Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.6-rc7-962-ga33181c/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:55.70 bbb arm-multi_v7_defconfig : FAILED 1:56.41 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.19 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.52 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.52 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.75 cosmic arm-multi_v7_defconfig : FAILED 2:08.35 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:52.00 dalmore arm-multi_v7_defconfig : FAILED 1:58.72 dalmore arm-multi_lpae_defconfig : FAILED 2:09.01 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.37 omap5uevm arm-multi_v7_defconfig : FAILED 2:05.42 omap5uevm arm-multi_lpae_defconfig : FAILED 2:08.57 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:48.41 pi arm-multi_lpae_defconfig : FAILED 1:51.60 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:50.04 seaboard arm-multi_v7_defconfig : FAILED 1:59.54 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:58.33 snowball arm-multi_v7_defconfig : FAILED 2:07.37 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.14 arndale arm-exynos_defconfig : passed 1:31.89 arndale arm-multi_v7_defconfig : passed 1:22.23 arndale arm-multi_lpae_defconfig : passed 1:20.50 capri arm-bcm_defconfig : passed 0:51.06 capri arm-multi_v7_defconfig : passed 0:54.31 chitra powerpc-ppc64_defconfig : passed 2:14.62 colombus arm-sunxi_defconfig : passed 2:31.03 colombus arm-multi_v7_defconfig : passed 2:33.30 colombus arm-multi_lpae_defconfig : passed 2:30.43 cubie arm-sunxi_defconfig : passed 0:50.55 cubie arm-multi_v7_defconfig : passed 0:53.37 cubie2 arm-sunxi_defconfig : passed 0:49.49 cubie2 arm-multi_v7_defconfig : passed 0:54.64 cubie2 arm-multi_lpae_defconfig : passed 0:53.27 cubox arm-multi_v7_defconfig : passed 1:10.65 cubox arm-mvebu_v7_defconfig : passed 1:05.28 hummingboard arm-imx_v6_v7_defconfig : passed 1:24.45 hummingboard arm-multi_v7_defconfig : passed 1:20.08 jetsontk1 arm-tegra_defconfig : warnings 0:48.32 jetsontk1 arm-multi_lpae_defconfig : warnings 0:53.67 omap5uevm arm-omap2plus_defconfig : passed 1:11.17 pandaes arm-omap2plus_defconfig : warnings 1:41.28 pandaes arm-multi_v7_defconfig : passed 1:41.82 pi arm-exynos_defconfig : passed 2:08.26 pit arm-exynos_defconfig : passed 2:08.94 pit arm-multi_v7_defconfig : passed 2:15.32 pit arm-multi_lpae_defconfig : passed 2:10.31 seattle arm64-defconfig : warnings 2:25.99 snow arm-exynos_defconfig : passed 2:05.93 snow arm-multi_v7_defconfig : passed 1:58.87 snow arm-multi_lpae_defconfig : passed 1:58.59 trimslice arm-tegra_defconfig : warnings 1:31.09 trimslice arm-multi_v7_defconfig : warnings 1:38.15 wandboard arm-imx_v6_v7_defconfig : passed 1:15.43 wandboard arm-multi_v7_defconfig : passed 1:05.33
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:17.56 beaver arm-multi_v7_defconfig : OFFLINE 2:31.83 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.03 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:26.24 jetsontk1 arm-multi_v7_defconfig : OFFLINE 2:15.44 parallella arm-multi_v7_defconfig : OFFLINE 2:25.23 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.87 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:47.65 sama5 arm-sama5_defconfig : OFFLINE 2:24.25 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:27.39 socfpga arm-socfpga_defconfig : OFFLINE 2:16.89 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.98
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.642763] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.652831] ledtrig-cpu: registered to indicate activity on CPUs [ 1.659937] usbcore: registered new interface driver usbhid [ 1.665848] usbhid: USB HID core driver [ 1.678010] NET: Registered protocol family 10 [ 1.684579] sit: IPv6 over IPv4 tunneling driver [ 1.690738] NET: Registered protocol family 17 [ 1.695509] can: controller area network core (rev 20120528 abi 9) [ 1.702144] NET: Registered protocol family 29 [ 1.706868] can: raw protocol (rev 20120528) [ 1.711389] can: broadcast manager protocol (rev 20120528 t) [ 1.717386] can: netlink gateway (rev 20130117) max_hops=1 [ 1.724153] Key type dns_resolver registered [ 1.729076] omap_voltage_late_init: Voltage driver support not added [ 1.737406] ThumbEE CPU extension supported. [ 1.742033] Registering SWP/SWPB emulation handler [ 1.784190] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.790716] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.798482] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.807205] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.815127] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.822962] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.830799] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.838155] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.846883] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.854800] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.864545] mmc1: new high speed MMC card at address 0001 [ 1.871809] hctosys: unable to open rtc device (rtc0) [ 1.884800] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.890874] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.897853] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.906725] mmcblk1: p1 p2 [ 1.912446] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:54]: got exception: timeout ~$off
[PYBOOT] [bbb 01:55]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.029356] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.035472] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.041797] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.048685] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.058280] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.067777] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.074795] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.118250] ledtrig-cpu: registered to indicate activity on CPUs [ 2.126907] oprofile: using arm/armv7 [ 2.132006] Initializing XFRM netlink socket [ 2.137083] NET: Registered protocol family 10 [ 2.147841] sit: IPv6 over IPv4 tunneling driver [ 2.156518] NET: Registered protocol family 17 [ 2.161448] NET: Registered protocol family 15 [ 2.166678] Key type dns_resolver registered [ 2.171612] omap_voltage_late_init: Voltage driver support not added [ 2.178356] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.186820] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.197077] ThumbEE CPU extension supported. [ 2.201734] Registering SWP/SWPB emulation handler [ 2.206766] SmartReflex Class3 initialized [ 2.275913] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.283179] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.293666] mmc1: new high speed MMC card at address 0001 [ 2.305732] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.313982] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.321728] hctosys: unable to open rtc device (rtc0) [ 2.327049] sr_init: No PMIC hook to init smartreflex [ 2.332830] sr_init: platform driver register failed for SR [ 2.372572] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.380518] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.394765] mmcblk1: p1 p2 [ 2.411898] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:53]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.173676] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.180757] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.206035] rtc-ds1307 2-006f: SET TIME! [ 2.211771] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.218531] rtc-ds1307 2-006f: 64 bytes nvram [ 2.223152] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.231391] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.237185] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.245439] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.254613] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.261493] hub 1-0:1.0: USB hub found [ 2.265454] hub 1-0:1.0: 1 port detected [ 2.269870] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.275648] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.283761] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.292789] hub 2-0:1.0: USB hub found [ 2.296761] hub 2-0:1.0: 1 port detected [ 2.302830] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.336656] vdd_3v3: supplied by regen1 [ 2.374861] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.392390] aic_dvdd_fixed: disabling [ 2.397126] Waiting for root device /dev/mmcblk0p1... [ 2.417670] mmc1: new high speed MMC card at address 0001 [ 2.423639] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.428521] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.434856] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.441731] mmcblk1: p1 [ 2.575528] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.610590] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.635865] hub 2-1:1.0: USB hub found [ 2.639846] hub 2-1:1.0: 4 ports detected [ 2.731890] hub 1-1:1.0: USB hub found [ 2.735873] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.168542] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.175618] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.201111] rtc-ds1307 2-006f: SET TIME! [ 2.206884] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.213626] rtc-ds1307 2-006f: 64 bytes nvram [ 2.218241] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.226474] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.232257] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.240495] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.249661] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.256533] hub 1-0:1.0: USB hub found [ 2.260492] hub 1-0:1.0: 1 port detected [ 2.264902] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.270687] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.278803] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.287810] hub 2-0:1.0: USB hub found [ 2.291774] hub 2-0:1.0: 1 port detected [ 2.297855] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.331692] vdd_3v3: supplied by regen1 [ 2.368400] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.385946] aic_dvdd_fixed: disabling [ 2.390703] Waiting for root device /dev/mmcblk0p1... [ 2.412642] mmc1: new high speed MMC card at address 0001 [ 2.418628] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.423514] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.429859] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.436735] mmcblk1: p1 [ 2.570588] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.605654] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.630911] hub 2-1:1.0: USB hub found [ 2.634887] hub 2-1:1.0: 4 ports detected [ 2.726938] hub 1-1:1.0: USB hub found [ 2.730920] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.638766] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.645631] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.656015] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.660878] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.667202] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.674059] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.683646] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.693154] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.700213] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.747582] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.753881] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.760754] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.770355] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.779852] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.786895] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.793011] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.799325] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.806166] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.815762] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.825261] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.832304] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.838957] vdd_3v3: supplied by regen1 [ 2.877726] hctosys: unable to open rtc device (rtc0) [ 2.883025] sr_init: No PMIC hook to init smartreflex [ 2.888549] sr_init: platform driver register failed for SR [ 2.929307] mmc1: new high speed MMC card at address 0001 [ 2.936583] aic_dvdd_fixed: disabling [ 2.937249] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.937946] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.938691] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.948418] mmcblk1: p1 [ 2.960694] ldousb: disabling [ 2.966860] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:44]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.427877] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.502065] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.512170] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.586411] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.596511] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.670742] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.680853] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.755091] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.765196] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.839432] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.849545] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.923744] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.933861] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.008126] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.018234] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.092419] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.102521] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.176757] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.186857] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.261083] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.271185] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.345419] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.355522] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.429747] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.439851] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.514034] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.524136] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.598369] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.608473] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.682668] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.692775] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.767009] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.777120] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.090171] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.164150] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.174222] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.248204] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.258281] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.332261] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.342342] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.416322] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.426401] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.500385] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.510478] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.584467] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.594534] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.668523] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.678594] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.752573] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.762646] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.836625] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.846696] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.920684] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.930756] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.004740] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.014809] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.088789] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.098859] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.172841] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.182920] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.256945] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.267011] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.340998] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.351074] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.425054] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.435133] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:06]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:07]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.686637] Key type dns_resolver registered [ 2.693098] ThumbEE CPU extension supported. [ 2.697512] Registering SWP/SWPB emulation handler [ 2.746544] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.756123] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.768828] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.784464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.791264] [drm] No driver support for vblank timestamp query. [ 2.968259] Console: switching to colour frame buffer device 240x75 [ 2.972331] mmc1: new high speed MMC card at address 0001 [ 2.976548] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.980125] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.982582] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.985649] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.990244] mmcblk1: p1 [ 3.089119] drm drm: fb0: frame buffer device [ 3.106202] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.116304] usb2_vbus: supplied by vdd-sys-5v0 [ 3.127189] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.132789] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.141489] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.156220] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.165460] hub 1-0:1.0: USB hub found [ 3.169531] hub 1-0:1.0: 1 port detected [ 3.180273] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.195152] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.256784] dvdd_ts: disabling [ 3.259884] usb1_vbus: disabling [ 3.263267] vdd_cam_1v8_reg: disabling [ 3.270702] Waiting for root device /dev/mmcblk0p1... [ 3.481217] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.437259] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 48.516176] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:06]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:08]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.686526] Key type dns_resolver registered [ 2.692994] ThumbEE CPU extension supported. [ 2.697410] Registering SWP/SWPB emulation handler [ 2.731200] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.739541] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.749958] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.764909] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.771697] [drm] No driver support for vblank timestamp query. [ 2.784776] mmc1: new high speed MMC card at address 0001 [ 2.794925] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.802931] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.811580] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.821249] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.831843] mmcblk1: p1 [ 2.951620] Console: switching to colour frame buffer device 240x75 [ 3.039193] drm drm: fb0: frame buffer device [ 3.058673] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.068768] usb2_vbus: supplied by vdd-sys-5v0 [ 3.080565] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.086153] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.094917] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.108691] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.118987] hub 1-0:1.0: USB hub found [ 3.122998] hub 1-0:1.0: 1 port detected [ 3.133692] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.148005] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.209788] dvdd_ts: disabling [ 3.212890] usb1_vbus: disabling [ 3.216264] vdd_cam_1v8_reg: disabling [ 3.223719] Waiting for root device /dev/mmcblk0p1... [ 3.438715] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.416866] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.465606] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.837508] Bluetooth: RFCOMM ver 1.11 [ 2.841476] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.846874] Bluetooth: BNEP socket layer initialized [ 2.851962] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.857961] Bluetooth: HIDP socket layer initialized [ 2.864889] Key type dns_resolver registered [ 2.874429] Registering SWP/SWPB emulation handler [ 2.902344] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.907602] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.914834] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.937464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.944247] [drm] No driver support for vblank timestamp query. [ 3.122880] Console: switching to colour frame buffer device 240x75 [ 3.209745] drm drm: fb0: frame buffer device [ 3.240339] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.247619] usb2_vbus: supplied by vdd-sys-5v0 [ 3.256065] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.261932] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.271075] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.290344] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.304422] hub 1-0:1.0: USB hub found [ 3.308469] hub 1-0:1.0: 1 port detected [ 3.322550] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.338596] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.433046] dvdd_ts: disabling [ 3.436149] usb1_vbus: disabling [ 3.439410] vdd_cam_1v8_reg: disabling [ 3.444215] ALSA device list: [ 3.447216] #0: NVIDIA Tegra Dalmore [ 3.453174] Waiting for root device /dev/mmcblk0p1... [ 3.630332] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.654051] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.289631] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:51]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.652732] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.661645] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.692774] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.693856] s5p-secss 10830000.sss: s5p-sss driver registered [ 1.701905] usbcore: registered new interface driver usbhid [ 1.703910] usbhid: USB HID core driver [ 1.712402] NET: Registered protocol family 10 [ 1.713024] sit: IPv6 over IPv4 tunneling driver [ 1.717888] NET: Registered protocol family 17 [ 1.721169] NET: Registered protocol family 15 [ 1.725641] Key type dns_resolver registered [ 1.729960] Registering SWP/SWPB emulation handler [ 1.735760] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740364] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.759278] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.763546] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.768294] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770514] max98090 1-0010: use default 2.8v micbias [ 1.783009] mmc1: new DDR MMC card at address 0001 [ 1.788296] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.790067] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.793054] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.805187] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.811125] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.816954] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.823501] mmcblk1: p1 p2 [ 1.837900] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.857208] VDD10_HDMI_1.0V: disabling [ 1.857905] vdd_g3d: disabling [ 1.858973] BUCK8_2.8V: disabling [ 1.86b947] ALSA device list: [ 1.864598] #0: Odroid-U3 [ 1.868294] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:50]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.770595] usbhid: USB HID core driver [ 1.779239] NET: Registered protocol family 10 [ 1.784167] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.791313] sit: IPv6 over IPv4 tunneling driver [ 1.796653] NET: Registered protocol family 17 [ 1.801327] can: controller area network core (rev 20120528 abi 9) [ 1.807874] NET: Registered protocol family 29 [ 1.812563] can: raw protocol (rev 20120528) [ 1.817071] can: broadcast manager protocol (rev 20120528 t) [ 1.823028] can: netlink gateway (rev 20130117) max_hops=1 [ 1.829079] Key type dns_resolver registered [ 1.833676] omap_vc_init_channel: No PMIC info for vdd_core [ 1.839539] omap_vp_init: No PMIC info for vdd_core [ 1.844680] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.850357] omap_vp_init: No PMIC info for vdd_mm [ 1.855292] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.861034] omap_vp_init: No PMIC info for vdd_mpu [ 1.866570] Power Management for TI OMAP4+ devices. [ 1.871812] ThumbEE CPU extension supported. [ 1.876300] Registering SWP/SWPB emulation handler [ 1.883364] palmas 0-0048: Irq flag is 0x00000000 [ 1.906664] mmc0: new high speed MMC card at address 0001 [ 1.912667] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.917657] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.924303] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.930841] smsc95xx v1.0.4 [ 1.935479] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.946328] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.986616] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.996770] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 4e:2f:f9:50:96:5f [ 2.012763] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.053762] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.061694] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.781677] NET: Registered protocol family 10 [ 1.786612] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.793769] sit: IPv6 over IPv4 tunneling driver [ 1.799070] NET: Registered protocol family 17 [ 1.803741] can: controller area network core (rev 20120528 abi 9) [ 1.810252] NET: Registered protocol family 29 [ 1.814911] can: raw protocol (rev 20120528) [ 1.819374] can: broadcast manager protocol (rev 20120528 t) [ 1.825304] can: netlink gateway (rev 20130117) max_hops=1 [ 1.831336] Key type dns_resolver registered [ 1.835903] omap_vc_init_channel: No PMIC info for vdd_core [ 1.841729] omap_vp_init: No PMIC info for vdd_core [ 1.846834] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.852477] omap_vp_init: No PMIC info for vdd_mm [ 1.857405] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.863141] omap_vp_init: No PMIC info for vdd_mpu [ 1.868674] Power Management for TI OMAP4+ devices. [ 1.873903] ThumbEE CPU extension supported. [ 1.878399] Registering SWP/SWPB emulation handler [ 1.885515] palmas 0-0048: Irq flag is 0x00000000 [ 1.912120] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.922839] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.934128] mmc0: new high speed MMC card at address 0001 [ 1.940203] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.945111] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.951462] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.985170] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.010190] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.020196] smsc95xx v1.0.4 [ 2.051246] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.059150] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.064430] Unable to [h 0 0 0 2 .e0 k6e4r4nel paging request at virtual address 0000f158
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.534828] isl29018 7-0044: No cache defaults, reading back from HW [ 1.541176] isl29018 7-0044: Failed to read 1: -6 [ 1.545759] isl29018 7-0044: regmap initialization fails: -6 [ 1.556617] NET: Registered protocol family 10 [ 1.561063] sit: IPv6 over IPv4 tunneling driver [ 1.564654] NET: Registered protocol family 17 [ 1.568653] can: controller area network core (rev 20120528 abi 9) [ 1.574837] NET: Registered protocol family 29 [ 1.579231] can: raw protocol (rev 20120528) [ 1.583480] can: broadcast manager protocol (rev 20120528 t) [ 1.589122] can: netlink gateway (rev 20130117) max_hops=1 [ 1.594858] Key type dns_resolver registered [ 1.599183] ThumbEE CPU extension supported. [ 1.603089] Registering SWP/SWPB emulation handler [ 1.612261] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617749] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.624104] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.629479] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.639587] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.645818] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.658846] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.664513] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670694] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676057] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.685774] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.707816] Waiting for root device /dev/mmcblk0p1... [ 1.711628] mmc0: tuning execution failed: -5 [ 1.715756] mmc0: error -5 whilst initialising MMC card [ 2.584569] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597942] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603403] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609773] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615156] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:49]: got exception: timeout ~$off
[PYBOOT] [pi 01:51]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.539877] isl29018 7-0044: No cache defaults, reading back from HW [ 1.546222] isl29018 7-0044: Failed to read 1: -6 [ 1.550806] isl29018 7-0044: regmap initialization fails: -6 [ 1.561659] NET: Registered protocol family 10 [ 1.566106] sit: IPv6 over IPv4 tunneling driver [ 1.569694] NET: Registered protocol family 17 [ 1.573691] can: controller area network core (rev 20120528 abi 9) [ 1.579877] NET: Registered protocol family 29 [ 1.584270] can: raw protocol (rev 20120528) [ 1.588519] can: broadcast manager protocol (rev 20120528 t) [ 1.594161] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599893] Key type dns_resolver registered [ 1.604222] ThumbEE CPU extension supported. [ 1.608128] Registering SWP/SWPB emulation handler [ 1.617319] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622814] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629168] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634545] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644650] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.650883] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.663918] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.669583] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.675768] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681130] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.690847] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.712903] Waiting for root device /dev/mmcblk0p1... [ 1.716719] mmc0: tuning execution failed: -5 [ 1.720845] mmc0: error -5 whilst initialising MMC card [ 2.584618] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597991] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603456] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609823] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615207] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:46]: got exception: timeout ~$off
[PYBOOT] [pi 01:47]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.843097] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.853620] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.860107] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.865536] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.874155] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.888819] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.896062] hub 3-0:1.0: USB hub found [ 1.899975] hub 3-0:1.0: 1 port detected [ 1.903960] mmc2: switch to bus width 8 failed [ 1.910671] mmc2: switch to bus width 4 failed [ 1.915177] mmc2: new high speed MMC card at address 0001 [ 1.921516] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.924538] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.924542] [drm] No driver support for vblank timestamp query. [ 1.935012] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.944791] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.951277] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.960026] mmcblk2: p3 [ 1.972726] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.975686] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.983425] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.003092] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.008590] mmc0: new SDIO card at address 0001 [ 2.032517] Console: switching to colour frame buffer device 170x48 [ 2.087826] drm drm: fb0: frame buffer device [ 2.103821] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.110920] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.118183] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.133875] vdd_1v5: disabling [ 2.136935] vdd_1v2: disabling [ 2.713062] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.724463] Waiting for root device /dev/mmcblk0p3... [ 58.479946] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:57]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:58]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.771284] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.771312] Bluetooth: BNEP socket layer initialized [ 1.771323] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.771348] Bluetooth: HIDP socket layer initialized [ 1.771878] Key type dns_resolver registered [ 1.772951] Registering SWP/SWPB emulation handler [ 1.799378] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.799931] VDDIO_HDMI: supplied by vdd_5v0 [ 1.800192] vdd_sys: supplied by vdd_5v0 [ 1.800281] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.800535] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.801080] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.805032] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.805063] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.805126] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.805629] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.828506] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.833926] hub 3-0:1.0: USB hub found [ 1.833986] hub 3-0:1.0: 1 port detected [ 1.848218] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.848222] [drm] No driver support for vblank timestamp query. [ 1.921886] mmc0: new SDIO card at address 0001 [ 1.948890] Console: switching to colour frame buffer device 170x48 [ 1.973194] drm drm: fb0: frame buffer device [ 1.998499] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.005594] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.013205] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.032201] vdd_1v5: disabling [ 2.035254] vdd_1v2: disabling [ 2.038424] ALSA device list: [ 2.041422] #0: NVIDIA Tegra Seaboard [ 2.457771] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.469000] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.901702] ledtrig-cpu: registered to indicate activity on CPUs [ 2.909210] usbcore: registered new interface driver usbhid [ 2.914886] usbhid: USB HID core driver [ 2.939331] NET: Registered protocol family 10 [ 2.946441] sit: IPv6 over IPv4 tunneling driver [ 2.951690] NET: Registered protocol family 17 [ 2.956146] can: controller area network core (rev 20120528 abi 9) [ 2.962402] NET: Registered protocol family 29 [ 2.966857] can: raw protocol (rev 20120528) [ 2.971160] can: broadcast manager protocol (rev 20120528 t) [ 2.976837] can: netlink gateway (rev 20130117) max_hops=1 [ 2.982788] Key type dns_resolver registered [ 2.987274] ThumbEE CPU extension supported. [ 2.991577] Registering SWP/SWPB emulation handler [ 3.002227] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 3.009094] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.018280] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 3.025299] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 3.032287] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 3.039276] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 3.052246] db8500-esram12: disabling [ 3.056182] db8500-esram34: disabling [ 3.060607] V-CSI/DSI: disabling [ 3.064025] mmci-reg: disabling [ 3.069702] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 3.075836] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 3.084747] Waiting for root device /dev/mmcblk0p4... [ 3.115356] mmc3: new high speed MMC card at address 0001 [ 3.121704] mmcblk3: mmc3:0001 3.53 GiB [ 3.126190] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.131805] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.137451] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.144042] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:05]: got exception: timeout ~$off
[PYBOOT] [snowball 02:06]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.679779] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.689727] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.700469] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.724639] NET: Registered protocol family 10 [ 2.730102] sit: IPv6 over IPv4 tunneling driver [ 2.735626] NET: Registered protocol family 17 [ 2.740173] NET: Registered protocol family 35 [ 2.744689] NET: Registered protocol family 37 [ 2.749267] Registering SWP/SWPB emulation handler [ 2.755828] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.762115] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.768707] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.780364] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-21 11:37:42 UTC (956317062) [ 2.789642] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.796722] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.803771] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.810821] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.824523] db8500-esram12: disabling [ 2.828247] db8500-esram34: disabling [ 2.832244] V-CSI/DSI: disabling [ 2.835510] mmci-reg: disabling [ 2.838806] ALSA device list: [ 2.841857] #0: MOP500-card [ 2.845214] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.851196] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.857421] Waiting for root device /dev/mmcblk0p4... [ 67.110198] random: nonblocking pool is initialized Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:56]: got exception: timeout ~$off
[PYBOOT] [snowball 01:57]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter