Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.4.32-39-g194fe3a/
Failed boards:
bbb arm-omap2plus_defconfig : FAILED 1:56.80 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.33 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:47.89 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 2:11.95 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 3:50.14 beaver arm-tegra_defconfig : FAILED 1:45.42 beaver arm-multi_v7_defconfig : FAILED 2:01.12 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:43.25 jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 2:16.41 seaboard arm-tegra_defconfig : FAILED 2:05.28 seaboard arm-multi_v7_nosmp_defconfig : FAILED 3:52.37 snowball arm-u8500_defconfig : FAILED 2:08.39 snowball arm-multi_v7_defconfig : FAILED 3:19.28 snowball arm-multi_v7_nosmp_defconfig : FAILED 3:17.35
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:18.32 arndale arm-exynos_defconfig : warnings 1:32.16 arndale arm-multi_v7_defconfig : passed 1:31.25 capri arm-multi_v7_defconfig : passed 1:01.69 capri arm-multi_v7_nosmp_defconfig : warnings 2:46.05 chitra powerpc-ppc64_defconfig : passed 4:09.76 colombus arm-sunxi_defconfig : passed 2:12.30 cosmic arm-imx_v6_v7_defconfig : passed 3:20.16 cosmic arm-multi_v7_defconfig : passed 3:06.50 cosmic arm-multi_v7_nosmp_defconfig : passed 4:01.64 cubie arm-sunxi_defconfig : passed 1:01.59 cubie arm-multi_v7_defconfig : passed 1:04.51 cubie2 arm-sunxi_defconfig : passed 0:54.25 cubie2 arm-multi_v7_defconfig : passed 1:12.11 cubie2 arm-multi_v7_nosmp_defconfig : warnings 2:02.34 cubox arm-multi_v7_defconfig : passed 1:06.79 cubox arm-multi_v7_nosmp_defconfig : passed 1:39.83 jetsontk1 arm-tegra_defconfig : passed 1:42.20 jetsontk1 arm-multi_v7_defconfig : passed 2:00.55 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.16 omap5uevm arm-omap2plus_defconfig : passed 1:05.76 omap5uevm arm-multi_v7_defconfig : passed 1:13.59 omap5uevm arm-multi_lpae_defconfig : passed 1:36.40 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 3:15.57 pandaes arm-omap2plus_defconfig : passed 1:46.61 pandaes arm-multi_v7_defconfig : passed 1:49.07 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:46.24 parallella arm-multi_v7_defconfig : passed 3:23.49 parallella arm-multi_v7_nosmp_defconfig : warnings 4:25.55 pi arm-exynos_defconfig : passed 1:30.56 pi arm-multi_v7_defconfig : passed 1:43.87 pi arm-multi_lpae_defconfig : passed 2:22.41 pi arm-multi_v7_nosmp_defconfig : warnings 3:31.17 pit arm-exynos_defconfig : passed 1:31.59 pit arm-multi_v7_defconfig : passed 2:09.85 seattle arm64-nosmp_defconfig : passed 3:47.49 trimslice arm-multi_v7_defconfig : passed 2:45.79 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:39.53 wandboard arm-imx_v6_v7_defconfig : passed 1:12.94 wandboard arm-multi_v7_defconfig : passed 1:32.75
Offline boards:
arndale arm-multi_lpae_defconfig : OFFLINE 2:29.17 arndale arm-multi_v7_nosmp_defconfig : OFFLINE 2:06.65 bbb arm-multi_v7_defconfig : OFFLINE 1:56.28 bbb arm-multi_v7_nosmp_defconfig : OFFLINE 2:29.31 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 4:33.37 chitra powerpc-pasemi_defconfig : OFFLINE 2:24.42 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:16.86 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:22.39 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:25.63 colombus arm-multi_v7_defconfig : OFFLINE 2:07.74 colombus arm-multi_lpae_defconfig : OFFLINE 1:04.43 cubie arm-multi_v7_nosmp_defconfig : OFFLINE 2:08.19 cubie2 arm-multi_lpae_defconfig : OFFLINE 2:31.18 cubox arm-mvebu_v7_defconfig : OFFLINE 2:39.23 dalmore arm-tegra_defconfig : OFFLINE 2:24.01 dalmore arm-multi_v7_defconfig : OFFLINE 3:50.57 dalmore arm-multi_lpae_defconfig : OFFLINE 4:04.51 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.17 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 3:19.35 hummingboard arm-multi_v7_defconfig : OFFLINE 3:37.18 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.82 jetsontk1 arm-multi_lpae_defconfig : OFFLINE 4:29.50 minnowmax x86-minnowmax_defconfig : OFFLINE 2:30.53 odroidu3 arm-multi_v7_defconfig : OFFLINE 2:10.85 pit arm-multi_lpae_defconfig : OFFLINE 2:39.53 pit arm-multi_v7_nosmp_defconfig : OFFLINE 2:41.10 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:06.91 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:53.92 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 1:48.83 sama5 arm-sama5_defconfig : OFFLINE 2:29.02 sama5d3-xplained arm-sama5_defconfig : OFFLINE 3:22.34 seaboard arm-multi_v7_defconfig : OFFLINE 2:06.55 seattle arm64-defconfig : OFFLINE 2:09.28 snow arm-exynos_defconfig : OFFLINE 3:36.40 snow arm-multi_v7_defconfig : OFFLINE 2:58.06 snow arm-multi_lpae_defconfig : OFFLINE 2:17.86 snow arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.45 socfpga arm-socfpga_defconfig : OFFLINE 2:37.91 socfpga arm-multi_v7_defconfig : OFFLINE 2:24.03 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:51.65 trimslice arm-tegra_defconfig : OFFLINE 3:53.99 wandboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.39
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.057850] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.064174] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.071048] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.080641] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.090136] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.097152] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.140730] ledtrig-cpu: registered to indicate activity on CPUs [ 2.148900] oprofile: using arm/armv7 [ 2.154085] Initializing XFRM netlink socket [ 2.159163] NET: Registered protocol family 10 [ 2.169584] sit: IPv6 over IPv4 tunneling driver [ 2.178382] NET: Registered protocol family 17 [ 2.183313] NET: Registered protocol family 15 [ 2.188618] Key type dns_resolver registered [ 2.193564] omap_voltage_late_init: Voltage driver support not added [ 2.200306] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.208772] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.219054] ThumbEE CPU extension supported. [ 2.223704] Registering SWP/SWPB emulation handler [ 2.228737] SmartReflex Class3 initialized [ 2.285714] mmc1: MAN_BKOPS_EN bit is not set [ 2.295666] mmc1: new high speed MMC card at address 0001 [ 2.307253] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.317605] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.328324] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.344216] mmcblk0: p1 p2 [ 2.367355] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.374690] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.387319] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.395642] hctosys: unable to open rtc device (rtc0) [ 2.401075] sr_init: No PMIC hook to init smartreflex [ 2.406727] sr_init: platform driver register failed for SR [ 2.451883] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [bbb 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:54]: got exception: timeout ~$off
[PYBOOT] [bbb 01:55]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.571582] NET: Registered protocol family 10 [ 1.576840] sit: IPv6 over IPv4 tunneling driver [ 1.582144] NET: Registered protocol family 17 [ 1.586806] can: controller area network core (rev 20120528 abi 9) [ 1.593313] NET: Registered protocol family 29 [ 1.597967] can: raw protocol (rev 20120528) [ 1.602438] can: broadcast manager protocol (rev 20120528 t) [ 1.608362] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614397] Key type dns_resolver registered [ 1.618951] omap_voltage_late_init: Voltage driver support not added [ 1.626098] Power Management for TI OMAP4+ devices. [ 1.631401] ThumbEE CPU extension supported. [ 1.635893] Registering SWP/SWPB emulation handler [ 1.642714] palmas 0-0058: Irq flag is 0x00000008 [ 1.667229] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698684] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.712838] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735547] rtc-ds1307 2-006f: SET TIME! [ 1.741271] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.748027] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752635] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761448] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.796029] vdd_3v3: supplied by regen1 [ 1.836963] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854072] aic_dvdd_fixed: disabling [ 1.858080] ldousb: disabling [ 1.862119] Waiting for root device /dev/mmcblk1p1... [ 1.869636] mmc1: MAN_BKOPS_EN bit is not set [ 1.881645] mmc1: new high speed MMC card at address 0001 [ 1.887634] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892526] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898878] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905749] mmcblk0: p1
[PYBOOT] [beagleboard-x15 02:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 02:10]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 02:11]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.571579] NET: Registered protocol family 10 [ 1.576849] sit: IPv6 over IPv4 tunneling driver [ 1.582121] NET: Registered protocol family 17 [ 1.586787] can: controller area network core (rev 20120528 abi 9) [ 1.593296] NET: Registered protocol family 29 [ 1.597955] can: raw protocol (rev 20120528) [ 1.602428] can: broadcast manager protocol (rev 20120528 t) [ 1.608360] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614398] Key type dns_resolver registered [ 1.618947] omap_voltage_late_init: Voltage driver support not added [ 1.626091] Power Management for TI OMAP4+ devices. [ 1.631398] ThumbEE CPU extension supported. [ 1.635888] Registering SWP/SWPB emulation handler [ 1.642713] palmas 0-0058: Irq flag is 0x00000008 [ 1.667245] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698836] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.713004] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735565] rtc-ds1307 2-006f: SET TIME! [ 1.741322] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.748068] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752674] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761492] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.796034] vdd_3v3: supplied by regen1 [ 1.836979] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854118] aic_dvdd_fixed: disabling [ 1.858137] ldousb: disabling [ 1.862173] Waiting for root device /dev/mmcblk1p1... [ 1.869671] mmc1: MAN_BKOPS_EN bit is not set [ 1.881717] mmc1: new high speed MMC card at address 0001 [ 1.887704] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892593] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898946] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905816] mmcblk0: p1
[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:47]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.455726] NET: Registered protocol family 10 [ 1.460977] sit: IPv6 over IPv4 tunneling driver [ 1.466147] NET: Registered protocol family 17 [ 1.470813] can: controller area network core (rev 20120528 abi 9) [ 1.477300] NET: Registered protocol family 29 [ 1.481958] can: raw protocol (rev 20120528) [ 1.486428] can: broadcast manager protocol (rev 20120528 t) [ 1.492352] can: netlink gateway (rev 20130117) max_hops=1 [ 1.498315] Key type dns_resolver registered [ 1.502863] omap_voltage_late_init: Voltage driver support not added [ 1.509802] Power Management for TI OMAP4+ devices. [ 1.515068] ThumbEE CPU extension supported. [ 1.519652] ata1: SATA link down (SStatus 0 SControl 300) [ 1.526559] palmas 0-0058: Irq flag is 0x00000008 [ 1.551193] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.579293] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.592575] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.614762] rtc-ds1307 2-006f: SET TIME! [ 1.620383] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.627085] rtc-ds1307 2-006f: 64 bytes nvram [ 1.631666] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.639471] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.674957] vdd_3v3: supplied by regen1 [ 1.710109] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.722611] aic_dvdd_fixed: disabling [ 1.726611] ldousb: disabling [ 1.730397] Waiting for root device /dev/mmcblk1p1... [ 1.768871] mmc1: MAN_BKOPS_EN bit is not set [ 1.780857] mmc1: new high speed MMC card at address 0001 [ 1.786735] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.791567] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.797855] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.804594] mmcblk0: p1
[PYBOOT] [beagleboard-x15 03:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 03:48]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 03:49]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.178471] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.188852] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.193706] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.199993] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.206852] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.216443] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.225935] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.232977] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.282668] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.288963] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.295829] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.305414] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.314904] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.321939] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.328060] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.334363] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.341242] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.350859] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.360362] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.367435] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.374249] vdd_3v3: supplied by regen1 [ 2.412959] hctosys: unable to open rtc device (rtc0) [ 2.418263] sr_init: No PMIC hook to init smartreflex [ 2.423808] sr_init: platform driver register failed for SR [ 2.467011] mmc1: MAN_BKOPS_EN bit is not set [ 2.475772] aic_dvdd_fixed: disabling [ 2.480065] ldousb: disabling [ 2.484459] mmc1: new high speed MMC card at address 0001 [ 2.490813] Waiting for root device /dev/mmcblk1p1... [ 2.492188] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.492855] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.493593] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.513625] mmcblk0: p1
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.178349] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.183932] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.191027] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.201027] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.210351] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.215838] vdd_1v8_gen: supplied by vdd_5v_in [ 3.222695] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.229319] [drm] No driver support for vblank timestamp query. [ 3.235268] drm drm: No connectors reported connected with modes [ 3.241282] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.266717] Console: switching to colour frame buffer device 128x48 [ 3.278745] drm drm: fb0: frame buffer device [ 3.293282] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.301766] usb3_vbus: supplied by vdd_5v_in [ 3.308141] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.314607] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.320017] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.327843] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.343294] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.350149] hub 1-0:1.0: USB hub found [ 3.353930] hub 1-0:1.0: 1 port detected [ 3.358771] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.364192] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.371959] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.388284] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.395058] hub 2-0:1.0: USB hub found [ 3.398830] hub 2-0:1.0: 1 port detected [ 3.407290] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.421072] vdd_sata,avdd_plle: disabling [ 3.425517] usb1_vbus: disabling [ 3.429561] Waiting for root device /dev/mmcblk1p1... [ 3.708292] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.646798] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:57]: got exception: timeout ~$off
[PYBOOT] [beaver 01:58]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.603937] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08b6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.613940] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.622822] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.628348] vdd_1v8_gen: supplied by vdd_5v_in [ 3.636740] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.643376] [drm] No driver support for vblank timestamp query. [ 3.649374] drm drm: No connectors reported connected with modes [ 3.655389] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.681708] Console: switching to colour frame buffer device 128x48 [ 3.693479] drm drm: fb0: frame buffer device [ 3.720414] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.727914] usb3_vbus: supplied by vdd_5v_in [ 3.734022] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.740487] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.745903] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.753877] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.770420] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.778117] hub 1-0:1.0: USB hub found [ 3.781910] hub 1-0:1.0: 1 port detected [ 3.786713] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.792146] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.800009] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.820411] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.828000] hub 2-0:1.0: USB hub found [ 3.831782] hub 2-0:1.0: 1 port detected [ 3.840048] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.859035] vdd_sata,avdd_plle: disabling [ 3.863521] usb1_vbus: disabling [ 3.866949] ALSA device list: [ 3.869906] #0: NVIDIA Tegra Beaver [ 3.874188] Waiting for root device /dev/mmcblk1p1... [ 4.150419] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.135769] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:43]: got exception: timeout ~$off
[PYBOOT] [beaver 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 41.641295] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.655683] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 82.490049] random: dd: uninitialized urandom read (512 bytes read, 53 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 86.739320] eth0: device MAC address 36:24:b1:9b:6d:8e [ 86.889213] RX IPC Checksum Offload disabled [ 86.893847] No MAC Management Counters available Listening on LPF/eth0/36:24:b1:9b:6d:8e Sending on LPF/eth0/36:24:b1:9b:6d:8e Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 No DHCPOFFERS received. No working leases in persistent database - sleeping. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c [PYBOOT] [colombus 03:40]: Timed out waiting for "<type 'str'>": . INIT: Entering runlevel: 2 [ [PYBOOT] [colombus 03:41]: got exception: timeout ~$off
[PYBOOT] [colombus 03:42]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.893368] dwmmc_exynos 12550000.mmc: No vqmmc regulator found [ 1.897405] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.906098] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.937412] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.938469] usbcore: registered new interface driver usbhid [ 1.942855] usbhid: USB HID core driver [ 1.953822] NET: Registered protocol family 10 [ 1.959879] sit: IPv6 over IPv4 tunneling driver [ 1.960797] NET: Registered protocol family 17 [ 1.963346] NET: Registered protocol family 15 [ 1.967957] Registering SWP/SWPB emulation handler [ 1.974353] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.978438] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.995039] mmc1: MAN_BKOPS_EN bit is not set [ 1.996359] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.003697] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.013512] mmc1: new DDR MMC card at address 0001 [ 2.018032] max98090 1-0010: MAX98090 REVID=0x43 [ 2.022809] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 2.027348] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.033268] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.039151] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.045657] max98090 1-0010: use default 2.8v micbias [ 2.049724] mmcblk0: p1 p2 [ 2.060251] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.065140] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.092984] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.122322] VDD10_HDMI_1.0V: disabling [ 2.123223] vdd_g3d: disabling [ 2.124247] BUCK8_2.8V: disabling [ 2.128448] ALSA device list: [ 2.129719] #0: Odroid-U3 [ 2.133830] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [odroidu3 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 02:14]: got exception: timeout ~$off
[PYBOOT] [odroidu3 02:15]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.650969] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.657349] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667706] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674171] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679586] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687324] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699424] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.705990] hub 3-0:1.0: USB hub found [ 1.709785] hub 3-0:1.0: 1 port detected [ 1.717123] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.723733] [drm] No driver support for vblank timestamp query. [ 1.730557] mmc2: switch to bus width 2 failed [ 1.756718] mmc2: switch to bus width 1 failed [ 1.761173] mmc2: new high speed MMC card at address 0001 [ 1.774729] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.774839] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.774976] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.775848] mmcblk0: p3 [ 1.823710] Console: switching to colour frame buffer device 170x48 [ 1.861300] drm drm: fb0: frame buffer device [ 1.865778] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.872213] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.879126] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.891131] vdd_1v5: disabling [ 1.894192] vdd_1v2: disabling [ 1.911561] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.925050] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.933377] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.946127] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.970811] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.979663] mmc0: new SDIO card at address 0001 [ 2.510368] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.521636] Waiting for root device /dev/mmcblk2p3...
[PYBOOT] [seaboard 03:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 03:50]: got exception: timeout ~$off
[PYBOOT] [seaboard 03:51]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.805153] Bluetooth: BNEP socket layer initialized [ 1.810186] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.816214] Bluetooth: HIDP socket layer initialized [ 1.822147] Key type dns_resolver registered [ 1.827493] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.833721] Registering SWP/SWPB emulation handler [ 1.839884] mmc0: new SDIO card at address 0001 [ 1.864358] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.871317] VDDIO_HDMI: supplied by vdd_5v0 [ 1.875850] vdd_sys: supplied by vdd_5v0 [ 1.879892] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.884951] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.891826] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.903378] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.909861] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.915366] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.923583] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.940876] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.950586] hub 3-0:1.0: USB hub found [ 1.954694] hub 3-0:1.0: 1 port detected [ 1.964738] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.971374] [drm] No driver support for vblank timestamp query. [ 2.071835] Console: switching to colour frame buffer device 170x48 [ 2.089296] drm drm: fb0: frame buffer device [ 2.120839] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.127802] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.135256] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.164350] vdd_1v5: disabling [ 2.167400] vdd_1v2: disabling [ 2.170554] ALSA device list: [ 2.173531] #0: NVIDIA Tegra Seaboard [ 2.392817] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.404280] Waiting for root device /dev/mmcblk2p3...
[PYBOOT] [seaboard 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 02:02]: got exception: timeout ~$off
[PYBOOT] [seaboard 02:03]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.942474] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 1.942626] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 1.958496] mmcblk0: p1 p2 p3 p4 [ 1.975799] NET: Registered protocol family 10 [ 1.981109] sit: IPv6 over IPv4 tunneling driver [ 1.986358] NET: Registered protocol family 17 [ 1.990844] can: controller area network core (rev 20120528 abi 9) [ 1.997100] NET: Registered protocol family 29 [ 2.001556] can: raw protocol (rev 20120528) [ 2.005828] can: broadcast manager protocol (rev 20120528 t) [ 2.011505] can: netlink gateway (rev 20130117) max_hops=1 [ 2.017517] Key type dns_resolver registered [ 2.021972] ThumbEE CPU extension supported. [ 2.026245] Registering SWP/SWPB emulation handler [ 2.033508] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.040252] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.049407] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.056427] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.063446] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.070434] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.083984] db8500-esram12: disabling [ 2.087799] db8500-esram34: disabling [ 2.091766] V-CSI/DSI: disabling [ 2.095031] mmci-reg: disabling [ 2.098724] uart-pl011 80007000.uart: DMA channel TX dma0chan8 [ 2.104614] uart-pl011 80007000.uart: DMA channel RX dma0chan9 [ 2.110778] Waiting for root device /dev/mmcblk3p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 03:16]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:17]: got exception: timeout ~$off
[PYBOOT] [snowball 03:18]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.898254] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.908081] ledtrig-cpu: registered to indicate activity on CPUs [ 1.914520] usbcore: registered new interface driver usbhid [ 1.920104] usbhid: USB HID core driver [ 1.931335] NET: Registered protocol family 10 [ 1.937774] sit: IPv6 over IPv4 tunneling driver [ 1.943450] NET: Registered protocol family 17 [ 1.947967] can: controller area network core (rev 20120528 abi 9) [ 1.954284] NET: Registered protocol family 29 [ 1.958770] can: raw protocol (rev 20120528) [ 1.963073] can: broadcast manager protocol (rev 20120528 t) [ 1.968749] can: netlink gateway (rev 20130117) max_hops=1 [ 1.975006] Key type dns_resolver registered [ 1.979614] ThumbEE CPU extension supported. [ 1.989532] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.996246] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.005371] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.012359] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.019348] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.026336] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.038299] db8500-esram12: disabling [ 2.042083] db8500-esram34: disabling [ 2.045989] V-CSI/DSI: disabling [ 2.049255] mmci-reg: disabling [ 2.052917] uart-pl011 80007000.uart: DMA channel TX dma0chan8 [ 2.058807] uart-pl011 80007000.uart: DMA channel RX dma0chan9 [ 2.064910] Waiting for root device /dev/mmcblk3p4... [ 2.113586] mmc3: new high speed MMC card at address 0001 [ 2.119567] mmcblk0: mmc3:0001 3.53 GiB [ 2.123931] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 2.129577] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 2.135192] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 2.141784] mmcblk0: p1 p2 p3 p4
[PYBOOT] [snowball 03:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:15]: got exception: timeout ~$off
[PYBOOT] [snowball 03:16]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.544891] iio iio:device1: Full-scale not possible [ 2.550903] iio iio:device1: registered pressure sensor lps001wp [ 2.557495] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.563659] coresight-etb10 801a4000.etb: ETB initialized [ 2.569458] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.575988] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.583404] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.589630] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.602630] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.613403] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.623321] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.634033] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.657653] NET: Registered protocol family 10 [ 2.663726] sit: IPv6 over IPv4 tunneling driver [ 2.669860] NET: Registered protocol family 17 [ 2.674468] NET: Registered protocol family 35 [ 2.679077] NET: Registered protocol family 37 [ 2.683715] Registering SWP/SWPB emulation handler [ 2.690429] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.701751] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-01-01 00:00:28 UTC (946684828) [ 2.711059] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.718078] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.725128] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.732116] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.746063] db8500-esram12: disabling [ 2.749816] db8500-esram34: disabling [ 2.753784] V-CSI/DSI: disabling [ 2.757049] mmci-reg: disabling [ 2.760345] ALSA device list: [ 2.763336] #0: MOP500-card [ 2.766662] uart-pl011 80007000.uart: DMA channel TX dma0chan12 [ 2.772644] uart-pl011 80007000.uart: DMA channel RX dma0chan13 [ 2.778808] Waiting for root device /dev/mmcblk3p4...
[PYBOOT] [snowball 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:05]: got exception: timeout ~$off
[PYBOOT] [snowball 02:06]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter