS0] enabled [ 0.390000] mousedev: PS/2 mouse device common for all mice [ 0.390000] i2c /dev entries driver [ 0.400000] sdhci: Secure Digital Host Controller Interface driver [ 0.400000] sdhci: Copyright(c) Pierre Ossman [ 0.410000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.410000] TCP: cubic registered [ 0.410000] NET: Registered protocol family 10 [ 0.420000] sit: IPv6 over IPv4 tunneling driver [ 0.420000] NET: Registered protocol family 17 [ 0.420000] NET: Registered protocol family 15 [ 0.430000] ThumbEE CPU extension supported. [ 0.430000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.540000] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.550000] usbcore: registered new interface driver pegasus [ 0.550000] usbcore: registered new interface driver asix [ 0.560000] usbcore: registered new interface driver ax88179_178a [ 0.560000] usbcore: registered new interface driver cdc_ether [ 0.570000] usbcore: registered new interface driver smsc75xx [ 0.570000] usbcore: registered new interface driver smsc95xx [ 0.580000] usbcore: registered new interface driver net1080 [ 0.580000] usbcore: registered new interface driver cdc_subset [ 0.590000] usbcore: registered new interface driver zaurus [ 0.590000] usbcore: registered new interface driver cdc_ncm [ 0.600000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.600000] ehci-pci: EHCI PCI platform driver [ 0.610000] ehci-platform: EHCI generic platform driver [ 0.610000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.620000] ehci-orion: EHCI orion driver [ 0.620000] SPEAr-ehci: EHCI SPEAr driver [ 0.620000] tegra-ehci: Tegra EHCI driver [ 0.630000] usbcore: registered new interface driver usb-storage [ 0.630000] mousedev: PS/2 mouse device common for all mice [ 0.640000] i2c /dev entries driver [ 0.640000] usbcore: registered new interface driver uvcvideo [ 0.650000] USB Video Class driver (1.1.1) [ 0.650000] gspca_main: v2.14.0 registered [ 0.650000] sdhci: Secure Digital Host Controller Interface driver [ 0.660000] sdhci: Copyright(c) Pierre Ossman [ 0.660000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.670000] usbcore: registered new interface driver usbhid [ 0.670000] usbhid: USB HID core driver [ 0.680000] TCP: cubic registered [ 0.680000] NET: Registered protocol family 17 [ 0.680000] Key type dns_resolver registered [ 0.690000] ThumbEE CPU extension supported. [ 0.690000] Registering SWP/SWPB emulation handler [ 0.690000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.700000] ALSA device list: [ 0.700000] No soundcards found. [ 0.700000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
sun4i#tftp 0x42000000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x42000000 next/next-20140513/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 2.6 MiB/s done Bytes transferred = 4666616 (4734f8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140513/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140513/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.139 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x42000000 next/next-20140513/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140513/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140513/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 3 MiB/s done Bytes transferred = 1845104 (1c2770 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x48000000 next/next-20140513/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x48000000 next/next-20140513/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.139 Filename 'next/next-20140513/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x42000000 - 0x48000000 bootz 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2770 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
sun7i# tftp 0x42000000 next/next-20140513/multi_lpae_defconfig/zImage tftp 0x42000000 next/next-20140513/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/multi_lpae_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 4.4 MiB/s done Bytes transferred = 4689824 (478fa0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140513/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140513/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 668.9 KiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x478fa0 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x42000000 next/next-20140513/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 4.3 MiB/s done Bytes transferred = 4666616 (4734f8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140513/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 nenode: cubie2 status: on xt/next-20140513/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 694.3 KiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.117 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x42000000 next/next-20140513/sunxi_defconfig/zImage tftp 0x42000000 next/next-20140513/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/sunxi_defconfig/zImage'. Load address: 0x42000000 Loading: *################################################################# ############################################################# 4.4 MiB/s done Bytes transferred = 1845104 (1c2770 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x44000000 next/next-20140513/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x44000000 next/next-20140513/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.117 Filename 'next/next-20140513/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *## 3.5 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x42000000 - 0x44000000 bootz 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x1c2770 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 40ff8000, end 40fff844 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140513/multi_lpae_defconfig/zImage tftp 0x82000000 next/next-20140513/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.120 Filename 'next/next-20140513/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 2.9 MiB/s done Bytes transferred = 4689824 (478fa0 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140513/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140513/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.120 Filename 'next/next-20140513/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 619.1 KiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x478fa0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x82000000 next/next-20140513/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.120 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3 MiB/s done Bytes transferred = 4666616 (4734f8 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) #tftp 0x83000000 next/next-20140513/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 next/next-20140513/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.120 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 903.3 KiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log: -------------------------------------------------
[ 1.024492] usbcore: registered new interface driver ax88179_178a [ 1.030706] usbcore: registered new interface driver cdc_ether [ 1.036800] usbcore: registered new interface driver smsc75xx [ 1.042537] usbcore: registered new interface driver smsc95xx [ 1.048216] usbcore: registered new interface driver net1080 [ 1.053913] usbcore: registered new interface driver cdc_subset [ 1.059914] usbcore: registered new interface driver zaurus [ 1.065738] usbcore: registered new interface driver cdc_ncm [ 1.071150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.077379] ehci-pci: EHCI PCI platform driver [ 1.082319] tegra-ehci: Tegra EHCI driver [ 1.087691] usbcore: registered new interface driver cdc_acm [ 1.091596] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.100259] usbcore: registered new interface driver cdc_wdm [ 1.106076] usbcore: registered new interface driver usb-storage [ 1.114793] mousedev: PS/2 mouse device common for all mice [ 1.126532] usbcore: registered new interface driver uvcvideo [ 1.130472] USB Video Class driver (1.1.1) [ 1.134658] gspca_main: v2.14.0 registered [ 1.141555] sdhci: Secure Digital Host Controller Interface driver [ 1.145924] sdhci: Copyright(c) Pierre Ossman [ 1.150456] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.159071] usbcore: registered new interface driver usbhid [ 1.162834] usbhid: USB HID core driver [ 1.183620] TCP: cubic registered [ 1.186305] NET: Registered protocol family 10 [ 1.195181] mip6: Mobile IPv6 [ 1.196466] sit: IPv6 over IPv4 tunneling driver [ 1.212046] NET: Registered protocol family 17 [ 1.214870] NET: Registered protocol family 15 [ 1.219729] Bluetooth: RFCOMM socket layer initialized [ 1.224456] Bluetooth: RFCOMM ver 1.11 [ 1.228348] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.233640] Bluetooth: BNEP socket layer initialized [ 1.238701] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.244653] Bluetooth: HIDP socket layer initialized [ 1.254731] Registering SWP/SWPB emulation handler [ 1.261231] bootconsole [earlycon0] disabled ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
tftp 0x12000000 next/next-20140513/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140513/imx_v6_v7_defconfig/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 2 MiB/s done Bytes transferred = 5287104 (50acc0 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x18000000 next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x18000000 next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *## 1 MiB/s done Bytes transferred = 26460 (675c hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x12000000 - 0x18000000 bootz 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x50acc0 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800975b
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot > tftp 0x12000000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x12000000 next/next-20140513/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 2 MiB/s done Bytes transferred = 4666616 (4734f8 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x18000000 next/next-20140513/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x18000000 next/next-20140513/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x18000000 Loading: *## 738.3 KiB/s done Bytes transferred = 26460 (675c hex) C1 U-Boot >printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot >bootz 0x12000000 - 0x18000000 bootz 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800975b
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 2.7 MiB/s done Bytes transferred = 4689824 (478fa0 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot#tftp 0x82000000 next/next-20140513/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140513/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 1.1 MiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x478fa0 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200e0a3
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 2.6 MiB/s done Bytes transferred = 4666616 (4734f8 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140513/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140513/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 833 KiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200e0a3
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################### 2.7 MiB/s done Bytes transferred = 4330304 (421340 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 next/next-20140513/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 next/next-20140513/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.106 Filename 'next/next-20140513/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *#### 1.1 MiB/s done Bytes transferred = 45220 (b0a4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x421340 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200e0a3
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ########################################################## done Bytes transferred = 4666680 (473538 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x82000000 next/next-20140513/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x82000000 next/next-20140513/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x82000000 Loading: *#### done Bytes transferred = 55467 (d8ab hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x81000000 - 0x82000000 bootm 0x81000000 - 0x82000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4666616 Bytes = 4.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Kernel Image ... OK OK Using Device Tree in place at 82000000, end 820108aa
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-omap2plus_defconfig failure log: -------------------------------------------------
################################################################# ################################################################# ################################################################# ################################### done Bytes transferred = 4330368 (421380 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x82000000 next/next-20140513/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x82000000 next/next-20140513/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'next/next-20140513/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x82000000 Loading: *#### done Bytes transferred = 55467 (d8ab hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x81000000 - 0x82000000 bootm 0x81000000 - 0x82000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4330304 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Kernel Image ... OK OK Using Device Tree in place at 82000000, end 820108aa
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board sama5-sama5_defconfig failure log: -------------------------------------------------
done Bytes transferred = 3040656 (2e6590 hex) U-Boot> setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot> tftp 0x21000000 next/next-20140513/sama5_defconfig/dtbs/sama5d35ek.dtb tftp 0x21000000 next/next-20140513/sama5_defconfig/dtbs/sama5d35ek.dtb gmacb0: PHY present at 1 gmacb0: link up, 1000Mbps full-duplex (lpa: 0x0300) Using gmacb0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.199 Filename 'next/next-20140513/sama5_defconfig/dtbs/sama5d35ek.dtb'. Load address: 0x21000000 Loading: *## done Bytes transferred = 28144 (6df0 hex) U-Boot> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> bootm 0x22000000 - 0x21000000 bootm 0x22000000 - 0x21000000 ## Booting kernel from Legacy Image at 22000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3040592 Bytes = 2.9 MiB Load Address: 20008000 Entry Point: 20008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 21000000 Booting using the fdt blob at 0x21000000 Loading Kernel Image ... OK OK Loading Device Tree to 3fd80000, end 3fd89def ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
Tegra20 (SeaBoard) # tftp 0x800000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x800000 next/next-20140513/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.118 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3.3 MiB/s done Bytes transferred = 4666616 (4734f8 hex) Tegra20 (SeaBoard) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x1800000 next/next-20140513/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb tftp 0x1800000 next/next-20140513/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.118 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 538.1 KiB/s done Bytes transferred = 26465 (6761 hex) Tegra20 (SeaBoard) # printenv bootargs printenv bootargs bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffff760 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-tegra_defconfig failure log: -------------------------------------------------
[ 0.694549] usbcore: registered new interface driver smsc75xx [ 0.700454] usbcore: registered new interface driver smsc95xx [ 0.706300] usbcore: registered new interface driver net1080 [ 0.712071] usbcore: registered new interface driver cdc_subset [ 0.718099] usbcore: registered new interface driver zaurus [ 0.723825] usbcore: registered new interface driver cdc_ncm [ 0.729533] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.736059] ehci-pci: EHCI PCI platform driver [ 0.740700] tegra-ehci: Tegra EHCI driver [ 0.745110] usbcore: registered new interface driver cdc_acm [ 0.750765] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.758946] usbcore: registered new interface driver cdc_wdm [ 0.764748] usbcore: registered new interface driver usb-storage [ 0.771489] mousedev: PS/2 mouse device common for all mice [ 0.779019] usbcore: registered new interface driver uvcvideo [ 0.784749] USB Video Class driver (1.1.1) [ 0.788941] gspca_main: v2.14.0 registered [ 0.793618] cpufreq: __cpufreq_add_dev: CPU0: Running at unlisted freq: 1200000 KHz [ 0.803083] cpufreq: __cpufreq_add_dev: CPU0: Unlisted initial frequency changed to: 1000000 KHz [ 0.812452] sdhci: Secure Digital Host Controller Interface driver [ 0.818635] sdhci: Copyright(c) Pierre Ossman [ 0.823043] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.829582] usbcore: registered new interface driver usbhid [ 0.835140] usbhid: USB HID core driver [ 0.843580] TCP: cubic registered [ 0.847145] NET: Registered protocol family 10 [ 0.853024] mip6: Mobile IPv6 [ 0.855989] sit: IPv6 over IPv4 tunneling driver [ 0.863712] NET: Registered protocol family 17 [ 0.868217] NET: Registered protocol family 15 [ 0.872747] Bluetooth: RFCOMM socket layer initialized [ 0.877889] Bluetooth: RFCOMM ver 1.11 [ 0.881727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 0.887077] Bluetooth: BNEP socket layer initialized [ 0.892109] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.898093] Bluetooth: HIDP socket layer initialized [ 0.903929] Registering SWP/SWPB emulation handler [ 0.909603] bootconsole [earlycon0] disabled ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-exynos_defconfig failure log: -------------------------------------------------
[ 2920.662954] Console: switching to colour frame buffer device 195x54 [ 2920.669332] simple-framebuffer bfc00000.framebuffer: fb0: simplefb registered! [ 2920.708005] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2920.708809] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83, base_baud = 0) is a S3C6400/10 [ 2920.709022] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84, base_baud = 0) is a S3C6400/10 [ 2920.709223] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85, base_baud = 0) is a S3C6400/10 [ 2920.709422] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86, base_baud = 0) is a S3C6400/10 [ 2921.258471] console [ttySAC3] enabled [ 2921.266618] brd: module loaded [ 2921.270261] loop: module loaded [ 2921.272207] usbcore: registered new interface driver asix [ 2921.277353] usbcore: registered new interface driver ax88179_178a [ 2921.283417] usbcore: registered new interface driver cdc_ether [ 2921.289247] usbcore: registered new interface driver smsc75xx [ 2921.294986] usbcore: registered new interface driver smsc95xx [ 2921.300708] usbcore: registered new interface driver net1080 [ 2921.306334] usbcore: registered new interface driver cdc_subset [ 2921.312231] usbcore: registered new interface driver zaurus [ 2921.317819] usbcore: registered new interface driver cdc_ncm [ 2921.323480] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2921.329911] ehci-exynos: EHCI EXYNOS driver [ 2921.334156] usbcore: registered new interface driver usb-storage [ 2921.340339] mousedev: PS/2 mouse device common for all mice [ 2921.345887] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2921.351337] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc0 [ 2921.357345] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it [ 2921.365083] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2921.373085] sdhci: Secure Digital Host Controller Interface driver [ 2921.379206] sdhci: Copyright(c) Pierre Ossman [ 2921.383602] Synopsys Designware Multimedia Card Interface Driver [ 2921.390133] usbcore: registered new interface driver usbhid [ 2921.395090] usbhid: USB HID core driver [ 2921.399004] TCP: cubic registered [ 2921.402218] NET: Registered protocol family 17 [ 2921.406660] NET: Registered protocol family 15 [ 2921.411108] Registering SWP/SWPB emulation handler [ 2921.416274] s3c-rtc 101e0000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2921.425065] Waiting for root device /dev/mmcblk0p3... ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.112 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-XVehHX/tmp3qQe0I-uImage tftp 0x01000000 tmp/snowball-XVehHX/tmp3qQe0I-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.112 Filename 'tmp/snowball-XVehHX/tmp3qQe0I-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4707925 (47d655 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4707861 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
Tegra20 (TrimSlice) # tftp 0x800000 next/next-20140513/multi_v7_defconfig/zImage tftp 0x800000 next/next-20140513/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3.4 MiB/s done Bytes transferred = 4666616 (4734f8 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140513/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 next/next-20140513/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 2.4 MiB/s done Bytes transferred = 20401 (4fb1 hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffffb0 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-tegra_defconfig failure log: -------------------------------------------------
Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'next/next-20140513/tegra_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################### 3.4 MiB/s done Bytes transferred = 4344744 (424ba8 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140513/tegra_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 next/next-20140513/tegra_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.102 Filename 'next/next-20140513/tegra_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 2.4 MiB/s done Bytes transferred = 20401 (4fb1 hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x424ba8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffffb0 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
tftp 0x12000000 next/next-20140513/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140513/imx_v6_v7_defconfig/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 6.4 MiB/s done Bytes transferred = 5287104 (50acc0 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x18000000 next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x18000000 next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140513/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 998 KiB/s done Bytes transferred = 29638 (73c6 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x12000000 - 0x18000000 bootz 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x50acc0 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a3c5
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x12000000 next/next-20140513/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140513/multi_v7_defconfig/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 7.1 MiB/s done Bytes transferred = 4666616 (4734f8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x18000000 next/next-20140513/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x18000000 next/next-20140513/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140513/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 963.9 KiB/s done Bytes transferred = 29638 (73c6 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x12000000 - 0x18000000 bootz node: wandboard status: on 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x4734f8 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a3c5
Starting kernel ...
~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org
-
Olof's autobooter