Failed boards:
cubie2 sunxi_defconfig : FAILED 1:23.40 cubie2 multi_v7_defconfig : FAILED 1:36.03 cubie2 multi_lpae_defconfig : FAILED 1:23.11 cubox multi_v7_defconfig : FAILED 1:40.83 hummingboard imx_v6_v7_defconfig : FAILED 0:34.26 hummingboard multi_v7_defconfig : FAILED 0:26.39 omap5uevm omap2plus_defconfig : FAILED 1:46.22 omap5uevm multi_v7_defconfig : FAILED 1:52.27 omap5uevm multi_lpae_defconfig : FAILED 1:56.94 snow multi_v7_defconfig : FAILED 1:13.70 snow multi_lpae_defconfig : FAILED 1:14.14 snowball u8500_defconfig : FAILED 1:53.19 trimslice tegra_defconfig : FAILED 1:29.56 trimslice multi_v7_defconfig : FAILED 1:27.18 wandboard imx_v6_v7_defconfig : FAILED 0:29.29 wandboard multi_v7_defconfig : FAILED 0:28.24
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:18.32 arndale exynos_defconfig : passed 1:18.59 arndale multi_v7_defconfig : passed 1:36.07 arndale multi_lpae_defconfig : passed 1:28.11 bbb omap2plus_defconfig : passed 1:30.64 bbb multi_v7_defconfig : passed 1:25.49 beaver tegra_defconfig : passed 2:07.69 beaver multi_v7_defconfig : passed 1:59.36 capri bcm_defconfig : passed 0:39.48 capri multi_v7_defconfig : passed 0:39.24 cubie sunxi_defconfig : passed 1:06.22 cubie multi_v7_defconfig : warnings 1:33.28 dalmore tegra_defconfig : passed 1:10.62 dalmore multi_v7_defconfig : passed 1:10.19 dalmore multi_lpae_defconfig : passed 1:10.33 jetson tegra_defconfig : passed 0:48.06 jetson multi_v7_defconfig : passed 0:48.20 jetson multi_lpae_defconfig : passed 0:45.87 panda omap2plus_defconfig : warnings 1:30.57 panda multi_v7_defconfig : warnings 1:46.02 sama5 sama5_defconfig : warnings 2:11.87 seaboard tegra_defconfig : passed 0:53.17 seaboard multi_v7_defconfig : passed 0:54.97 snow exynos_defconfig : passed 1:31.41 snowball multi_v7_defconfig : passed 3:14.68
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.628773] coherent pool not initialised! [ 1.632871] Modules linked in: [ 1.635948] CPU: 0 PID: 34 Comm: kworker/u4:1 Tainted: G W 3.15.0-rc7-next-20140602 #1 [ 1.644823] Workqueue: deferwq deferred_probe_work_func [ 1.650078] [<c0216304>] (unwind_backtrace) from [<c0211cb8>] (show_stack+0x10/0x14) [ 1.657833] [<c0211cb8>] (show_stack) from [<c081ad48>] (dump_stack+0x88/0x98) [ 1.665067] [<c081ad48>] (dump_stack) from [<c024c314>] (warn_slowpath_common+0x6c/0x88) [ 1.673162] [<c024c314>] (warn_slowpath_common) from [<c024c360>] (warn_slowpath_fmt+0x30/0x40) [ 1.681863] [<c024c360>] (warn_slowpath_fmt) from [<c021bb18>] (__dma_alloc+0x2c4/0x2e8) [ 1.689955] [<c021bb18>] (__dma_alloc) from [<c021bca8>] (arm_dma_alloc+0xb0/0xb8) [ 1.697528] [<c021bca8>] (arm_dma_alloc) from [<c06296fc>] (ohci_init+0x12c/0x284) [ 1.705105] [<c06296fc>] (ohci_init) from [<c0609784>] (usb_add_hcd+0x238/0x764) [ 1.712506] [<c0609784>] (usb_add_hcd) from [<c062b520>] (ohci_platform_probe+0x1d0/0x414) [ 1.720774] [<c062b520>] (ohci_platform_probe) from [<c0537b50>] (platform_drv_probe+0x18/0x48) [ 1.729475] [<c0537b50>] (platform_drv_probe) from [<c0536428>] (driver_probe_device+0x118/0x24c) [ 1.738352] [<c0536428>] (driver_probe_device) from [<c0534b2c>] (bus_for_each_drv+0x58/0x8c) [ 1.746880] [<c0534b2c>] (bus_for_each_drv) from [<c05362e0>] (device_attach+0x74/0x88) [ 1.754879] [<c05362e0>] (device_attach) from [<c05359c8>] (bus_probe_device+0x84/0xa8) [ 1.762884] [<c05359c8>] (bus_probe_device) from [<c0535de8>] (deferred_probe_work_func+0x64/0x94) [ 1.771847] [<c0535de8>] (deferred_probe_work_func) from [<c0261434>] (process_one_work+0x10c/0x37c) [ 1.780982] [<c0261434>] (process_one_work) from [<c0261d50>] (worker_thread+0x50/0x5d8) [ 1.789074] [<c0261d50>] (worker_thread) from [<c02673cc>] (kthread+0xd8/0xf0) [ 1.796303] [<c02673cc>] (kthread) from [<c020e7f8>] (ret_from_fork+0x14/0x3c) [ 1.803521] ---[ end trace 5ae2f6049a9017b3 ]--- [ 1.808143] ohci-platform 1c1c400.usb: can't setup: -12 [ 1.813376] ohci-platform 1c1c400.usb: USB bus 1 deregistered [ 1.819170] ohci-platform: probe of 1c1c400.usb failed with error -12 [ 1.826289] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.899584] stmmac_open: DMA descriptors allocation failed [ 1.905210] IP-Config: Failed to open eth0 [ 1.909307] IP-Config: No network devices available [ 1.914221] usb2-vbus: disabling [ 1.917462] usb1-vbus: disabling [ 1.920695] ahci-5v: disabling [ 1.923746] vcc3v3: disabling [ 1.926717] vcc3v0: disabling [ 1.929807] ALSA device list: [ 1.932771] No soundcards found. ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.628134] coherent pool not initialised! [ 1.632231] Modules linked in: [ 1.635305] CPU: 0 PID: 34 Comm: kworker/u4:1 Tainted: G W 3.15.0-rc7-next-20140602 #1 [ 1.644180] Workqueue: deferwq deferred_probe_work_func [ 1.649434] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 1.657187] [<c0211c68>] (show_stack) from [<c0813dfc>] (dump_stack+0x88/0x98) [ 1.664423] [<c0813dfc>] (dump_stack) from [<c024b788>] (warn_slowpath_common+0x6c/0x88) [ 1.672520] [<c024b788>] (warn_slowpath_common) from [<c024b7d4>] (warn_slowpath_fmt+0x30/0x40) [ 1.681222] [<c024b7d4>] (warn_slowpath_fmt) from [<c021bbdc>] (__dma_alloc+0x250/0x278) [ 1.689314] [<c021bbdc>] (__dma_alloc) from [<c021bd48>] (arm_dma_alloc+0x9c/0xa4) [ 1.696887] [<c021bd48>] (arm_dma_alloc) from [<c0623650>] (ohci_init+0x12c/0x284) [ 1.704460] [<c0623650>] (ohci_init) from [<c060392c>] (usb_add_hcd+0x238/0x770) [ 1.711860] [<c060392c>] (usb_add_hcd) from [<c0625460>] (ohci_platform_probe+0x1c0/0x400) [ 1.720127] [<c0625460>] (ohci_platform_probe) from [<c05324ac>] (platform_drv_probe+0x18/0x48) [ 1.728827] [<c05324ac>] (platform_drv_probe) from [<c0530d84>] (driver_probe_device+0x118/0x24c) [ 1.737709] [<c0530d84>] (driver_probe_device) from [<c052f488>] (bus_for_each_drv+0x58/0x8c) [ 1.746235] [<c052f488>] (bus_for_each_drv) from [<c0530c3c>] (device_attach+0x74/0x88) [ 1.754240] [<c0530c3c>] (device_attach) from [<c0530324>] (bus_probe_device+0x84/0xa8) [ 1.762243] [<c0530324>] (bus_probe_device) from [<c0530744>] (deferred_probe_work_func+0x64/0x94) [ 1.771204] [<c0530744>] (deferred_probe_work_func) from [<c02605d0>] (process_one_work+0x10c/0x37c) [ 1.780339] [<c02605d0>] (process_one_work) from [<c0260eec>] (worker_thread+0x50/0x5d8) [ 1.788431] [<c0260eec>] (worker_thread) from [<c0266568>] (kthread+0xd8/0xf0) [ 1.795658] [<c0266568>] (kthread) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 1.802878] ---[ end trace d1b08ec90b6d2555 ]--- [ 1.807501] ohci-platform 1c1c400.usb: can't setup: -12 [ 1.812738] ohci-platform 1c1c400.usb: USB bus 1 deregistered [ 1.818524] ohci-platform: probe of 1c1c400.usb failed with error -12 [ 1.825631] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.899036] stmmac_open: DMA descriptors allocation failed [ 1.904664] IP-Config: Failed to open eth0 [ 1.908758] IP-Config: No network devices available [ 1.913667] usb2-vbus: disabling [ 1.916909] usb1-vbus: disabling [ 1.920141] ahci-5v: disabling [ 1.923192] vcc3v3: disabling [ 1.926164] vcc3v0: disabling [ 1.929252] ALSA device list: [ 1.932215] No soundcards found. ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.893685] usb1-vbus: 5000 mV [ 0.897207] usb2-vbus: 5000 mV [ 0.966015] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973500] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979392] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988360] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.997267] scsi0 : ahci_platform [ 1.000925] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.009152] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014753] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022610] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.046043] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.053015] hub 1-0:1.0: USB hub found [ 1.056862] hub 1-0:1.0: 1 port detected [ 1.061364] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.067012] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074839] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095978] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102867] hub 2-0:1.0: USB hub found [ 1.106697] hub 2-0:1.0: 1 port detected [ 1.111130] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117804] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125631] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190799] hub 3-0:1.0: USB hub found [ 1.194585] hub 3-0:1.0: 1 port detected [ 1.199089] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205731] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213589] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280797] hub 4-0:1.0: USB hub found [ 1.284581] hub 4-0:1.0: 1 port detected [ 1.288960] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.376009] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392325] No MAC Management Counters available [ 1.397094] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403697] IP-Config: Failed to open eth0 [ 1.407823] IP-Config: No network devices available [ 1.412721] vcc3v3: disabling [ 1.415687] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubox-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.105656] orion-ehci: probe of f1051000.usb-host failed with error -12 [ 1.112403] SPEAr-ehci: EHCI SPEAr driver [ 1.116507] tegra-ehci: Tegra EHCI driver [ 1.120619] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.126801] ohci-pci: OHCI PCI platform driver [ 1.131302] ohci-platform: OHCI generic platform driver [ 1.136618] ohci-omap3: OHCI OMAP3 driver [ 1.140716] SPEAr-ohci: OHCI SPEAr driver [ 1.145383] usbcore: registered new interface driver usb-storage [ 1.152898] mousedev: PS/2 mouse device common for all mice [ 1.159890] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.169233] i2c /dev entries driver [ 1.174616] usbcore: registered new interface driver uvcvideo [ 1.180366] USB Video Class driver (1.1.1) [ 1.184459] gspca_main: v2.14.0 registered [ 1.191741] orion_wdt: Initial timeout 25 sec [ 1.197232] sdhci: Secure Digital Host Controller Interface driver [ 1.203403] sdhci: Copyright(c) Pierre Ossman [ 1.208468] Synopsys Designware Multimedia Card Interface Driver [ 1.214848] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.221269] usbcore: registered new interface driver usbhid [ 1.226832] usbhid: USB HID core driver [ 1.234066] TCP: cubic registered [ 1.237376] NET: Registered protocol family 17 [ 1.241841] can: controller area network core (rev 20120528 abi 9) [ 1.248077] NET: Registered protocol family 29 [ 1.252503] can: raw protocol (rev 20120528) [ 1.256768] can: broadcast manager protocol (rev 20120528 t) [ 1.262420] can: netlink gateway (rev 20130117) max_hops=1 [ 1.268286] Key type dns_resolver registered [ 1.272738] ThumbEE CPU extension supported. [ 1.277030] Registering SWP/SWPB emulation handler [ 1.281814] PJ4 iWMMXt v2 coprocessor enabled. [ 1.287385] USB Power: 5000 mV [ 1.290942] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-02 10:23:20 UTC (1401704600) [ 1.301475] ALSA device list: [ 1.304451] No soundcards found. [ 1.308371] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
[<80358958>] (device_add) from [<8035cc44>] (platform_device_add+0xb4/0x218) r9:00000000 r8:9e527e80 r7:00000002 r6:9e73ac10 r5:9e73ac00 r4:00000002 [<8035cb90>] (platform_device_add) from [<80441050>] (ci_hdrc_add_device+0x1a0/0x1c8) r7:00000002 r6:9e475d7c r5:00000000 r4:00000000 [<80440eb0>] (ci_hdrc_add_device) from [<804454ac>] (ci_hdrc_imx_probe+0x1d0/0x2d0) r10:00000000 r9:00000000 r8:806c231c r7:00000000 r6:9e722c10 r5:9e53f000 r4:9e53f010 r3:9e475d7c [<804452dc>] (ci_hdrc_imx_probe) from [<8035cef8>] (platform_drv_probe+0x20/0x50) r9:00000000 r8:8094eea0 r7:00000000 r6:00000000 r5:8094eea0 r4:9e53f010 [<8035ced8>] (platform_drv_probe) from [<8035b57c>] (driver_probe_device+0x10c/0x244) r5:9e53f010 r4:81174114 [<8035b470>] (driver_probe_device) from [<8035b79c>] (__driver_attach+0x9c/0xa0) r9:9e724cc0 r8:808f9884 r7:00000000 r6:9e53f044 r5:8094eea0 r4:9e53f010 [<8035b700>] (__driver_attach) from [<803599d8>] (bus_for_each_dev+0x68/0x9c) r6:8035b700 r5:8094eea0 r4:00000000 r3:00000000 [<80359970>] (bus_for_each_dev) from [<8035b070>] (driver_attach+0x20/0x28) r6:8093d710 r5:9e721c80 r4:8094eea0 [<8035b050>] (driver_attach) from [<8035ad1c>] (bus_add_driver+0x148/0x1f4) [<8035abd4>] (bus_add_driver) from [<8035bdec>] (driver_register+0x80/0x100) r7:9e474000 r6:808e8114 r5:80915d60 r4:8094eea0 [<8035bd6c>] (driver_register) from [<8035cec4>] (__platform_driver_register+0x50/0x64) r5:80915d60 r4:80915d60 [<8035ce74>] (__platform_driver_register) from [<808e812c>] (ci_hdrc_imx_driver_init+0x18/0x20) [<808e8114>] (ci_hdrc_imx_driver_init) from [<800089bc>] (do_one_initcall+0x88/0x1dc) [<80008934>] (do_one_initcall) from [<808b7d60>] (kernel_init_freeable+0x10c/0x1d0) r10:808f9890 r9:000000c4 r8:808f9884 r7:8096f680 r6:8096f680 r5:00000006 r4:80905d80 [<808b7c54>] (kernel_init_freeable) from [<80670db0>] (kernel_init+0x10/0xf4) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80670da0 r4:00000000 [<80670da0>] (kernel_init) from [<8000eb48>] (ret_from_fork+0x14/0x2c) r4:00000000 r3:ffffffff Code: e5913080 e3530000 e2400030 0a000008 (e5933000) ---[ end trace 60b4474b893bcf0b ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
~$off # PYBOOT: Exception: panic
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.900181] Modules linked in: [ 1.903259] CPU: 0 PID: 82 Comm: mountkernfs.sh Not tainted 3.15.0-rc7-next-20140602 #1 [ 1.911268] task: db425680 ti: db456000 task.ti: db456000 [ 1.916671] PC is at 0x0 [ 1.919219] LR is at call_timer_fn.isra.33+0x24/0x88 [ 1.924187] pc : [<00000000>] lr : [<c0255a04>] psr: 60000113 [ 1.924187] sp : db457ed8 ip : 00000000 fp : c0c62280 [ 1.935666] r10: c0c62e98 r9 : c0c62c98 r8 : 00000000 [ 1.940894] r7 : db456018 r6 : 00000100 r5 : db456000 r4 : db457ef8 [ 1.947421] r3 : db457ed8 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 1.953953] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 1.961090] Control: 10c5387d Table: 2b44c059 DAC: 00000015 [ 1.966838] Process mountkernfs.sh (pid: 82, stack limit = 0xdb456250) [ 1.973368] Stack: (0xdb457ed8 to 0xdb458000) [ 1.977731] 7ec0: c0b7c318 dbbb13b8 [ 1.985913] 7ee0: db457ef8 00200200 00000000 c0b820c0 c0c62a98 c0255c28 db085edc db085edc [ 1.994097] 7f00: db457ef4 00000080 c0b82084 c0b82080 db456000 40000001 c0b82080 00000001 [ 2.002278] 7f20: 00000100 c024f7fc c0c5eeb0 c028979c c0b7c4a0 db456028 0000000a c0c61f40 [ 2.010461] 7f40: db456000 db456028 c0b820c0 ffff1718 c0821060 00400040 0002c444 db456000 [ 2.018644] 7f60: 00000057 00000000 f4000100 0002c44c 00000000 0002c46c 0002c444 c024fbd4 [ 2.026826] 7f80: c0b7cc68 c020f000 f400010c c0b88908 db457fb0 c0208908 b6eab81c 00010d02 [ 2.035009] 7fa0: 80000030 ffffffff 0002c444 c021293c b6eab81c 0002c464 b6f66afc 80000000 [ 2.043192] 7fc0: 00000000 00037206 00037207 0002c444 0002c44c 00000000 0002c46c 0002c444 [ 2.051373] 7fe0: 0001f1e4 beb1faf0 00010d0f 00010d02 80000030 ffffffff ffffffff ffffffff [ 2.059569] [<c0255a04>] (call_timer_fn.isra.33) from [<c0255c28>] (run_timer_softirq+0x1c0/0x23c) [ 2.068539] [<c0255c28>] (run_timer_softirq) from [<c024f7fc>] (__do_softirq+0x120/0x274) [ 2.076726] [<c024f7fc>] (__do_softirq) from [<c024fbd4>] (irq_exit+0xac/0xf4) [ 2.083960] [<c024fbd4>] (irq_exit) from [<c020f000>] (handle_IRQ+0x44/0x90) [ 2.091018] [<c020f000>] (handle_IRQ) from [<c0208908>] (gic_handle_irq+0x38/0x68) [ 2.098596] [<c0208908>] (gic_handle_irq) from [<c021293c>] (__irq_usr+0x3c/0x60) [ 2.106081] Exception stack(0xdb457fb0 to 0xdb457ff8) [ 2.111136] 7fa0: b6eab81c 0002c464 b6f66afc 80000000 [ 2.119319] 7fc0: 00000000 00037206 00037207 0002c444 0002c44c 00000000 0002c46c 0002c444 [ 2.127499] 7fe0: 0001f1e4 beb1faf0 00010d0f 00010d02 80000030 ffffffff [ 2.134116] Code: bad PC value [ 2.137202] ---[ end trace 98a2778dd14e2955 ]--- [ 2.141837] Kernel panic - not syncing: Fatal exception in interrupt [ 2.148197] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: panic
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 47.511435] can: raw protocol (rev 20120528) [ 47.511442] can: broadcast manager protocol (rev 20120528 t) [ 47.511453] can: netlink gateway (rev 20130117) max_hops=1 [ 47.511749] Key type dns_resolver registered [ 47.511820] omap_vc_init_channel: No PMIC info for vdd_core [ 47.511822] omap_vp_init: No PMIC info for vdd_core [ 47.511826] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.511827] omap_vp_init: No PMIC info for vdd_mm [ 47.511831] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.511833] omap_vp_init: No PMIC info for vdd_mpu [ 47.512147] ThumbEE CPU extension supported. [ 47.512162] Registering SWP/SWPB emulation handler [ 47.517594] palmas 0-0048: Irq flag is 0x00000000 [ 47.595101] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.601866] mmc0: new high speed MMC card at address 0001 [ 47.607759] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.612585] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.618852] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.625736] mmcblk0: unknown partition table [ 47.625743] smps123: 600 <--> 1500 mV at 1060 mV [ 47.636122] mmcblk0boot1: unknown partition table [ 47.641390] smps45: 600 <--> 1310 mV at 1030 mV [ 47.641904] mmcblk0boot0: unknown partition table [ 47.652819] smps6: 1200 mV [ 47.656787] smps7: 1800 mV [ 47.660893] smps8: 600 <--> 1310 mV at 1040 mV [ 47.666625] smps9: failed to get the current voltage [ 47.671875] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.683918] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.811868] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.956877] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.962958] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.970407] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.977263] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.984977] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.998417] ALSA device list: [ 48.001514] No soundcards found. [ 48.005524] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.961283] can: raw protocol (rev 20120528) [ 47.961290] can: broadcast manager protocol (rev 20120528 t) [ 47.961302] can: netlink gateway (rev 20130117) max_hops=1 [ 47.961619] Key type dns_resolver registered [ 47.961695] omap_vc_init_channel: No PMIC info for vdd_core [ 47.961697] omap_vp_init: No PMIC info for vdd_core [ 47.961701] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.961703] omap_vp_init: No PMIC info for vdd_mm [ 47.961706] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.961708] omap_vp_init: No PMIC info for vdd_mpu [ 47.962013] ThumbEE CPU extension supported. [ 47.962027] Registering SWP/SWPB emulation handler [ 47.967397] palmas 0-0048: Irq flag is 0x00000000 [ 48.044983] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.051731] mmc0: new high speed MMC card at address 0001 [ 48.057609] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.062435] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.068696] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.075572] smps123: 600 <--> 1500 mV at 1060 mV [ 48.075578] mmcblk0: unknown partition table [ 48.076349] mmcblk0boot1: unknown partition table [ 48.077117] mmcblk0boot0: unknown partition table [ 48.096299] smps45: 600 <--> 1310 mV at 1030 mV [ 48.102783] smps6: 1200 mV [ 48.106739] smps7: 1800 mV [ 48.110843] smps8: 600 <--> 1310 mV at 1040 mV [ 48.116574] smps9: failed to get the current voltage [ 48.121827] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.133887] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.261692] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.406701] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.412788] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.420233] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.427090] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.434805] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.448263] ALSA device list: [ 48.451360] No soundcards found. [ 48.455357] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------
[ 1.972616] Key type dns_resolver registered [ 1.972729] omap_vc_init_channel: No PMIC info for vdd_core [ 1.972733] omap_vp_init: No PMIC info for vdd_core [ 1.972742] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.972746] omap_vp_init: No PMIC info for vdd_mm [ 1.972755] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.972758] omap_vp_init: No PMIC info for vdd_mpu [ 1.973321] ThumbEE CPU extension supported. [ 1.973344] Registering SWP/SWPB emulation handler [ 1.973354] SmartReflex Class3 initialized [ 2.017050] palmas 0-0048: Irq flag is 0x00000000 [ 2.034558] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.041062] mmc0: new high speed MMC card at address 0001 [ 2.048858] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.053844] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.060381] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.069289] mmcblk0: unknown partition table [ 2.076506] mmcblk0boot1: unknown partition table [ 2.083351] mmcblk0boot0: unknown partition table [ 2.113159] smps123: 600 <--> 1500 mV at 1060 mV [ 2.120172] smps45: 600 <--> 1310 mV at 1030 mV [ 2.127489] smps6: 1200 mV [ 2.132219] smps7: 1800 mV [ 2.137107] smps8: 600 <--> 1310 mV at 1040 mV [ 2.143564] smps9: failed to get the current voltage [ 2.149484] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.163812] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.172650] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.180587] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.186645] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.195797] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.205178] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.212139] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.220623] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.229265] sr_init: No PMIC hook to init smartreflex [ 2.234778] sr_init: platform driver register failed for SR [ 2.262969] pbias_mmc_omap5: disabling [ 2.268496] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2889.813762] CPU: Virtualization extensions available. [ 2889.814002] devtmpfs: initialized [ 2889.815952] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.816139] pinctrl core: initialized pinctrl subsystem [ 2889.816340] regulator-dummy: no parameters [ 2889.822300] NET: Registered protocol family 16 [ 2889.822405] DMA: failed to allocate 256 KiB pool for atomic coherent allocation [ 2889.823115] cpuidle: using governor ladder [ 2889.823123] cpuidle: using governor menu [ 2889.828172] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.832031] No ATAGs? [ 2889.832050] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.832055] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.832151] EXYNOS5250 PMU Initialize [ 2889.833359] Serial: AMBA PL011 UART driver [ 2920.594296] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594308] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594598] vbat-supply: no parameters [ 2920.594742] P5.0V_USB3CON: 5000 mV [ 2920.595857] vgaarb: loaded [ 2920.596147] SCSI subsystem initialized [ 2920.596229] libata version 3.00 loaded. [ 2920.596374] usbcore: registered new interface driver usbfs [ 2920.596404] usbcore: registered new interface driver hub [ 2920.596453] usbcore: registered new device driver usb [ 2920.596861] Linux video capture interface: v2.00 [ 2920.596883] pps_core: LinuxPPS API ver. 1 registered [ 2920.596887] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 2920.596900] PTP clock support registered [ 2920.596938] EDAC MC: Ver: 3.0.0 [ 2920.597303] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597755] Switched to clocksource arch_sys_counter [ 2920.602004] NET: Registered protocol family 2 [ 2920.602202] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602240] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602313] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602342] TCP: reno registered [ 2920.602349] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602366] UDP-Lite hash table entri~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-multi_v7_defconfig failure log: -------------------------------------------------
[ 2889.850918] NET: Registered protocol family 16 [ 2889.851025] DMA: failed to allocate 256 KiB pool for atomic coherent allocation [ 2889.851725] cpuidle: using governor ladder [ 2889.851733] cpuidle: using governor menu [ 2889.856772] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.860612] No ATAGs? [ 2889.860629] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.860634] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.860730] EXYNOS5250 PMU Initialize [ 2889.861933] Serial: AMBA PL011 UART driver [ 2920.594282] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594294] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594580] vbat-supply: no parameters [ 2920.594718] P5.0V_USB3CON: 5000 mV [ 2920.595829] vgaarb: loaded [ 2920.596121] SCSI subsystem initialized [ 2920.596202] libata version 3.00 loaded. [ 2920.596348] usbcore: registered new interface driver usbfs [ 2920.596377] usbcore: registered new interface driver hub [ 2920.596427] usbcore: registered new device driver usb [ 2920.596841] Linux video capture interface: v2.00 [ 2920.596862] pps_core: LinuxPPS API ver. 1 registered [ 2920.596866] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 2920.596880] PTP clock support registered [ 2920.596918] EDAC MC: Ver: 3.0.0 [ 2920.597281] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597735] Switched to clocksource arch_sys_counter [ 2920.602012] NET: Registered protocol family 2 [ 2920.602216] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602253] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602326] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602354] TCP: reno registered [ 2920.602361] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602378] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602457] NET: Registered protocol family 1 [ 2920.602611] RPC: Registered named UNIX socket transport module. [ 2920.602616] RPC: Registered udp transport module. [ 2920.602620] RPC: Registered tcp transport module. [ 2920.~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log: -------------------------------------------------
[ 3.627319] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635253] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647186] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654510] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665985] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674499] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686401] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693725] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705200] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.713012] HS USB OTG: no transceiver configured [ 3.717712] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725585] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733489] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745422] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752746] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764221] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772766] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784667] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791992] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803466] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811279] HS USB OTG: no transceiver configured [ 3.816009] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823852] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831787] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843688] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.851013] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862487] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.871032] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882934] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890258] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901733] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909545] HS USB OTG: no transceiver configured [ 3.914245] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922088] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.930023] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941925] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949249] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960723] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.565744] tlv320aic23-codec 2-001a: ASoC: Failed to set cache compression type: -22 [ 1.573603] tegra-snd-trimslice sound: snd_soc_register_card failed (-22) [ 1.580402] tegra-snd-trimslice: probe of sound failed with error -22 [ 1.587266] TCP: cubic registered [ 1.590601] NET: Registered protocol family 17 [ 1.595058] can: controller area network core (rev 20120528 abi 9) [ 1.601293] NET: Registered protocol family 29 [ 1.605752] can: raw protocol (rev 20120528) [ 1.610024] can: broadcast manager protocol (rev 20120528 t) [ 1.615695] can: netlink gateway (rev 20130117) max_hops=1 [ 1.621462] Key type dns_resolver registered [ 1.625970] ThumbEE CPU extension supported. [ 1.630254] Registering SWP/SWPB emulation handler [ 1.636435] usb1_vbus: 5000 mV [ 1.640131] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 1.665236] tegra-ehci c5004000.usb: EHCI Host Controller [ 1.670651] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 1.679284] tegra-ehci c5004000.usb: can't setup: -12 [ 1.684337] tegra-ehci c5004000.usb: USB bus 1 deregistered [ 1.689909] tegra-ehci c5004000.usb: Failed to add USB HCD [ 1.695408] tegra-ehci: probe of c5004000.usb failed with error -12 [ 1.704768] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.710179] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1 [ 1.719330] tegra-ehci c5008000.usb: can't setup: -12 [ 1.724399] tegra-ehci c5008000.usb: USB bus 1 deregistered [ 1.729986] tegra-ehci c5008000.usb: Failed to add USB HCD [ 1.735497] tegra-ehci: probe of c5008000.usb failed with error -12 [ 1.746834] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.752261] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 1.759861] tegra-ehci c5000000.usb: can't setup: -12 [ 1.764925] tegra-ehci c5000000.usb: USB bus 1 deregistered [ 1.770509] tegra-ehci c5000000.usb: Failed to add USB HCD [ 1.776019] tegra-ehci: probe of c5000000.usb failed with error -12 [ 1.783282] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.790321] rtc-em3027 2-0056: setting system clock to 2014-06-02 10:24:22 UTC (1401704662) [ 1.803239] ALSA device list: [ 1.806229] No soundcards found. [ 1.810301] Waiting for root device /dev/sda1... ~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-tegra_defconfig failure log: -------------------------------------------------
[ 1.796749] NET: Registered protocol family 15 [ 1.801227] can: controller area network core (rev 20120528 abi 9) [ 1.807690] NET: Registered protocol family 29 [ 1.812171] can: raw protocol (rev 20120528) [ 1.816444] can: broadcast manager protocol (rev 20120528 t) [ 1.822149] can: netlink gateway (rev 20130117) max_hops=1 [ 1.827880] Bluetooth: RFCOMM socket layer initialized [ 1.833058] Bluetooth: RFCOMM ver 1.11 [ 1.836828] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.842174] Bluetooth: BNEP socket layer initialized [ 1.847140] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.853090] Bluetooth: HIDP socket layer initialized [ 1.859433] Registering SWP/SWPB emulation handler [ 1.867116] usb1_vbus: 5000 mV [ 1.870885] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 1.918329] tegra-ehci c5004000.usb: EHCI Host Controller [ 1.923776] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 1.931477] tegra-ehci c5004000.usb: can't setup: -12 [ 1.936528] tegra-ehci c5004000.usb: USB bus 1 deregistered [ 1.942125] tegra-ehci c5004000.usb: Failed to add USB HCD [ 1.947635] tegra-ehci: probe of c5004000.usb failed with error -12 [ 1.958059] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.963505] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1 [ 1.971115] tegra-ehci c5008000.usb: can't setup: -12 [ 1.976160] tegra-ehci c5008000.usb: USB bus 1 deregistered [ 1.981745] tegra-ehci c5008000.usb: Failed to add USB HCD [ 1.987241] tegra-ehci: probe of c5008000.usb failed with error -12 [ 1.997689] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.003135] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 2.010761] tegra-ehci c5000000.usb: can't setup: -12 [ 2.015806] tegra-ehci c5000000.usb: USB bus 1 deregistered [ 2.021416] tegra-ehci c5000000.usb: Failed to add USB HCD [ 2.026914] tegra-ehci: probe of c5000000.usb failed with error -12 [ 2.034399] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.041867] rtc-em3027 2-0056: setting system clock to 2014-06-02 10:22:29 UTC (1401704549) [ 2.058953] ALSA device list: [ 2.061915] No soundcards found. [ 2.065830] Waiting for root device /dev/sda1... ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log: -------------------------------------------------
[<8067724c>] (dump_stack) from [<8001572c>] (handle_IPI+0x14c/0x178) r6:80907e2c r5:80912d2c r4:00000000 r3:80923498 [<800155e0>] (handle_IPI) from [<800086fc>] (gic_handle_irq+0x60/0x68) r8:00000000 r7:f4000100 r6:8090bf18 r5:80912e9c r4:f400010c r3:01400000 [<8000869c>] (gic_handle_irq) from [<80013264>] (__irq_svc+0x44/0x5c) Exception stack(0x8090bf18 to 0x8090bf60) bf00: 8000f750 8090bf28 bf20: 00000000 00000000 8090a000 8091298c 80912938 8096f443 00000000 8090a000 bf40: 80682664 8090bf6c 8090bf50 8090bf60 80066348 8000f754 60000013 ffffffff r7:8090bf4c r6:ffffffff r5:60000013 r4:8000f754 [<8000f72c>] (arch_cpu_idle) from [<80061ac8>] (cpu_startup_entry+0x114/0x180) [<800619b4>] (cpu_startup_entry) from [<80670d78>] (rest_init+0xb0/0xd8) r7:808f9a80 [<80670cc8>] (rest_init) from [<808b7bf0>] (start_kernel+0x33c/0x3a0) r5:8096f680 r4:80912a30 [<808b78b4>] (start_kernel) from [<10008074>] (0x10008074) CPU2: stopping CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-rc7-next-20140602 #1 Backtrace: [<80012418>] (dump_backtrace) from [<800126fc>] (show_stack+0x18/0x1c) r6:8092fae0 r5:8092fae0 r4:00000000 r3:00000000 [<800126e4>] (show_stack) from [<806772d8>] (dump_stack+0x8c/0xa4) [<8067724c>] (dump_stack) from [<8001572c>] (handle_IPI+0x14c/0x178) r6:80907e2c r5:80912d2c r4:00000002 r3:80923498 [<800155e0>] (handle_IPI) from [<800086fc>] (gic_handle_irq+0x60/0x68) r8:00000000 r7:f4000100 r6:ed0b1f68 r5:80912e9c r4:f400010c r3:01400000 [<8000869c>] (gic_handle_irq) from [<80013264>] (__irq_svc+0x44/0x5c) Exception stack(0xed0b1f68 to 0xed0b1fb0) 1f60: 8000f750 ed0b1f78 00000000 00000000 ed0b0000 8091298c 1f80: 80912938 8096f443 00000000 ed0b0000 80682664 ed0b1fbc ed0b1fa0 ed0b1fb0 1fa0: 80066348 8000f754 60000013 ffffffff r7:ed0b1f9c r6:ffffffff r5:60000013 r4:8000f754 [<8000f72c>] (arch_cpu_idle) from [<80061ac8>] (cpu_startup_entry+0x114/0x180) [<800619b4>] (cpu_startup_entry) from [<80015374>] (secondary_start_kernel+0x144/0x164) r7:8096f998 [<80015230>] (secondary_start_kernel) from [<100087a4>] (0x100087a4) r5:00000015 r4:7d09406a ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: panic
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.455881] df60: 00000000 c0b8f0d4 c0b8f0d4 0000004c 8eead0f6 00000000 8ef4e8c5 00000000 [ 2.464064] df80: ea7a7da8 c0b7cda0 00000000 00000000 0000001b e989dfa8 c06b2460 c06b246c [ 2.472243] dfa0: 60000013 ffffffff [ 2.475747] [<c02127c0>] (__irq_svc) from [<c06b246c>] (cpuidle_enter_state+0x68/0x100) [ 2.483768] [<c06b246c>] (cpuidle_enter_state) from [<c027f1f0>] (cpu_startup_entry+0x208/0x22c) [ 2.492564] [<c027f1f0>] (cpu_startup_entry) from [<10208a84>] (0x10208a84) [ 2.499530] CPU3: stopping [ 2.502247] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-rc7-next-20140602 #1 [ 2.510794] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.518550] [<c0211c68>] (show_stack) from [<c0813dfc>] (dump_stack+0x88/0x98) [ 2.525781] [<c0813dfc>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.533184] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.540760] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.548245] Exception stack(0xe989ff60 to 0xe989ffa8) [ 2.553303] ff60: 00000000 c0b8f0d4 c0b8f0d4 0000004c 8eeaceb6 00000000 8ef4e910 00000000 [ 2.561487] ff80: ea7afda8 c0b7cda0 00000000 00000000 0000001b e989ffa8 c06b2460 c06b246c [ 2.569666] ffa0: 60000013 ffffffff [ 2.573164] [<c02127c0>] (__irq_svc) from [<c06b246c>] (cpuidle_enter_state+0x68/0x100) [ 2.581178] [<c06b246c>] (cpuidle_enter_state) from [<c027f1f0>] (cpu_startup_entry+0x208/0x22c) [ 2.589971] [<c027f1f0>] (cpu_startup_entry) from [<10208a84>] (0x10208a84) [ 2.596936] CPU0: stopping [ 2.599654] CPU: 0 PID: 171 Comm: udevd Tainted: G D 3.15.0-rc7-next-20140602 #1 [ 2.608023] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.615780] [<c0211c68>] (show_stack) from [<c0813dfc>] (dump_stack+0x88/0x98) [ 2.623012] [<c0813dfc>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.630415] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.637992] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.645476] Exception stack(0xe9f3de78 to 0xe9f3dec0) [ 2.650531] de60: e9c35010 a0000013 [ 2.658715] de80: 00000221 00000173 e9c8fa00 00000000 0000224c 00002250 e9de0000 e9f3c000 [ 2.666898] dea0: e9de0000 c0831be4 e9c8fb78 e9f3dec0 c04be370 c0819288 a0000013 ffffffff [ 2.675085] [<c02127c0>] (__irq_svc) from [<c0819288>] (_raw_spin_unlock_irqrestore+0x1c/0x20) [ 2.683714] [<c0819288>] (_raw_spin_unlock_irqrestore) from [<c04be370>] (n_tty_write+0x24c/0x508) [ 2.692684] [<c04be370>] (n_tty_write) from [<c04bb1e4>] (tty_write+0xfc/0x25c) [ 2.700010] [<c04bb1e4>] (tty_write) from [<c02f3938>] (vfs_write+0xa4/0x1b0) [ 2.707157] [<c02f3938>] (vfs_write) from [<c02f3f54>] (SyS_write+0x40/0x94) [ 2.714214] [<c02f3f54>] (SyS_write) from [<c020e720>] (ret_fast_syscall+0x0/0x30) [ 2.721791] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: panic
kernel-build-reports@lists.linaro.org
-
Olof's autobooter