Failed boards:
bbb multi_v7_defconfig : FAILED 3:17.22 beaver multi_v7_defconfig : FAILED 0:28.67 capri multi_v7_defconfig : FAILED 2:58.66 cubie sunxi_defconfig : FAILED 1:00.68 cubie multi_v7_defconfig : FAILED 1:11.60 cubie2 sunxi_defconfig : FAILED 0:58.43 cubie2 multi_v7_defconfig : FAILED 1:04.60 cubie2 multi_lpae_defconfig : FAILED 1:02.95 omap5uevm multi_v7_defconfig : FAILED 3:49.70 omap5uevm multi_lpae_defconfig : FAILED 1:21.91 panda multi_v7_defconfig : FAILED 3:14.23 seaboard multi_v7_defconfig : FAILED 3:01.50 snow exynos_defconfig : FAILED 1:31.33 snowball multi_v7_defconfig : FAILED 1:10.18 trimslice multi_v7_defconfig : FAILED 0:38.49 wandboard multi_v7_defconfig : FAILED 3:06.39
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:13.29 arndale exynos_defconfig : passed 1:01.74 bbb omap2plus_defconfig : passed 1:31.73 beaver tegra_defconfig : passed 0:52.70 capri bcm_defconfig : passed 0:43.24 panda omap2plus_defconfig : passed 1:19.27 sama5 sama5_defconfig : passed 1:57.91 seaboard tegra_defconfig : passed 1:02.15 snowball u8500_defconfig : passed 1:25.16 trimslice tegra_defconfig : passed 1:04.89 wandboard imx_v6_v7_defconfig : passed 0:57.85
Offline boards:
dalmore tegra_defconfig : OFFLINE 1:03.74 dalmore multi_v7_defconfig : OFFLINE 1:03.70 dalmore multi_lpae_defconfig : OFFLINE 1:03.70 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.70 hummingboard multi_v7_defconfig : OFFLINE 1:03.71 omap5uevm omap2plus_defconfig : OFFLINE 2:27.83
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.215937] sdhci: Secure Digital Host Controller Interface driver [ 1.222549] sdhci: Copyright(c) Pierre Ossman [ 1.228322] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.266869] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.306922] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.313923] usbcore: registered new interface driver usbhid [ 1.319859] usbhid: USB HID core driver [ 1.328961] TCP: cubic registered [ 1.332473] NET: Registered protocol family 17 [ 1.337570] Key type dns_resolver registered [ 1.342983] ThumbEE CPU extension supported. [ 1.347591] Registering SWP/SWPB emulation handler [ 1.352645] PJ4 iWMMXt coprocessor enabled. [ 1.364628] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.419542] mmc1: BKOPS_EN bit is not set [ 1.426231] mmc1: new high speed MMC card at address 0001 [ 1.432786] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.437959] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.444391] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.451391] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.458212] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.465551] libphy: 4a101000.mdio: probed [ 1.469902] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.479596] Detected MACID = bc:6a:29:7a:42:a8 [ 1.485797] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.494618] spear_cpufreq: Invalid cpufreq_tbl [ 1.504350] ALSA device list: [ 1.507761] No soundcards found. [ 1.512643] mmcblk0: p1 p2 [ 1.518562] mmcblk0boot1: unknown partition table [ 1.525448] mmcblk0boot0: unknown partition table [ 1.532747] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.542688] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.669883] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.678535] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.706437] devtmpfs: mounted [ 1.710535] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.785325] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
[ 5.611441] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.619689] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.626632] CPU1: stopping [ 5.629332] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc5-01080-ge61512a #1 [ 5.637842] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 5.645570] [<c0211724>] (show_stack) from [<c07a7be8>] (dump_stack+0x84/0x94) [ 5.652775] [<c07a7be8>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 5.660153] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 5.667705] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 5.675166] Exception stack(0xec8bbf50 to 0xec8bbf98) [ 5.680202] bf40: ec8bbf98 00000003 484be260 00000001 [ 5.688359] bf60: e3503af0 00000000 ed7c5de8 c0b05728 00000001 00000000 c0b8000b ec8ba000 [ 5.696516] bf80: 00000015 ec8bbf98 c028d8f4 c065c314 60000113 ffffffff [ 5.703116] [<c0212280>] (__irq_svc) from [<c065c314>] (cpuidle_enter_state+0x50/0xe0) [ 5.711013] [<c065c314>] (cpuidle_enter_state) from [<c065c470>] (cpuidle_idle_call+0xcc/0x168) [ 5.719691] [<c065c470>] (cpuidle_idle_call) from [<c020f220>] (arch_cpu_idle+0x8/0x44) [ 5.727677] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.735922] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.742865] CPU3: stopping [ 5.745564] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.14.0-rc5-01080-ge61512a #1 [ 5.754075] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 5.761803] [<c0211724>] (show_stack) from [<c07a7be8>] (dump_stack+0x84/0x94) [ 5.769009] [<c07a7be8>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 5.776386] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 5.783938] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 5.791400] Exception stack(0xec8bff50 to 0xec8bff98) [ 5.796436] ff40: ec8bff98 00000003 484bea30 00000001 [ 5.804594] ff60: e520c8b8 00000000 ed7d5de8 c0b05728 00000001 00000000 c0b8000b ec8be000 [ 5.812750] ff80: 00000015 ec8bff98 c028d8f4 c065c314 60000113 ffffffff [ 5.819349] [<c0212280>] (__irq_svc) from [<c065c314>] (cpuidle_enter_state+0x50/0xe0) [ 5.827247] [<c065c314>] (cpuidle_enter_state) from [<c065c470>] (cpuidle_idle_call+0xcc/0x168) [ 5.835926] [<c065c470>] (cpuidle_idle_call) from [<c020f220>] (arch_cpu_idle+0x8/0x44) [ 5.843911] [<c020f220>] (arch_cpu_idle) from [<c0282aa0>] (cpu_startup_entry+0x100/0x144) [ 5.852155] [<c0282aa0>] (cpu_startup_entry) from [<80208a44>] (0x80208a44) [ 5.859099] drm_kms_helper: panic occurred, switching back to text console [ 5.865993] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 5.874062] pgd = c0204000 [ 5.876756] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.650000] sdhci: Secure Digital Host Controller Interface driver [ 0.660000] sdhci: Copyright(c) Pierre Ossman [ 0.660000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.690000] mmc0: no vqmmc regulator found [ 0.690000] mmc0: no vmmc regulator found [ 0.750000] mmc0: SDHCI controller on 3f190000.sdio [3f190000.sdio] using ADMA [ 0.750000] sdhci-kona 3f1b0000.sdio: Got CD GPIO #14. [ 0.780000] mmc1: no vqmmc regulator found [ 0.780000] mmc1: no vmmc regulator found [ 0.830000] mmc1: SDHCI controller on 3f1b0000.sdio [3f1b0000.sdio] using ADMA [ 0.830000] usbcore: registered new interface driver usbhid [ 0.840000] usbhid: USB HID core driver [ 0.840000] TCP: cubic registered [ 0.840000] NET: Registered protocol family 17 [ 0.850000] Key type dns_resolver registered [ 0.850000] ThumbEE CPU extension supported. [ 0.850000] Registering SWP/SWPB emulation handler [ 0.860000] PJ4 iWMMXt coprocessor enabled. [ 0.860000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.870000] spear_cpufreq: No cpu node found [ 0.870000] ALSA device list: [ 0.870000] No soundcards found. [ 0.880000] Waiting for root device /dev/mmcblk0p8... [ 0.890000] mmc0: BKOPS_EN bit is not set [ 0.900000] mmc0: new high speed MMC card at address 0001 [ 0.910000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.910000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.920000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.920000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.930000] Alternate GPT is invalid, using primary GPT. [ 0.930000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.940000] mmcblk0boot1: unknown partition table [ 0.940000] mmcblk0boot0: unknown partition table [ 0.990000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.000000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.000000] devtmpfs: mounted [ 1.010000] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.030000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 arm-soc/v3.14-node: cubie status: on rc5-1080-ge61512a/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4539536 (454490 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 301.8 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454490 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log: -------------------------------------------------
DHCP client bound to address 172.16.1.140 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.4 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.140 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 643.6 KiB/s done Bytes transferred = 15168 (3b40 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb3f ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #############################node: cubie2 status: on ###################### 3.9 MiB/s done Bytes transferred = 4564688 (45a6d0 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 935.5 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45a6d0 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 4 MiB/s done Bytes transferred = 4539536 (454490 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 467.8 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 node: cubie2 status: on bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x454490 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1node: cubie2 status: on .3 sun7i# tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage tftp 0x40008000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 4 MiB/s done Bytes transferred = 1780312 (1b2a58 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.156 Filename 'arm-soc/v3.14-rc5-1080-ge61512a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 573.2 KiB/s done Bytes transferred = 18205 (471d hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b2a58 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff71c ... OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 49.087540] [<c0218154>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 49.095535] [<c020840c>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 49.103255] Exception stack(0xec8a5e40 to 0xec8a5e88) [ 49.108524] 5e40: 40000193 00000000 7466615c 40000193 74666158 7466615c 00000205 c098959c [ 49.117064] 5e60: 7466615c 74666158 00000028 ec8a5f70 ec8a5f70 ec8a5e88 c027e1c8 c07b3ebc [ 49.125595] 5e80: 40000193 ffffffff [ 49.129240] [<c0212218>] (__dabt_svc) from [<c07b3ebc>] (_raw_spin_lock_irqsave+0x10/0x4c) [ 49.137871] [<c07b3ebc>] (_raw_spin_lock_irqsave) from [<c027e1c8>] (__down_read_trylock+0x14/0x54) [ 49.147323] [<c027e1c8>] (__down_read_trylock) from [<c0218154>] (do_page_fault+0x78/0x27c) [ 49.156036] [<c0218154>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) [ 49.164039] [<c020840c>] (do_DataAbort) from [<c0212218>] (__dabt_svc+0x38/0x60) [ 49.171744] Exception stack(0xec8a5f70 to 0xec8a5fb8) [ 49.177018] 5f60: 40000193 00000000 7466615c 20000193 [ 49.185550] 5f80: 74666158 7466615c 00000207 c098959c 0000017c 74666158 00000028 ec8a60a0 [ 49.194083] 5fa0: c0ad83e0 ec8a5fb8 c027e1c8 c07b3ebc 40000193 ffffffff [ 49.200993] [<c0212218>] (__dabt_svc) from [<c07b3ebc>] (_raw_spin_lock_irqsave+0x10/0x4c) [ 49.209623] [<c07b3ebc>] (_raw_spin_lock_irqsave) from [<c027e1c8>] (__down_read_trylock+0x14/0x54) [ 49.219073] [<c027e1c8>] (__down_read_trylock) from [<c0218154>] (do_page_fault+0x78/0x27c) [ 49.227784] Code: e1a02000 e10f0000 f10c0080 f592f000 (e1923f9f) [ 49.234150] ---[ end trace ab9bbe4c0782530f ]--- [ 49.238971] Kernel panic - not syncing: Fatal exception in interrupt [ 50.268458] SMP: failed to stop secondary CPUs [ 50.273095] CPU0: stopping [ 50.275914] CPU: 0 PID: -326491452 Comm: Tainted: G D W 3.14.0-rc5-01080-ge61512a #1 [ 50.284815] [<c0215d7c>] (unwind_backtrace) from [<c0211734>] (show_stack+0x10/0x14) [ 50.292909] [<c0211734>] (show_stack) from [<c07af3c8>] (dump_stack+0x84/0x94) [ 50.300454] [<c07af3c8>] (dump_stack) from [<c021460c>] (handle_IPI+0x148/0x174) [ 50.308165] [<c021460c>] (handle_IPI) from [<c0208920>] (gic_handle_irq+0x58/0x5c) [ 50.316070] [<c0208920>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 50.323880] Exception stack(0xec8a3ea8 to 0xec8a3ef0) [ 50.329151] 3ea0: c0b8fc40 00000000 00000002 00000000 c0b8d130 ec8a4090 [ 50.337688] 3ec0: ec8a2000 00000000 00000000 c0b8d130 c07b3ec0 c0b8ae04 00000000 ec8a3ef0 [ 50.346225] 3ee0: c0281ccc c07ac488 60000113 ffffffff [ 50.351501] [<c0212280>] (__irq_svc) from [<c07ac488>] (panic+0x198/0x1f4) [ 50.358687] [<c07ac488>] (panic) from [<c0211988>] (die+0x250/0x418) [ 50.365321] [<c0211988>] (die) from [<c07abd74>] (__do_kernel_fault.part.10+0x64/0x74) [ 50.373597] [<c07abd74>] (__do_kernel_fault.part.10) from [<c0218228>] (do_page_fault+0x14c/0x27c) [ 50.382954] [<c0218228>] (do_page_fault) from [<c020840c>] (do_DataAbort+0x30/0x90) ~$off # PYBOOT: Exception: panic
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.506412] smps10_out2: 5000 mV [ 47.510627] smps10_out1: 5000 mV [ 47.514467] ldo1: 1500 <--> 1800 mV [ 47.519053] ldo2: 2800 mV [ 47.522788] ldo3: 1500 mV [ 47.526259] ldo4: 1500 <--> 1800 mV [ 47.530885] ldo5: 1800 mV [ 47.534612] ldo6: 1200 mV [ 47.538296] ldo7: 2000 mV [ 47.542018] ldo8: 3000 mV [ 47.545594] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.551169] ldoln: 1800 mV [ 47.554984] ldousb: 3250 mV [ 47.558465] REGEN1: no parameters [ 47.562015] REGEN2: no parameters [ 47.565707] regen3: no parameters [ 47.569502] SYSEN1: no parameters [ 47.573055] SYSEN2: no parameters [ 47.816464] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.823527] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.829755] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.837693] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.876522] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.885145] spear_cpufreq: Invalid cpufreq_tbl [ 47.894395] ALSA device list: [ 47.897687] No soundcards found. [ 47.901696] Waiting for root device /dev/mmcblk1p2... [ 47.913036] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.923237] mmc2: new high speed SDHC card at address 0001 [ 47.929253] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.934735] mmcblk1: p1 p2 [ 48.016744] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.025635] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.049814] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.058287] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.073456] devtmpfs: mounted [ 48.076818] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 48.111607] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.674072] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.679565] VDAC: 1800 mV [ 1.679565] VANA: 2100 mV [ 1.686340] VCXIO: 1800 mV [ 1.689727] VUSB: 3300 mV [ 1.693298] V1V8: 1800 mV [ 1.696838] V2V1: 2100 mV [ 1.702850] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.827880] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.981658] hub 1-1:1.0: USB hub found [ 1.985687] hub 1-1:1.0: 5 ports detected [ 1.990264] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.270996] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.310729] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.411987] smsc95xx v1.0.4 [ 2.494323] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, c2:23:09:7a:2b:48 [ 2.609497] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.609497] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.624481] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.670288] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.717590] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.727996] mmc0: new high speed SDHC card at address b368 [ 2.734222] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.740325] mmcblk0: p1 p2 [ 2.883209] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.883209] spear_cpufreq: Invalid cpufreq_tbl [ 2.902038] ALSA device list: [ 2.905395] No soundcards found. [ 2.909027] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 2.919189] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.928741] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.944885] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 2.952301] mmc1: new SDIO card at address 0001 [ 2.957733] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.957733] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.984130] devtmpfs: mounted [ 2.984130] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 3.035614] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.819356] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.825972] [drm] No driver support for vblank timestamp query. [ 1.832004] host1x drm: No connectors reported connected with modes [ 1.838276] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.845905] mmc0: new SDIO card at address 0001 [ 1.883997] Console: switching to colour frame buffer device 128x48 [ 1.914547] host1x drm: fb0: frame buffer device [ 1.919282] host1x drm: registered panic notifier [ 1.924001] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.933543] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.938991] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 1.947216] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 1.969186] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.975781] hub 1-0:1.0: USB hub found [ 1.979592] hub 1-0:1.0: 1 port detected [ 2.019293] tegra-ehci c5004000.usb: EHCI Host Controller [ 2.024700] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 2 [ 2.032474] tegra-ehci c5004000.usb: irq 53, io mem 0xc5004000 [ 2.049197] tegra-ehci c5004000.usb: USB 2.0 started, EHCI 1.00 [ 2.055750] hub 2-0:1.0: USB hub found [ 2.059547] hub 2-0:1.0: 1 port detected [ 2.066707] tegra-ehci c5008000.usb: EHCI Host Controller [ 2.072137] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 3 [ 2.079946] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 2.099174] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 2.105753] hub 3-0:1.0: USB hub found [ 2.109549] hub 3-0:1.0: 1 port detected [ 2.114413] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input4 [ 2.121687] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-03-17 20:12:06 UTC (1395087126) [ 2.130733] spear_cpufreq: Invalid cpufreq_tbl [ 2.138510] ALSA device list: [ 2.141675] #0: NVIDIA Tegra Seaboard [ 2.146872] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem [ 2.182983] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.191104] VFS: Mounted root (ext3 filesystem) readonly on device 179:3. [ 2.230314] devtmpfs: mounted [ 2.233760] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 2.368132] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board snow-exynos_defconfig failure log: -------------------------------------------------
OK Loading Device Tree to 5fff0000, end 5ffff897 ... OK
Starting kernel ...
Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,685,125 1,585,125 board_init_f 1,735,044 49,919 board_init_r 1,737,255 2,211 board_init 1,868,078 130,823 board_init_done 1,950,371 82,293 id=64 1,955,801 5,430 main_loop 3,891,230 1,935,429 usb_start 8,572,961 4,681,731 tftp_start 8,572,979 18 id=80 8,572,981 2 eth_start 12,407,135 3,834,154 id=81 12,407,219 84 id=82 12,407,224 5 id=84 12,407,226 2 tftp_done 40,652,116 28,244,890 bootm_start 40,652,124 8 id=1 40,732,161 80,037 id=2 40,732,180 19 id=3 41,514,365 782,185 id=4 41,514,366 1 id=5 41,514,379 13 id=6 42,237,430 723,051 id=7 42,237,433 3 id=8 42,237,448 15 id=15 42,806,543 569,095 start_kernel
Accumulated time: 154,522 lcd Stashed 27 records ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.124 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-DWrTNW/tmpewILWu-uImage tftp 0x00100000 tmp/snowball-DWrTNW/tmpewILWu-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.124 Filename 'tmp/snowball-DWrTNW/tmpewILWu-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### done Bytes transferred = 4580849 (45e5f1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4580785 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 6.174649] ---[ end trace 0c401ef24eaeb933 ]--- [ 6.179254] Kernel panic - not syncing: Attempted to kill the idle task! [ 6.185941] CPU1: stopping [ 6.188644] CPU: 1 PID: 14 Comm: kworker/1:0 Tainted: G D W 3.14.0-rc5-01080-ge61512a #1 [ 6.197427] Workqueue: events od_dbs_timer [ 6.201530] [<c0215bc4>] (unwind_backtrace) from [<c0211724>] (show_stack+0x10/0x14) [ 6.209264] [<c0211724>] (show_stack) from [<c07a7be8>] (dump_stack+0x84/0x94) [ 6.216475] [<c07a7be8>] (dump_stack) from [<c0214460>] (handle_IPI+0x148/0x174) [ 6.223857] [<c0214460>] (handle_IPI) from [<c02088f0>] (gic_handle_irq+0x58/0x5c) [ 6.231414] [<c02088f0>] (gic_handle_irq) from [<c0212280>] (__irq_svc+0x40/0x50) [ 6.238877] Exception stack(0xed0b1ce0 to 0xed0b1d28) [ 6.243920] 1ce0: c0bb1088 20000113 c0aca8b0 00000003 ed0b1d44 00000000 00000001 c0214dc0 [ 6.252081] 1d00: 00000002 ed0b1ddc 00000002 edfdad50 00000001 ed0b1d28 c0214184 c029ae14 [ 6.260238] 1d20: 20000113 ffffffff [ 6.263734] [<c0212280>] (__irq_svc) from [<c029ae14>] (generic_exec_single+0x5c/0x84) [ 6.271639] [<c029ae14>] (generic_exec_single) from [<c029af48>] (smp_call_function_single+0x10c/0x198) [ 6.281017] [<c029af48>] (smp_call_function_single) from [<c029b3d4>] (on_each_cpu+0x2c/0x48) [ 6.289527] [<c029b3d4>] (on_each_cpu) from [<c02150fc>] (twd_rate_change+0x28/0x30) [ 6.297259] [<c02150fc>] (twd_rate_change) from [<c026484c>] (notifier_call_chain+0x44/0x84) [ 6.305683] [<c026484c>] (notifier_call_chain) from [<c0264bd4>] (__srcu_notifier_call_chain+0x44/0x60) [ 6.315059] [<c0264bd4>] (__srcu_notifier_call_chain) from [<c0264c08>] (srcu_notifier_call_chain+0x18/0x20) [ 6.324877] [<c0264c08>] (srcu_notifier_call_chain) from [<c069b694>] (__clk_notify+0x70/0x78) [ 6.333475] [<c069b694>] (__clk_notify) from [<c069b730>] (__clk_recalc_rates+0x94/0x98) [ 6.341551] [<c069b730>] (__clk_recalc_rates) from [<c069b708>] (__clk_recalc_rates+0x6c/0x98) [ 6.350150] [<c069b708>] (__clk_recalc_rates) from [<c069cd64>] (clk_set_parent+0x154/0x18c) [ 6.358576] [<c069cd64>] (clk_set_parent) from [<c065bb60>] (tegra_update_cpu_speed.isra.0+0xa8/0x164) [ 6.367865] [<c065bb60>] (tegra_update_cpu_speed.isra.0) from [<c065bc54>] (tegra_target+0x38/0x58) [ 6.376898] [<c065bc54>] (tegra_target) from [<c0657028>] (__cpufreq_driver_target+0xf8/0x1ac) [ 6.385495] [<c0657028>] (__cpufreq_driver_target) from [<c065a910>] (dbs_check_cpu+0x184/0x18c) [ 6.394266] [<c065a910>] (dbs_check_cpu) from [<c0659e04>] (od_dbs_timer+0x78/0x134) [ 6.402006] [<c0659e04>] (od_dbs_timer) from [<c025a548>] (process_one_work+0x10c/0x378) [ 6.410084] [<c025a548>] (process_one_work) from [<c025b264>] (worker_thread+0x13c/0x404) [ 6.418254] [<c025b264>] (worker_thread) from [<c0260948>] (kthread+0xd4/0xec) [ 6.425464] [<c0260948>] (kthread) from [<c020e6b8>] (ret_from_fork+0x14/0x3c) [ 6.432670] drm_kms_helper: panic occurred, switching back to text console [ 6.439566] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 6.447637] pgd = c0204000 [ 6.450333] [000000c8] *pgd=00000000 ~$off # PYBOOT: Exception: panic
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.163264] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.173437] mmc1: no vqmmc regulator found [ 1.177555] mmc1: no vmmc regulator found [ 1.225427] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.233085] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.242272] mmc2: no vqmmc regulator found [ 1.246389] mmc2: no vmmc regulator found [ 1.293187] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.295426] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.296266] usbcore: registered new interface driver usbhid [ 1.296268] usbhid: USB HID core driver [ 1.299607] TCP: cubic registered [ 1.299613] NET: Registered protocol family 17 [ 1.299789] Key type dns_resolver registered [ 1.330287] ThumbEE CPU extension supported. [ 1.334587] Registering SWP/SWPB emulation handler [ 1.336283] mmc0: new high speed SDHC card at address aaaa [ 1.336725] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.349343] PJ4 iWMMXt coprocessor enabled. [ 1.350638] mmcblk0: p1 p2 [ 1.357389] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.365698] spear_cpufreq: Invalid cpufreq_tbl [ 1.376829] ALSA device list: [ 1.380005] No soundcards found. [ 1.385114] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.393451] mmc1: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.399700] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.407580] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.409638] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.432941] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.439489] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.446241] mmc1: new SDIO card at address 0001 [ 1.451108] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.466859] devtmpfs: mounted [ 1.470340] Freeing unused kernel memory: 532K (c0a3d000 - c0ac2000) [ 1.502888] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.516923] mmc2: new high speed SDHC card at address 0001 [ 1.523457] mmcblk1: mmc2:0001 00000 7.60 GiB ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org