Failed boards:

beaver multi_v7_defconfig : FAILED 1:27.39 capri bcm_defconfig : FAILED 1:23.83 capri multi_v7_defconfig : FAILED 1:25.28 cubox multi_v7_defconfig : FAILED 1:34.09 dalmore multi_v7_defconfig : FAILED 1:33.19 dalmore multi_lpae_defconfig : FAILED 1:31.16 hummingboard multi_v7_defconfig : FAILED 1:27.61 jetson multi_v7_defconfig : FAILED 1:28.59 jetson multi_lpae_defconfig : FAILED 1:26.41 seaboard multi_v7_defconfig : FAILED 0:39.31 snow multi_v7_defconfig : FAILED 1:13.79 snowball u8500_defconfig : FAILED 1:48.11 wandboard multi_v7_defconfig : FAILED 1:34.44

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:14.09 arndale exynos_defconfig : passed 1:15.03 arndale multi_v7_defconfig : passed 1:29.45 arndale multi_lpae_defconfig : passed 1:20.49 bbb omap2plus_defconfig : passed 1:30.29 bbb multi_v7_defconfig : passed 1:22.38 cubie sunxi_defconfig : passed 1:19.18 cubie multi_v7_defconfig : warnings 1:24.22 cubie2 sunxi_defconfig : passed 1:23.89 cubie2 multi_v7_defconfig : passed 1:29.20 cubie2 multi_lpae_defconfig : passed 1:23.41 dalmore tegra_defconfig : passed 1:26.63 hummingboard imx_v6_v7_defconfig : passed 1:13.77 jetson tegra_defconfig : passed 1:00.44 omap5uevm omap2plus_defconfig : warnings 1:01.93 omap5uevm multi_v7_defconfig : warnings 2:02.83 omap5uevm multi_lpae_defconfig : warnings 1:59.19 panda omap2plus_defconfig : warnings 1:33.14 panda multi_v7_defconfig : warnings 1:42.54 sama5 sama5_defconfig : warnings 2:01.93 seaboard tegra_defconfig : passed 1:12.49 snow exynos_defconfig : passed 1:29.56 snow multi_lpae_defconfig : passed 1:25.33 snowball multi_v7_defconfig : passed 3:26.21 trimslice tegra_defconfig : passed 1:24.31 trimslice multi_v7_defconfig : passed 1:14.16 wandboard imx_v6_v7_defconfig : passed 1:00.14

Offline boards:

beaver tegra_defconfig : OFFLINE 0:37.97

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board beaver-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.567030] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.573123] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.578086] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.584175] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.591925] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.599044] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.604638] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.611020] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.621015] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.631478] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.638107] [drm] No driver support for vblank timestamp query. [ 3.644057] host1x drm: No connectors reported connected with modes [ 3.650322] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.674808] Console: switching to colour frame buffer device 128x48 [ 3.686528] host1x drm: fb0: frame buffer device [ 3.691224] host1x drm: registered panic notifier [ 3.708618] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.714896] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.722348] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.733836] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.739243] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.747057] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.758224] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.764589] hub 1-0:1.0: USB hub found [ 3.768366] hub 1-0:1.0: 1 port detected [ 3.772739] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.778153] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.785900] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.798606] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.804913] hub 2-0:1.0: USB hub found [ 3.808684] hub 2-0:1.0: 1 port detected [ 3.816632] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.829460] usb1_vbus: disabling [ 3.832860] ALSA device list: [ 3.835859] #0: NVIDIA Tegra Beaver [ 3.840102] Waiting for root device /dev/mmcblk0p1... [ 4.118631] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.587393] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout

========================================================================

Board capri-bcm_defconfig failure log: -------------------------------------------------

[ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout

========================================================================

Board capri-multi_v7_defconfig failure log: -------------------------------------------------

[ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout

========================================================================

Board cubox-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.226083] hub 2-0:1.0: 1 port detected [ 1.230460] SPEAr-ehci: EHCI SPEAr driver [ 1.234569] tegra-ehci: Tegra EHCI driver [ 1.238701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244889] ohci-pci: OHCI PCI platform driver [ 1.249395] ohci-platform: OHCI generic platform driver [ 1.254708] ohci-omap3: OHCI OMAP3 driver [ 1.258808] SPEAr-ohci: OHCI SPEAr driver [ 1.263552] usbcore: registered new interface driver usb-storage [ 1.271106] mousedev: PS/2 mouse device common for all mice [ 1.278122] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287438] i2c /dev entries driver [ 1.292896] usbcore: registered new interface driver uvcvideo [ 1.298643] USB Video Class driver (1.1.1) [ 1.302738] gspca_main: v2.14.0 registered [ 1.309983] orion_wdt: Initial timeout 25 sec [ 1.315490] sdhci: Secure Digital Host Controller Interface driver [ 1.321653] sdhci: Copyright(c) Pierre Ossman [ 1.326565] Synopsys Designware Multimedia Card Interface Driver [ 1.333252] usbcore: registered new interface driver usbhid [ 1.338813] usbhid: USB HID core driver [ 1.346700] TCP: cubic registered [ 1.350011] NET: Registered protocol family 17 [ 1.354482] can: controller area network core (rev 20120528 abi 9) [ 1.360724] NET: Registered protocol family 29 [ 1.365171] can: raw protocol (rev 20120528) [ 1.369422] can: broadcast manager protocol (rev 20120528 t) [ 1.375072] can: netlink gateway (rev 20130117) max_hops=1 [ 1.380947] Key type dns_resolver registered [ 1.385421] ThumbEE CPU extension supported. [ 1.389689] Registering SWP/SWPB emulation handler [ 1.394480] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399184] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405670] USB Power: 5000 mV [ 1.409197] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-19 19:39:15 UTC (1403206755) [ 1.419710] ALSA device list: [ 1.422686] No soundcards found. [ 1.426607] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

========================================================================

Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.975271] i2c 0-004c: Driver lm90 requests probe deferral [ 2.982768] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.988374] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.998344] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.004806] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.015151] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.020797] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.030875] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.046651] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.056210] hub 1-0:1.0: USB hub found [ 3.060222] hub 1-0:1.0: 1 port detected [ 3.066719] i2c 0-004c: Driver lm90 requests probe deferral [ 3.074302] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.079932] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.089994] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.096554] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.108660] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.116957] i2c 0-004c: Driver lm90 requests probe deferral [ 3.122653] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.161727] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.161743] VDD_5V0_HDMI_CON: disabling [ 3.161775] vdd_cam_1v8_reg: disabling [ 3.162242] vdd_hdmi_5v0: disabling [ 3.162259] usb1_vbus: disabling [ 3.162277] dvdd_ts: disabling [ 3.166579] ALSA device list: [ 3.166598] #0: NVIDIA Tegra Dalmore [ 3.191795] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.194915] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.195156] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.215675] Waiting for root device /dev/mmcblk0p1... [ 3.371945] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.855459] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.866994] i2c 0-004c: Driver lm90 requests probe deferral [ 3.874635] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.880250] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.890194] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.896672] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout

========================================================================

Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.960544] i2c 0-004c: Driver lm90 requests probe deferral [ 2.968060] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.973672] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.983630] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.990141] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.000674] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.006315] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.015584] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.031878] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041126] hub 1-0:1.0: USB hub found [ 3.045129] hub 1-0:1.0: 1 port detected [ 3.051400] i2c 0-004c: Driver lm90 requests probe deferral [ 3.058940] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064587] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074603] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.081115] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.093145] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.101432] i2c 0-004c: Driver lm90 requests probe deferral [ 3.107132] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.145368] VDD_5V0_HDMI_CON: disabling [ 3.149394] vdd_cam_1v8_reg: disabling [ 3.153641] vdd_hdmi_5v0: disabling [ 3.157312] usb1_vbus: disabling [ 3.160575] dvdd_ts: disabling [ 3.168115] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.168801] ALSA device list: [ 3.168817] #0: NVIDIA Tegra Dalmore [ 3.180577] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.183593] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.183839] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.203459] Waiting for root device /dev/mmcblk0p1... [ 3.362122] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.845668] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.857191] i2c 0-004c: Driver lm90 requests probe deferral [ 3.864704] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.870339] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.880178] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.886665] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout

========================================================================

Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.031663] usbcore: registered new interface driver usb-storage [ 1.042829] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.048044] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052986] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065401] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071595] hub 1-0:1.0: USB hub found [ 1.075409] hub 1-0:1.0: 1 port detected [ 1.083092] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088201] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093128] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105412] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111572] hub 2-0:1.0: USB hub found [ 1.115405] hub 2-0:1.0: 1 port detected [ 1.120147] mousedev: PS/2 mouse device common for all mice [ 1.128384] i2c /dev entries driver [ 1.133084] usbcore: registered new interface driver uvcvideo [ 1.138863] USB Video Class driver (1.1.1) [ 1.142984] gspca_main: v2.14.0 registered [ 1.149736] sdhci: Secure Digital Host Controller Interface driver [ 1.155951] sdhci: Copyright(c) Pierre Ossman [ 1.161151] Synopsys Designware Multimedia Card Interface Driver [ 1.168097] usbcore: registered new interface driver usbhid [ 1.173699] usbhid: USB HID core driver [ 1.182425] TCP: cubic registered [ 1.185791] NET: Registered protocol family 17 [ 1.190262] can: controller area network core (rev 20120528 abi 9) [ 1.196521] NET: Registered protocol family 29 [ 1.200996] can: raw protocol (rev 20120528) [ 1.205278] can: broadcast manager protocol (rev 20120528 t) [ 1.210972] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216869] Key type dns_resolver registered [ 1.221325] ThumbEE CPU extension supported. [ 1.225641] Registering SWP/SWPB emulation handler [ 1.231609] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246730] ALSA device list: [ 1.249714] No soundcards found. [ 1.253826] Waiting for root device /dev/mmcblk0p2... [ 60.320525] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

========================================================================

Board jetson-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.253770] hub 1-0:1.0: USB hub found [ 2.257601] hub 1-0:1.0: 1 port detected [ 2.262621] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.271061] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.275614] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.283447] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.290102] [drm] No driver support for vblank timestamp query. [ 2.296091] host1x drm: No connectors reported connected with modes [ 2.302387] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.317465] Console: switching to colour frame buffer device 128x48 [ 2.330982] host1x drm: fb0: frame buffer device [ 2.335716] host1x drm: registered panic notifier [ 2.351987] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.358558] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.363994] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.371805] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.386973] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.393786] hub 2-0:1.0: USB hub found [ 2.397597] hub 2-0:1.0: 1 port detected [ 2.402707] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.410086] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:19 UTC (949363219) [ 2.428236] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.432783] +1.8V_RUN_VPP_FUSE: disabling [ 2.437206] +2.8V_RUN_CAM_AF: disabling [ 2.441390] +3.3V_RUN_TOUCH: disabling [ 2.445509] +1.05V_RUN_CAM_REAR: disabling [ 2.449752] +VDDIO_SDMMC3: disabling [ 2.453458] +1.2V_RUN_CAM_FRONT: disabling [ 2.457681] +2.8V_RUN_CAM: disabling [ 2.461370] +1.8V_RUN_CAM: disabling [ 2.465074] +1.05V_RUN: disabling [ 2.468518] +USB0_VBUS_SW: disabling [ 2.472103] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.476975] ALSA device list: [ 2.479938] #0: NVIDIA Tegra Jetson TK1 [ 2.484567] Waiting for root device /dev/mmcblk0p1... [ 2.706959] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.169805] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout

========================================================================

Board jetson-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.238865] hub 1-0:1.0: USB hub found [ 2.242697] hub 1-0:1.0: 1 port detected [ 2.247701] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.256140] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.260691] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.268657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.275312] [drm] No driver support for vblank timestamp query. [ 2.281303] host1x drm: No connectors reported connected with modes [ 2.287608] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.302744] Console: switching to colour frame buffer device 128x48 [ 2.316442] host1x drm: fb0: frame buffer device [ 2.321176] host1x drm: registered panic notifier [ 2.337085] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.343650] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.349089] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.356895] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.372071] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.378878] hub 2-0:1.0: USB hub found [ 2.382696] hub 2-0:1.0: 1 port detected [ 2.387797] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.395161] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.413159] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.417707] +1.8V_RUN_VPP_FUSE: disabling [ 2.422124] +2.8V_RUN_CAM_AF: disabling [ 2.426307] +3.3V_RUN_TOUCH: disabling [ 2.430425] +1.05V_RUN_CAM_REAR: disabling [ 2.434670] +VDDIO_SDMMC3: disabling [ 2.438375] +1.2V_RUN_CAM_FRONT: disabling [ 2.442599] +2.8V_RUN_CAM: disabling [ 2.446288] +1.8V_RUN_CAM: disabling [ 2.449992] +1.05V_RUN: disabling [ 2.453435] +USB0_VBUS_SW: disabling [ 2.457021] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.461883] ALSA device list: [ 2.464857] #0: NVIDIA Tegra Jetson TK1 [ 2.469488] Waiting for root device /dev/mmcblk0p1... [ 2.692058] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.154890] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout

========================================================================

Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.157189] hub 3-0:1.0: USB hub found [ 2.160982] hub 3-0:1.0: 1 port detected [ 2.165924] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.172860] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-19 19:40:21 UTC (1403206821) [ 2.185253] vdd_1v2: disabling [ 2.188492] vdd_1v5: disabling [ 2.192409] ALSA device list: [ 2.195369] #0: NVIDIA Tegra Seaboard [ 2.199826] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.207586] Please append a correct "root=" boot option; here are the available partitions: [ 2.215943] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.224193] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-00112-g894e552 #1 [ 2.231772] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.239510] [<c0211c68>] (show_stack) from [<c0811c18>] (dump_stack+0x88/0x98) [ 2.246721] [<c0811c18>] (dump_stack) from [<c080ea68>] (panic+0xa0/0x218) [ 2.253590] [<c080ea68>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.261061] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.268963] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.276954] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.285810] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cd60>] (kernel_init+0x8/0xf0) [ 2.293886] [<c080cd60>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.301444] CPU1: stopping [ 2.304147] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-00112-g894e552 #1 [ 2.311713] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.319446] [<c0211c68>] (show_stack) from [<c0811c18>] (dump_stack+0x88/0x98) [ 2.326656] [<c0811c18>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.334037] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.341592] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.349056] Exception stack(0xea087f30 to 0xea087f78) [ 2.354096] 7f20: 00000000 c0bc1fb4 c0bc1fb4 0000004c [ 2.362256] 7f40: 817a8ba0 00000000 8924a098 00000000 eafb6db0 c0c9c7a8 00000000 ea479e64 [ 2.370416] 7f60: 00000015 ea087f78 c06b3000 c06b300c 60000113 ffffffff [ 2.377023] [<c02127c0>] (__irq_svc) from [<c06b300c>] (cpuidle_enter_state+0x68/0x100) [ 2.385017] [<c06b300c>] (cpuidle_enter_state) from [<c06b4b70>] (cpuidle_enter_state_coupled+0x130/0x378) [ 2.394660] [<c06b4b70>] (cpuidle_enter_state_coupled) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.404124] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.410896] drm_kms_helper: panic occurred, switching back to text console [ 2.417777] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic

========================================================================

Board snow-multi_v7_defconfig failure log: -------------------------------------------------

[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0ad619c (9017 kB) [ 0.000000] .init : 0xc0ad7000 - 0xc0b7c100 ( 661 kB) [ 0.000000] .data : 0xc0b7e000 - 0xc0c5c740 ( 890 kB) [ 0.000000] .bss : 0xc0c5c748 - 0xc0ca8788 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.654054] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.654603] Console: colour dummy device 80x30 [ 2889.654614] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.654622] pid_max: default: 32768 minimum: 301 [ 2889.654682] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.654688] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.654958] CPU: Testing write buffer coherency: ok [ 2889.655070] CPU0: update cpu_capacity 1024 [ 2889.655076] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.655168] Setting up static identity map for 0x40817698 - 0x40817730 [ 2889.656263] CPU1: Booted secondary processor [ 2889.656297] CPU1: update cpu_capacity 1024 [ 2889.656300] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.656343] Brought up 2 CPUs [ 2889.656352] SMP: Total of 2 processors activated. [ 2889.656356] CPU: All CPU(s) started in HYP mode. [ 2889.656359] CPU: Virtualization extensions available. [ 2889.656602] devtmpfs: initialized [ 2889.658499] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.658695] pinctrl~$off # PYBOOT: Exception: timeout

========================================================================

Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.637115] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645019] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.656951] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664276] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675750] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684265] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696166] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703491] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.714996] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.722808] HS USB OTG: no transceiver configured [ 3.727508] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735351] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743255] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755187] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762512] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.773986] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782501] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794433] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.801727] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813232] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821044] HS USB OTG: no transceiver configured [ 3.825744] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833587] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841522] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853424] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.860748] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872222] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.880767] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.892669] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.899993] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911468] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919281] HS USB OTG: no transceiver configured [ 3.923980] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.931854] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.939758] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.951690] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.958984] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970458] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

========================================================================

Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.070077] ohci-platform: OHCI generic platform driver [ 1.075461] ohci-omap3: OHCI OMAP3 driver [ 1.079623] SPEAr-ohci: OHCI SPEAr driver [ 1.084468] usbcore: registered new interface driver usb-storage [ 1.095478] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100556] ci_hdrc ci_hdrc.0: no supported roles [ 1.105388] 2184200.usb supply vbus not found, using dummy regulator [ 1.115484] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120571] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125491] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.137787] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.143984] hub 1-0:1.0: USB hub found [ 1.147808] hub 1-0:1.0: 1 port detected [ 1.152509] mousedev: PS/2 mouse device common for all mice [ 1.160615] i2c /dev entries driver [ 1.165256] usbcore: registered new interface driver uvcvideo [ 1.171034] USB Video Class driver (1.1.1) [ 1.175156] gspca_main: v2.14.0 registered [ 1.181831] sdhci: Secure Digital Host Controller Interface driver [ 1.188037] sdhci: Copyright(c) Pierre Ossman [ 1.193240] Synopsys Designware Multimedia Card Interface Driver [ 1.200155] usbcore: registered new interface driver usbhid [ 1.205753] usbhid: USB HID core driver [ 1.214105] TCP: cubic registered [ 1.217443] NET: Registered protocol family 17 [ 1.221938] can: controller area network core (rev 20120528 abi 9) [ 1.228198] NET: Registered protocol family 29 [ 1.232658] can: raw protocol (rev 20120528) [ 1.236959] can: broadcast manager protocol (rev 20120528 t) [ 1.242646] can: netlink gateway (rev 20130117) max_hops=1 [ 1.248542] Key type dns_resolver registered [ 1.253310] ThumbEE CPU extension supported. [ 1.257611] Registering SWP/SWPB emulation handler [ 1.263594] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.278813] ALSA device list: [ 1.281795] No soundcards found. [ 1.285787] Waiting for root device /dev/mmcblk0p2... [ 60.323390] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout