Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-10925-ga10c38a/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:56.00 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.17 omap5uevm arm-multi_v7_defconfig : FAILED 2:14.82 omap5uevm arm-multi_lpae_defconfig : FAILED 2:20.10 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:59.57 pi arm-multi_lpae_defconfig : FAILED 1:59.18 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 2:10.22 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:19.60 arndale arm-exynos_defconfig : passed 1:29.79 arndale arm-multi_v7_defconfig : passed 1:38.02 arndale arm-multi_lpae_defconfig : passed 1:27.36 bbb arm-omap2plus_defconfig : passed 1:40.57 bbb arm-multi_v7_defconfig : passed 1:18.53 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:53.14 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:55.45 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:55.27 capri arm-bcm_defconfig : passed 0:46.38 capri arm-multi_v7_defconfig : passed 0:55.26 chitra powerpc-ppc64_defconfig : passed 3:20.26 colombus arm-sunxi_defconfig : passed 2:18.40 colombus arm-multi_v7_defconfig : passed 2:31.58 colombus arm-multi_lpae_defconfig : passed 2:29.09 cosmic arm-imx_v6_v7_defconfig : passed 3:20.21 cosmic arm-multi_v7_defconfig : passed 3:07.79 cubie arm-sunxi_defconfig : passed 0:51.85 cubie arm-multi_v7_defconfig : passed 0:52.94 cubie2 arm-sunxi_defconfig : passed 0:55.89 cubie2 arm-multi_v7_defconfig : passed 1:00.00 cubie2 arm-multi_lpae_defconfig : passed 0:54.77 cubox arm-multi_v7_defconfig : passed 1:12.20 cubox arm-mvebu_v7_defconfig : passed 1:25.76 dalmore arm-tegra_defconfig : warnings 1:27.71 dalmore arm-multi_v7_defconfig : warnings 1:29.61 dalmore arm-multi_lpae_defconfig : warnings 1:39.27 hummingboard arm-imx_v6_v7_defconfig : passed 1:29.19 hummingboard arm-multi_v7_defconfig : passed 1:16.09 jetsontk1 arm-tegra_defconfig : warnings 0:52.09 jetsontk1 arm-multi_v7_defconfig : warnings 0:48.91 jetsontk1 arm-multi_lpae_defconfig : warnings 0:51.53 pandaes arm-omap2plus_defconfig : warnings 1:42.46 pandaes arm-multi_v7_defconfig : passed 1:47.38 parallella arm-multi_v7_defconfig : passed 2:43.78 pi arm-exynos_defconfig : passed 2:12.29 pit arm-exynos_defconfig : passed 2:12.76 pit arm-multi_v7_defconfig : passed 2:27.54 pit arm-multi_lpae_defconfig : passed 2:11.79 seaboard arm-tegra_defconfig : warnings 1:07.56 seaboard arm-multi_v7_defconfig : warnings 1:03.75 seattle arm64-defconfig : passed 2:23.32 snow arm-exynos_defconfig : passed 2:05.32 snow arm-multi_v7_defconfig : passed 2:06.36 snow arm-multi_lpae_defconfig : passed 2:01.00 snowball arm-multi_v7_defconfig : passed 1:19.10 trimslice arm-multi_v7_defconfig : warnings 1:50.85 wandboard arm-imx_v6_v7_defconfig : passed 1:13.33 wandboard arm-multi_v7_defconfig : passed 1:18.13

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:13.30 beaver arm-multi_v7_defconfig : OFFLINE 2:32.94 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:19.47 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:23.96 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.81 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:47.22 sama5 arm-sama5_defconfig : OFFLINE 2:25.26 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:26.19 socfpga arm-socfpga_defconfig : OFFLINE 2:18.80 socfpga arm-multi_v7_defconfig : OFFLINE 2:16.07 trimslice arm-tegra_defconfig : OFFLINE 2:20.04

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.786156] NET: Registered protocol family 10 [ 1.786753] sit: IPv6 over IPv4 tunneling driver [ 1.791685] NET: Registered protocol family 17 [ 1.794924] NET: Registered protocol family 15 [ 1.799402] Key type dns_resolver registered [ 1.803723] Registering SWP/SWPB emulation handler [ 1.811677] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816286] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823720] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.830865] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837443] [drm] No driver support for vblank timestamp query. [ 1.843359] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849688] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.854896] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862095] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.870954] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.880640] mmc1: new DDR MMC card at address 0001 [ 1.885759] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.887122] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889416] max98090 1-0010: use default 2.8v micbias [ 1.899763] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.905425] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.911731] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.911947] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.915620] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.930836] mmcblk1: p1 p2 [ 1.949028] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.971261] VDD10_HDMI_1.0V: disabling [ 1.972008] vdd_g3d: disabling [ 1.973062] BUCK8_2.8V: disabling [ 1.977138] ALSA device list: [ 1.978655] #0: Odroid-U3 [ 1.982571] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:54]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:55]: Done.

========================================================================

Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.947340] mmc0: new high speed MMC card at address 0001 [ 1.953348] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.958297] smps9: Bringing 0uV into 2100000-2100000uV [ 1.958300] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.958525] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.966082] smsc95xx v1.0.4 [ 1.981802] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.988306] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.996275] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.007435] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.015613] ldo9: bypassed regulator has no supply! [ 2.020732] ldo9: failed to get the current voltage(-517) [ 2.022963] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 7a:e5:ee:45:55:38 [ 2.038086] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.053410] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.079259] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.085658] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112369] smps9: Bringing 0uV into 2100000-2100000uV [ 2.131323] ldo9: bypassed regulator has no supply! [ 2.136439] ldo9: failed to get the current voltage(-517) [ 2.142107] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156702] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 04:38:25 UTC (946701505) [ 2.172356] pbias_mmc_omap5: disabling [ 2.176318] vmmcsdio_fixed: disabling [ 2.180838] Waiting for root device /dev/mmcblk1p2... [ 2.263474] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.399257] hub 1-2:1.0: USB hub found [ 2.403271] hub 1-2:1.0: 3 ports detected [ 2.409205] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.437310] smps9: Bringing 0uV into 2100000-2100000uV [ 2.456259] ldo9: bypassed regulator has no supply! [ 2.461374] ldo9: failed to get the current voltage(-517) [ 2.467044] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:18]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:19]: Done.

========================================================================

Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.978249] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984810] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992881] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.003955] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012124] ldo9: bypassed regulator has no supply! [ 2.017251] ldo9: failed to get the current voltage(-517) [ 2.022919] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.037072] smsc95xx v1.0.4 [ 2.041195] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064249] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070651] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.091069] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, b2:d5:76:a8:7e:c7 [ 2.110042] smps9: Bringing 0uV into 2100000-2100000uV [ 2.128784] ldo9: bypassed regulator has no supply! [ 2.133911] ldo9: failed to get the current voltage(-517) [ 2.139578] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153673] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.187165] smps9: Bringing 0uV into 2100000-2100000uV [ 2.205896] ldo9: bypassed regulator has no supply! [ 2.211013] ldo9: failed to get the current voltage(-517) [ 2.216683] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.231152] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 04:35:48 UTC (946701348) [ 2.246802] pbias_mmc_omap5: disabling [ 2.250742] vmmcsdio_fixed: disabling [ 2.255295] Waiting for root device /dev/mmcblk1p2... [ 2.328493] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.464374] hub 1-2:1.0: USB hub found [ 2.468384] hub 1-2:1.0: 3 ports detected [ 2.474249] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.502261] smps9: Bringing 0uV into 2100000-2100000uV [ 2.520919] ldo9: bypassed regulator has no supply! [ 2.526041] ldo9: failed to get the current voltage(-517) [ 2.531694] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:12]: Done.

========================================================================

Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 3.905415] ldo9: bypassed regulator has no supply! [ 3.910554] ldo9: failed to get the current voltage(-517) [ 3.916224] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.939147] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.946709] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.953301] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.959620] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.966459] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.976059] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.985572] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.992644] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.998781] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.005092] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.011965] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.021560] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.031064] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.038103] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.058567] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.064859] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.071731] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.081322] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.090816] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.097853] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.118287] smps9: Bringing 0uV into 2100000-2100000uV [ 4.146708] ldo9: bypassed regulator has no supply! [ 4.151840] ldo9: failed to get the current voltage(-517) [ 4.157502] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.177733] hctosys: unable to open rtc device (rtc0) [ 4.183037] sr_init: No PMIC hook to init smartreflex [ 4.188541] sr_init: platform driver register failed for SR [ 4.216742] pbias_mmc_omap5: disabling [ 4.220711] vmmcsdio_fixed: disabling [ 4.226869] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:05]: Done.

========================================================================

Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.538525] isl29018 7-0044: No cache defaults, reading back from HW [ 1.544880] isl29018 7-0044: Failed to read 1: -6 [ 1.549465] isl29018 7-0044: regmap initialization fails: -6 [ 1.560372] NET: Registered protocol family 10 [ 1.564811] sit: IPv6 over IPv4 tunneling driver [ 1.568392] NET: Registered protocol family 17 [ 1.572398] can: controller area network core (rev 20120528 abi 9) [ 1.578587] NET: Registered protocol family 29 [ 1.582977] can: raw protocol (rev 20120528) [ 1.587225] can: broadcast manager protocol (rev 20120528 t) [ 1.592867] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598602] Key type dns_resolver registered [ 1.602915] ThumbEE CPU extension supported. [ 1.606836] Registering SWP/SWPB emulation handler [ 1.616744] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622223] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628590] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.633964] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644060] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654365] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.659814] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.669996] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676179] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681558] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691291] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.713529] Waiting for root device /dev/mmcblk0p1... [ 1.717413] mmc0: tuning execution failed: -5 [ 1.721468] mmc0: error -5 whilst initialising MMC card [ 2.583331] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597474] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602929] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609302] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614687] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:57]: got exception: timeout ~$off

[PYBOOT] [pi 01:58]: Done.

========================================================================

Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.538543] isl29018 7-0044: No cache defaults, reading back from HW [ 1.544896] isl29018 7-0044: Failed to read 1: -6 [ 1.549480] isl29018 7-0044: regmap initialization fails: -6 [ 1.560391] NET: Registered protocol family 10 [ 1.564833] sit: IPv6 over IPv4 tunneling driver [ 1.568409] NET: Registered protocol family 17 [ 1.572414] can: controller area network core (rev 20120528 abi 9) [ 1.578603] NET: Registered protocol family 29 [ 1.582992] can: raw protocol (rev 20120528) [ 1.587241] can: broadcast manager protocol (rev 20120528 t) [ 1.592883] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598611] Key type dns_resolver registered [ 1.602934] ThumbEE CPU extension supported. [ 1.606852] Registering SWP/SWPB emulation handler [ 1.616759] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622238] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628605] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.633981] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644073] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654405] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.659855] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670040] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676222] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681600] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691342] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.713578] Waiting for root device /dev/mmcblk0p1... [ 1.717460] mmc0: tuning execution failed: -5 [ 1.721519] mmc0: error -5 whilst initialising MMC card [ 2.583327] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597486] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602945] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609318] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614701] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:57]: got exception: timeout ~$off

[PYBOOT] [pi 01:58]: Done.

========================================================================

Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.655151] iio iio:device0: lsm303dlh_magn: WhoAmI mismatch (0x3c). [ 2.661651] st-magn-i2c: probe of 2-001e failed with error -22 [ 2.668457] iio iio:device0: Full-scale not possible [ 2.674621] iio iio:device0: registered pressure sensor lps001wp [ 2.683441] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.689636] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.702697] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.713439] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.723388] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.734130] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.758239] NET: Registered protocol family 10 [ 2.763549] sit: IPv6 over IPv4 tunneling driver [ 2.769104] NET: Registered protocol family 17 [ 2.773590] NET: Registered protocol family 35 [ 2.778106] NET: Registered protocol family 37 [ 2.782653] Registering SWP/SWPB emulation handler [ 2.789276] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.796417] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-05-07 18:49:21 UTC (957725361) [ 2.805664] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.812683] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.819671] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.826690] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.840209] db8500-esram12: disabling [ 2.843994] db8500-esram34: disabling [ 2.847686] en-3v3-fixed-supply: disabling [ 2.852050] V-CSI/DSI: disabling [ 2.855316] mmci-reg: disabling [ 2.858581] ALSA device list: [ 2.861572] #0: MOP500-card [ 2.864868] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.870849] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.877044] Waiting for root device /dev/mmcblk0p4... [ 67.560607] random: nonblocking pool is initialized

[PYBOOT] [snowball 02:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:08]: got exception: timeout ~$off

[PYBOOT] [snowball 02:09]: Done.