Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2-283-gccf55f7/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.82 beaver arm-multi_v7_defconfig : FAILED 1:56.06 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:55.83 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.71 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.38 omap5uevm arm-multi_lpae_defconfig : FAILED 2:21.56 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:09.14 pi arm-multi_lpae_defconfig : FAILED 1:53.54 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:14.31 arndale arm-exynos_defconfig : passed 1:32.65 arndale arm-multi_v7_defconfig : passed 1:32.76 arndale arm-multi_lpae_defconfig : passed 1:27.51 bbb arm-omap2plus_defconfig : passed 1:39.30 bbb arm-multi_v7_defconfig : passed 1:21.67 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:50.54 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:56.79 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:55.83 capri arm-bcm_defconfig : passed 0:53.69 capri arm-multi_v7_defconfig : passed 0:55.64 chitra powerpc-pasemi_defconfig : passed 1:57.84 chitra powerpc-ppc64_defconfig : passed 2:00.62 colombus arm-sunxi_defconfig : passed 2:25.30 colombus arm-multi_v7_defconfig : passed 2:31.10 colombus arm-multi_lpae_defconfig : passed 2:36.39 cosmic arm-imx_v6_v7_defconfig : passed 3:24.26 cosmic arm-multi_v7_defconfig : passed 3:02.54 cubie arm-sunxi_defconfig : passed 0:56.05 cubie arm-multi_v7_defconfig : passed 0:55.86 cubie2 arm-sunxi_defconfig : passed 0:51.51 cubie2 arm-multi_v7_defconfig : passed 0:52.56 cubie2 arm-multi_lpae_defconfig : passed 0:51.50 cubox arm-multi_v7_defconfig : passed 1:31.08 cubox arm-mvebu_v7_defconfig : passed 1:08.96 dalmore arm-tegra_defconfig : warnings 1:27.88 dalmore arm-multi_v7_defconfig : warnings 1:31.36 dalmore arm-multi_lpae_defconfig : warnings 1:34.19 jetsontk1 arm-tegra_defconfig : warnings 0:54.32 jetsontk1 arm-multi_v7_defconfig : warnings 0:49.38 jetsontk1 arm-multi_lpae_defconfig : warnings 0:53.51 pandaes arm-omap2plus_defconfig : warnings 1:31.76 pandaes arm-multi_v7_defconfig : passed 1:40.32 parallella arm-multi_v7_defconfig : passed 2:36.54 pi arm-exynos_defconfig : passed 2:09.97 pit arm-exynos_defconfig : passed 2:12.15 pit arm-multi_v7_defconfig : passed 2:29.84 pit arm-multi_lpae_defconfig : passed 2:13.28 seaboard arm-tegra_defconfig : warnings 1:01.14 seaboard arm-multi_v7_defconfig : warnings 1:05.51 seattle arm64-defconfig : passed 2:21.06 snow arm-exynos_defconfig : passed 2:12.69 snow arm-multi_v7_defconfig : passed 2:00.42 snow arm-multi_lpae_defconfig : passed 2:01.52 snowball arm-u8500_defconfig : passed 1:30.54 snowball arm-multi_v7_defconfig : passed 1:36.02 trimslice arm-tegra_defconfig : warnings 1:40.09 trimslice arm-multi_v7_defconfig : warnings 1:55.46 wandboard arm-imx_v6_v7_defconfig : passed 1:11.66 wandboard arm-multi_v7_defconfig : passed 1:14.53
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.78 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:23.88 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:20.31 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.20 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.76 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.34 sama5 arm-sama5_defconfig : OFFLINE 2:21.76 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:16.31 socfpga arm-socfpga_defconfig : OFFLINE 2:17.73 socfpga arm-multi_v7_defconfig : OFFLINE 2:18.16
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.408056] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.415012] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421532] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428476] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434058] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.440769] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.450770] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462271] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.468891] [drm] No driver support for vblank timestamp query. [ 3.474827] drm drm: No connectors reported connected with modes [ 3.480835] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.506508] Console: switching to colour frame buffer device 128x48 [ 3.518659] drm drm: fb0: frame buffer device [ 3.533339] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.544147] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.550612] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.556021] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.563857] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.578348] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.585113] hub 1-0:1.0: USB hub found [ 3.588886] hub 1-0:1.0: 1 port detected [ 3.593832] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.599240] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.606969] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.618343] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.625000] hub 2-0:1.0: USB hub found [ 3.628776] hub 2-0:1.0: 1 port detected [ 3.637052] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.650743] vdd_sata,avdd_plle: disabling [ 3.655145] usb1_vbus: disabling [ 3.659215] Waiting for root device /dev/mmcblk0p1... [ 3.938349] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.876947] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:54]: got exception: timeout ~$off
[PYBOOT] [beaver 01:55]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.374198] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.381244] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.386846] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.394337] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.404335] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.417265] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.423883] [drm] No driver support for vblank timestamp query. [ 6.429889] drm drm: No connectors reported connected with modes [ 6.435898] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.462908] Console: switching to colour frame buffer device 128x48 [ 6.474715] drm drm: fb0: frame buffer device [ 6.501078] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.510373] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.516848] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.522282] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.530252] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.551081] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.558970] hub 1-0:1.0: USB hub found [ 6.562751] hub 1-0:1.0: 1 port detected [ 6.567561] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.572984] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.580870] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.601075] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.608859] hub 2-0:1.0: USB hub found [ 6.612635] hub 2-0:1.0: 1 port detected [ 6.622241] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.640395] vdd_sata,avdd_plle: disabling [ 6.645118] usb1_vbus: disabling [ 6.648527] ALSA device list: [ 6.651538] #0: NVIDIA Tegra Beaver [ 6.655748] Waiting for root device /dev/mmcblk0p1... [ 6.931081] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.931280] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.786064] NET: Registered protocol family 10 [ 1.791704] sit: IPv6 over IPv4 tunneling driver [ 1.792170] NET: Registered protocol family 17 [ 1.795107] NET: Registered protocol family 15 [ 1.799582] Key type dns_resolver registered [ 1.803930] Registering SWP/SWPB emulation handler [ 1.816883] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.819185] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.826598] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.833767] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.840340] [drm] No driver support for vblank timestamp query. [ 1.846241] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.852589] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.857793] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.865251] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.873702] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.883500] mmc1: new DDR MMC card at address 0001 [ 1.887061] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889335] max98090 1-0010: use default 2.8v micbias [ 1.901320] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.903550] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.903796] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.909056] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.909302] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.920320] mmcblk1: p1 p2 [ 1.932134] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.968802] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.988508] VDD10_HDMI_1.0V: disabling [ 1.989225] vdd_g3d: disabling [ 1.990289] BUCK8_2.8V: disabling [ 1.994330] ALSA device list: [ 1.995896] #0: Odroid-U3 [ 1.999696] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:54]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:55]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.942507] mmc0: new high speed MMC card at address 0001 [ 1.948526] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953413] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.959757] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.965980] smps9: Bringing 0uV into 2100000-2100000uV [ 1.974233] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.980751] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.988776] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.999871] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006351] smsc95xx v1.0.4 [ 2.010964] ldo9: bypassed regulator has no supply! [ 2.016086] ldo9: failed to get the current voltage(-517) [ 2.021751] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.037052] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.057849] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fe:8d:c0:58:da:d2 [ 2.070409] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.076856] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107120] smps9: Bringing 0uV into 2100000-2100000uV [ 2.125821] ldo9: bypassed regulator has no supply! [ 2.130938] ldo9: failed to get the current voltage(-517) [ 2.136601] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151140] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:07:12 UTC (946688832) [ 2.167069] pbias_mmc_omap5: disabling [ 2.171012] vmmcsdio_fixed: disabling [ 2.175573] Waiting for root device /dev/mmcblk1p2... [ 2.313481] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.449283] hub 1-2:1.0: USB hub found [ 2.453290] hub 1-2:1.0: 3 ports detected [ 2.459166] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.487273] smps9: Bringing 0uV into 2100000-2100000uV [ 2.506014] ldo9: bypassed regulator has no supply! [ 2.511145] ldo9: failed to get the current voltage(-517) [ 2.516810] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:19]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:20]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.901395] palmas 0-0048: Irq flag is 0x00000000 [ 1.921434] smsc95xx v1.0.4 [ 1.931214] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.941914] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.957287] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.967561] smps9: Bringing 0uV into 2100000-2100000uV [ 1.973116] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 3a:4d:a6:52:9b:ad [ 1.987358] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.993899] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.001924] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.013000] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.021197] ldo9: bypassed regulator has no supply! [ 2.026317] ldo9: failed to get the current voltage(-517) [ 2.031980] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.047135] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.074355] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.080740] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107430] smps9: Bringing 0uV into 2100000-2100000uV [ 2.126390] ldo9: bypassed regulator has no supply! [ 2.131513] ldo9: failed to get the current voltage(-517) [ 2.137179] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151716] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 01:04:33 UTC (946688673) [ 2.167614] pbias_mmc_omap5: disabling [ 2.171555] vmmcsdio_fixed: disabling [ 2.176092] Waiting for root device /dev/mmcblk1p2... [ 2.213591] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.349393] hub 1-2:1.0: USB hub found [ 2.353408] hub 1-2:1.0: 3 ports detected [ 2.359349] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.387389] smps9: Bringing 0uV into 2100000-2100000uV [ 2.406343] ldo9: bypassed regulator has no supply! [ 2.411462] ldo9: failed to get the current voltage(-517) [ 2.417129] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.897694] ldo9: bypassed regulator has no supply! [ 3.902820] ldo9: failed to get the current voltage(-517) [ 3.908482] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.931418] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.938930] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.945502] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.951808] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 3.958649] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 3.968243] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 3.977738] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 3.984797] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 3.990928] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 3.997216] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.004075] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.013670] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.023164] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.030206] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.070003] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.076295] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.083159] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.092734] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.102218] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.109254] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.129932] smps9: Bringing 0uV into 2100000-2100000uV [ 4.158380] ldo9: bypassed regulator has no supply! [ 4.163514] ldo9: failed to get the current voltage(-517) [ 4.169189] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.189297] hctosys: unable to open rtc device (rtc0) [ 4.194592] sr_init: No PMIC hook to init smartreflex [ 4.200096] sr_init: platform driver register failed for SR [ 4.227560] pbias_mmc_omap5: disabling [ 4.231521] vmmcsdio_fixed: disabling [ 4.237617] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.538849] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545201] isl29018 7-0044: Failed to read 1: -6 [ 1.549784] isl29018 7-0044: regmap initialization fails: -6 [ 1.560730] NET: Registered protocol family 10 [ 1.565163] sit: IPv6 over IPv4 tunneling driver [ 1.568739] NET: Registered protocol family 17 [ 1.572744] can: controller area network core (rev 20120528 abi 9) [ 1.578935] NET: Registered protocol family 29 [ 1.583322] can: raw protocol (rev 20120528) [ 1.587571] can: broadcast manager protocol (rev 20120528 t) [ 1.593214] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598938] Key type dns_resolver registered [ 1.603262] ThumbEE CPU extension supported. [ 1.607182] Registering SWP/SWPB emulation handler [ 1.617124] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622604] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628971] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634345] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644452] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654819] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660263] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670450] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676630] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682007] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691736] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714458] Waiting for root device /dev/mmcblk0p1... [ 1.718341] mmc0: tuning execution failed: -5 [ 1.722395] mmc0: error -5 whilst initialising MMC card [ 2.583625] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597825] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603285] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609656] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615041] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:51]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.533358] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539709] isl29018 7-0044: Failed to read 1: -6 [ 1.544295] isl29018 7-0044: regmap initialization fails: -6 [ 1.555187] NET: Registered protocol family 10 [ 1.559620] sit: IPv6 over IPv4 tunneling driver [ 1.563196] NET: Registered protocol family 17 [ 1.567202] can: controller area network core (rev 20120528 abi 9) [ 1.573393] NET: Registered protocol family 29 [ 1.577780] can: raw protocol (rev 20120528) [ 1.582029] can: broadcast manager protocol (rev 20120528 t) [ 1.587671] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593396] Key type dns_resolver registered [ 1.597721] ThumbEE CPU extension supported. [ 1.601640] Registering SWP/SWPB emulation handler [ 1.611549] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617027] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623394] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628769] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638868] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649200] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654646] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664829] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671009] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676388] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686125] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708692] Waiting for root device /dev/mmcblk0p1... [ 1.712571] mmc0: tuning execution failed: -5 [ 1.716627] mmc0: error -5 whilst initialising MMC card [ 2.583149] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597269] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602732] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609104] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614486] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:07]: got exception: timeout ~$off
[PYBOOT] [pi 02:08]: Done.
kernel-build-reports@lists.linaro.org