Failed boards:
cubie2 sunxi_defconfig : FAILED 1:18.33 hummingboard multi_v7_defconfig : FAILED 1:04.09 snowball multi_v7_defconfig : FAILED 1:10.68 wandboard multi_v7_defconfig : FAILED 1:04.92
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:16.83 arndale exynos_defconfig : passed 1:02.30 bbb omap2plus_defconfig : passed 1:31.13 bbb multi_v7_defconfig : passed 1:17.98 beaver tegra_defconfig : passed 0:49.54 beaver multi_v7_defconfig : passed 0:48.73 capri bcm_defconfig : passed 0:41.81 capri multi_v7_defconfig : passed 0:43.04 cubie sunxi_defconfig : passed 0:55.68 cubie multi_v7_defconfig : passed 0:56.14 cubie2 multi_v7_defconfig : passed 1:00.40 cubie2 multi_lpae_defconfig : passed 0:50.95 dalmore tegra_defconfig : passed 1:14.45 dalmore multi_v7_defconfig : passed 1:20.26 dalmore multi_lpae_defconfig : passed 1:17.61 hummingboard imx_v6_v7_defconfig : passed 1:20.27 omap5uevm omap2plus_defconfig : warnings 1:11.24 omap5uevm multi_v7_defconfig : warnings 1:50.64 omap5uevm multi_lpae_defconfig : warnings 1:38.88 panda omap2plus_defconfig : warnings 1:14.00 panda multi_v7_defconfig : passed 1:28.43 sama5 sama5_defconfig : passed 1:49.41 seaboard tegra_defconfig : passed 0:56.29 seaboard multi_v7_defconfig : passed 1:08.52 snow exynos_defconfig : passed 1:29.25 snowball u8500_defconfig : passed 1:45.20 trimslice tegra_defconfig : passed 0:54.42 trimslice multi_v7_defconfig : passed 1:07.84 wandboard imx_v6_v7_defconfig : passed 0:53.81
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.017862] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017885] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017899] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017921] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017933] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018888] Switched to clocksource arch_sys_counter [ 0.026014] NET: Registered protocol family 2 [ 0.026482] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026569] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026690] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026776] TCP: reno registered [ 0.026790] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026847] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027039] NET: Registered protocol family 1 [ 0.027433] RPC: Registered named UNIX socket transport module. [ 0.027446] RPC: Registered udp transport module. [ 0.027451] RPC: Registered tcp transport module. [ 0.027457] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028420] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028977] bounce pool size: 64 pages [ 0.036802] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036821] io scheduler noop registered [ 0.036827] io scheduler deadline registered [ 0.037009] io scheduler cfq registered (default) [ 0.038657] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080537] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082975] console [ttyS0] disabled [ 0.103177] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618180] console [ttyS0] enabled [ 0.622886] mousedev: PS/2 mouse device common for all mice [ 0.628709] i2c /dev entries driver [ 0.633576] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642570] TCP: cubic registered [ 0.645890] NET: Registered protocol family 17 [ 0.650453] Registering SWP/SWPB emulation handler [ 0.656166] ahci-5v: 5000 mV [ 0.659453] usb1-vbus: 5000 mV [ 0.662815] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot > tftp 0x10800000 next/next-20140408/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140408/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'next/next-20140408/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2 MiB/s done Bytes transferred = 4628080 (469e70 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140408/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140408/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'next/next-20140408/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 817.4 KiB/s done Bytes transferred = 25956 (6564 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x469e70 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009563
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-kQjoc1/tmpkOTW6R-uImage tftp 0x00100000 tmp/snowball-kQjoc1/tmpkOTW6R-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-kQjoc1/tmpkOTW6R-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 4669393 (473fd1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4669329 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 next/next-20140408/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'next/next-20140408/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 6.1 MiB/s done Bytes transferred = 4628080 (469e70 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140408/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140408/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'next/next-20140408/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.2 MiB/s done Bytes transferred = 29394 (72d2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x469e70 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2d1
Starting kernel ...
node: wandboard status: on ~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org
-
Olof's autobooter