Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160419/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 11:55.85 bbb arm-omap2plus_defconfig : FAILED 1:54.49 bbb arm-multi_v7_defconfig : FAILED 0:39.61 bbb arm-multi_v7_nosmp_defconfig : FAILED 0:49.52 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.26 beagleboard-x15 arm-multi_v7_defconfig : FAILED 0:24.66 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 0:24.56 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 0:51.36 beaver arm-tegra_defconfig : FAILED 1:46.30 beaver arm-multi_v7_defconfig : FAILED 1:55.46 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:50.37 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:21.41 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.65 cosmic arm-multi_v7_defconfig : FAILED 2:17.09 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:00.99 dalmore arm-multi_lpae_defconfig : FAILED 2:11.34 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:54.54 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:51.49 snow arm-multi_v7_nosmp_defconfig : FAILED 14:35.54 snowball arm-multi_v7_defconfig : FAILED 2:15.30 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:58.94
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:14.90 arndale arm-exynos_defconfig : passed 1:29.31 arndale arm-multi_v7_defconfig : warnings 1:28.62 arndale arm-multi_lpae_defconfig : warnings 1:32.75 capri arm-bcm_defconfig : passed 0:54.89 capri arm-multi_v7_defconfig : warnings 0:54.31 capri arm-multi_v7_nosmp_defconfig : warnings 0:49.72 chitra powerpc-pasemi_defconfig : passed 1:54.92 chitra powerpc-ppc64_defconfig : passed 1:59.17 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:39.85 colibri-vf61 arm-multi_v7_defconfig : warnings 1:41.46 colibri-vf61 arm-multi_v7_nosmp_defconfig : warnings 1:32.41 colombus arm-sunxi_defconfig : passed 2:37.56 colombus arm-multi_v7_defconfig : warnings 2:36.06 colombus arm-multi_lpae_defconfig : warnings 2:26.12 cubie arm-sunxi_defconfig : passed 0:58.03 cubie arm-multi_v7_defconfig : warnings 0:59.23 cubie arm-multi_v7_nosmp_defconfig : warnings 0:52.95 cubie2 arm-sunxi_defconfig : passed 0:49.64 cubie2 arm-multi_v7_defconfig : warnings 1:01.01 cubie2 arm-multi_lpae_defconfig : warnings 0:52.81 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:03.74 cubox arm-multi_v7_defconfig : warnings 1:23.08 cubox arm-mvebu_v7_defconfig : passed 0:57.54 cubox arm-multi_v7_nosmp_defconfig : warnings 1:02.60 hummingboard arm-imx_v6_v7_defconfig : passed 1:35.34 hummingboard arm-multi_v7_defconfig : warnings 1:19.14 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:16.04 jetsontk1 arm-tegra_defconfig : warnings 1:34.39 jetsontk1 arm-multi_v7_defconfig : warnings 1:35.71 jetsontk1 arm-multi_lpae_defconfig : warnings 1:47.63 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:35.97 pandaes arm-omap2plus_defconfig : warnings 1:43.26 pandaes arm-multi_v7_defconfig : passed 1:43.10 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:48.81 pi arm-exynos_defconfig : passed 2:13.15 pi arm-multi_v7_defconfig : warnings 2:30.54 pi arm-multi_lpae_defconfig : warnings 2:16.63 pi arm-multi_v7_nosmp_defconfig : warnings 2:10.95 pit arm-exynos_defconfig : passed 2:13.63 pit arm-multi_v7_defconfig : warnings 2:19.47 pit arm-multi_lpae_defconfig : warnings 2:16.26 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.02 seattle arm64-defconfig : warnings 2:23.21 snow arm-exynos_defconfig : passed 2:10.10 snow arm-multi_v7_defconfig : warnings 2:00.40 snow arm-multi_lpae_defconfig : warnings 2:00.72 socfpga arm-socfpga_defconfig : warnings 1:38.82 socfpga arm-multi_v7_defconfig : warnings 1:37.68 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:21.17 trimslice arm-tegra_defconfig : warnings 1:31.90 trimslice arm-multi_v7_defconfig : warnings 1:40.88 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:41.05 wandboard arm-imx_v6_v7_defconfig : passed 1:12.78 wandboard arm-multi_v7_defconfig : warnings 1:23.30 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:27.57
Offline boards:
dalmore arm-tegra_defconfig : OFFLINE 0:53.54 dalmore arm-multi_v7_defconfig : OFFLINE 1:55.27 omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.93 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:17.53 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:27.00 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:38.96 parallella arm-multi_v7_defconfig : OFFLINE 2:28.24 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:20.20 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:54.32 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:57.89 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:48.62 sama5 arm-sama5_defconfig : OFFLINE 2:23.99 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:33.73 seaboard arm-tegra_defconfig : OFFLINE 2:25.63 seaboard arm-multi_v7_defconfig : OFFLINE 2:25.70 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.35 snowball arm-u8500_defconfig : OFFLINE 2:16.83
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.607077] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.616551] msm_serial: driver initialized [ 1.619944] STMicroelectronics ASC driver initialized [ 1.625930] [drm] Initialized drm 1.1.0 20060810 [ 1.634879] loop: module loaded [ 1.637510] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 1.646022] libphy: Fixed MDIO Bus: probed [ 1.649028] CAN device driver interface [ 1.653354] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.659404] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.666652] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.672607] usbcore: registered new interface driver pegasus [ 1.678245] usbcore: registered new interface driver asix [ 1.683618] usbcore: registered new interface driver ax88179_178a [ 1.689695] usbcore: registered new interface driver cdc_ether [ 1.695520] usbcore: registered new interface driver smsc75xx [ 1.701253] usbcore: registered new interface driver smsc95xx [ 1.706967] usbcore: registered new interface driver net1080 [ 1.712610] usbcore: registered new interface driver cdc_subset [ 1.718510] usbcore: registered new interface driver zaurus [ 1.724086] usbcore: registered new interface driver cdc_ncm [ 1.730348] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.737008] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.744134] exynos-dwc3 usb_dwc3: no suspend clk specified [ 1.749575] usb_dwc3 supply vdd33 not found, using dummy regulator [ 1.755747] usb_dwc3 supply vdd10 not found, using dummy regulator [ 1.764357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.769409] ehci-pci: EHCI PCI platform driver [ 1.773858] ehci-platform: EHCI generic platform driver [ 1.779188] ehci-omap: OMAP-EHCI Host Controller driver [ 1.784332] ehci-orion: EHCI orion driver [ 1.788316] SPEAr-ehci: EHCI SPEAr driver [ 1.792322] ehci-st: EHCI STMicroelectronics driver [ 1.797185] ehci-exynos: EHCI EXYNOS driver [ 1.801442] ehci-atmel: EHCI Atmel driver [ 1.805340] tegra-ehci [PYBOOT] [arndale 11:51]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [arndale 11:52]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.453503] Stack: (0xdb057dd0 to 0xdb058000) [ 1.458079] 7dc0: 00000001 c0a07118 db0efa10 db0efa10 [ 1.466669] 7de0: 00000000 db37ccc0 c13b2474 db37caa8 c144fc50 db0efa10 00000000 00000000 [ 1.475258] 7e00: e083cd00 00000000 00000000 00000000 00000000 e083c800 e083ca00 00000000 [ 1.483845] 7e20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 4a102000 [ 1.492434] 7e40: 00000000 00000000 00000000 00000000 db0f08c0 db0efa10 db0efa10 c13b2488 [ 1.501023] 7e60: fffffdfb 00000000 00000000 00000000 00000000 c07826f0 c07826a4 db0efa10 [ 1.509609] 7e80: c144cf3c c144cf44 c13b2488 c0780e10 00000000 db0efa10 c13b2488 db0efa44 [ 1.518199] 7ea0: c13a3768 c140d000 0000011e c0780f68 00000000 c13b2488 c0780ebc c077f16c [ 1.526788] 7ec0: db01f85c db0d7e34 c13b2488 db4a3400 00000000 c0780408 c0f88554 c11a5834 [ 1.535377] 7ee0: c13b2488 c13b2488 c1140760 c11a5834 c140d000 c07817a4 c13b2474 c120bec0 [ 1.543966] 7f00: c1140760 c0301ea0 c0c07518 00000011 00000000 0000d000 cccccc00 c0466054 [ 1.552555] 7f20: 00000000 c1336dc0 00000591 c102dd80 c0c1cbdc c035c468 cccccccd 00000000 [ 1.561144] 7f40: c0f9c770 00000000 00000006 00000006 c1336da8 00000000 c120bec0 00000006 [ 1.569733] 7f60: c11a5834 c140d000 c140d000 0000011e c11a583c c1100db4 00000006 00000006 [ 1.578321] 7f80: 00000000 c11005a4 00000000 c0b6ef94 00000000 00000000 00000000 00000000 [ 1.586909] 7fa0: 00000000 c0b6ef9c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 1.595496] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.604084] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 793d25f2 31fc6d5a [ 1.612701] [<c08b99b4>] (cpsw_probe) from [<c07826f0>] (platform_drv_probe+0x4c/0xb0) [ 1.621023] [<c07826f0>] (platform_drv_probe) from [<c0780e10>] (driver_probe_device+0x214/0x2c0) [ 1.630341] [<c0780e10>] (driver_probe_device) from [<c0780f68>] (__driver_attach+0xac/0xb0) [ 1.639213] [<c0780f68>] (__driver_attach) from [<c077f16c>] (bus_for_each_dev+0x6c/0xa0) [ 1.647803] [<c077f16c>] (bus_for_each_dev) from [<c0780408>] (bus_add_driver+0x1a0/0x218) [ 1.656481] [<c0780408>] (bus_add_driver) from [<c07817a4>] (driver_register+0x78/0xf8) [ 1.664893] [<c07817a4>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 1.673496] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 1.682648] [<c1100db4>] (kernel_init_freeable) from [<c0b6ef9c>] (kernel_init+0x8/0x114) [ 1.691245] [<c0b6ef9c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 1.699198] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.705732] ---[ end trace 856b0b0293efb8a6 ]--- [ 1.710664] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.710664] [ 1.720264] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.720264]
[PYBOOT] [bbb 00:37]: got exception: panic ~$off
[PYBOOT] [bbb 00:39]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.223616] Stack: (0xdb057dd0 to 0xdb058000) [ 1.228190] 7dc0: 00000001 00000000 a0000013 db0dda10 [ 1.236776] 7de0: 00000000 c10a5e64 db351a80 c113ae14 db351c80 db0dda10 0000a1ff 00000000 [ 1.245361] 7e00: e0832d00 00000000 00000000 00000000 00000000 e0832800 e0832a00 00000000 [ 1.253947] 7e20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 4a102000 [ 1.262533] 7e40: 00000000 00000000 00000000 00000000 db0e0000 db0dda10 db0dda10 c10a5e78 [ 1.271119] 7e60: fffffdfb 00000000 00000000 00000000 00000000 c0700cc8 c0700c7c db0dda10 [ 1.279706] 7e80: c11382e0 c11382e8 c10a5e78 c06ff430 00000000 db0dda10 c10a5e78 db0dda44 [ 1.288292] 7ea0: c1097e68 c10fe000 000000fc c06ff588 00000000 c10a5e78 c06ff4dc c06fd8cc [ 1.296879] 7ec0: db03410c db0cec30 c10a5e78 db40b400 00000000 c06fea28 c0decac0 c0f8a830 [ 1.305466] 7ee0: c10a5e78 c10a5e78 c0f38898 c0f8a830 c10fe000 c06ffd84 c10a5e64 c0fed9ac [ 1.314052] 7f00: c0f38898 c0301c48 000000fc dfdff4d5 dfdff4c8 dfdff4c0 dfdff400 db057f38 [ 1.322639] 7f20: c034cce4 c034cafc 000004e7 c0e88ee0 c0b1bd9c c034cce4 00000000 00000000 [ 1.331224] 7f40: c0dfd8e0 00000000 00000006 00000006 00000000 00000000 c0fed9ac 00000006 [ 1.339810] 7f60: c0f8a830 c10fe000 c10fe000 000000fc c0f8a838 c0f00d84 00000006 00000006 [ 1.348394] 7f80: 00000000 c0f005a4 00000000 c0a91894 00000000 00000000 00000000 00000000 [ 1.356979] 7fa0: 00000000 c0a9189c 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 1.365565] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.374150] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 793f25f2 31fd6d5a [ 1.382767] [<c0813910>] (cpsw_probe) from [<c0700cc8>] (platform_drv_probe+0x4c/0xb0) [ 1.391086] [<c0700cc8>] (platform_drv_probe) from [<c06ff430>] (driver_probe_device+0x214/0x2c0) [ 1.400405] [<c06ff430>] (driver_probe_device) from [<c06ff588>] (__driver_attach+0xac/0xb0) [ 1.409266] [<c06ff588>] (__driver_attach) from [<c06fd8cc>] (bus_for_each_dev+0x6c/0xa0) [ 1.417854] [<c06fd8cc>] (bus_for_each_dev) from [<c06fea28>] (bus_add_driver+0x1a0/0x218) [ 1.426532] [<c06fea28>] (bus_add_driver) from [<c06ffd84>] (driver_register+0x78/0xf8) [ 1.434940] [<c06ffd84>] (driver_register) from [<c0301c48>] (do_one_initcall+0x40/0x170) [ 1.443538] [<c0301c48>] (do_one_initcall) from [<c0f00d84>] (kernel_init_freeable+0x138/0x1d8) [ 1.452679] [<c0f00d84>] (kernel_init_freeable) from [<c0a9189c>] (kernel_init+0x8/0x110) [ 1.461274] [<c0a9189c>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 1.469224] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.475693] ---[ end trace 3c35ed2d39f3c89a ]--- [ 1.480591] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.480591] [ 1.490179] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.490179]
[PYBOOT] [bbb 00:46]: got exception: panic ~$off
[PYBOOT] [bbb 00:47]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.091153] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.097285] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.103621] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.110508] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.120118] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.129633] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.136661] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.178420] ledtrig-cpu: registered to indicate activity on CPUs [ 2.187192] oprofile: using arm/armv7 [ 2.192207] Initializing XFRM netlink socket [ 2.197351] NET: Registered protocol family 10 [ 2.208485] sit: IPv6 over IPv4 tunneling driver [ 2.217512] NET: Registered protocol family 17 [ 2.222465] NET: Registered protocol family 15 [ 2.227845] Key type dns_resolver registered [ 2.232675] omap_voltage_late_init: Voltage driver support not added [ 2.239433] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.247987] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.258456] ThumbEE CPU extension supported. [ 2.262987] Registering SWP/SWPB emulation handler [ 2.268090] SmartReflex Class3 initialized [ 2.340404] mmc1: new high speed MMC card at address 0001 [ 2.354378] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.365008] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.378669] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.385974] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.393778] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.408690] mmcblk1: p1 p2 [ 2.416936] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.434866] hctosys: unable to open rtc device (rtc0) [ 2.440386] sr_init: No PMIC hook to init smartreflex [ 2.446085] sr_init: platform driver register failed for SR [ 2.492716] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.008070] dfa0: 00000000 c0b6ef9c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 2.016609] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.025146] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 2.033692] [<c08b99b4>] (cpsw_probe) from [<c07826f0>] (platform_drv_probe+0x4c/0xb0) [ 2.041971] [<c07826f0>] (platform_drv_probe) from [<c0780e10>] (driver_probe_device+0x214/0x2c0) [ 2.051239] [<c0780e10>] (driver_probe_device) from [<c0780f68>] (__driver_attach+0xac/0xb0) [ 2.060054] [<c0780f68>] (__driver_attach) from [<c077f16c>] (bus_for_each_dev+0x6c/0xa0) [ 2.068595] [<c077f16c>] (bus_for_each_dev) from [<c0780408>] (bus_add_driver+0x1a0/0x218) [ 2.077227] [<c0780408>] (bus_add_driver) from [<c07817a4>] (driver_register+0x78/0xf8) [ 2.085595] [<c07817a4>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 2.094135] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 2.103221] [<c1100db4>] (kernel_init_freeable) from [<c0b6ef9c>] (kernel_init+0x8/0x114) [ 2.111761] [<c0b6ef9c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.119667] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 2.126033] ---[ end trace d4a4bf26afb84069 ]--- [ 2.130875] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.130875] [ 2.140409] CPU0: stopping [ 2.143247] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D W 4.6.0-rc4-next-20160419 #1 [ 2.152265] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.158652] [<c031046c>] (unwind_backtrace) from [<c030bb08>] (show_stack+0x10/0x14) [ 2.166763] [<c030bb08>] (show_stack) from [<c058d940>] (dump_stack+0x98/0xac) [ 2.174325] [<c058d940>] (dump_stack) from [<c030ec04>] (handle_IPI+0x16c/0x18c) [ 2.182070] [<c030ec04>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.189994] [<c03017ac>] (gic_handle_irq) from [<c030c694>] (__irq_svc+0x54/0x70) [ 2.197822] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.203112] 1f40: 00000001 00000000 00000000 c031b1c0 [ 2.211672] 1f60: c13024a4 00000000 00000000 c1210600 c1302504 c130250c c140b469 c1300000 [ 2.220240] 1f80: 2dd83000 c1301fa0 c030892c c0308930 60000013 ffffffff [ 2.227176] [<c030c694>] (__irq_svc) from [<c0308930>] (arch_cpu_idle+0x38/0x3c) [ 2.234920] [<c0308930>] (arch_cpu_idle) from [<c0378b98>] (cpu_startup_entry+0x1bc/0x220) [ 2.243578] [<c0378b98>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 2.252150] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.258990] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.258990]
[PYBOOT] [beagleboard-x15 00:22]: got exception: panic ~$off
[PYBOOT] [beagleboard-x15 00:24]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.007505] dfa0: 00000000 c0b6ef9c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 2.016053] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.024601] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 2.033158] [<c08b99b4>] (cpsw_probe) from [<c07826f0>] (platform_drv_probe+0x4c/0xb0) [ 2.041435] [<c07826f0>] (platform_drv_probe) from [<c0780e10>] (driver_probe_device+0x214/0x2c0) [ 2.050715] [<c0780e10>] (driver_probe_device) from [<c0780f68>] (__driver_attach+0xac/0xb0) [ 2.059541] [<c0780f68>] (__driver_attach) from [<c077f16c>] (bus_for_each_dev+0x6c/0xa0) [ 2.068088] [<c077f16c>] (bus_for_each_dev) from [<c0780408>] (bus_add_driver+0x1a0/0x218) [ 2.076727] [<c0780408>] (bus_add_driver) from [<c07817a4>] (driver_register+0x78/0xf8) [ 2.085100] [<c07817a4>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 2.093650] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 2.102748] [<c1100db4>] (kernel_init_freeable) from [<c0b6ef9c>] (kernel_init+0x8/0x114) [ 2.111295] [<c0b6ef9c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.119205] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 2.125579] ---[ end trace 1dc8b92467b6772c ]--- [ 2.130432] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.130432] [ 2.139969] CPU0: stopping [ 2.142800] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D W 4.6.0-rc4-next-20160419 #1 [ 2.151816] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.158206] [<c031046c>] (unwind_backtrace) from [<c030bb08>] (show_stack+0x10/0x14) [ 2.166323] [<c030bb08>] (show_stack) from [<c058d940>] (dump_stack+0x98/0xac) [ 2.173891] [<c058d940>] (dump_stack) from [<c030ec04>] (handle_IPI+0x16c/0x18c) [ 2.181634] [<c030ec04>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.189554] [<c03017ac>] (gic_handle_irq) from [<c030c694>] (__irq_svc+0x54/0x70) [ 2.197384] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.202672] 1f40: 00000001 00000000 00000000 c031b1c0 [ 2.211237] 1f60: c13024a4 00000000 00000000 c1210600 c1302504 c130250c c140b469 c1300000 [ 2.219797] 1f80: 2dd83000 c1301fa0 c030892c c0308930 60000013 ffffffff [ 2.226731] [<c030c694>] (__irq_svc) from [<c0308930>] (arch_cpu_idle+0x38/0x3c) [ 2.234476] [<c0308930>] (arch_cpu_idle) from [<c0378b98>] (cpu_startup_entry+0x1bc/0x220) [ 2.243141] [<c0378b98>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 2.251703] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.258543] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.258543]
[PYBOOT] [beagleboard-x15 00:23]: got exception: panic ~$off
[PYBOOT] [beagleboard-x15 00:24]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.742279] Stack: (0xee07fdd0 to 0xee080000) [ 1.746826] fdc0: 00000002 00000000 a0000053 ee188410 [ 1.755375] fde0: 00000000 c10a5e64 ee479280 c113ae14 ee479480 ee188410 0000a1ff 00000000 [ 1.763915] fe00: fa484d00 00000000 00000000 00000000 00000000 fa484800 fa484a00 00000000 [ 1.772457] fe20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 48486000 [ 1.780999] fe40: 00000000 00000000 00000000 00000000 ee1892d0 ee188410 ee188410 c10a5e78 [ 1.789553] fe60: fffffdfb 00000000 00000000 00000000 00000000 c0700cc8 c0700c7c ee188410 [ 1.798104] fe80: c11382e0 c11382e8 c10a5e78 c06ff430 00000000 ee188410 c10a5e78 ee188444 [ 1.806649] fea0: c1097e68 c10fe000 000000fc c06ff588 00000000 c10a5e78 c06ff4dc c06fd8cc [ 1.815195] fec0: ee05934c ee1846b0 c10a5e78 ee552f00 00000000 c06fea28 c0decac0 c0f8a830 [ 1.823741] fee0: c10a5e78 c10a5e78 c0f38898 c0f8a830 c10fe000 c06ffd84 c10a5e64 c0fed9ac [ 1.832285] ff00: c0f38898 c0301c48 ee004f00 c112371c ee055e00 c0b06924 00000000 00000000 [ 1.840831] ff20: 0000e000 c042cf44 000004e7 c0e88ee0 c0b1bd9c c034cce4 00000000 00000000 [ 1.849378] ff40: c0dfd8e0 00000000 00000006 00000006 00000000 00000000 c0fed9ac 00000006 [ 1.857929] ff60: c0f8a830 c10fe000 c10fe000 000000fc c0f8a838 c0f00d84 00000006 00000006 [ 1.866481] ff80: 00000000 c0f005a4 00000000 c0a91894 00000000 00000000 00000000 00000000 [ 1.875024] ffa0: 00000000 c0a9189c 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 1.883566] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.892118] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 1.900685] [<c0813910>] (cpsw_probe) from [<c0700cc8>] (platform_drv_probe+0x4c/0xb0) [ 1.908970] [<c0700cc8>] (platform_drv_probe) from [<c06ff430>] (driver_probe_device+0x214/0x2c0) [ 1.918251] [<c06ff430>] (driver_probe_device) from [<c06ff588>] (__driver_attach+0xac/0xb0) [ 1.927079] [<c06ff588>] (__driver_attach) from [<c06fd8cc>] (bus_for_each_dev+0x6c/0xa0) [ 1.935636] [<c06fd8cc>] (bus_for_each_dev) from [<c06fea28>] (bus_add_driver+0x1a0/0x218) [ 1.944283] [<c06fea28>] (bus_add_driver) from [<c06ffd84>] (driver_register+0x78/0xf8) [ 1.952659] [<c06ffd84>] (driver_register) from [<c0301c48>] (do_one_initcall+0x40/0x170) [ 1.961203] [<c0301c48>] (do_one_initcall) from [<c0f00d84>] (kernel_init_freeable+0x138/0x1d8) [ 1.970297] [<c0f00d84>] (kernel_init_freeable) from [<c0a9189c>] (kernel_init+0x8/0x110) [ 1.978845] [<c0a9189c>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 1.986760] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.993129] ---[ end trace cb88537fdc8fa204 ]--- [ 1.997968] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.997968] [ 2.007515] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.007515]
[PYBOOT] [beagleboard-x15 00:49]: got exception: panic ~$off
[PYBOOT] [beagleboard-x15 00:50]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.695349] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.701674] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.708558] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.718956] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.723799] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.730114] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.736961] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.746554] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.756053] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.763119] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.809353] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.815653] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.822531] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.832128] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.841633] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.848677] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.854789] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.861100] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.867938] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.877524] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.887026] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.894068] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.939611] hctosys: unable to open rtc device (rtc0) [ 2.944908] sr_init: No PMIC hook to init smartreflex [ 2.950426] sr_init: platform driver register failed for SR [ 2.991100] mmc1: new high speed MMC card at address 0001 [ 2.997625] aic_dvdd_fixed: disabling [ 2.999103] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.999841] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.000560] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.019489] ldousb: disabling [ 3.020425] mmcblk1: p1 [ 3.028204] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.550118] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.556639] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.563503] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.569090] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.576628] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.586627] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.599431] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.606054] [drm] No driver support for vblank timestamp query. [ 3.611994] drm drm: No connectors reported connected with modes [ 3.618010] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.644536] Console: switching to colour frame buffer device 128x48 [ 3.656327] drm drm: fb0: frame buffer device [ 3.673811] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.684566] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.691032] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.696442] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.704287] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.718819] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.726049] hub 1-0:1.0: USB hub found [ 3.729821] hub 1-0:1.0: 1 port detected [ 3.734742] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.740155] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.747902] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.763814] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.770970] hub 2-0:1.0: USB hub found [ 3.774737] hub 2-0:1.0: 1 port detected [ 3.783524] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.797041] vdd_sata,avdd_plle: disabling [ 3.801875] usb1_vbus: disabling [ 3.805995] Waiting for root device /dev/mmcblk0p1... [ 4.088820] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.034371] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 74.843817] random: nonblocking pool is initialized
[PYBOOT] [beaver 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:53]: got exception: timeout ~$off
[PYBOOT] [beaver 01:54]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.472448] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.479401] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.485916] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.492754] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.498338] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.504953] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.514945] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.525309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.531927] [drm] No driver support for vblank timestamp query. [ 3.537856] drm drm: No connectors reported connected with modes [ 3.543858] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.563277] Console: switching to colour frame buffer device 128x48 [ 3.575067] drm drm: fb0: frame buffer device [ 3.579504] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.589383] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.595834] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.601240] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.608965] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.622838] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.629212] hub 1-0:1.0: USB hub found [ 3.632976] hub 1-0:1.0: 1 port detected [ 3.637620] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.643028] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.650693] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.662837] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.669149] hub 2-0:1.0: USB hub found [ 3.672907] hub 2-0:1.0: 1 port detected [ 3.680391] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.693568] vdd_sata,avdd_plle: disabling [ 3.697960] usb1_vbus: disabling [ 3.701853] Waiting for root device /dev/mmcblk0p1... [ 3.982842] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.921389] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:48]: got exception: timeout ~$off
[PYBOOT] [beaver 01:49]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.714201] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.721159] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.726763] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.734293] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.744377] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.757226] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.763850] [drm] No driver support for vblank timestamp query. [ 3.769854] drm drm: No connectors reported connected with modes [ 3.775868] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.802403] Console: switching to colour frame buffer device 128x48 [ 3.814204] drm drm: fb0: frame buffer device [ 3.840784] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.850039] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.856519] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.861953] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.869922] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.890789] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.898524] hub 1-0:1.0: USB hub found [ 3.902307] hub 1-0:1.0: 1 port detected [ 3.907113] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.912540] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.920415] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.940788] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.948393] hub 2-0:1.0: USB hub found [ 3.952174] hub 2-0:1.0: 1 port detected [ 3.960479] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.979274] vdd_sata,avdd_plle: disabling [ 3.983696] usb1_vbus: disabling [ 3.987105] ALSA device list: [ 3.990062] #0: NVIDIA Tegra Beaver [ 3.994308] Waiting for root device /dev/mmcblk0p1... [ 4.270792] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.256210] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:44]: got exception: timeout ~$off
[PYBOOT] [beaver 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.941009] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.955327] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.791073] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 90.198862] eth0: device MAC address 9e:37:ff:08:1c:23 [ 90.356113] RX IPC Checksum Offload disabled [ 90.360778] No MAC Management Counters available [ 90.366573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/9e:37:ff:08:1c:23 Sending on LPF/eth0/9e:37:ff:08:1c:23 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:19]: got exception: timeout ~$off
[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.466725] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.540960] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.551360] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.625537] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.635860] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.710098] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.720425] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.794662] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.804994] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.879239] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.889570] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.963808] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.974139] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.048303] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.058630] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.132863] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.143187] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.217360] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.227678] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.301902] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.312223] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.386396] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.396718] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.470941] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.481338] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.555509] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.565834] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.640069] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.650387] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.724623] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.734951] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.809178] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.819503] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.187293] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.261269] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.271344] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.345316] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.355410] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.429392] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.439473] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.513456] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.523542] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.597575] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.607656] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.681637] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.691707] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.765686] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.775759] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.849739] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.859812] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.933790] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.943861] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.017841] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.027914] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.101890] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.111965] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.185940] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.196016] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.269989] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.280067] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.354043] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.364118] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.438099] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.448180] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.522159] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.532259] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:14]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:15]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.967826] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.041740] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.051793] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.125702] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.135756] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.209665] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.219720] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.293628] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.303685] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.377597] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.387660] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.461566] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.471624] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.545541] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.555592] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.629498] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.639558] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.713467] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.723520] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.797425] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.807476] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.881379] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.891432] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.965344] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.975397] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.049308] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.059361] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.133269] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.143325] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.217237] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.227318] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.301224] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.311283] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.921631] can: netlink gateway (rev 20130117) max_hops=1 [ 2.928612] Key type dns_resolver registered [ 2.934992] ThumbEE CPU extension supported. [ 2.939391] Registering SWP/SWPB emulation handler [ 2.954388] usb1_vbus: supplied by vdd-sys-5v0 [ 2.963393] usb2_vbus: supplied by vdd-sys-5v0 [ 2.982190] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.003921] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.010680] [drm] No driver support for vblank timestamp query. [ 3.027460] mmc1: new high speed MMC card at address 0001 [ 3.037672] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.045827] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.054852] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.064497] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.076464] mmcblk1: p1 [ 3.191328] Console: switching to colour frame buffer device 240x75 [ 3.278785] drm drm: fb0: frame buffer device [ 3.296743] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.311682] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.317264] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.326037] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.341755] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.352163] hub 1-0:1.0: USB hub found [ 3.356163] hub 1-0:1.0: 1 port detected [ 3.366210] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.380577] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.442828] dvdd_ts: disabling [ 3.445937] usb1_vbus: disabling [ 3.449327] vdd_cam_1v8_reg: disabling [ 3.456852] Waiting for root device /dev/mmcblk0p1... [ 3.666758] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.644687] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.766723] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:09]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:10]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.428600] can: raw protocol (rev 20120528) [ 2.432917] can: broadcast manager protocol (rev 20120528 t) [ 2.438635] can: netlink gateway (rev 20130117) max_hops=1 [ 2.445163] Key type dns_resolver registered [ 2.450164] ThumbEE CPU extension supported. [ 2.471222] usb1_vbus: supplied by vdd-sys-5v0 [ 2.479545] usb2_vbus: supplied by vdd-sys-5v0 [ 2.493832] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.517466] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.524137] [drm] No driver support for vblank timestamp query. [ 2.689076] Console: switching to colour frame buffer device 240x75 [ 2.776603] drm drm: fb0: frame buffer device [ 2.781211] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.791932] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.797488] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.805677] mmc1: new high speed MMC card at address 0001 [ 2.812393] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.818681] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.823704] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.829822] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.838416] hub 1-0:1.0: USB hub found [ 2.842398] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.848606] hub 1-0:1.0: 1 port detected [ 2.852915] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.862853] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.870881] mmcblk1: p1 [ 2.879005] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.919889] dvdd_ts: disabling [ 2.923042] usb1_vbus: disabling [ 2.926327] vdd_cam_1v8_reg: disabling [ 2.931662] Waiting for root device /dev/mmcblk0p1... [ 3.167283] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.121376] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.702650] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.711497] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.742696] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.743624] s5p-secss 10830000.sss: s5p-sss driver registered [ 1.748736] usbcore: registered new interface driver usbhid [ 1.754846] usbhid: USB HID core driver [ 1.763865] NET: Registered protocol family 10 [ 1.764443] sit: IPv6 over IPv4 tunneling driver [ 1.767749] NET: Registered protocol family 17 [ 1.771707] NET: Registered protocol family 15 [ 1.776179] Key type dns_resolver registered [ 1.780499] Registering SWP/SWPB emulation handler [ 1.788669] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.790898] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.823214] max98090 1-0010: MAX98090 REVID=0x43 [ 1.825470] max98090 1-0010: use default 2.8v micbias [ 1.831517] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.837258] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.838152] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.840202] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.859894] mmc1: new DDR MMC card at address 0001 [ 1.864946] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.869173] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.874757] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.883997] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.889887] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.891512] VDD10_HDMI_1.0V: disabling [ 1.892169] vdd_g3d: disabling [ 1.892811] BUCK8_2.8V: disabling [ 1.894117] ALSA device list: [ 1.894121] #0: Odroid-U3 [ 1.912221] mmcblk1: p1 p2 [ 1.916347] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:49]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:50]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.056148] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.056154] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.057145] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.057151] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.057462] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.057467] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.057769] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.057774] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.059224] P1.8V_LDO_OUT2: Bringing 1500000uV into 1800000-1800000uV [ 0.093500] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.094558] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 56, base_baud = 0) is a S3C6400/10 [ 0.094716] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 57, base_baud = 0) is a S3C6400/10 [ 0.094837] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 0.094961] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.157333] console [ttySAC3] enabled [ 1.161499] msm_serial: driver initialized [ 1.165142] STMicroelectronics ASC driver initialized [ 1.170794] [drm] Initialized drm 1.1.0 20060810 [ 1.178300] loop: module loaded [ 1.182616] libphy: Fixed MDIO Bus: probed [ 1.185483] CAN device driver interface [ 1.189662] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.195991] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.202673] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.208948] usbcore: registered new interface driver pegasus [ 1.214591] usbcore: registered new interface driver asix [ 1.219964] usbcore: registered new interface driver ax88179_178a [ 1.226039] usbcore: registered new interface driver cdc_ether [ 1.231862] usbcore: registered new interface driver smsc75xx [ 1.237595] usbcore: registered new interface driver smsc95xx [ 1.243313] usbcore: registered new interface driver net1080 [ 1.248955] usbcore: registered new interface driver cdc_subset [ 1.254859] usbcore: registered new interface driver zaurus [ 1.260426] usbcore: registered new interface driver cdc_ncm [ 1.266491] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.273325] usb_phy_generic.1.auto supply vcc not fo [PYBOOT] [snow 14:30]: got exception: maximum recursion depth exceeded ~$off
[PYBOOT] [snow 14:32]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.051513] ledtrig-cpu: registered to indicate activity on CPUs [ 2.058532] usbcore: registered new interface driver usbhid [ 2.064147] usbhid: USB HID core driver [ 2.078582] NET: Registered protocol family 10 [ 2.084747] sit: IPv6 over IPv4 tunneling driver [ 2.090576] NET: Registered protocol family 17 [ 2.095092] can: controller area network core (rev 20120528 abi 9) [ 2.101409] NET: Registered protocol family 29 [ 2.105865] can: raw protocol (rev 20120528) [ 2.110168] can: broadcast manager protocol (rev 20120528 t) [ 2.115844] can: netlink gateway (rev 20130117) max_hops=1 [ 2.122222] Key type dns_resolver registered [ 2.126831] ThumbEE CPU extension supported. [ 2.131164] Registering SWP/SWPB emulation handler [ 2.143432] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.150604] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.160156] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.167205] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.174255] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.181243] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.198364] db8500-esram12: disabling [ 2.202209] db8500-esram34: disabling [ 2.206329] V-CSI/DSI: disabling [ 2.209716] mmci-reg: disabling [ 2.214721] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.220733] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.229461] Waiting for root device /dev/mmcblk0p4... [ 2.263458] mmc3: new high speed MMC card at address 0001 [ 2.269805] mmcblk3: mmc3:0001 3.53 GiB [ 2.274200] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.279998] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.285827] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.292785] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:12]: got exception: timeout ~$off
[PYBOOT] [snowball 02:13]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.987762] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.995239] ledtrig-cpu: registered to indicate activity on CPUs [ 2.001556] usbcore: registered new interface driver usbhid [ 2.007141] usbhid: USB HID core driver [ 2.014343] NET: Registered protocol family 10 [ 2.069641] sit: IPv6 over IPv4 tunneling driver [ 2.074798] NET: Registered protocol family 17 [ 2.079254] can: controller area network core (rev 20120528 abi 9) [ 2.085479] NET: Registered protocol family 29 [ 2.089935] can: raw protocol (rev 20120528) [ 2.094207] can: broadcast manager protocol (rev 20120528 t) [ 2.099853] can: netlink gateway (rev 20130117) max_hops=1 [ 2.105773] Key type dns_resolver registered [ 2.110198] ThumbEE CPU extension supported. [ 2.165405] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.179107] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.188171] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.195159] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.202148] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.209136] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.221130] db8500-esram12: disabling [ 2.268920] db8500-esram34: disabling [ 2.288665] V-CSI/DSI: disabling [ 2.298889] mmci-reg: disabling [ 2.302429] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.308410] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.324584] Waiting for root device /dev/mmcblk0p4... [ 3.127624] mmc3: new high speed MMC card at address 0001 [ 3.139465] mmcblk3: mmc3:0001 3.53 GiB [ 3.148620] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.164154] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.169677] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.185485] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:58]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter