Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v3.16-rc2-201-gf40ede3/
Failed boards:
capri bcm_defconfig : FAILED 1:44.55 snow multi_lpae_defconfig : FAILED 1:22.23 snowball u8500_defconfig : FAILED 2:03.17
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:14.31 arndale exynos_defconfig : passed 1:18.10 arndale multi_v7_defconfig : passed 1:33.39 arndale multi_lpae_defconfig : passed 1:26.52 bbb omap2plus_defconfig : passed 1:32.72 bbb multi_v7_defconfig : passed 1:21.86 beaver tegra_defconfig : passed 1:04.58 beaver multi_v7_defconfig : passed 0:54.31 capri multi_v7_defconfig : passed 0:40.49 colombus sunxi_defconfig : passed 1:03.69 colombus multi_v7_defconfig : passed 1:02.62 colombus multi_lpae_defconfig : passed 1:03.01 cubie sunxi_defconfig : passed 1:25.11 cubie multi_v7_defconfig : passed 1:22.48 cubie2 sunxi_defconfig : passed 1:17.41 cubie2 multi_v7_defconfig : passed 1:36.10 cubie2 multi_lpae_defconfig : passed 1:03.22 cubox multi_v7_defconfig : passed 1:01.78 dalmore tegra_defconfig : passed 1:19.91 dalmore multi_v7_defconfig : passed 1:20.32 dalmore multi_lpae_defconfig : passed 1:36.84 hummingboard imx_v6_v7_defconfig : passed 1:25.01 hummingboard multi_v7_defconfig : passed 1:18.42 jetsontk1 tegra_defconfig : passed 1:03.29 jetsontk1 multi_v7_defconfig : passed 0:57.83 jetsontk1 multi_lpae_defconfig : passed 0:55.63 omap5uevm omap2plus_defconfig : warnings 1:03.84 omap5uevm multi_v7_defconfig : warnings 2:12.66 omap5uevm multi_lpae_defconfig : warnings 1:56.98 panda omap2plus_defconfig : warnings 1:37.46 panda multi_v7_defconfig : warnings 1:43.54 sama5 sama5_defconfig : warnings 1:53.06 seaboard tegra_defconfig : passed 1:00.22 seaboard multi_v7_defconfig : passed 1:11.25 snow exynos_defconfig : passed 0:56.04 snow multi_v7_defconfig : passed 0:55.87 snowball multi_v7_defconfig : passed 4:42.25 trimslice tegra_defconfig : passed 1:03.53 trimslice multi_v7_defconfig : passed 1:13.17 wandboard imx_v6_v7_defconfig : passed 1:08.95 wandboard multi_v7_defconfig : passed 1:10.92
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board capri-bcm_defconfig failure log: -------------------------------------------------
[ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 2900 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8...
[PYBOOT] [capri 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [capri 01:42]: got exception: timeout ~$off
[PYBOOT] [capri 01:44]: Done.
========================================================================
Board snow-multi_lpae_defconfig failure log: -------------------------------------------------
[ 37.321164] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 37.505332] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 37.511170] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 37.715326] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 37.721164] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 37.815353] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 937500 [ 37.821169] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 37.915297] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 950000 [ 37.921081] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.115247] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 38.121089] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.315339] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 38.321180] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.515340] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 38.521195] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.715348] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 38.721187] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.850425] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 937500 [ 38.856243] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 38.915302] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 975000 [ 38.921078] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.115269] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.121112] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.315329] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.321177] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.515337] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.521188] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.715335] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.721177] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 39.890370] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 39.896224] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 40.115322] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 40.121169] cpufreq: __target_index: Failed to change cpu frequency: -22 [ 40.315330] exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 925000 [ 40.321172] cpufreq: __target_index: Failed to change cpu frequency: -22
[PYBOOT] [snow 01:20]: got exception: ERROR: Timeout waiting for command: dmesg -l err | awk '{ print "[ERR] " $0 }'. ~$off
[PYBOOT] [snow 01:21]: Done.
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.590240] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597564] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.609039] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616851] HS USB OTG: no transceiver configured [ 3.621582] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629425] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637329] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649261] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656585] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.668060] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676666] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688568] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695892] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707366] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.715179] HS USB OTG: no transceiver configured [ 3.719909] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727752] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735687] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747619] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754943] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766418] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774993] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786926] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794250] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805725] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813537] HS USB OTG: no transceiver configured [ 3.818237] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.826110] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.834045] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845947] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.853271] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864746] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873321] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto
[PYBOOT] [snowball 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:01]: got exception: timeout ~$off
[PYBOOT] [snowball 02:02]: Done.
kernel-build-reports@lists.linaro.org