Automated DT boot report for various ARM defconfigs.
Tree/Branch: next Git describe: next-20140116 Failed boot tests (console logs at the end) =========================================== exynos5250-arndale: FAIL: exynos_defconfig omap4-panda-es: FAIL: multi_v7_defconfig
Full Report ===========
omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.2 sec omap3-beagle-xm PASS: 0 min 58.2 sec am335x-bone PASS: 0 min 26.8 sec omap4-panda PASS: 1 min 5.8 sec omap4-panda-es PASS: 1 min 4.9 sec omap3-tobi,3730storm PASS: 0 min 23.8 sec omap3-tobi,3530overo PASS: 0 min 25.3 sec
tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.0 sec imx6q-wandboard PASS: 0 min 15.7 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.3 sec
bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.6 sec
exynos_defconfig ---------------- exynos5250-arndale FAIL: 1 min 25.2 sec
multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.1 sec tegra30-beaver PASS: 0 min 21.1 sec am335x-boneblack PASS: 0 min 22.8 sec omap3-beagle-xm PASS: 0 min 50.4 sec sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec armada-370-mirabox PASS: 0 min 21.5 sec omap4-panda PASS: 0 min 51.0 sec omap4-panda-es FAIL: 1 min 45.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.7 sec bcm28155-ap PASS: 1 min 9.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone PASS: 0 min 25.4 sec imx6q-wandboard PASS: 0 min 16.7 sec omap3-tobi,3730storm PASS: 0 min 23.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec omap3-tobi,3530overo PASS: 0 min 20.8 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 33.0 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.2 sec
Console logs for failures =========================
exynos_defconfig ----------------
exynos5250-arndale: FAIL: last 24 lines of boot log: ----------------------------------------------------
[ 1.870085] VDD_33ON_2.8V: disabling [ 1.881063] exynos-dp 145b0000.dp-controller: unable to find phy [ 1.886960] platform 145b0000.dp-controller: Driver exynos-dp requests probe deferral [ 1.887265] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.887351] mmc0: new high speed DDR MMC card at address 0001 [ 1.910581] isa bounce pool size: 16 pages [ 1.914429] mmcblk0: mmc0:0001 M4G1FA 3.72 GiB [ 1.919026] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB [ 1.924932] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB [ 1.930827] mmcblk0rpmb: mmc0:0001 M4G1FA partition 3 128 KiB [ 1.937537] mmcblk0: p1 p2 p3 p4 [ 1.942002] mmcblk0boot1: unknown partition table [ 1.946261] mmcblk0boot0: unknown partition table [ 2.111039] exynos-dp 145b0000.dp-controller: unable to find phy [ 2.115608] platform 145b0000.dp-controller: Driver exynos-dp requests probe deferral [ 2.124339] input: gpio_keys.4 as /devices/gpio_keys.4/input/input0 [ 2.130055] exynos-dp 145b0000.dp-controller: unable to find phy [ 2.135687] s3c-rtc 101e0000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.144169] platform 145b0000.dp-controller: Driver exynos-dp requests probe deferral [ 2.153030] Waiting for root device /dev/mmcblk1p3... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 85.16 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------
scanning usb for ethernet devices... 1 Ethernet Device(s) found Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.163 Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'omap2/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################### 2.2 MiB/s done Bytes transferred = 4112320 (3ebfc0 hex) Wrong Image Format for bootm command ERROR: can't get kernel image! ** File not found /boot/omap2/zImage ** Panda # ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 105.08 seconds. # PYBOOT: Result: FAIL
kernel-build-reports@lists.linaro.org