Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160511/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.10 bbb arm-multi_v7_defconfig : FAILED 1:59.83 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.01 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.05 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:52.17 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.27 cosmic arm-multi_v7_defconfig : FAILED 2:05.57 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:55.51 dalmore arm-multi_v7_defconfig : FAILED 1:56.61 dalmore arm-multi_lpae_defconfig : FAILED 2:08.77 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.94 omap5uevm arm-multi_v7_defconfig : FAILED 2:10.19 omap5uevm arm-multi_lpae_defconfig : FAILED 2:10.46 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:51.39 seaboard arm-multi_v7_defconfig : FAILED 1:56.16 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.74 snowball arm-multi_v7_defconfig : FAILED 2:15.29 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:08.30 arndale arm-exynos_defconfig : passed 1:36.61 arndale arm-multi_v7_defconfig : passed 1:45.11 arndale arm-multi_lpae_defconfig : passed 1:30.49 capri arm-bcm_defconfig : passed 0:55.73 capri arm-multi_v7_defconfig : passed 0:58.39 chitra powerpc-ppc64_defconfig : passed 2:07.09 colombus arm-sunxi_defconfig : passed 2:23.03 colombus arm-multi_v7_defconfig : passed 2:26.97 colombus arm-multi_lpae_defconfig : passed 2:31.86 cubie arm-sunxi_defconfig : passed 0:52.54 cubie arm-multi_v7_defconfig : passed 0:47.66 cubie2 arm-sunxi_defconfig : passed 0:49.28 cubie2 arm-multi_v7_defconfig : passed 0:48.15 cubie2 arm-multi_lpae_defconfig : passed 0:52.86 cubox arm-multi_v7_defconfig : passed 1:04.39 cubox arm-mvebu_v7_defconfig : passed 1:00.01 hummingboard arm-imx_v6_v7_defconfig : passed 1:25.20 hummingboard arm-multi_v7_defconfig : passed 1:41.83 jetsontk1 arm-tegra_defconfig : warnings 0:58.85 jetsontk1 arm-multi_v7_defconfig : warnings 0:56.09 jetsontk1 arm-multi_lpae_defconfig : warnings 1:01.08 omap5uevm arm-omap2plus_defconfig : passed 1:06.54 pandaes arm-omap2plus_defconfig : warnings 1:38.14 pandaes arm-multi_v7_defconfig : passed 1:42.90 pi arm-exynos_defconfig : passed 2:14.99 pi arm-multi_v7_defconfig : passed 2:09.54 pi arm-multi_lpae_defconfig : passed 2:28.67 pit arm-exynos_defconfig : passed 2:07.77 pit arm-multi_v7_defconfig : passed 2:17.74 pit arm-multi_lpae_defconfig : passed 2:14.47 seattle arm64-defconfig : passed 2:21.76 snow arm-exynos_defconfig : passed 2:02.29 snow arm-multi_v7_defconfig : passed 2:04.83 snow arm-multi_lpae_defconfig : passed 2:04.24 trimslice arm-tegra_defconfig : warnings 1:34.99 trimslice arm-multi_v7_defconfig : warnings 2:47.11 wandboard arm-imx_v6_v7_defconfig : passed 1:19.87 wandboard arm-multi_v7_defconfig : passed 1:10.92
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:11.46 beaver arm-multi_v7_defconfig : OFFLINE 2:15.49 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:15.95 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:25.82 parallella arm-multi_v7_defconfig : OFFLINE 2:22.04 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:53.69 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:49.94 sama5 arm-sama5_defconfig : OFFLINE 2:22.10 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:19.03 socfpga arm-socfpga_defconfig : OFFLINE 2:19.15 socfpga arm-multi_v7_defconfig : OFFLINE 2:17.21
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.566444] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.632273] Synopsys Designware Multimedia Card Interface Driver [ 1.640027] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.649923] ledtrig-cpu: registered to indicate activity on CPUs [ 1.657169] usbcore: registered new interface driver usbhid [ 1.663097] usbhid: USB HID core driver [ 1.674968] NET: Registered protocol family 10 [ 1.681526] sit: IPv6 over IPv4 tunneling driver [ 1.687669] NET: Registered protocol family 17 [ 1.692422] can: controller area network core (rev 20120528 abi 9) [ 1.699061] NET: Registered protocol family 29 [ 1.703769] can: raw protocol (rev 20120528) [ 1.708279] can: broadcast manager protocol (rev 20120528 t) [ 1.714272] can: netlink gateway (rev 20130117) max_hops=1 [ 1.721037] Key type dns_resolver registered [ 1.725908] omap_voltage_late_init: Voltage driver support not added [ 1.732844] ThumbEE CPU extension supported. [ 1.737392] Registering SWP/SWPB emulation handler [ 1.782339] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.788786] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.796518] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.803845] mmc1: new MMC card at address 0001 [ 1.809567] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.814783] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.822598] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.830405] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.838163] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.845925] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.853240] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.859548] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.867904] hctosys: unable to open rtc device (rtc0) [ 1.880993] mmcblk1: p1 p2 [ 1.887978] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:58]: got exception: timeout ~$off
[PYBOOT] [bbb 01:59]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.052044] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.058171] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.064509] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.071396] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.081006] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.090521] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.097549] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.140630] ledtrig-cpu: registered to indicate activity on CPUs [ 2.149336] oprofile: using arm/armv7 [ 2.154310] Initializing XFRM netlink socket [ 2.159439] NET: Registered protocol family 10 [ 2.169840] sit: IPv6 over IPv4 tunneling driver [ 2.178841] NET: Registered protocol family 17 [ 2.183771] NET: Registered protocol family 15 [ 2.188987] Key type dns_resolver registered [ 2.193841] omap_voltage_late_init: Voltage driver support not added [ 2.200585] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.209066] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.218670] ThumbEE CPU extension supported. [ 2.223299] Registering SWP/SWPB emulation handler [ 2.228326] SmartReflex Class3 initialized [ 2.296372] mmc1: new MMC card at address 0001 [ 2.311308] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.318625] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.326414] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.333752] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.345812] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.353159] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.364099] hctosys: unable to open rtc device (rtc0) [ 2.369416] sr_init: No PMIC hook to init smartreflex [ 2.375233] sr_init: platform driver register failed for SR [ 2.417680] mmcblk1: p1 p2 [ 2.435686] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.171042] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.185780] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.192860] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.215469] rtc-ds1307 2-006f: SET TIME! [ 2.221199] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.227948] rtc-ds1307 2-006f: 64 bytes nvram [ 2.232567] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.240814] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.246603] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.254855] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.264023] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.270919] hub 1-0:1.0: USB hub found [ 2.274877] hub 1-0:1.0: 1 port detected [ 2.279290] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.285071] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.293187] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.302214] hub 2-0:1.0: USB hub found [ 2.306184] hub 2-0:1.0: 1 port detected [ 2.312289] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.376620] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.394821] aic_dvdd_fixed: disabling [ 2.399524] Waiting for root device /dev/mmcblk0p1... [ 2.421962] mmc1: new MMC card at address 0001 [ 2.426994] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.431920] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.438297] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.446506] mmcblk1: p1 [ 2.584979] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.741323] hub 1-1:1.0: USB hub found [ 2.745324] hub 1-1:1.0: 4 ports detected [ 2.825011] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.853315] hub 2-1:1.0: USB hub found [ 2.857302] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:50]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:51]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.167010] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.181803] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.188880] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.215758] rtc-ds1307 2-006f: SET TIME! [ 2.221537] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.228311] rtc-ds1307 2-006f: 64 bytes nvram [ 2.232927] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.241189] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.246985] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.255239] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.264413] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.271315] hub 1-0:1.0: USB hub found [ 2.275297] hub 1-0:1.0: 1 port detected [ 2.279680] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.285461] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.293585] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.302602] hub 2-0:1.0: USB hub found [ 2.306577] hub 2-0:1.0: 1 port detected [ 2.312642] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.376856] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.394658] aic_dvdd_fixed: disabling [ 2.399366] Waiting for root device /dev/mmcblk0p1... [ 2.417251] mmc1: new MMC card at address 0001 [ 2.422279] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.427205] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.433568] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.441787] mmcblk1: p1 [ 2.585256] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.741719] hub 1-1:1.0: USB hub found [ 2.745708] hub 1-1:1.0: 4 ports detected [ 2.825289] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.853711] hub 2-1:1.0: USB hub found [ 2.857704] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.267975] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.274267] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.281167] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.291561] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.296407] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.302718] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.309579] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.319176] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.328667] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.335709] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.377419] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.383725] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.390598] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.400189] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.409697] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.416750] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.422871] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.429181] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.436032] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.445629] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.455128] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.462168] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.507556] hctosys: unable to open rtc device (rtc0) [ 4.512857] sr_init: No PMIC hook to init smartreflex [ 4.518379] sr_init: platform driver register failed for SR [ 4.553943] mmc1: new MMC card at address 0001 [ 4.560958] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.564662] aic_dvdd_fixed: disabling [ 4.569979] ldousb: disabling [ 4.570448] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.571101] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.587785] mmcblk1: p1 [ 4.595384] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.446782] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.521008] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.531336] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.605561] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.615886] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.690060] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.700382] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.774599] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.784925] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.859103] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.869429] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.943656] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.953981] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.028177] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.038532] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.112785] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.123109] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.197270] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.207590] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.281811] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.292127] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.366338] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.376656] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.450871] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.461191] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.535400] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.545719] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.619878] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.630196] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.704423] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.714748] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.788905] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.799224] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.063939] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.137924] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.148001] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.221984] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.232059] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.306038] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.316121] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.390106] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.400187] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.474177] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.484258] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.558243] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.568313] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.642300] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.652374] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.726387] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.736459] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.810444] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.820519] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.894501] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.904569] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.978552] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.988630] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.062613] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.072688] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.146672] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.156749] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.230730] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.240809] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.314793] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.324869] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.398845] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.408919] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:03]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:04]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.811206] can: netlink gateway (rev 20130117) max_hops=1 [ 2.818184] Key type dns_resolver registered [ 2.824647] ThumbEE CPU extension supported. [ 2.829036] Registering SWP/SWPB emulation handler [ 2.843328] usb1_vbus: supplied by vdd-sys-5v0 [ 2.852086] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870897] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.895412] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.902174] [drm] No driver support for vblank timestamp query. [ 2.917154] mmc1: new MMC card at address 0001 [ 2.925348] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.933289] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.942709] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.952262] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.963715] mmcblk1: p1 [ 3.081542] Console: switching to colour frame buffer device 240x75 [ 3.170896] drm drm: fb0: frame buffer device [ 3.188738] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.203866] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.209457] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.218283] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.233750] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.244078] hub 1-0:1.0: USB hub found [ 3.248095] hub 1-0:1.0: 1 port detected [ 3.258243] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.271929] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.334988] dvdd_ts: disabling [ 3.338087] usb1_vbus: disabling [ 3.341459] vdd_cam_1v8_reg: disabling [ 3.348889] Waiting for root device /dev/mmcblk0p1... [ 3.558750] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.537367] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.178715] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:06]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:08]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.811157] can: netlink gateway (rev 20130117) max_hops=1 [ 2.818147] Key type dns_resolver registered [ 2.824616] ThumbEE CPU extension supported. [ 2.829008] Registering SWP/SWPB emulation handler [ 2.845093] usb1_vbus: supplied by vdd-sys-5v0 [ 2.855484] usb2_vbus: supplied by vdd-sys-5v0 [ 2.874935] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.900222] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.906976] [drm] No driver support for vblank timestamp query. [ 2.916510] mmc1: new MMC card at address 0001 [ 2.923068] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.930250] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.937352] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.945763] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.957273] mmcblk1: p1 [ 3.084836] Console: switching to colour frame buffer device 240x75 [ 3.173959] drm drm: fb0: frame buffer device [ 3.203591] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.218810] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.224469] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.233163] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.248622] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.258995] hub 1-0:1.0: USB hub found [ 3.262995] hub 1-0:1.0: 1 port detected [ 3.273651] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.288550] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.350127] dvdd_ts: disabling [ 3.353391] usb1_vbus: disabling [ 3.356656] vdd_cam_1v8_reg: disabling [ 3.364177] Waiting for root device /dev/mmcblk0p1... [ 3.578646] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.557471] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.101233] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.383805] Bluetooth: RFCOMM socket layer initialized [ 5.389026] Bluetooth: RFCOMM ver 1.11 [ 5.392840] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.398324] Bluetooth: BNEP socket layer initialized [ 5.403379] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.409381] Bluetooth: HIDP socket layer initialized [ 5.415697] Key type dns_resolver registered [ 5.425143] Registering SWP/SWPB emulation handler [ 5.443798] usb1_vbus: supplied by vdd-sys-5v0 [ 5.454030] usb2_vbus: supplied by vdd-sys-5v0 [ 5.470940] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.501411] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.508315] [drm] No driver support for vblank timestamp query. [ 5.686336] Console: switching to colour frame buffer device 240x75 [ 5.775635] drm drm: fb0: frame buffer device [ 5.803686] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.812863] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.818628] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.827744] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.853609] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.866978] hub 1-0:1.0: USB hub found [ 5.871020] hub 1-0:1.0: 1 port detected [ 5.884777] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.900789] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 5.989312] dvdd_ts: disabling [ 5.992424] usb1_vbus: disabling [ 5.995814] vdd_cam_1v8_reg: disabling [ 6.000390] ALSA device list: [ 6.003436] #0: NVIDIA Tegra Dalmore [ 6.009182] Waiting for root device /dev/mmcblk0p1... [ 6.193575] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.228166] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 48.583561] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.705951] NET: Registered protocol family 10 [ 1.706558] sit: IPv6 over IPv4 tunneling driver [ 1.711655] NET: Registered protocol family 17 [ 1.714899] NET: Registered protocol family 15 [ 1.719384] Key type dns_resolver registered [ 1.723696] Registering SWP/SWPB emulation handler [ 1.731624] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.736263] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.743674] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.750844] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.757418] [drm] No driver support for vblank timestamp query. [ 1.763335] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.769684] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.774709] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.782125] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.788613] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 25000000Hz, actual 22000000HZ div = 1) [ 1.797944] mmc1: new MMC card at address 0001 [ 1.802888] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.807036] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.812094] max98090 1-0010: MAX98090 REVID=0x43 [ 1.814396] max98090 1-0010: use default 2.8v micbias [ 1.822726] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.828523] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.834800] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.842203] mmcblk1: p1 p2 [ 1.844333] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.883144] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.905051] VDD10_HDMI_1.0V: disabling [ 1.905783] vdd_g3d: disabling [ 1.906857] BUCK8_2.8V: disabling [ 1.910883] ALSA device list: [ 1.912478] #0: Odroid-U3 [ 1.916324] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.253246] r3 : 00000000 r2 : 00010000 r1 : 00000000 r0 : ffff1750 [ 2.260076] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.267636] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.273647] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.279933] Stack: (0xc1301e78 to 0xc1302000) [ 2.284489] 1e60: 8072b0c0 00000000 [ 2.293050] 1e80: c1301e94 c058feb4 ffff1750 c06fa404 77359400 00000000 00000000 eefc8e90 [ 2.301609] 1ea0: 00000000 ffff1750 00000001 808e9352 00000000 8072b0c0 00000000 c03a67ec [ 2.310170] 1ec0: 00000000 c0ef3bb4 00000000 ee0ce0c0 eefcde40 00000000 808e9352 00000000 [ 2.318729] 1ee0: ffffffff 7fffffff c1302510 ffffe000 00000000 00000000 00000001 ee008000 [ 2.327283] 1f00: fa213000 c140d3a8 c1302510 c0346520 c12124dc c0385568 c1302870 c1340578 [ 2.335843] 1f20: fa21200c c1301f50 fa212000 c03017a0 c0308780 a0000013 ffffffff c1301f84 [ 2.344404] 1f40: c1213580 c1302508 c140d3a8 c030c514 00000001 00000000 ea000013 f0880000 [ 2.352963] 1f60: c1300000 c13024a4 00000000 00000000 c1213580 c1302508 c140d3a8 c1302510 [ 2.361524] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.370082] 1fa0: c1300000 c03791e8 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.378640] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a5a30 c140f5d4 c1302480 [ 2.387200] 1fe0: c11a5a2c c130764c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.395761] [<c0b87fb4>] (_raw_spin_lock) from [<c03959c0>] (get_next_timer_interrupt+0x64/0x2f4) [ 2.405054] [<c03959c0>] (get_next_timer_interrupt) from [<c03a67ec>] (__tick_nohz_idle_enter+0x2f8/0x414) [ 2.415163] [<c03a67ec>] (__tick_nohz_idle_enter) from [<c0346520>] (irq_exit+0xc8/0x114) [ 2.423727] [<c0346520>] (irq_exit) from [<c0385568>] (__handle_domain_irq+0x60/0xb4) [ 2.431924] [<c0385568>] (__handle_domain_irq) from [<c03017a0>] (gic_handle_irq+0x54/0x94) [ 2.440666] [<c03017a0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.448495] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.453779] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.462342] 1f60: c1300000 c13024a4 00000000 00000000 c1213580 c1302508 c140d3a8 c1302510 [ 2.470900] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff [ 2.477821] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.485565] [<c0308780>] (arch_cpu_idle) from [<c03791e8>] (cpu_startup_entry+0x1bc/0x218) [ 2.494215] [<c03791e8>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.502774] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.509604] Code: eaffffab f590f000 e1903f9f e2832801 (e1801f92) [ 2[ 2.515986] In [PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.248160] r3 : 00000000 r2 : 00000000 r1 : c1306480 r0 : c1301ed8 [ 2.254989] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.262546] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.268557] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.274843] Stack: (0xc1301e90 to 0xc1302000) [ 2.279400] 1e80: 77359400 0d999a2a 00000000 eefc8e90 [ 2.287967] 1ea0: 00000000 ffffe000 00000001 ee008000 fa213000 c140d3a8 c1302510 c03a651c [ 2.296531] 1ec0: 00000000 c0ef3bb4 00000000 ee1840c0 ee184120 00000000 00000001 ee008000 [ 2.305090] 1ee0: fa213000 c140d3a8 c1302510 ffffe000 00000000 00000000 00000001 ee008000 [ 2.313652] 1f00: fa213000 c140d3a8 c1302510 c0346520 c12124dc c0385568 c1302870 c1340578 [ 2.322214] 1f20: fa21200c c1301f50 fa212000 c03017a0 c0308780 a0000013 ffffffff c1301f84 [ 2.330779] 1f40: c1213580 c1302508 c140d3a8 c030c514 00000001 00000000 ea000013 f0880000 [ 2.339339] 1f60: c1300000 c13024a4 00000000 00000000 c1213580 c1302508 c140d3a8 c1302510 [ 2.347900] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.356461] 1fa0: c1300000 c03791e8 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.365024] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a5a30 c140f5d4 c1302480 [ 2.373586] 1fe0: c11a5a2c c130764c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.382153] [<c039bda4>] (ktime_get) from [<c03a651c>] (__tick_nohz_idle_enter+0x28/0x414) [ 2.390808] [<c03a651c>] (__tick_nohz_idle_enter) from [<c0346520>] (irq_exit+0xc8/0x114) [ 2.399375] [<c0346520>] (irq_exit) from [<c0385568>] (__handle_domain_irq+0x60/0xb4) [ 2.407575] [<c0385568>] (__handle_domain_irq) from [<c03017a0>] (gic_handle_irq+0x54/0x94) [ 2.416320] [<c03017a0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.424153] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.429439] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.438003] 1f60: c1300000 c13024a4 00000000 00000000 c1213580 c1302508 c140d3a8 c1302510 [ 2.446565] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff [ 2.453494] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.461237] [<c0308780>] (arch_cpu_idle) from [<c03791e8>] (cpu_startup_entry+0x1bc/0x218) [ 2.469896] [<c03791e8>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.478459] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.485293] Code: e3530000 1a00002c e3064bc0 e34c4143 (e5945040) [ 2.491670] ---[ end trace 3e3fb658d3f2b26c ]--- [ 2.491672] Internal error: Oops: 805 [#2] SMP ARM [ 2.491676] Mod [PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.891945] Registering SWP/SWPB emulation handler [ 1.900656] VDDIO_HDMI: supplied by vdd_5v0 [ 1.906273] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.917519] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.924000] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.929438] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.937918] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.952564] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.959306] hub 3-0:1.0: USB hub found [ 1.963111] hub 3-0:1.0: 1 port detected [ 1.973521] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.980145] [drm] No driver support for vblank timestamp query. [ 1.991855] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 2.005385] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.013886] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.026615] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.031372] mmc2: new MMC card at address 0001 [ 2.031864] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.032098] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.032329] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.034762] mmcblk2: p3 [ 2.045323] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.048716] mmc0: new SDIO card at address 0001 [ 2.050387] Console: switching to colour frame buffer device 170x48 [ 2.108830] drm drm: fb0: frame buffer device [ 2.126524] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.133131] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.140101] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.153421] vdd_1v5: disabling [ 2.156473] vdd_1v2: disabling [ 2.770986] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.782414] Waiting for root device /dev/mmcblk0p3... [ 58.023104] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:54]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:55]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.399980] can: raw protocol (rev 20120528) [ 4.404259] can: broadcast manager protocol (rev 20120528 t) [ 4.409984] can: netlink gateway (rev 20130117) max_hops=1 [ 4.445489] Bluetooth: RFCOMM socket layer initialized [ 4.450655] Bluetooth: RFCOMM ver 1.11 [ 4.454421] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.459791] Bluetooth: BNEP socket layer initialized [ 4.464752] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.470725] Bluetooth: HIDP socket layer initialized [ 4.476462] Key type dns_resolver registered [ 4.482202] Registering SWP/SWPB emulation handler [ 4.497822] VDDIO_HDMI: supplied by vdd_5v0 [ 4.504700] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.516687] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.523164] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.528667] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.537040] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.555229] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.564950] hub 3-0:1.0: USB hub found [ 4.568841] hub 3-0:1.0: 1 port detected [ 4.583309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.589993] [drm] No driver support for vblank timestamp query. [ 4.714693] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.736382] Console: switching to colour frame buffer device 170x48 [ 4.776429] drm drm: fb0: frame buffer device [ 4.805206] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.812359] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.819970] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.838708] vdd_1v5: disabling [ 4.841774] vdd_1v2: disabling [ 4.844919] ALSA device list: [ 4.847934] #0: NVIDIA Tegra Seaboard [ 4.852433] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:49]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:50]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938537] usbcore: registered new interface driver usbhid [ 1.944152] usbhid: USB HID core driver [ 1.958526] NET: Registered protocol family 10 [ 1.964416] sit: IPv6 over IPv4 tunneling driver [ 1.969696] NET: Registered protocol family 17 [ 1.974182] can: controller area network core (rev 20120528 abi 9) [ 1.980407] NET: Registered protocol family 29 [ 1.984893] can: raw protocol (rev 20120528) [ 1.989166] can: broadcast manager protocol (rev 20120528 t) [ 1.994812] can: netlink gateway (rev 20130117) max_hops=1 [ 2.000854] Key type dns_resolver registered [ 2.005310] ThumbEE CPU extension supported. [ 2.009429] mmc3: new MMC card at address 0001 [ 2.014038] Registering SWP/SWPB emulation handler [ 2.014221] mmcblk3: mmc3:0001 3.53 GiB [ 2.014434] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.014617] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.014770] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.021148] mmcblk3: p1 p2 p3 p4 [ 2.044555] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.051330] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.060485] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.067504] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.074493] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.081481] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.094787] db8500-esram12: disabling [ 2.098724] db8500-esram34: disabling [ 2.102416] en-3v3-fixed-supply: disabling [ 2.106750] V-CSI/DSI: disabling [ 2.110046] mmci-reg: disabling [ 2.113708] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.119689] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.126037] Waiting for root device /dev/mmcblk0p4...
[PYBOOT] [snowball 02:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:13]: got exception: timeout ~$off
[PYBOOT] [snowball 02:14]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.718048] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.730682] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.741394] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.751312] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.762023] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.785034] NET: Registered protocol family 10 [ 2.790283] sit: IPv6 over IPv4 tunneling driver [ 2.795562] NET: Registered protocol family 17 [ 2.800079] NET: Registered protocol family 35 [ 2.804626] NET: Registered protocol family 37 [ 2.809173] Registering SWP/SWPB emulation handler [ 2.815765] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.822814] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-22 02:35:48 UTC (956370948) [ 2.832000] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.838989] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.845977] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.852966] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.866455] db8500-esram12: disabling [ 2.870208] db8500-esram34: disabling [ 2.873931] en-3v3-fixed-supply: disabling [ 2.878204] V-CSI/DSI: disabling [ 2.881500] mmci-reg: disabling [ 2.884765] ALSA device list: [ 2.887756] #0: MOP500-card [ 2.891052] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.897003] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.903198] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:55]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter