Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20140925/
Failed boards:
beaver arm-tegra_defconfig : BUILD FAILED colombus arm-sunxi_defconfig : FAILED 1:48.51 colombus arm-multi_v7_defconfig : FAILED 1:55.21 colombus arm-multi_lpae_defconfig : FAILED 1:54.70 dalmore arm-tegra_defconfig : BUILD FAILED jetsontk1 arm-tegra_defconfig : BUILD FAILED seaboard arm-tegra_defconfig : BUILD FAILED trimslice arm-tegra_defconfig : BUILD FAILED
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:19.89 arndale arm-exynos_defconfig : passed 1:38.34 arndale arm-multi_v7_defconfig : passed 1:21.53 arndale arm-multi_lpae_defconfig : passed 1:22.79 bbb arm-omap2plus_defconfig : passed 1:35.20 bbb arm-multi_v7_defconfig : passed 1:09.41 beaver arm-multi_v7_defconfig : passed 1:00.56 capri arm-bcm_defconfig : passed 0:42.14 capri arm-multi_v7_defconfig : passed 0:42.41 cubie arm-sunxi_defconfig : passed 1:09.52 cubie arm-multi_v7_defconfig : passed 0:58.27 cubie2 arm-sunxi_defconfig : passed 1:08.28 cubie2 arm-multi_lpae_defconfig : passed 1:02.25 cubox arm-multi_v7_defconfig : passed 1:07.93 dalmore arm-multi_v7_defconfig : passed 1:15.48 dalmore arm-multi_lpae_defconfig : passed 1:19.13 hummingboard arm-imx_v6_v7_defconfig : passed 1:23.16 hummingboard arm-multi_v7_defconfig : passed 1:08.11 jetsontk1 arm-multi_v7_defconfig : passed 0:59.24 jetsontk1 arm-multi_lpae_defconfig : passed 1:12.37 odroidu3 arm-exynos_defconfig : passed 0:52.07 omap5uevm arm-omap2plus_defconfig : warnings 1:05.61 omap5uevm arm-multi_v7_defconfig : passed 1:07.60 omap5uevm arm-multi_lpae_defconfig : passed 1:16.92 pandaes arm-omap2plus_defconfig : warnings 1:29.42 pandaes arm-multi_v7_defconfig : passed 1:53.34 pi arm-exynos_defconfig : passed 0:56.91 pi arm-multi_v7_defconfig : passed 0:50.65 pi arm-multi_lpae_defconfig : passed 0:49.24 pit arm-exynos_defconfig : passed 0:55.93 pit arm-multi_v7_defconfig : passed 0:51.24 pit arm-multi_lpae_defconfig : passed 0:50.81 sama5 arm-sama5_defconfig : passed 1:54.59 seaboard arm-multi_v7_defconfig : passed 1:25.08 snow arm-exynos_defconfig : passed 1:03.39 snow arm-multi_v7_defconfig : passed 1:02.14 snow arm-multi_lpae_defconfig : passed 0:55.84 snowball arm-u8500_defconfig : passed 2:36.49 snowball arm-multi_v7_defconfig : passed 2:11.51 trimslice arm-multi_v7_defconfig : passed 1:08.59 wandboard arm-imx_v6_v7_defconfig : passed 1:12.61 wandboard arm-multi_v7_defconfig : passed 0:53.99
Offline boards:
cubie2 arm-multi_v7_defconfig : OFFLINE 1:24.04
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.465039] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.471285] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.506868] sunxi-mmc 1c0f000.mmc: base:0xf009a000 irq:92 [ 1.512588] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.519425] usbcore: registered new interface driver usbhid [ 1.525211] usbhid: USB HID core driver [ 1.533367] TCP: cubic registered [ 1.536820] NET: Registered protocol family 17 [ 1.541470] can: controller area network core (rev 20120528 abi 9) [ 1.547957] NET: Registered protocol family 29 [ 1.552581] can: raw protocol (rev 20120528) [ 1.557020] can: broadcast manager protocol (rev 20120528 t) [ 1.562903] can: netlink gateway (rev 20130117) max_hops=1 [ 1.569038] Key type dns_resolver registered [ 1.573638] ThumbEE CPU extension supported. [ 1.578095] Registering SWP/SWPB emulation handler [ 1.584288] usb2-vbus: 5000 mV [ 1.589119] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.597208] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.603026] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.611308] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000 [ 1.625943] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.633117] hub 1-0:1.0: USB hub found [ 1.637046] hub 1-0:1.0: 1 port detected [ 1.641844] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:23 UTC (23) [ 1.653419] vcc5v0: disabling [ 1.656504] vcc3v3: disabling [ 1.659608] vcc3v0: disabling [ 1.662800] ALSA device list: [ 1.665873] No soundcards found. [ 1.670296] Waiting for root device /dev/mmcblk0p1... [ 1.957847] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 42.283347] random: nonblocking pool is initialized
[PYBOOT] [colombus 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:53]: got exception: timeout ~$off
[PYBOOT] [colombus 01:54]: Done.
========================================================================
Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.464964] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.471206] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.506878] sunxi-mmc 1c0f000.mmc: base:0xf009a000 irq:92 [ 1.512585] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.519401] usbcore: registered new interface driver usbhid [ 1.525177] usbhid: USB HID core driver [ 1.533302] TCP: cubic registered [ 1.536750] NET: Registered protocol family 17 [ 1.541393] can: controller area network core (rev 20120528 abi 9) [ 1.547867] NET: Registered protocol family 29 [ 1.552483] can: raw protocol (rev 20120528) [ 1.556917] can: broadcast manager protocol (rev 20120528 t) [ 1.562792] can: netlink gateway (rev 20130117) max_hops=1 [ 1.568929] Key type dns_resolver registered [ 1.573529] ThumbEE CPU extension supported. [ 1.577975] Registering SWP/SWPB emulation handler [ 1.584261] usb2-vbus: 5000 mV [ 1.589097] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.597193] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.603026] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.611322] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000 [ 1.625951] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.633134] hub 1-0:1.0: USB hub found [ 1.637076] hub 1-0:1.0: 1 port detected [ 1.641877] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:23 UTC (23) [ 1.653405] vcc5v0: disabling [ 1.656490] vcc3v3: disabling [ 1.659576] vcc3v0: disabling [ 1.662766] ALSA device list: [ 1.665839] No soundcards found. [ 1.670219] Waiting for root device /dev/mmcblk0p1... [ 1.957835] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 42.485585] random: nonblocking pool is initialized
[PYBOOT] [colombus 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:53]: got exception: timeout ~$off
[PYBOOT] [colombus 01:54]: Done.
========================================================================
Board colombus-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 0.328418] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.328589] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing [ 0.328612] platform 1f02c00.pinctrl: Driver sun6i-a31-r-pinctrl requests probe deferral [ 0.381237] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.384028] console [ttyS0] disabled [ 0.404932] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 32, base_baud = 1500000) is a U6_16550A [ 1.075273] console [ttyS0] enabled [ 1.081213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.087982] ehci-platform: EHCI generic platform driver [ 1.093585] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.099385] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.107565] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000 [ 1.132690] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.139815] hub 1-0:1.0: USB hub found [ 1.143751] hub 1-0:1.0: 1 port detected [ 1.148273] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.154737] ohci-platform: OHCI generic platform driver [ 1.160593] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0 [ 1.167636] sun6i-rtc 1f00000.rtc: RTC enabled [ 1.172401] i2c /dev entries driver [ 1.177528] sunxi-mmc 1c0f000.mmc: No vmmc regulator found [ 1.183213] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.189222] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.226215] sunxi-mmc 1c0f000.mmc: base:0xf00a4000 irq:92 [ 1.232600] usbcore: registered new interface driver usbhid [ 1.238380] usbhid: USB HID core driver [ 1.243329] TCP: cubic registered [ 1.246792] NET: Registered protocol family 17 [ 1.251551] Key type dns_resolver registered [ 1.256093] Registering SWP/SWPB emulation handler [ 1.263459] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.270957] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:17 UTC (17) [ 1.283361] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [colombus 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:46]: got exception: timeout ~$off
[PYBOOT] [colombus 01:48]: Done.
Hi Olof,
On Thu, Sep 25, 2014 at 02:42:05AM -0700, Olof's autobooter wrote:
Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20140925/
Failed boards:
colombus arm-sunxi_defconfig : FAILED 1:48.51 colombus arm-multi_v7_defconfig : FAILED 1:55.21 colombus arm-multi_lpae_defconfig : FAILED 1:54.70========================================================================
Board colombus-arm-multi_lpae_defconfig failure log:
[ 1.465039] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.471285] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.506868] sunxi-mmc 1c0f000.mmc: base:0xf009a000 irq:92 [ 1.512588] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.519425] usbcore: registered new interface driver usbhid [ 1.525211] usbhid: USB HID core driver [ 1.533367] TCP: cubic registered [ 1.536820] NET: Registered protocol family 17 [ 1.541470] can: controller area network core (rev 20120528 abi 9) [ 1.547957] NET: Registered protocol family 29 [ 1.552581] can: raw protocol (rev 20120528) [ 1.557020] can: broadcast manager protocol (rev 20120528 t) [ 1.562903] can: netlink gateway (rev 20130117) max_hops=1 [ 1.569038] Key type dns_resolver registered [ 1.573638] ThumbEE CPU extension supported. [ 1.578095] Registering SWP/SWPB emulation handler [ 1.584288] usb2-vbus: 5000 mV [ 1.589119] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.597208] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.603026] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.611308] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000 [ 1.625943] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.633117] hub 1-0:1.0: USB hub found [ 1.637046] hub 1-0:1.0: 1 port detected [ 1.641844] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:23 UTC (23) [ 1.653419] vcc5v0: disabling [ 1.656504] vcc3v3: disabling [ 1.659608] vcc3v0: disabling [ 1.662800] ALSA device list: [ 1.665873] No soundcards found. [ 1.670296] Waiting for root device /dev/mmcblk0p1... [ 1.957847] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 42.283347] random: nonblocking pool is initialized
I just looked at this, and I'm kind of confused.
The only thing that seems to differ is that the vcc3v0 regulator seems to not be taken by the MMC core, since it's later disabled.
However, the MMC subsystem doesn't complain that vmmc (vcc3v0) is missing, and does call regulator_get on it, and doesn't log any error regarding it.
The a31 and colombus device trees haven't changed between 3.17 and linux-next, neither was our mmc driver.
I couldn't find any change that might be related to that in the regulator or mmc cores... and I'm away from this board.
Could you try to bisect it?
Thanks, Maxime
Hi Olof,
For some reason, the mail was addressed to your build bot, which probably explains why you didn't answer.
On Thu, Sep 25, 2014 at 02:37:46PM +0200, Maxime Ripard wrote:
Hi Olof,
On Thu, Sep 25, 2014 at 02:42:05AM -0700, Olof's autobooter wrote:
Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20140925/
Failed boards:
colombus arm-sunxi_defconfig : FAILED 1:48.51 colombus arm-multi_v7_defconfig : FAILED 1:55.21 colombus arm-multi_lpae_defconfig : FAILED 1:54.70========================================================================
Board colombus-arm-multi_lpae_defconfig failure log:
[ 1.465039] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.471285] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.506868] sunxi-mmc 1c0f000.mmc: base:0xf009a000 irq:92 [ 1.512588] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.519425] usbcore: registered new interface driver usbhid [ 1.525211] usbhid: USB HID core driver [ 1.533367] TCP: cubic registered [ 1.536820] NET: Registered protocol family 17 [ 1.541470] can: controller area network core (rev 20120528 abi 9) [ 1.547957] NET: Registered protocol family 29 [ 1.552581] can: raw protocol (rev 20120528) [ 1.557020] can: broadcast manager protocol (rev 20120528 t) [ 1.562903] can: netlink gateway (rev 20130117) max_hops=1 [ 1.569038] Key type dns_resolver registered [ 1.573638] ThumbEE CPU extension supported. [ 1.578095] Registering SWP/SWPB emulation handler [ 1.584288] usb2-vbus: 5000 mV [ 1.589119] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.597208] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.603026] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.611308] ehci-platform 1c1b000.usb: irq 106, io mem 0x01c1b000 [ 1.625943] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.633117] hub 1-0:1.0: USB hub found [ 1.637046] hub 1-0:1.0: 1 port detected [ 1.641844] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:23 UTC (23) [ 1.653419] vcc5v0: disabling [ 1.656504] vcc3v3: disabling [ 1.659608] vcc3v0: disabling [ 1.662800] ALSA device list: [ 1.665873] No soundcards found. [ 1.670296] Waiting for root device /dev/mmcblk0p1... [ 1.957847] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 42.283347] random: nonblocking pool is initialized
I just looked at this, and I'm kind of confused.
The only thing that seems to differ is that the vcc3v0 regulator seems to not be taken by the MMC core, since it's later disabled.
However, the MMC subsystem doesn't complain that vmmc (vcc3v0) is missing, and does call regulator_get on it, and doesn't log any error regarding it.
The a31 and colombus device trees haven't changed between 3.17 and linux-next, neither was our mmc driver.
I couldn't find any change that might be related to that in the regulator or mmc cores... and I'm away from this board.
Could you try to bisect it?
Plus, your arm-soc tests on this board are actually passing, so it must be something that came from another subsystem.
Thanks! Maxime
kernel-build-reports@lists.linaro.org
-
Maxime Ripard -
Olof's autobooter