Tree/Branch: mainline Git describe: v3.15-7378-g14208b0 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig

Full Report ===========

arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.0 sec: PASS da850-evm 0 min 15.1 sec: PASS

arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.9 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS

arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.5 sec: PASS omap5-uevm 1 min 40.0 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 14.6 sec: PASS

arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.2 sec: FAIL

arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.2 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 46.8 sec: PASS legacy,3530beagle 0 min 35.1 sec: PASS (Warnings: 1) omap4-panda 0 min 53.9 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.3 sec: PASS am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 0 min 53.4 sec: PASS (Warnings: 6) omap3-n900 0 min 17.6 sec: PASS legacy,n900 0 min 17.4 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.0 sec: PASS (Warnings: 1) legacy,3730storm 0 min 20.0 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1)

arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 21.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.6 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 30.7 sec: PASS am335x-bone 0 min 28.5 sec: PASS tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 55.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS ste-snowball 1 min 14.4 sec: PASS tegra30-beaver 0 min 20.4 sec: PASS omap3-n900 0 min 15.1 sec: PASS qcom-apq8074-dragonboard 0 min 18.5 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS omap3-overo-storm-tobi 0 min 21.4 sec: PASS omap3-beagle-xm 1 min 4.4 sec: PASS exynos5420-arndale-octa 0 min 41.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 44.1 sec: PASS (Warnings: 6) omap4-panda-es 0 min 54.4 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS

arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS sun4i-a10-cubieboard 0 min 11.4 sec: PASS

arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.5 sec: PASS

arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.0 sec: PASS

arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.4 sec: FAIL exynos5250-arndale 0 min 34.3 sec: PASS exynos5410-smdk5410 0 min 27.1 sec: PASS

arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS

arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL

arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.2 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS

arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 25.7 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS

arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.3 sec: PASS

Console logs for failures =========================

arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ----------------------------------------------

armada-370-mirabox: FAIL: last 40 lines of boot log: ----------------------------------------------------

hub 2-0:1.0: 1 port detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 request_module: runaway loop modprobe binfmt-4c46 orion_wdt: Initial timeout 229 sec sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mvsdio d00d4000.mvsdio: lacking card detect (fall back to polling) sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered rtc-mv d0010300.rtc: setting system clock to 2014-06-09 06:31:24 UTC (1402295484) ALSA device list: No soundcards found. Freeing unused kernel memory: 216K (c0586000 - c05bc000) request_module: runaway loop modprobe binfmt-4c46 request_module: runaway loop modprobe binfmt-4c46 Failed to execute /init (error -8) mmc0: new high speed SDIO card at address 0001 mwifiex_sdio mmc0:0001:1: Direct firmware load failed with error -2 mwifiex_sdio mmc0:0001:1: Falling back to user helper Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 20.22 seconds. # PYBOOT: Result: FAIL

arm-exynos_defconfig --------------------

exynos5420-arndale-octa: FAIL: last 40 lines of boot log: ---------------------------------------------------------

[ 16.247652] of_get_named_gpiod_flags exited with status 0 [ 16.251801] mmcblk0: p1 p2 p3 p4 [ 16.255032] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.262508] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.267443] Modules linked in: [ 16.270481] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-07378-g14208b0 #1 [ 16.279068] Workqueue: kmmcd mmc_rescan [ 16.282869] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.288248] PC is at rescan_partitions+0xb4/0x290 [ 16.292921] LR is at 0xf00b8000 [ 16.296042] pc : [<c01afc68>] lr : [<f00b8000>] psr: 20000113 [ 16.296042] sp : ef0b5c78 ip : 00000000 fp : 00000000 [ 16.307478] r10: 00000000 r9 : ed58ef40 r8 : ef21b200 [ 16.312678] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.319177] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.325678] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.332956] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.338675] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.345000] Stack: (0xef0b5c78 to 0xef0b6000) [ 16.349334] 5c60: c054c3b4 00000001 [ 16.357481] 5c80: ef0b4000 c0387698 00000001 c05284f8 ed5ef4d8 c05283c8 eec24380 ed5ef3a8 [ 16.365626] 5ca0: eec24330 eec24280 00000000 ed5ef3a8 00000000 00000000 00000000 eec24280 [ 16.373771] 5cc0: ef21b200 eec24290 00000001 00000000 00000000 c00e3054 c00e19f4 00000000 [ 16.381916] 5ce0: 00000000 00000001 eec24280 00000000 ef21b270 ef21b20c 00000000 ed5ef2c0 [ 16.390063] 5d00: 00000003 c00e32b8 c052a6cc 00000001 00000003 c0388960 c052a6cc c00e1fc4 [ 16.398208] 5d20: ef0b5d2c c022226c ef21b240 00000001 eec24280 ef21b200 ef21b270 ef21b20c [ 16.406353] 5d40: 00000000 ed5ef2c0 00000003 c01adb7c c01ac9d0 ef21b200 00000080 0b300000 [ 16.414499] 5d60: 00000002 ed6cf000 ed6cbc00 ed6cb800 ed6cb800 ed6cbabc c02bada0 ed6cbc00 [ 16.422644] 5d80: ed6cb800 ed6cbd88 ef0b5dce c02bbca4 00000056 ed6cbc6c 00000003 ed6cf000 [ 16.430790] 5da0: ed6cbc00 c02bc8d4 00000003 ef0b5dce 00000008 ed6dd708 c0469ec4 ed6cba98 [ 16.438935] 5dc0: 00000000 34362e33 42694720 32310000 694b2038 c0000042 00000001 ed6cbc08 [ 16.447081] 5de0: c058dfdc 00000000 c054c33c 00000001 00000000 c054bfc8 ef013c00 c02b113c [ 16.455226] 5e00: c02b1124 c0225d10 00000000 ed6cbc08 c0225ec0 ed6cc408 00000000 c02244ec [ 16.463372] 5e20: ef335698 ef203244 ed6cbc08 ed6cbc3c c054bee8 c0225bec ed6cbc08 ed6cbc08 [ 16.471517] 5e40: c054bee8 c022535c ed6cbc08 00000000 ed6cbc10 c02239c4 ef013c00 c03815dc [ 16.479663] 5e60: c047d004 ef0b5e7c 00061a80 ed6cbc00 ed6cbc08 c0451e40 00000001 c047cfb8 [ 16.487808] 5e80: 00000000 c02b1550 c047cfb8 c0451e40 c047cf74 00000001 ed6cc4~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.38 seconds. # PYBOOT: Result: FAIL

arm-u8500_defconfig -------------------

ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------

[ 3.497375] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.505218] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.513244] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.525177] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.532501] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.543975] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.552581] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.564514] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.571838] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.583312] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.591125] HS USB OTG: no transceiver configured [ 3.595825] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.603698] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.611694] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.623626] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.630950] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.642425] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.651062] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.662994] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.670288] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.681762] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.689575] HS USB OTG: no transceiver configured [ 3.694305] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.702148] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.710174] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.722106] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.729400] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.740875] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.749481] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.761413] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.768737] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.780212] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.788024] HS USB OTG: no transceiver configured [ 3.792755] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.800598] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.808593] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.45 seconds. # PYBOOT: Result: FAIL