Automated DT boot report for various ARM defconfigs.

Tree/Branch: mainline Git describe: v3.14-rc4-120-g8427def Failed boot tests (console logs at the end) =========================================== legacy,3730xm: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig

Full Report ===========

da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.2 sec

omap2plus_defconfig ------------------- legacy,3730xm FAIL: 0 min 43.0 sec am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm FAIL: 0 min 31.4 sec legacy,3530beagle PASS: 0 min 35.9 sec omap4-panda PASS: 1 min 13.0 sec omap3-overo-tobi PASS: 0 min 22.9 sec am335x-bone PASS: 0 min 27.3 sec omap3-overo-storm-tobi PASS: 0 min 25.6 sec omap5-uevm PASS: 1 min 2.6 sec omap4-panda-es PASS: 1 min 13.0 sec legacy,3730storm PASS: 0 min 23.8 sec legacy,3530overo PASS: 0 min 21.0 sec

multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 43.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec

tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec

imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 17.0 sec

msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.4 sec

bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.6 sec

sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.7 sec sun4i-a10-cubieboard PASS: 0 min 16.9 sec

exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec

multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.5 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 23.2 sec omap3-beagle-xm PASS: 0 min 51.3 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 1 min 2.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 18.5 sec bcm28155-ap PASS: 0 min 59.1 sec omap3-overo-tobi PASS: 0 min 21.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 25.9 sec omap3-overo-storm-tobi PASS: 0 min 24.0 sec omap5-uevm PASS: 1 min 49.4 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 49.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec

u8500_defconfig --------------- ste-snowball PASS: 0 min 30.9 sec

sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec

davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.6 sec

mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.3 sec

Console logs for failures =========================

omap2plus_defconfig -------------------

legacy,3730xm: FAIL: last 80 lines of boot log: -----------------------------------------------

U-Boot 2013.04 (Jan 17 2014 - 10:48:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.2 OMAP3 beagleboard.org #setenv usbethaddr 2a:45:34:6d:b4:5d setenv usbethaddr 2a:45:34:6d:b4:5d OMAP3 beagleboard.org # setenv preboot "dcache off; usb start" # For USB net setenv preboot "dcache off; usb start" # For USB net OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 OMAP3 beagleboard.org #setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' OMAP3 beagleboard.org # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org #setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-y26vuV/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-y26vuV/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-y26vuV/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################ 504.9 KiB/s done Bytes transferred = 4277400 (414498 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 113.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 bootz 0x80200000 0x81000000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.02 seconds. # PYBOOT: Result: FAIL

omap3-beagle-xm: FAIL: last 80 lines of boot log: -------------------------------------------------

Connected to 3730xm console [channel connected] (~$quit to exit) (user:khilman) is already connected

~$hardreset

Command(3730xm console)> hardreset (user:khilman) Reboot 3730xm Reboot: 3730xm ; phidget 0 2 : off, sleep, on  0 OMAP3 beagleboard.org # ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL